Attachment 306566 Details for Bug 446763 – dmesg for working kernel

dmesg for working kernel

2.6.24.3-50.fc8-working-dmesg (text/plain), 30.81 KB, created by J on 2008-05-24 10:50:34 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: J

Created: 2008-05-24 10:50:34 UTC

Size: 30.81 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.3-50.fc8 (mockbuild@hammer2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Thu Mar 20 13:39:08 EDT 2008
>Command line: ro root=LABEL=/fc8 rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
> BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
> BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
> BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 851680) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP 000F7BF0, 0014 (r0 IntelR)
>ACPI: RSDT CFEE3040, 002C (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP CFEE30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT CFEE3180, 3FF3 (r1 INTELR AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS CFEE0000, 0040
>ACPI: APIC CFEE71C0, 0090 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>No NUMA configuration found
>Faking a node at 0000000000000000-00000000cfee0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 851680) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-00000000cfee0000
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
> [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
> [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
> [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
> [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
> [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
> [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
> [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
> [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0
> [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   851680
>On node 0 totalpages: 851583
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1327 pages reserved
>  DMA zone: 2616 pages, LIFO batch:0
>  DMA32 zone: 11588 pages used for memmap
>  DMA32 zone: 835996 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
>Processor #6
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
>Processor #7
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x05] address[0xfec10000] gsi_base[24])
>IOAPIC[1]: apic_id 5, address 0xfec10000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at d0000000 (gap: cff00000:2ed00000)
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 42248 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 838612
>Policy zone: DMA32
>Kernel command line: ro root=LABEL=/fc8 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 3000.103 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 3350152k/3406720k available (2491k kernel code, 56180k reserved, 1390k data, 332k init)
>SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>Calibrating delay using timer specific routine.. 6002.72 BogoMIPS (lpj=3001361)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 12500335
>Detected 12.500 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/4 APIC 0x6
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6000.12 BogoMIPS (lpj=3000060)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 1/6 -> Node 0
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 0
>                  Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>SMP alternatives: switching to SMP code
>Booting processor 2/4 APIC 0x1
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 6000.14 BogoMIPS (lpj=3000071)
>CPU: Trace cache: 12K uops
>CPU 2/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>                  Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
>checking TSC synchronization [CPU#0 -> CPU#2]: passed.
>SMP alternatives: switching to SMP code
>Booting processor 3/4 APIC 0x7
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 6000.15 BogoMIPS (lpj=3000075)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 3/7 -> Node 0
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 0
>                  Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
>checking TSC synchronization [CPU#0 -> CPU#3]: passed.
>Brought up 4 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=224 bytes
>sizeof(task_struct)=2224 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000005
>  groups: 00000000,00000001 00000000,00000004
>  domain 1: span 00000000,0000000f
>   groups: 00000000,00000005 00000000,0000000a
>   domain 2: span 00000000,0000000f
>    groups: 00000000,0000000f
>CPU1 attaching sched-domain:
> domain 0: span 00000000,0000000a
>  groups: 00000000,00000002 00000000,00000008
>  domain 1: span 00000000,0000000f
>   groups: 00000000,0000000a 00000000,00000005
>   domain 2: span 00000000,0000000f
>    groups: 00000000,0000000f
>CPU2 attaching sched-domain:
> domain 0: span 00000000,00000005
>  groups: 00000000,00000004 00000000,00000001
>  domain 1: span 00000000,0000000f
>   groups: 00000000,00000005 00000000,0000000a
>   domain 2: span 00000000,0000000f
>    groups: 00000000,0000000f
>CPU3 attaching sched-domain:
> domain 0: span 00000000,0000000a
>  groups: 00000000,00000008 00000000,00000002
>  domain 1: span 00000000,0000000f
>   groups: 00000000,0000000a 00000000,00000005
>   domain 2: span 00000000,0000000f
>    groups: 00000000,0000000f
>net_namespace: 120 bytes
>Time:  9:02:06  Date: 05/24/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HRB_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnpacpi: exceeded the max number of mem resources. Max:12 Found:12
>pnp: PnP ACPI: found 17 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>DMAR:No DMAR devices found
>PCI-GART: No AMD northbridge found.
