Attachment 306412 Details for Bug 447231 – Serial console output from working FC10 initrd

Serial console output from working FC10 initrd

goodinitrd.txt (text/plain), 25.48 KB, created by Clyde E. Kunkel on 2008-05-22 19:05:46 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Clyde E. Kunkel

Created: 2008-05-22 19:05:46 UTC

Size: 25.48 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25.2-5.fc10.i686 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Wed May 7 18:06:55 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
> BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
> BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
> BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
> BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>found SMP MP-table at [c00ff780] 000ff780
>Using x86 segment limits to approximate NX protection
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524160
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   524160
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000FBB80, 0024 (r2 ACPIAM)
>ACPI: XSDT 7FF80100, 0054 (r1 A_M_I_ OEMXSDT  12000710 MSFT       97)
>ACPI: FACP 7FF80290, 00F4 (r3 A_M_I_ OEMFACP  12000710 MSFT       97)
>ACPI: DSDT 7FF805C0, 90CD (r1  A0812 A0812001        1 INTL 20060113)
>ACPI: FACS 7FF8E000, 0040
>ACPI: APIC 7FF80390, 006C (r1 A_M_I_ OEMAPIC  12000710 MSFT       97)
>ACPI: MCFG 7FF80400, 003C (r1 A_M_I_ OEMMCFG  12000710 MSFT       97)
>ACPI: OEMB 7FF8E040, 0081 (r1 A_M_I_ AMI_OEM  12000710 MSFT       97)
>ACPI: HPET 7FF89690, 0038 (r1 A_M_I_ OEMHPET  12000710 MSFT       97)
>ACPI: OSFR 7FF896D0, 00B0 (r1 A_M_I_ OEMOSFR  12000710 MSFT       97)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0xffffffff base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
>PM: Registered nosave memory: 000000000009e000 - 000000000009f000
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
>PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520065
>Kernel command line: ro root=/dev/VolGroup00/fedora9 noresume console=ttyS0,9600
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07b9000 soft=c0799000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2666.711 MHz processor.
>Console: colour VGA+ 80x25
>console [ttyS0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2070272k/2096640k available (2237k kernel code, 25120k reserved, 1120k data, 284k init, 1179136k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc074f000 - 0xc0796000   ( 284 kB)
>      .data : 0xc062f555 - 0xc0747800   (1120 kB)
>      .text : 0xc0400000 - 0xc062f555   (2237 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 5336.32 BogoMIPS (lpj=2668163)
>Security Framework initialized
>SELinux:  Initializing.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using mwait in idle threads.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz stepping 0b
>Booting processor 1/1 ip 4000
>CPU 1 irqstacks, hard=c07ba000 soft=c079a000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5320.25 BogoMIPS (lpj=2660128)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz stepping 0b
>Total of 2 processors activated (10656.58 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 13:42:24  Date: 05/22/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  D5, should be CC [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
>system 00:07: ioport range 0x290-0x297 has been reserved
>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
>system 00:08: ioport range 0x800-0x87f has been reserved
>system 00:08: ioport range 0x480-0x4bf has been reserved
>system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
>system 00:08: iomem range 0xffa00000-0xffafffff has been reserved
>system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
>system 00:08: iomem range 0xffe00000-0xffefffff could not be reserved
>system 00:08: iomem range 0xfff00000-0xfffffffe could not be reserved
>system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0e: iomem range 0x0-0x9ffff could not be reserved
>system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
>system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
>system 00:0e: iomem range 0x0-0x0 could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: 0xfe800000-0xfe8fffff
>  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff
