Attachment 306772 Details for Bug 431894 – T61 iwl4965 working failed

T61 iwl4965 working failed

t61-iwl4965-working-failed.txt (text/plain), 149.52 KB, created by Traxtopel on 2008-05-27 13:41:32 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Traxtopel

Created: 2008-05-27 13:41:32 UTC

Size: 149.52 KB

patch

obsolete

>Initializing interface 'wlan0' conf 'leap.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
>Configuration file 'leap.conf' -> '/etc/NetworkManager/ibm-test/leap.conf'
>Reading configuration file '/etc/NetworkManager/ibm-test/leap.conf'
>ctrl_interface='/var/run/wpa_supplicant'
>ap_scan=1
>Line: 3 - start of a new network block
>
>****************************************
>**************WORKING*******************
>****************************************
>scan_ssid=1 (0x1)
>ssid - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>key_mgmt: 0x1
>eap methods - hexdump(len=16): 00 00 00 00 11 00 00 00 00 00 00 00 00 00 00 00
>identity - hexdump_ascii(len=27):
>     67 72 61 6e 74 5f 77 69 6c 6c 69 61 6d 73 6f 6e   grant_williamson
>     40 6e 6c 2e 69 62 6d 2e 63 6f 6d                  @nl.ibm.com     
>password - hexdump_ascii(len=14):
>     ** ** ** ** ** ** ** ** ** ** ** ** ** **         ***************  
>Priority group 0
>   id=0 ssid='IBM'
>Initializing interface (2) 'wlan0'
>Interface wlan0 set UP - waiting a second for the driver to complete initialization
>SIOCGIWRANGE: WE(compiled)=20 WE(source)=21 enc_capa=0xf
>  capabilities: key_mgmt 0xf enc 0xf
>WEXT: Operstate: linkmode=1, operstate=5
>Own MAC address: 00:1f:3b:39:50:17
>wpa_driver_wext_set_wpa
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_countermeasures
>ioctl[SIOCSIWAUTH]: Operation not supported
>WEXT auth param 4 value 0x0 - wpa_driver_wext_set_drop_unencrypted
>RSN: flushing PMKID list in the driver
>Setting scan request: 0 sec 100000 usec
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: KEY_RX entering state NO_KEY_RECEIVE
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>Added interface wlan0
>Ignore event for foreign ifindex 3
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b06 len=8
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Trying to get current scan results first without requesting a new scan to speed up initial association
>ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
>Failed to get scan results
>Failed to get scan results - try scanning again
>Setting scan request: 0 sec 0 usec
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 5 seconds
>EAPOL: disable timer tick
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b19 len=8
>Scan results did not fit - trying larger buffer (8192 bytes)
>Received 4911 bytes of scan results (21 BSSes)
>CTRL-EVENT-SCAN-RESULTS 
>Selecting BSS from priority group 0
>Try to find WPA-enabled AP
>0: 00:0e:83:39:a6:80 ssid='IBM' wpa_ie_len=24 rsn_ie_len=20 caps=0x11
>   selected based on RSN IE
>   selected WPA AP 00:0e:83:39:a6:80 ssid='IBM'
