Attachment 306399 Details for Bug 439609 – syslog from the attachment 306262

syslog from the attachment 306262

syslog (text/plain), 34.07 KB, created by Matěj Cepl on 2008-05-22 16:29:38 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Matěj Cepl

Created: 2008-05-22 16:29:38 UTC

Size: 34.07 KB

patch

obsolete

><6>Initializing cgroup subsys cpuset
><6>Initializing cgroup subsys cpu
><5>Linux version 2.6.25-14.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Thu May 1 06:06:21 EDT 2008
><6>Command line: initrd=initrd.img irqpoll BOOT_IMAGE=vmlinuz 
><6>BIOS-provided physical RAM map:
><6> BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
><6> BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
><6> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
><6> BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
><6> BIOS-e820: 00000000cfe90000 - 00000000cfee3000 (ACPI NVS)
><6> BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
><6> BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
><6> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
><6> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
><6> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
><7>Entering add_active_range(0, 0, 158) 0 entries of 3200 used
><7>Entering add_active_range(0, 256, 851600) 1 entries of 3200 used
><7>Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
><6>end_pfn_map = 1245184
><6>DMI 2.5 present.
><4>ACPI: RSDP 000F97A0, 0024 (r2 DELL  )
><4>ACPI: XSDT CFEE3080, 005C (r1 DELL    FX09    42302E31 AWRD        0)
><4>ACPI: FACP CFEE7200, 00F4 (r3 DELL    FX09    42302E31 AWRD        0)
><4>ACPI: DSDT CFEE3200, 3FFC (r1 DELL   AWRDACPI     1000 MSFT  3000000)
><4>ACPI: FACS CFE90000, 0040
><4>ACPI: HPET CFEE73C0, 0038 (r1 DELL    FX09    42302E31 AWRD       98)
><4>ACPI: MCFG CFEE7400, 003C (r1 DELL    FX09    42302E31 AWRD        0)
><4>ACPI: SLIC CFEE7440, 0176 (r1 DELL    FX09    42302E31 AWRD        0)
><4>ACPI: DMY2 CFEE75C0, 0080 (r1 DELL    FX09    42302E31 AWRD        0)
><4>ACPI: APIC CFEE7300, 0084 (r1 DELL    FX09    42302E31 AWRD        0)
><4>ACPI: SSDT CFEE7F60, 0380 (r1  PmRef    CpuPm     3000 INTL 20041203)
><6>No NUMA configuration found
><6>Faking a node at 0000000000000000-0000000130000000
><7>Entering add_active_range(0, 0, 158) 0 entries of 3200 used
><7>Entering add_active_range(0, 256, 851600) 1 entries of 3200 used
><7>Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
><6>Bootmem setup node 0 0000000000000000-0000000130000000
><6>  NODE_DATA [000000000000e000 - 0000000000015fff]
><6>  bootmap [0000000000016000 -  000000000003bfff] pages 26
><6>early res: 0 [0-fff] BIOS data page
><6>early res: 1 [6000-7fff] SMP_TRAMPOLINE
><6>early res: 2 [200000-75db3b] TEXT DATA BSS
><6>early res: 3 [7f685000-7ffff468] RAMDISK
><6>early res: 4 [9e800-9f7ff] EBDA
><6>early res: 5 [8000-dfff] PGTABLE
><7> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
><7> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
><7> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
><7> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
><7> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
><7> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
><7> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
><7> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
><7> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
><7> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
><7> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
><7> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
><7> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
><7> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
><7> [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
><7> [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
><7> [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
><7> [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
><7> [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
><7> [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
><7> [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
><7> [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0
><7> [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0
><7> [ffffe20003800000-ffffe200039fffff] PMD ->ffff810006e00000 on node 0
><7> [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810007200000 on node 0
><7> [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810007600000 on node 0
><7> [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810007a00000 on node 0
><7> [ffffe20004000000-ffffe200041fffff] PMD ->ffff810007e00000 on node 0
><7> [ffffe20004200000-ffffe200043fffff] PMD ->ffff810008200000 on node 0
><4>Zone PFN ranges:
><4>  DMA             0 ->     4096
><4>  DMA32        4096 ->  1048576
><4>  Normal    1048576 ->  1245184
><4>Movable zone start PFN for each node
><4>early_node_map[3] active PFN ranges
><4>    0:        0 ->      158
><4>    0:      256 ->   851600
><4>    0:  1048576 ->  1245184
><7>On node 0 totalpages: 1048110
><7>  DMA zone: 56 pages used for memmap
><7>  DMA zone: 1385 pages reserved
><7>  DMA zone: 2557 pages, LIFO batch:0
><7>  DMA32 zone: 14280 pages used for memmap
><7>  DMA32 zone: 833224 pages, LIFO batch:31
><7>  Normal zone: 2688 pages used for memmap
><7>  Normal zone: 193920 pages, LIFO batch:31
><7>  Movable zone: 0 pages used for memmap
><6>ACPI: PM-Timer IO Port: 0x408
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
><6>Processor #0 (Bootup-CPU)
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
><6>Processor #1
><6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
><6>Processor #3
><6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
><6>Processor #2
><6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
><6>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
><6>IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><7>ACPI: IRQ0 used by override.