>PCI: Bridge: 0000:00:1c.4
>  IO window: e000-efff
>  MEM window: 0xfea00000-0xfeafffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: d000-dfff
>  MEM window: 0xfe900000-0xfe9fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: 0xfeb00000-0xfebfffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3289k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1211463740.509:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 7FF8E0D0, 01D2 (r1    AMI   CPU1PM        1 INTL 20060113)
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: SSDT 7FF8E2B0, 0143 (r1    AMI   CPU2PM        1 INTL 20060113)
>ACPI: ACPI0007:01 is registered as cooling_device1
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 8:708:736
>  hash matches drivers/base/power/main.c:143
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 908k
>Red Hat nash version 6.0.52 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Setting up hotplug.
>Creating block dACPI: PCI Interrupt 0000:00:1a.7[C] -> evice nodes.
>LoGSI 18 (level, low) -> IRQ 18
>ading ehci-hcd mehci_hcd 0000:00:1a.7: EHCI Host Controller
>odule
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25.2-5.fc10.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7ff800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25.2-5.fc10.i686 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>Loading ohci-hcdUSB Universal Host Controller Interface driver v3.0
> module
>LoadingACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
> uhci-hcd moduleuhci_hcd 0000:00:1a.0: UHCI Host Controller
>
>hub 2-0:1.0: unable to enumerate USB device on port 6
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25.2-5.fc10.i686 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25.2-5.fc10.i686 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25.2-5.fc10.i686 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1a.2
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25.2-5.fc10.i686 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25.2-5.fc10.i686 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: UHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.25.2-5.fc10.i686 uhci_hcd
>usb usb8: SerialNumber: 0000:00:1d.2
>Loading ext4dev SCSI subsystem initialized
>module
>Loading Driver 'sd' needs updating - please use bus_type methods
>scsi_mod module
>Loading sd_mod ACPI: PCI Interrupt 0000:03:00.1[B] -> <6>usb 8-2: new full speed USB device using uhci_hcd and address 2
>module
>Loading GSI 17 (level, low) -> IRQ 17
>libata module
>LACPI: PCI interrupt for device 0000:03:00.1 disabled
>oading pata_acpi module
>Waitingusb 8-2: configuration #1 chosen from 1 choice
> for driver inithub 8-2:1.0: USB hub found
>ialization.
>hub 8-2:1.0: 4 ports detected
>usb 8-2: New USB device found, idVendor=0557, idProduct=7000
>usb 8-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 8-2.1: new low speed USB device using uhci_hcd and address 3
>usb 8-2.1: configuration #1 chosen from 1 choice
>input: Microsoft Internet Keyboard Pro as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.1/8-2.1:1.0/input/input1
>input,hidraw0: USB HID v1.10 Keyboard [Microsoft Internet Keyboard Pro] on usb-0000:00:1d.2-2.1
>input: Microsoft Internet Keyboard Pro as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.1/8-2.1:1.1/input/input2
>input,hidraw1: USB HID v1.10 Device [Microsoft Internet Keyboard Pro] on usb-0000:00:1d.2-2.1
>usb 8-2.1: New USB device found, idVendor=045e, idProduct=002b
>usb 8-2.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 8-2.1: Product: Microsoft Internet Keyboard Pro
>Loading ata_geneACPI: PCI Interrupt 0000:03:00.1[B] -> ric module
>LoadGSI 17 (level, low) -> IRQ 17
>ing pata_jmicronscsi0 : pata_jmicron
> module
>scsi1 : pata_jmicron
>ata1: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 17
>ata2: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 17
>ata1.00: ATA-8: WDC WD3200AAJB-00WGA0, 00.02C01, max UDMA/100
>ata1.00: 625142448 sectors, multi 0: LBA48 
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200AAJB-0 00.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>Waiting for driver initialization.
>Loading ahci modACPI: PCI Interrupt 0000:00:1f.2[B] -> ule
>GSI 22 (level, low) -> IRQ 22
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part 