>Try to find non-WPA AP
>Trying to associate with 00:0e:83:39:a6:80 (SSID='IBM' freq=2412 MHz)
>Cancelling scan request
>WPA: clearing own WPA/RSN IE
>Automatic auth_alg selection: 0x1
>RSN: using IEEE 802.11i/D9.0
>WPA: Selected cipher suites: group 4 pairwise 16 key_mgmt 1 proto 2
>WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 05 01 00 00 50 f2 02 01 00 00 50 f2 01 28 00
>WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 05 01 00 00 0f ac 04 01 00 00 0f ac 01 28 00
>WPA: using GTK WEP104
>WPA: using PTK CCMP
>WPA: using KEY_MGMT 802.1X
>WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 05 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00
>No keys have been configured - skip key clearing
>wpa_driver_wext_set_drop_unencrypted
>State: SCANNING -> ASSOCIATING
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>wpa_driver_wext_associate
>Setting authentication timeout: 15 sec 0 usec
>EAPOL: External notification - portControl=Auto
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b06 len=8
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b04 len=12
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b1a len=12
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: ASSOCIATING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: enable timer tick
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RX EAPOL from 00:0e:83:39:a6:80
>RX EAPOL - hexdump(len=51): 01 00 00 2f 01 01 00 2f 01 00 6e 65 74 77 6f 72 6b 69 64 3d 49 42 4d 2c 6e 61 73 69 64 3d 72 63 78 2d 61 70 2d 30 34 74 2d 31 2c 70 6f 72 74 69 64 3d 30
>Setting authentication timeout: 70 sec 0 usec
>EAPOL: Received EAP-Packet frame
>EAPOL: SUPP_PAE entering state RESTART
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>EAPOL: SUPP_PAE entering state AUTHENTICATING
>EAPOL: SUPP_BE entering state REQUEST
>EAPOL: getSuppRsp
>EAP: EAP entering state RECEIVED
>EAP: Received EAP-Request id=1 method=1 vendor=0 vendorMethod=0
>EAP: EAP entering state IDENTITY
>CTRL-EVENT-EAP-STARTED EAP authentication started
>EAP: EAP-Request Identity data - hexdump_ascii(len=42):
>     00 6e 65 74 77 6f 72 6b 69 64 3d 49 42 4d 2c 6e   _networkid=IBM,n
>     61 73 69 64 3d 72 63 78 2d 61 70 2d 30 34 74 2d   asid=rcx-ap-04t-
>     31 2c 70 6f 72 74 69 64 3d 30                     1,portid=0      
>EAP: using real identity - hexdump_ascii(len=27):
>     67 72 61 6e 74 5f 77 69 6c 6c 69 61 6d 73 6f 6e   grant_williamson
>     40 6e 6c 2e 69 62 6d 2e 63 6f 6d                  @nl.ibm.com     
>EAP: EAP entering state SEND_RESPONSE
>EAP: EAP entering state IDLE
>EAPOL: SUPP_BE entering state RESPONSE
>EAPOL: txSuppRsp
>TX EAPOL: dst=00:0e:83:39:a6:80
>TX EAPOL - hexdump(len=36): 01 00 00 20 02 01 00 20 01 67 72 61 6e 74 5f 77 69 6c 6c 69 61 6d 73 6f 6e 40 6e 6c 2e 69 62 6d 2e 63 6f 6d
>EAPOL: SUPP_BE entering state RECEIVE
>RX EAPOL from 00:0e:83:39:a6:80
>RX EAPOL - hexdump(len=47): 01 00 00 2b 01 e5 00 2b 11 01 00 08 75 d0 23 43 94 a3 47 f0 67 72 61 6e 74 5f 77 69 6c 6c 69 61 6d 73 6f 6e 40 6e 6c 2e 69 62 6d 2e 63 6f 6d