><7>ACPI: IRQ2 used by override.
><7>ACPI: IRQ9 used by override.
><6>Setting APIC routing to flat
><6>ACPI: HPET id: 0x8086a201 base: 0xfed00000
><6>Using ACPI (MADT) for SMP configuration information
><6>PM: Registered nosave memory: 000000000009e000 - 000000000009f000
><6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
><6>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
><6>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
><6>PM: Registered nosave memory: 00000000cfe90000 - 00000000cfee3000
><6>PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
><6>PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
><6>PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
><6>PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
><6>PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
><6>PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
><6>Allocating PCI resources starting at d0000000 (gap: cff00000:10100000)
><6>SMP: Allowing 4 CPUs, 0 hotplug CPUs
><6>PERCPU: Allocating 45232 bytes of per cpu data
><4>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1029701
><4>Policy zone: Normal
><5>Kernel command line: initrd=initrd.img irqpoll BOOT_IMAGE=vmlinuz 
><4>Misrouted IRQ fixup and polling support enabled
><4>This may significantly impact system performance
><4>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 32768 bytes)
><6>TSC calibrated against PM_TIMER
><6>time.c: Detected 2992.498 MHz processor.
><4>Console: colour VGA+ 80x25
><6>console [tty0] enabled
><6>Checking aperture...
><7>Calgary: detecting Calgary via BIOS EBDA area
><7>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
><6>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
><6>Placing software IO TLB between 0x8421000 - 0xc421000
><6>Memory: 4051260k/4980736k available (2656k kernel code, 141180k reserved, 1396k data, 356k init)
><7>CPA: page pool initialized 1 of 1 pages preallocated
><6>SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
><7>hpet clockevent registered
><4>Calibrating delay using timer specific routine.. 6038.73 BogoMIPS (lpj=3019365)
><6>Security Framework initialized
><6>SELinux:  Initializing.
><7>SELinux:  Starting in permissive mode
><6>selinux_register_security:  Registering secondary module capability
><6>Capability LSM initialized as secondary
><6>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
><6>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
><4>Mount-cache hash table entries: 256
><6>Initializing cgroup subsys ns
><6>Initializing cgroup subsys cpuacct
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 4096K
><6>CPU 0/0 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 0
><6>CPU0: Thermal monitoring enabled (TM2)
><6>using mwait in idle threads.
><6>ACPI: Core revision 20070126
><6>Using local APIC timer interrupts.
><7>APIC timer calibration result 20781217
><6>Detected 20.781 MHz APIC timer.
><6>Booting processor 1/4 APIC 0x1
><4>Initializing CPU#1
><4>Calibrating delay using timer specific routine.. 5984.98 BogoMIPS (lpj=2992491)
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 4096K
><6>CPU 1/1 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 1
><6>CPU1: Thermal monitoring enabled (TM2)
><4>Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
><6>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
><6>Booting processor 2/4 APIC 0x3
><4>Initializing CPU#2
><4>Calibrating delay using timer specific routine.. 5985.00 BogoMIPS (lpj=2992502)
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 4096K
><6>CPU 2/3 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 3
><6>CPU2: Thermal monitoring enabled (TM2)
><4>Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
><6>checking TSC synchronization [CPU#0 -> CPU#2]: passed.
><6>Booting processor 3/4 APIC 0x2
><4>Initializing CPU#3
><4>Calibrating delay using timer specific routine.. 5985.00 BogoMIPS (lpj=2992503)
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 4096K
><6>CPU 3/2 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 2
><6>CPU3: Thermal monitoring enabled (TM2)
><4>Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
><6>checking TSC synchronization [CPU#0 -> CPU#3]: passed.