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>scsi6 : ahci
>scsi7 : ahci
>ata3: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 22
>ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 22
>ata5: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7fea00 irq 22
>ata6: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7fea80 irq 22
>ata7: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 22
>ata8: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 22
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB02, max UDMA/33, ATAPI AN
>ata3.00: applying bridge limits
>ata3.00: configured for UDMA/33
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: ATA-7: WDC WD1600AAJS-00PSA0, 05.06H05, max UDMA/133
>ata4.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata4.00: configured for UDMA/133
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata7.00: ATA-7: WDC WD1600AAJS-00PSA0, 05.06H05, max UDMA/133
>ata7.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata7.00: configured for UDMA/133
>ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata8.00: ATA-7: WDC WD1600AAJS-00PSA0, 05.06H05, max UDMA/133
>ata8.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata8.00: configured for UDMA/133
>scsi 2:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S183L SB02 PQ: 0 ANSI: 5
>scsi 3:0:0:0: Direct-Access     ATA      WDC WD1600AAJS-0 05.0 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 >
>sd 3:0:0:0: [sdb] Attached SCSI disk
>scsi 6:0:0:0: Direct-Access     ATA      WDC WD1600AAJS-0 05.0 PQ: 0 ANSI: 5
>sd 6:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB)
>sd 6:0:0:0: [sdc] Write Protect is off
>sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 6:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB)
>sd 6:0:0:0: [sdc] Write Protect is off
>sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 sdc9 >
>sd 6:0:0:0: [sdc] Attached SCSI disk
>scsi 7:0:0:0: Direct-Access     ATA      WDC WD1600AAJS-0 05.0 PQ: 0 ANSI: 5
>sd 7:0:0:0: [sdd] 312581808 512-byte hardware sectors (160042 MB)
>sd 7:0:0:0: [sdd] Write Protect is off
>sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 7:0:0:0: [sdd] 312581808 512-byte hardware sectors (160042 MB)
>sd 7:0:0:0: [sdd] Write Protect is off
>sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1 sdd2 sdd3 sdd4 < sdd5 sdd6 >
>sd 7:0:0:0: [sdd] Attached SCSI disk
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>scsi8 : ahci
>scsi9 : ahci
>ata9: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
>ata10: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
>ata9: SATA link down (SStatus 0 SControl 300)
>ata10: SATA link down (SStatus 0 SControl 300)
>Waiting for driver initialization.
>Loading dm-mod mdevice-mapper: uevent: version 1.0.3
>odule
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>Loading dm-mirror module
>Loading dm-zero module
>Loading dm-snapshot module
>Making device-mapper control node
>Scanning logical volumes
>  Reading all physical volumes.  This may take a while...
>  Found volume group "VolGroup02" using metadata type lvm2
>  Found volume group "VolGroup01" using metadata type lvm2
>  Found volume group "VolGroup00" using metadata type lvm2
>Activating logical volumes
>  6 logical volume(s) in volume group "VolGroup00" now active
>noresume passed, not resuming...
>Creating root device.
>Mounting root filesystem.
>kjournald2 starting.  Commit interval 5 seconds
>EXT4-fs: mounted filesystem with ordered data mode.
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>Setting up other filesystems.
>Setting up new root fs
>no fstab.sys, mounting inSELinux:  Disabled at runtime.
>ternal defaults
>
>Switching to new root and running init.
>unmounting old /dev
>unmounting old /proc
>unmounting old /sys
>		Welcome to Fedora 
>		Press 'I' to enter interactive startup.
>Starting udev: [  OK  ]
>Setting hostname P5K-EWIFI.localdomain:  [  OK  ]
>Starting disk encryption:
>[FAILED]
>Setting up Logical Volume Management:   1 logical volume(s) in volume group "VolGroup02" now active
>  5 logical volume(s) in volume group "VolGroup01" now active
>  6 logical volume(s) in volume group "VolGroup00" now active
>[  OK  ]
>Starting disk encryption:
>Enter LUKS passphrase for /dev/VolGroup02/xfceRaw9:

Actions: View

Attachments on bug 447231: 305882 | 306412 | 306418