>EAPOL: Received EAP-Packet frame
>EAPOL: SUPP_BE entering state REQUEST
>EAPOL: getSuppRsp
>EAP: EAP entering state RECEIVED
>EAP: Received EAP-Request id=229 method=17 vendor=0 vendorMethod=0
>EAP: EAP entering state GET_METHOD
>EAP: Initialize selected EAP method: vendor 0 method 17 (LEAP)
>CTRL-EVENT-EAP-METHOD EAP vendor 0 method 17 (LEAP) selected
>EAP: EAP entering state METHOD
>EAP-LEAP: Processing EAP-Request
>EAP-LEAP: Challenge from AP - hexdump(len=8): 75 d0 23 43 94 a3 47 f0
>EAP-LEAP: Generating Challenge Response
>EAP-LEAP: Response - hexdump(len=24): a9 46 27 e3 ee 37 2c 9b 2f 91 de aa 0a 67 01 5b 4f c7 dd 6f db 38 f4 51
>EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL
>EAP: EAP entering state SEND_RESPONSE
>EAP: EAP entering state IDLE
>EAPOL: SUPP_BE entering state RESPONSE
>EAPOL: txSuppRsp
>TX EAPOL: dst=00:0e:83:39:a6:80
>TX EAPOL - hexdump(len=63): 01 00 00 3b 02 e5 00 3b 11 01 00 18 a9 46 27 e3 ee 37 2c 9b 2f 91 de aa 0a 67 01 5b 4f c7 dd 6f db 38 f4 51 67 72 61 6e 74 5f 77 69 6c 6c 69 61 6d 73 6f 6e 40 6e 6c 2e 69 62 6d 2e 63 6f 6d
>EAPOL: SUPP_BE entering state RECEIVE
>RX EAPOL from 00:0e:83:39:a6:80
>RX EAPOL - hexdump(len=46): 01 00 00 04 03 e5 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>EAPOL: Received EAP-Packet frame
>EAPOL: SUPP_BE entering state REQUEST
>EAPOL: getSuppRsp
>EAP: EAP entering state RECEIVED
>EAP: Received EAP-Success
>EAP: EAP entering state METHOD
>EAP-LEAP: Processing EAP-Success
>EAP-LEAP: Challenge to AP/AS - hexdump(len=8): 64 95 8b e0 64 f0 06 58
>EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL
>EAP: EAP entering state SEND_RESPONSE
>EAP: EAP entering state IDLE
>EAPOL: SUPP_BE entering state RESPONSE
>EAPOL: txSuppRsp
>TX EAPOL: dst=00:0e:83:39:a6:80
>TX EAPOL - hexdump(len=47): 01 00 00 2b 01 e5 00 2b 11 01 00 08 64 95 8b e0 64 f0 06 58 67 72 61 6e 74 5f 77 69 6c 6c 69 61 6d 73 6f 6e 40 6e 6c 2e 69 62 6d 2e 63 6f 6d
>EAPOL: SUPP_BE entering state RECEIVE
>RX EAPOL from 00:0e:83:39:a6:80
>RX EAPOL - hexdump(len=63): 01 00 00 3b 02 e5 00 3b 11 01 00 18 be 7f 8e c1 bd 6e 85 43 2f 51 a9 15 2c 77 3e 26 29 70 e9 b5 e6 c2 e5 14 67 72 61 6e 74 5f 77 69 6c 6c 69 61 6d 73 6f 6e 40 6e 6c 2e 69 62 6d 2e 63 6f 6d
>EAPOL: Received EAP-Packet frame
>EAPOL: SUPP_BE entering state REQUEST
>EAPOL: getSuppRsp
>EAP: EAP entering state RECEIVED
>EAP: Received EAP-Response for LEAP method=17 id=229
>EAP: EAP entering state METHOD
>EAP-LEAP: Processing EAP-Response
>EAP-LEAP: Response from AP - hexdump(len=24): be 7f 8e c1 bd 6e 85 43 2f 51 a9 15 2c 77 3e 26 29 70 e9 b5 e6 c2 e5 14
>EAP: method process -> ignore=FALSE methodState=DONE decision=UNCOND_SUCC
>EAP-LEAP: pw_hash_hash - hexdump(len=16): [REMOVED]
>EAP-LEAP: peer_challenge - hexdump(len=8): 75 d0 23 43 94 a3 47 f0
>EAP-LEAP: peer_response - hexdump(len=24): a9 46 27 e3 ee 37 2c 9b 2f 91 de aa 0a 67 01 5b 4f c7 dd 6f db 38 f4 51