>Time: tsc clocksource has been installed.
>system 00:01: ioport range 0xb78-0xb7b has been reserved
>system 00:01: ioport range 0xf78-0xf7b has been reserved
>system 00:01: ioport range 0xa78-0xa7b has been reserved
>system 00:01: ioport range 0xe78-0xe7b has been reserved
>system 00:01: ioport range 0xbbc-0xbbf has been reserved
>system 00:01: ioport range 0xfbc-0xfbf has been reserved
>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
>system 00:01: ioport range 0x294-0x297 has been reserved
>system 00:01: ioport range 0x880-0x88f has been reserved
>system 00:0d: ioport range 0x400-0x4bf could not be reserved
>system 00:10: iomem range 0xcde00-0xcffff has been reserved
>system 00:10: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:10: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:10: iomem range 0xfc000-0xfffff could not be reserved
>system 00:10: iomem range 0xcfee0000-0xcfefffff could not be reserved
>system 00:10: iomem range 0x0-0x9ffff could not be reserved
>system 00:10: iomem range 0x100000-0xcfedffff could not be reserved
>system 00:10: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:10: iomem range 0xfec01000-0xfed8ffff has been reserved
>system 00:10: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:10: iomem range 0xffb00000-0xffb7ffff has been reserved
>system 00:10: iomem range 0xfff00000-0xffffffff has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: f0000000-f2ffffff
>  PREFETCH window: e0000000-efffffff
>PCI: Bridge: 0000:00:03.0
>  IO window: a000-afff
>  MEM window: f3000000-f4ffffff
>  PREFETCH window: f9100000-f91fffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: f5000000-f6ffffff
>  PREFETCH window: f9200000-f92fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: b000-bfff
>  MEM window: f7000000-f8ffffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3249k freed
>audit: initializing netlink socket (disabled)
>audit(1211619726.716:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 3866953E5733719F
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel i875 Chipset.
>agpgart: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Switched to high resolution mode on CPU 2
>Switched to high resolution mode on CPU 3
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 8:710:20
>Freeing unused kernel memory: 332k freed
>Write protecting the kernel read-only data: 1080k
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9000000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:03:03.3[A] -> GSI 25 (level, low) -> IRQ 25
>ehci_hcd 0000:03:03.3: EHCI Host Controller
>ehci_hcd 0000:03:03.3: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:03:03.3: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:03:03.3
>ehci_hcd 0000:03:03.3: irq 25, io mem 0xf6001000
>ehci_hcd 0000:03:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:03:03.0[B] -> GSI 26 (level, low) -> IRQ 26
>ohci_hcd 0000:03:03.0: OHCI Host Controller
>ohci_hcd 0000:03:03.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:03:03.0: irq 26, io mem 0xf6003000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-2: new high speed USB device using ehci_hcd and address 2
>ACPI: PCI Interrupt 0000:03:03.1[B] -> GSI 26 (level, low) -> IRQ 26
>ohci_hcd 0000:03:03.1: OHCI Host Controller
>ohci_hcd 0000:03:03.1: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:03:03.1: irq 26, io mem 0xf6000000
>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-2: configuration #1 chosen from 1 choice
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c400
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c000
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>ata1.00: ATA-5: IC35L060AVER07-0, ER6OA44A, max UDMA/100
>ata1.00: 120103200 sectors, multi 16: LBA 
>ata1.01: ATA-6: WDC WD2000JB-00KFA0, 08.05J08, max UDMA/100
>ata1.01: 390721968 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/100