><6>Brought up 4 CPUs
><7>sizeof(vma)=176 bytes
><7>sizeof(page)=56 bytes
><7>sizeof(inode)=560 bytes
><7>sizeof(dentry)=208 bytes
><7>sizeof(ext3inode)=760 bytes
><7>sizeof(buffer_head)=104 bytes
><7>sizeof(skbuff)=224 bytes
><7>sizeof(task_struct)=6272 bytes
><7>CPU0 attaching sched-domain:
><7> domain 0: span 00000000,00000003
><7>  groups: 00000000,00000001 00000000,00000002
><7>  domain 1: span 00000000,0000000f
><7>   groups: 00000000,00000003 00000000,0000000c
><7>   domain 2: span 00000000,0000000f
><7>    groups: 00000000,0000000f
><7>CPU1 attaching sched-domain:
><7> domain 0: span 00000000,00000003
><7>  groups: 00000000,00000002 00000000,00000001
><7>  domain 1: span 00000000,0000000f
><7>   groups: 00000000,00000003 00000000,0000000c
><7>   domain 2: span 00000000,0000000f
><7>    groups: 00000000,0000000f
><7>CPU2 attaching sched-domain:
><7> domain 0: span 00000000,0000000c
><7>  groups: 00000000,00000004 00000000,00000008
><7>  domain 1: span 00000000,0000000f
><7>   groups: 00000000,0000000c 00000000,00000003
><7>   domain 2: span 00000000,0000000f
><7>    groups: 00000000,0000000f
><7>CPU3 attaching sched-domain:
><7> domain 0: span 00000000,0000000c
><7>  groups: 00000000,00000008 00000000,00000004
><7>  domain 1: span 00000000,0000000f
><7>   groups: 00000000,0000000c 00000000,00000003
><7>   domain 2: span 00000000,0000000f
><7>    groups: 00000000,0000000f
><6>net_namespace: 1016 bytes
><4>Time:  8:19:33  Date: 05/21/08
><6>NET: Registered protocol family 16
><6>No dock devices found.
><6>ACPI: bus type pci registered
><6>PCI: Using MMCONFIG at e0000000 - efffffff
><6>PCI: Using configuration type 1
><7>ACPI: EC: Look up EC in DSDT
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S3 S4 S5)
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><6>pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
><6>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
><6>PCI: Transparent bridge - 0000:00:1e.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
><6>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
><6>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
><6>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
><6>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
><6>ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 7 9 10 11 12 14 15)
><6>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 *4 5 7 9 10 11 12 14 15)
><6>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>ACPI: bus type pnp registered
><6>pnp: PnP ACPI: found 11 devices
><6>ACPI: ACPI bus type pnp unregistered
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><6>NetLabel: Initializing
><6>NetLabel:  domain hash size = 128
><6>NetLabel:  protocols = UNLABELED CIPSOv4
><6>NetLabel:  unlabeled traffic allowed by default
><6>PCI-GART: No AMD northbridge found.
><6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
><6>hpet0: 4 64-bit timers, 14318180 Hz
><4>ACPI: RTC can wake from S4
><6>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
><6>system 00:01: ioport range 0x800-0x87f has been reserved
><6>system 00:01: ioport range 0x290-0x297 has been reserved
><6>system 00:01: ioport range 0x880-0x88f has been reserved
><6>system 00:07: ioport range 0x400-0x4bf could not be reserved
><6>system 00:09: iomem range 0xe0000000-0xefffffff could not be reserved
><6>system 00:0a: iomem range 0xf0000-0xfffff could not be reserved
><6>system 00:0a: iomem range 0xcff00000-0xcfffffff has been reserved
><6>system 00:0a: iomem range 0xfed00000-0xfed000ff has been reserved
><6>system 00:0a: iomem range 0xcfe90000-0xcfefffff could not be reserved
><6>system 00:0a: iomem range 0x0-0x9ffff could not be reserved
><6>system 00:0a: iomem range 0x100000-0xcfe8ffff could not be reserved
><6>system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
><6>system 00:0a: iomem range 0xfed14000-0xfed1dfff has been reserved
><6>system 00:0a: iomem range 0xfed20000-0xfed9ffff has been reserved
><6>system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
><6>system 00:0a: iomem range 0xffb00000-0xffb7ffff has been reserved