>EAP-LEAP: ap_challenge - hexdump(len=8): 64 95 8b e0 64 f0 06 58
>EAP-LEAP: ap_response - hexdump(len=24): be 7f 8e c1 bd 6e 85 43 2f 51 a9 15 2c 77 3e 26 29 70 e9 b5 e6 c2 e5 14
>EAP-LEAP: master key - hexdump(len=16): [REMOVED]
>EAP: EAP entering state SEND_RESPONSE
>EAP: EAP entering state IDLE
>EAP: EAP entering state SUCCESS
>CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully
>EAPOL: SUPP_BE entering state RECEIVE
>EAPOL: SUPP_BE entering state SUCCESS
>EAPOL: SUPP_BE entering state IDLE
>RX EAPOL from 00:0e:83:39:a6:80
>RX EAPOL - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 01 57 12 1f 40 8c cc 01 64 6c b9 94 56 8a 9c 53 e2 53 d3 39 4b 35 47 e0 51 cc cd f3 4c d9 88 7b 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 89 1a 4e 61 d3 23 da e7 76 6a a5 6a 36 42 16 55
>EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
>IEEE 802.1X RX: version=2 type=3 length=117
>  EAPOL-Key type=2
>  key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
>  key_length=16 key_data_length=22
>  replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 01
>  key_nonce - hexdump(len=32): 57 12 1f 40 8c cc 01 64 6c b9 94 56 8a 9c 53 e2 53 d3 39 4b 35 47 e0 51 cc cd f3 4c d9 88 7b 63
>  key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>  key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
>  key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
>  key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>WPA: RX EAPOL-Key - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 01 57 12 1f 40 8c cc 01 64 6c b9 94 56 8a 9c 53 e2 53 d3 39 4b 35 47 e0 51 cc cd f3 4c d9 88 7b 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 89 1a 4e 61 d3 23 da e7 76 6a a5 6a 36 42 16 55
>State: ASSOCIATED -> 4WAY_HANDSHAKE
>WPA: RX message 1 of 4-Way Handshake from 00:0e:83:39:a6:80 (ver=2)
>RSN: msg 1/4 key data - hexdump(len=22): dd 14 00 0f ac 04 89 1a 4e 61 d3 23 da e7 76 6a a5 6a 36 42 16 55
>RSN: PMKID from Authenticator - hexdump(len=16): 89 1a 4e 61 d3 23 da e7 76 6a a5 6a 36 42 16 55
>RSN: no matching PMKID found
>EAPOL: Requested key length (32) not available (len=16)
>EAPOL: Successfully fetched key (len=16)
>WPA: PMK from EAPOL state machines - hexdump(len=16): [REMOVED]
>RSN: added PMKSA cache entry for 00:0e:83:39:a6:80
>RSN: the new PMK matches with the PMKID
>WPA: Renewed SNonce - hexdump(len=32): d3 64 4d 2f d1 b9 50 69 3d 4b 4f c4 bc e9 d5 47 a5 ad ed b8 af 54 12 d1 a6 cb ce 8c 2d bf 0f 62
>WPA: PTK derivation - A1=00:1f:3b:39:50:17 A2=00:0e:83:39:a6:80
>WPA: PMK - hexdump(len=16): [REMOVED]
>WPA: PTK - hexdump(len=64): [REMOVED]
>WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 05 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00
>WPA: Sending EAPOL-Key 2/4
>WPA: TX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 01 d3 64 4d 2f d1 b9 50 69 3d 4b 4f c4 bc e9 d5 47 a5 ad ed b8 af 54 12 d1 a6 cb ce 8c 2d bf 0f 62 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 25 77 91 3d 5c 0b eb 18 e1 04 5e e1 30 10 3e 60 00 16 30 14 01 00 00 0f ac 05 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00