>ata2.00: ATAPI: Pioneer DVD-ROM ATAPIModel DVD-116  0122, E1.22, max UDMA/66
>ata2.01: ATAPI: RICOH   CD-R/RW MP7125A, 1.00, max MWDMA2
>ata2.00: limited to UDMA/33 due to 40-wire cable
>ata2.00: configured for UDMA/33
>ata2.01: configured for MWDMA2
>scsi 0:0:0:0: Direct-Access     ATA      IC35L060AVER07-0 ER6O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 120103200 512-byte hardware sectors (61493 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 120103200 512-byte hardware sectors (61493 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 0:0:1:0: Direct-Access     ATA      WDC WD2000JB-00K 08.0 PQ: 0 ANSI: 5
>sd 0:0:1:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:1:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4
>sd 0:0:1:0: [sdb] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            PIONEER  DVD-ROM DVD-116  1.22 PQ: 0 ANSI: 5
>scsi 1:0:1:0: CD-ROM            RICOH    CD-R/RW MP7125A  1.00 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0xc800 ctl 0xcc00 bmdma 0xd800 irq 18
>ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xd400 bmdma 0xd808 irq 18
>ata4.00: ATAPI: PIONEER DVD-RW  DVR-212, 1.24, max UDMA/66
>ata4.00: configured for UDMA/66
>scsi 3:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-212  1.24 PQ: 0 ANSI: 5
>sata_promise 0000:04:04.0: version 2.11
>ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 23 (level, low) -> IRQ 23
>scsi4 : sata_promise
>scsi5 : sata_promise
>scsi6 : sata_promise
>scsi7 : sata_promise
>ata5: SATA max UDMA/133 mmio m4096@0xf8026000 port 0xf8026200 irq 23
>ata6: SATA max UDMA/133 mmio m4096@0xf8026000 port 0xf8026280 irq 23
>ata7: SATA max UDMA/133 mmio m4096@0xf8026000 port 0xf8026300 irq 23
>ata8: SATA max UDMA/133 mmio m4096@0xf8026000 port 0xf8026380 irq 23
>ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata5.00: ATA-7: ST3500320AS, SD04, max UDMA/133
>ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
>ata5.00: configured for UDMA/133
>ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata6.00: ATA-7: ST3500320AS, SD04, max UDMA/133
>ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
>ata6.00: configured for UDMA/133
>ata7: SATA link down (SStatus 0 SControl 300)
>ata8: SATA link down (SStatus 0 SControl 0)
>scsi 4:0:0:0: Direct-Access     ATA      ST3500320AS      SD04 PQ: 0 ANSI: 5
>sd 4:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
>sd 4:0:0:0: [sdc] Write Protect is off
>sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
>sd 4:0:0:0: [sdc] Write Protect is off
>sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2
>sd 4:0:0:0: [sdc] Attached SCSI disk
>scsi 5:0:0:0: Direct-Access     ATA      ST3500320AS      SD04 PQ: 0 ANSI: 5
>sd 5:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
>sd 5:0:0:0: [sdd] Write Protect is off
>sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 5:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
>sd 5:0:0:0: [sdd] Write Protect is off
>sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1
>sd 5:0:0:0: [sdd] Attached SCSI disk
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:8192 avtab hash slots allocated.Num of rules:219460
>SELinux:8192 avtab hash slots allocated.Num of rules:219460
>security:  8 users, 12 roles, 2390 types, 115 bools, 1 sens, 1024 cats
>security:  67 classes, 219460 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sdb3, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>audit(1211619741.710:2): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>scsi 1:0:0:0: Attached scsi generic sg2 type 5
>scsi 1:0:1:0: Attached scsi generic sg3 type 5
>scsi 3:0:0:0: Attached scsi generic sg4 type 5
>sd 4:0:0:0: Attached scsi generic sg5 type 0
>sd 5:0:0:0: Attached scsi generic sg6 type 0
>Driver 'sr' needs updating - please use bus_type methods
>i6300ESB timer: initialized (0xffffc20001038000). heartbeat=30 sec (nowayout=0)
>sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