><6>system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved
><6>system 00:0a: iomem range 0xe0000-0xeffff has been reserved
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: c000-cfff
><6>  MEM window: 0xf8000000-0xfbffffff
><6>  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: d000-dfff
><6>  MEM window: 0xfde00000-0xfdefffff
><6>  PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff
><6>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><6>NET: Registered protocol family 2
><6>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
><6>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
><6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
><6>TCP: Hash tables configured (established 524288 bind 65536)
><6>TCP reno registered
><6>checking if image is initramfs...<7>Switched to high resolution mode on CPU 3
><7>Switched to high resolution mode on CPU 1
><7>Switched to high resolution mode on CPU 2
><7>Switched to high resolution mode on CPU 0
><4> it is
><6>Freeing initrd memory: 9705k freed
><6>audit: initializing netlink socket (disabled)
><5>type=2000 audit(1211357972.678:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
><7>SELinux:  Registering netfilter hooks
><6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>pci 0000:01:00.0: Boot video device
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:01.0:pcie00]
><7>Allocate Port Service[0000:00:01.0:pcie03]
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><6>ACPI: PNP0C0B:00 is registered as cooling_device0
><6>ACPI: Fan [FAN] (on)
><4>ACPI: SSDT CFEE7680, 022A (r1  PmRef  Cpu0Ist     3000 INTL 20041203)
><6>ACPI: ACPI0007:00 is registered as cooling_device1
><4>ACPI: SSDT CFEE7B40, 0152 (r1  PmRef  Cpu1Ist     3000 INTL 20041203)
><6>ACPI: ACPI0007:01 is registered as cooling_device2
><4>ACPI: SSDT CFEE7CA0, 0152 (r1  PmRef  Cpu2Ist     3000 INTL 20041203)
><6>ACPI: ACPI0007:02 is registered as cooling_device3
><4>ACPI: SSDT CFEE7E00, 0152 (r1  PmRef  Cpu3Ist     3000 INTL 20041203)
><6>ACPI: ACPI0007:03 is registered as cooling_device4
><6>ACPI: LNXTHERM:01 is registered as thermal_zone0
><6>ACPI: Thermal Zone [THRM] (40 C)
><7>hpet_resources: 0xfed00000 is busy
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.103
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>brd: module loaded
><6>input: Macintosh mouse button emulation as /devices/virtual/input/input0
><6>PNP: No PS/2 controller found. Probing ports directly.
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
><6>rtc0: alarms up to one month
><6>cpuidle: using governor ladder
><6>cpuidle: using governor menu
><6>usbcore: registered new interface driver hiddev
><6>usbcore: registered new interface driver usbhid
><6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
><6>TCP cubic registered
><6>Initializing XFRM netlink socket
><6>NET: Registered protocol family 1
><6>NET: Registered protocol family 17
><4>registered taskstats version 1
><4>  Magic number: 8:688:321
><4>  hash matches device tty46
><6>Freeing unused kernel memory: 356k freed
><6>Write protecting the kernel read-only data: 1120k
><6>RPC: Registered udp transport module.
><6>RPC: Registered tcp transport module.
><6>loop: module loaded
><4>floppy0: no floppy controllers found
><6>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
><6>input: PC Speaker as /devices/platform/pcspkr/input/input1
><6>squashfs: version 3.3 (2007/10/31) Phillip Lougher
><5>SCSI subsystem initialized
><6>Loading iSCSI transport class v2.0-869.
><5>iscsi: registered transport (tcp)
><6>NET: Registered protocol family 10
><6>lo: Disabled Privacy Extensions
><6>USB Universal Host Controller Interface driver v3.0
><6>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1a.0 to 64
><6>uhci_hcd 0000:00:1a.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
><6>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 2 ports detected
><6>e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
><6>e1000e: Copyright (c) 1999-2007 Intel Corporation.
><7>libata version 3.00 loaded.