>RX EAPOL from 00:0e:83:39:a6:80
>RX EAPOL - hexdump(len=155): 02 03 00 97 02 13 ca 00 10 00 00 00 00 00 00 00 02 57 12 1f 40 8c cc 01 64 6c b9 94 56 8a 9c 53 e2 53 d3 39 4b 35 47 e0 51 cc cd f3 4c d9 88 7b 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f2 cb 0d f5 0a 78 a0 4d 95 d1 b5 8c b5 ca 23 39 00 38 7d 3f 60 39 45 02 db 9d 58 38 ee b8 95 75 08 c7 eb a9 b3 59 d2 84 c4 77 b6 b7 13 40 fc 45 8d 76 ed f2 d2 eb 90 17 54 51 ed 45 4f d1 a2 41 09 ea 08 14 86 7a df 2d 7c b8
>EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
>IEEE 802.1X RX: version=2 type=3 length=151
>  EAPOL-Key type=2
>  key_info 0x13ca (ver=2 keyidx=0 rsvd=0 Pairwise Install Ack MIC Secure Encr)
>  key_length=16 key_data_length=56
>  replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 02
>  key_nonce - hexdump(len=32): 57 12 1f 40 8c cc 01 64 6c b9 94 56 8a 9c 53 e2 53 d3 39 4b 35 47 e0 51 cc cd f3 4c d9 88 7b 63
>  key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>  key_rsc - hexdump(len=8): 01 00 00 00 00 00 00 00
>  key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
>  key_mic - hexdump(len=16): f2 cb 0d f5 0a 78 a0 4d 95 d1 b5 8c b5 ca 23 39
>WPA: RX EAPOL-Key - hexdump(len=155): 02 03 00 97 02 13 ca 00 10 00 00 00 00 00 00 00 02 57 12 1f 40 8c cc 01 64 6c b9 94 56 8a 9c 53 e2 53 d3 39 4b 35 47 e0 51 cc cd f3 4c d9 88 7b 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f2 cb 0d f5 0a 78 a0 4d 95 d1 b5 8c b5 ca 23 39 00 38 7d 3f 60 39 45 02 db 9d 58 38 ee b8 95 75 08 c7 eb a9 b3 59 d2 84 c4 77 b6 b7 13 40 fc 45 8d 76 ed f2 d2 eb 90 17 54 51 ed 45 4f d1 a2 41 09 ea 08 14 86 7a df 2d 7c b8
>RSN: encrypted key data - hexdump(len=56): 7d 3f 60 39 45 02 db 9d 58 38 ee b8 95 75 08 c7 eb a9 b3 59 d2 84 c4 77 b6 b7 13 40 fc 45 8d 76 ed f2 d2 eb 90 17 54 51 ed 45 4f d1 a2 41 09 ea 08 14 86 7a df 2d 7c b8
>WPA: decrypted EAPOL-Key key data - hexdump(len=48): [REMOVED]
>State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
>WPA: RX message 3 of 4-Way Handshake from 00:0e:83:39:a6:80 (ver=2)
>WPA: IE KeyData - hexdump(len=48): 30 14 01 00 00 0f ac 05 01 00 00 0f ac 04 01 00 00 0f ac 01 28 00 dd 13 00 0f ac 01 02 00 94 2e 71 12 e3 85 13 6e 1a 24 e3 23 84 dd 00 00 00 00
>WPA: Sending EAPOL-Key 4/4
>WPA: TX EAPOL-Key - hexdump(len=99): 01 03 00 5f 02 03 0a 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7a a5 4c dd 5c cb b1 3e 7f 6e ea fe 09 be ca ba 00 00
>WPA: Installing PTK to the driver.
>wpa_driver_wext_set_key: alg=3 key_idx=0 set_tx=1 seq_len=6 key_len=16
>EAPOL: External notification - portValid=1
>EAPOL: SUPP_PAE entering state AUTHENTICATED
>EAPOL authentication completed successfully
>State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE
>RSN: received GTK in pairwise handshake - hexdump(len=15): [REMOVED]
>WPA: Group Key - hexdump(len=13): [REMOVED]
>WPA: Installing GTK to the driver (keyidx=2 tx=0 len=13).