>sr 1:0:1:0: Attached scsi CD-ROM sr1
>intel_rng: FWH not detected
>sr2: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>sr 3:0:0:0: Attached scsi CD-ROM sr2
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a 6300ESB TCO device (Version=1, TCOBASE=0x0460)
>iTCO_wdt: cannot register miscdev on minor=130 (err=-16)
>iTCO_wdt: No card detected
>dvb-usb: found a 'AVerMedia AverTV DVB-T USB 2.0 (A800)' in cold state, will try to load a firmware
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>input: PC Speaker as /class/input/input5
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:02:01.0 to 64
>e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:13:d4:1e:91:c6
>Floppy drive(s): fd0 is 1.44M
>gameport: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 854kHz
>FDC 0 is a post-1991 82077
>parport_pc 00:08: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>udev: renamed network interface eth0 to eth1
>dvb-usb: downloading firmware from file 'dvb-usb-avertv-a800-02.fw'
>usbcore: registered new interface driver dvb_usb_a800
>usb 1-2: USB disconnect, address 2
>dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
>via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
>ACPI: PCI Interrupt 0000:04:09.0[A] -> GSI 21 (level, low) -> IRQ 21
>eth0: VIA Rhine II at 0xf8025000, 00:50:ba:6e:c3:07, IRQ 21.
>eth0: MII PHY found at address 8, status 0x7829 advertising 01e1 Link 41e1.
>ACPI: PCI Interrupt 0000:03:03.4[C] -> GSI 27 (level, low) -> IRQ 27
>firewire_ohci: Added fw-ohci device 0000:03:03.4, OHCI version 1.10
>ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 20 (level, low) -> IRQ 20
>firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI version 1.10
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  169.12  Thu Feb 14 17:51:09 PST 2008
>firewire_core: created device fw0: GUID 0030bd05180005ec, S400
>audit(1211619748.679:3): avc:  denied  { read } for  pid=1536 comm="salsa" name=".asoundrc" dev=sdb3 ino=721725 scontext=system_u:system_r:alsa_t:s0-s0:c0.c1023 tcontext=system_u:object_r:user_home_t:s0 tclass=file
>audit(1211619748.679:4): avc:  denied  { getattr } for  pid=1536 comm="salsa" path="/root/.asoundrc" dev=sdb3 ino=721725 scontext=system_u:system_r:alsa_t:s0-s0:c0.c1023 tcontext=system_u:object_r:user_home_t:s0 tclass=file
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_core: created device fw1: GUID 0011d800003dd6fd, S400
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ALSA sound/pci/ac97/ac97_codec.c:2121: AC'97 0 analog subsections not ready
>intel8x0_measure_ac97_clock: measured 50248 usecs
>intel8x0: clocking to 48000
>usb 1-2: new high speed USB device using ehci_hcd and address 3
>usb 1-2: configuration #1 chosen from 1 choice
>dvb-usb: found a 'AVerMedia AverTV DVB-T USB 2.0 (A800)' in warm state.
>dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
>DVB: registering new adapter (AVerMedia AverTV DVB-T USB 2.0 (A800))
>DVB: registering frontend 0 (DiBcom 3000MC/P)...
>input: IR-receiver inside an USB DVB receiver as /class/input/input6
>dvb-usb: schedule remote query interval to 150 msecs.
>dvb-usb: AVerMedia AverTV DVB-T USB 2.0 (A800) successfully initialized and connected.
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sdb3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb4, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdc1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdc1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdd1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdd1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdc2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdc2, type ext3), uses xattr
>Adding 2096440k swap on /dev/sda6.  Priority:-1 extents:1 across:2096440k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

Actions: View

Attachments on bug 446763: 306566 | 306567 | 306568 | 306569 | 306570 | 306571 | 306572 | 306573 | 306574 | 306983 | 309878