><27>May 21 08:19:36 udevd-event[898]: node_symlink: device node '/dev/rtc' already exists, link to '/dev/rtc0' will not overwrite it
><6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: UHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
><6>usb usb1: SerialNumber: 0000:00:1a.0
><6>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
><7>PCI: Setting latency timer of device 0000:00:1a.1 to 64
><6>uhci_hcd 0000:00:1a.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
><6>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 2 ports detected
><6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: UHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
><6>usb usb2: SerialNumber: 0000:00:1a.1
><6>ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:00:1a.2 to 64
><6>uhci_hcd 0000:00:1a.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
><6>uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fc00
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb3: Product: UHCI Host Controller
><6>usb usb3: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
><6>usb usb3: SerialNumber: 0000:00:1a.2
><6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
><7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
><6>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb4: Product: UHCI Host Controller
><6>usb usb4: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
><6>usb usb4: SerialNumber: 0000:00:1d.0
><6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
><6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
><6>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00
><6>usb usb5: configuration #1 chosen from 1 choice
><6>hub 5-0:1.0: USB hub found
><6>hub 5-0:1.0: 2 ports detected
><6>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb5: Product: UHCI Host Controller
><6>usb usb5: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
><6>usb usb5: SerialNumber: 0000:00:1d.1
><6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
><7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
><6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900
><6>usb usb6: configuration #1 chosen from 1 choice
><6>hub 6-0:1.0: USB hub found
><6>hub 6-0:1.0: 2 ports detected
><6>usb 3-1: new low speed USB device using uhci_hcd and address 2
><6>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb6: Product: UHCI Host Controller
><6>usb usb6: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
><6>usb usb6: SerialNumber: 0000:00:1d.2
><6>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
><7>PCI: Setting latency timer of device 0000:00:1a.7 to 64
><6>ehci_hcd 0000:00:1a.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
><7>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
><6>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdffe000
><6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb7: configuration #1 chosen from 1 choice
><6>hub 7-0:1.0: USB hub found
><6>hub 7-0:1.0: 6 ports detected
><6>usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
><6>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb7: Product: EHCI Host Controller
><6>usb usb7: Manufacturer: Linux 2.6.25-14.fc9.x86_64 ehci_hcd
><6>usb usb7: SerialNumber: 0000:00:1a.7
><6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
><7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
><7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
><6>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffd000
><6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb8: configuration #1 chosen from 1 choice
><6>hub 8-0:1.0: USB hub found
><6>hub 8-0:1.0: 6 ports detected
><6>usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
><6>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb8: Product: EHCI Host Controller
><6>usb usb8: Manufacturer: Linux 2.6.25-14.fc9.x86_64 ehci_hcd
><6>usb usb8: SerialNumber: 0000:00:1d.7
><6>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
><7>PCI: Setting latency timer of device 0000:00:19.0 to 64
><6>eth0: (PCI Express:2.5GB/s:Width x1) 00:1d:09:8f:a0:47
><6>eth0: Intel(R) PRO/10/100 Network Connection
><6>eth0: MAC: 5, PHY: 7, PBA No: ffffff-0ff
><6>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
><6>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
><6>ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 19 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:00:1f.5 to 64
><6>ACPI: PCI interrupt for device 0000:00:1f.5 disabled
><7>ata_piix 0000:00:1f.2: version 2.12
><6>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
><6>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
><7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
><6>scsi0 : ata_piix
><6>scsi1 : ata_piix
><6>ata1: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
><6>ata2: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
><3>usb 3-1: device not accepting address 2, error -71
><6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><6>ata1.00: ATA-8: WDC WD5000AAKS-75YGA0, 12.01C02, max UDMA/133
><6>ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
><6>ata1.00: configured for UDMA/133
><6>usb 3-1: new low speed USB device using uhci_hcd and address 4
><6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>usb 3-1: configuration #1 chosen from 1 choice
><6>input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1a.2/usb3/3-1/3-1:1.0/input/input2
><6>input,hidraw0: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1a.2-1
><6>input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1a.2/usb3/3-1/3-1:1.1/input/input3
><6>input,hidraw1: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1a.2-1
><6>usb 3-1: New USB device found, idVendor=0518, idProduct=0001
><6>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 3-1: Product: USB-compliant keyboard
><6>usb 3-1: Manufacturer: Plus More Enterprise LTD.