>WPA: RSC - hexdump(len=0):
>wpa_driver_wext_set_key: alg=1 key_idx=2 set_tx=0 seq_len=0 key_len=13
>WPA: Key negotiation completed with 00:0e:83:39:a6:80 [PTK=CCMP GTK=WEP-104]
>Cancelling scan request
>Cancelling authentication timeout
>State: GROUP_HANDSHAKE -> COMPLETED
>CTRL-EVENT-CONNECTED - Connection to 00:0e:83:39:a6:80 completed (auth) [id=0 id_str=]
>wpa_driver_wext_set_operstate: operstate 0->1 (UP)
>WEXT: Operstate: linkmode=-1, operstate=6
>EAPOL: External notification - portValid=1
>RTM_NEWLINK: operstate=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>EAPOL: startWhen --> 0
>RX ctrl_iface - hexdump_ascii(len=6):
>     53 54 41 54 55 53                                 STATUS
>
>
>****************************************
>**************FAILED********************
>****************************************
>CTRL-EVENT-TERMINATING - signal 2 received
>Removing interface wlan0
>State: COMPLETED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 1->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>wpa_driver_wext_deauthenticate
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>wpa_driver_wext_set_wpa
>wpa_driver_wext_set_drop_unencrypted
>wpa_driver_wext_set_countermeasures
>ioctl[SIOCSIWAUTH]: Operation not supported
>WEXT auth param 4 value 0x0 - No keys have been configured - skip key clearing
>EAP: deinitialize previously used EAP method (17, LEAP) at EAP deinit
>Cancelling scan request
>Cancelling authentication timeout
>WEXT: Operstate: linkmode=0, operstate=6
>z]0;root@lc4eb2774624416:/etc/NetworkManager/ibm-test[root@lc4eb2774624416 ibm-test]# z
>]0;root@lc4eb2774624416:/etc/NetworkManager/ibm-test[root@lc4eb2774624416 ibm-test]# kill %1
>bash: kill: %1: no such job
>]0;root@lc4eb2774624416:/etc/NetworkManager/ibm-test[root@lc4eb2774624416 ibm-test]# dmesg 
>PCI: Enabling device 0000:03:00.0 (0100 -> 0102)
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 66
>PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100102, writing 100106)
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:0e:83:60:04:70
>wlan0: RX authentication from 00:0e:83:60:04:70 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:0e:83:60:04:70
>wlan0: RX AssocResp from 00:0e:83:60:04:70 (capab=0x431 status=0 aid=76)
>wlan0: associated
>wlan0: CTS protection enabled (BSSID=00:0e:83:60:04:70)
>wlan0: switched to short barker preamble (BSSID=00:0e:83:60:04:70)
>wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
>wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
>wlan0: deauthenticate(reason=3)
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>PCI: Enabling device 0000:03:00.0 (0100 -> 0102)
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 66
>PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100102, writing 100106)
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:0e:83:39:a6:80
>wlan0: RX authentication from 00:0e:83:39:a6:80 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:0e:83:39:a6:80
>wlan0: RX AssocResp from 00:0e:83:39:a6:80 (capab=0x431 status=0 aid=129)
>wlan0: associated
>wlan0: CTS protection enabled (BSSID=00:0e:83:39:a6:80)
>wlan0: switched to short barker preamble (BSSID=00:0e:83:39:a6:80)
>wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
>wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
>padlock: VIA PadLock not detected.
>wlan0: deauthenticate(reason=3)
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>]0;root@lc4eb2774624416:/etc/NetworkManager/ibm-test[root@lc4eb2774624416 ibm-test]# dmesg kill %1wpa_supplicant -Dwext -iwlan0 -cleap.conf -dd
>Initializing interface 'wlan0' conf 'leap.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
>Configuration file 'leap.conf' -> '/etc/NetworkManager/ibm-test/leap.conf'
>Reading configuration file '/etc/NetworkManager/ibm-test/leap.conf'
>ctrl_interface='/var/run/wpa_supplicant'
>ap_scan=1
>Line: 3 - start of a new network block
>scan_ssid=1 (0x1)
>ssid - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>key_mgmt: 0x1
>eap methods - hexdump(len=16): 00 00 00 00 11 00 00 00 00 00 00 00 00 00 00 00
>identity - hexdump_ascii(len=27):
>     67 72 61 6e 74 5f 77 69 6c 6c 69 61 6d 73 6f 6e   grant_williamson
>     40 6e 6c 2e 69 62 6d 2e 63 6f 6d                  @nl.ibm.com     
>password - hexdump_ascii(len=14):
>     ** ** ** ** ** ** ** ** ** ** ** ** ** **         ***************  
>Priority group 0
>   id=0 ssid='IBM'
>Initializing interface (2) 'wlan0'
>Interface wlan0 set UP - waiting a second for the driver to complete initialization
>SIOCGIWRANGE: WE(compiled)=20 WE(source)=21 enc_capa=0xf
>  capabilities: key_mgmt 0xf enc 0xf
>WEXT: Operstate: linkmode=1, operstate=5
>Own MAC address: 00:1f:3b:39:50:17
>wpa_driver_wext_set_wpa
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_countermeasures
>ioctl[SIOCSIWAUTH]: Operation not supported
>WEXT auth param 4 value 0x0 - wpa_driver_wext_set_drop_unencrypted
>RSN: flushing PMKID list in the driver
>Setting scan request: 0 sec 100000 usec
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: KEY_RX entering state NO_KEY_RECEIVE
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>Added interface wlan0
>Ignore event for foreign ifindex 3
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b06 len=8
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Trying to get current scan results first without requesting a new scan to speed up initial association
>ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
>Failed to get scan results
>Failed to get scan results - try scanning again
>Setting scan request: 0 sec 0 usec
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 5 seconds
>EAPOL: disable timer tick
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b19 len=8
>Scan results did not fit - trying larger buffer (8192 bytes)
>Received 4301 bytes of scan results (18 BSSes)
>CTRL-EVENT-SCAN-RESULTS 
>Selecting BSS from priority group 0
>Try to find WPA-enabled AP
>0: 00:0e:83:39:a6:80 ssid='IBM' wpa_ie_len=24 rsn_ie_len=20 caps=0x11
>   selected based on RSN IE
>   selected WPA AP 00:0e:83:39:a6:80 ssid='IBM'
>Try to find non-WPA AP
>Trying to associate with 00:0e:83:39:a6:80 (SSID='IBM' freq=2412 MHz)
>Cancelling scan request
>WPA: clearing own WPA/RSN IE
>Automatic auth_alg selection: 0x1
>RSN: using IEEE 802.11i/D9.0
>WPA: Selected cipher suites: group 4 pairwise 16 key_mgmt 1 proto 2
>WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 05 01 00 00 50 f2 02 01 00 00 50 f2 01 28 00
>WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 05 01 00 00 0f ac 04 01 00 00 0f ac 01 28 00
>WPA: using GTK WEP104
>WPA: using PTK CCMP
>WPA: using KEY_MGMT 802.1X
>WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 05 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00
>No keys have been configured - skip key clearing
>wpa_driver_wext_set_drop_unencrypted
>State: SCANNING -> ASSOCIATING
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>wpa_driver_wext_associate
>Setting authentication timeout: 15 sec 0 usec
>EAPOL: External notification - portControl=Auto
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b06 len=8
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b04 len=12
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b1a len=12
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: ASSOCIATING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: enable timer tick
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RX EAPOL from 00:0e:83:39:a6:80