><7>ata2.01: NODEV after polling detection
><6>ata2.00: ATAPI: TSSTcorp CD-RW/DVD-ROM TS-H493B, D200, max UDMA/33
><6>usb 3-2: new full speed USB device using uhci_hcd and address 5
><6>ata2.00: configured for UDMA/33
><5>scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-7 12.0 PQ: 0 ANSI: 5
><5>scsi 1:0:0:0: CD-ROM            TSSTcorp CDRWDVD TS-H493B D200 PQ: 0 ANSI: 5
><6>ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 19 (level, low) -> IRQ 19
><6>ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
><7>PCI: Setting latency timer of device 0000:00:1f.5 to 64
><6>scsi2 : ata_piix
><6>scsi3 : ata_piix
><6>ata3: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19
><6>ata4: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19
><6>usb 3-2: configuration #1 chosen from 1 choice
><6>input: Razer DeathAdder as /devices/pci0000:00/0000:00:1a.2/usb3/3-2/3-2:1.0/input/input4
><6>input,hidraw2: USB HID v1.11 Mouse [Razer DeathAdder] on usb-0000:00:1a.2-2
><6>usb 3-2: New USB device found, idVendor=1532, idProduct=0007
><6>usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 3-2: Product: DeathAdder
><6>usb 3-2: Manufacturer: Razer
><6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>ata3.00: ATAPI: TSSTcorp DVD+/-RW TS-H653B, D300, max UDMA/100
><6>ata3.00: applying bridge limits
><6>ata3.00: configured for UDMA/100
><6>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><6>ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01107, max UDMA7
><6>ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
><6>ata4.00: configured for UDMA/133
><5>scsi 2:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-H653B D300 PQ: 0 ANSI: 5
><5>scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HD753LJ  1AA0 PQ: 0 ANSI: 5
><4>Driver 'sd' needs updating - please use bus_type methods
><5>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda:<4>Driver 'sr' needs updating - please use bus_type methods
><4> sda1 sda2 sda3
><5>sd 0:0:0:0: [sda] Attached SCSI disk
><4>sr0: scsi3-mmc drive: 125x/125x writer cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 1:0:0:0: Attached scsi CD-ROM sr0
><4>sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
><7>sr 2:0:0:0: Attached scsi CD-ROM sr1
><5>sd 3:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
><5>sd 3:0:0:0: [sdb] Write Protect is off
><7>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
><5>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 3:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
><5>sd 3:0:0:0: [sdb] Write Protect is off
><7>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
><5>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: sdb1
><5>sd 0:0:0:0: Attached scsi generic sg0 type 0
><5>sd 3:0:0:0: [sdb] Attached SCSI disk
><5>sr 1:0:0:0: Attached scsi generic sg1 type 5
><5>sr 2:0:0:0: Attached scsi generic sg2 type 5
><5>sd 3:0:0:0: Attached scsi generic sg3 type 0
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><4>ISOFS: Unable to identify CD-ROM format.
><4>VFS: Can't find an ext2 filesystem on dev loop0.
><7>SELinux:8192 avtab hash slots allocated. Num of rules:172315
><7>SELinux:8192 avtab hash slots allocated. Num of rules:172315
><7>security:  5 users, 12 roles, 2301 types, 116 bools, 1 sens, 1024 cats
><7>security:  72 classes, 172315 rules
><7>SELinux:  Completing initialization.
><7>SELinux:  Setting up existing superblocks.
><7>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
><7>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
><7>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
><7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
><7>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
><7>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
><7>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
><7>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
><7>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
><7>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
><7>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
><7>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
><7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
><7>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
><7>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
><7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
><6>SELinux: policy loaded with handle_unknown=allow
><5>type=1403 audit(1211358011.575:2): policy loaded auid=4294967295 ses=4294967295
><6>md: raid0 personality registered for level 0
><6>md: raid1 personality registered for level 1
><6>xor: automatically using best checksumming function: generic_sse
><6>   generic_sse: 11124.000 MB/sec
><6>xor: using function: generic_sse (11124.000 MB/sec)
><6>async_tx: api initialized (async)
><4>raid6: int64x1   2933 MB/s
><4>raid6: int64x2   3726 MB/s
><4>raid6: int64x4   2789 MB/s
><4>raid6: int64x8   2566 MB/s
><4>raid6: sse2x1    4683 MB/s
><4>raid6: sse2x2    5625 MB/s
><4>raid6: sse2x4    8968 MB/s
><4>raid6: using algorithm sse2x4 (8968 MB/s)
><6>md: raid6 personality registered for level 6
><6>md: raid5 personality registered for level 5
><6>md: raid4 personality registered for level 4
><6>md: raid10 personality registered for level 10
><6>md: linear personality registered for level -1
><4>GFS2 (built May  1 2008 06:08:13) installed
><6>Lock_Nolock (built May  1 2008 06:08:34) installed
><6>JFS: nTxBlock = 8192, nTxLock = 65536
><6>SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
><6>SGI XFS Quota Management subsystem
><6>device-mapper: uevent: version 1.0.3
><6>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
><6>device-mapper: multipath: version 1.0.5 loaded
><6>device-mapper: multipath round-robin: version 1.0.0 loaded
><6>device-mapper: multipath emc: version 0.0.3 loaded
><4>mtrr: base(0xd0000000) is not aligned on a size(0xff00000) boundary

Actions: View

Attachments on bug 439609: 306262 | 306398 | 306399 | 306400 | 306401