>RX EAPOL - hexdump(len=51): 01 00 00 2f 01 01 00 2f 01 00 6e 65 74 77 6f 72 6b 69 64 3d 49 42 4d 2c 6e 61 73 69 64 3d 72 63 78 2d 61 70 2d 30 34 74 2d 31 2c 70 6f 72 74 69 64 3d 30
>Setting authentication timeout: 70 sec 0 usec
>EAPOL: Received EAP-Packet frame
>EAPOL: SUPP_PAE entering state RESTART
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>EAPOL: SUPP_PAE entering state AUTHENTICATING
>EAPOL: SUPP_BE entering state REQUEST
>EAPOL: getSuppRsp
>EAP: EAP entering state RECEIVED
>EAP: Received EAP-Request id=1 method=1 vendor=0 vendorMethod=0
>EAP: EAP entering state IDENTITY
>CTRL-EVENT-EAP-STARTED EAP authentication started
>EAP: EAP-Request Identity data - hexdump_ascii(len=42):
>     00 6e 65 74 77 6f 72 6b 69 64 3d 49 42 4d 2c 6e   _networkid=IBM,n
>     61 73 69 64 3d 72 63 78 2d 61 70 2d 30 34 74 2d   asid=rcx-ap-04t-
>     31 2c 70 6f 72 74 69 64 3d 30                     1,portid=0      
>EAP: using real identity - hexdump_ascii(len=27):
>     67 72 61 6e 74 5f 77 69 6c 6c 69 61 6d 73 6f 6e   grant_williamson
>     40 6e 6c 2e 69 62 6d 2e 63 6f 6d                  @nl.ibm.com     
>EAP: EAP entering state SEND_RESPONSE
>EAP: EAP entering state IDLE
>EAPOL: SUPP_BE entering state RESPONSE
>EAPOL: txSuppRsp
>TX EAPOL: dst=00:0e:83:39:a6:80
>TX EAPOL - hexdump(len=36): 01 00 00 20 02 01 00 20 01 67 72 61 6e 74 5f 77 69 6c 6c 69 61 6d 73 6f 6e 40 6e 6c 2e 69 62 6d 2e 63 6f 6d
>EAPOL: SUPP_BE entering state RECEIVE
>EAPOL: startWhen --> 0
>RX ctrl_iface - hexdump_ascii(len=6):
>     53 54 41 54 55 53                                 STATUS          
>RX ctrl_iface - hexdump_ascii(len=6):
>     53 54 41 54 55 53                                 STATUS          
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>Added BSSID 00:0e:83:39:a6:80 into blacklist
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>EAPOL: authWhile --> 0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RX EAPOL from 00:0e:83:39:a6:80
>RX EAPOL - hexdump(len=51): 01 00 00 2f 01 01 00 2f 01 00 6e 65 74 77 6f 72 6b 69 64 3d 49 42 4d 2c 6e 61 73 69 64 3d 72 63 78 2d 61 70 2d 30 34 74 2d 31 2c 70 6f 72 74 69 64 3d 30
>Setting authentication timeout: 70 sec 0 usec
>EAPOL: Received EAP-Packet frame
>EAPOL: SUPP_PAE entering state RESTART
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>EAPOL: SUPP_PAE entering state AUTHENTICATING
>EAPOL: SUPP_BE entering state REQUEST
>EAPOL: getSuppRsp
>EAP: EAP entering state RECEIVED
>EAP: Received EAP-Request id=1 method=1 vendor=0 vendorMethod=0
>EAP: EAP entering state IDENTITY
>CTRL-EVENT-EAP-STARTED EAP authentication started
>EAP: EAP-Request Identity data - hexdump_ascii(len=42):
>     00 6e 65 74 77 6f 72 6b 69 64 3d 49 42 4d 2c 6e   _networkid=IBM,n
>     61 73 69 64 3d 72 63 78 2d 61 70 2d 30 34 74 2d   asid=rcx-ap-04t-
>     31 2c 70 6f 72 74 69 64 3d 30                     1,portid=0      
>EAP: using real identity - hexdump_ascii(len=27):
>     67 72 61 6e 74 5f 77 69 6c 6c 69 61 6d 73 6f 6e   grant_williamson
>     40 6e 6c 2e 69 62 6d 2e 63 6f 6d                  @nl.ibm.com     
>EAP: EAP entering state SEND_RESPONSE
>EAP: EAP entering state IDLE
>EAPOL: SUPP_BE entering state RESPONSE
>EAPOL: txSuppRsp
>TX EAPOL: dst=00:0e:83:39:a6:80
>TX EAPOL - hexdump(len=36): 01 00 00 20 02 01 00 20 01 67 72 61 6e 74 5f 77 69 6c 6c 69 61 6d 73 6f 6e 40 6e 6c 2e 69 62 6d 2e 63 6f 6d
>EAPOL: SUPP_BE entering state RECEIVE
>EAPOL: startWhen --> 0
>EAPOL: authWhile --> 0
>EAPOL: SUPP_BE entering state TIMEOUT
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>Scan timeout - try to get results
>Received 0 bytes of scan results (0 BSSes)
>CTRL-EVENT-SCAN-RESULTS 
>Selecting BSS from priority group 0
>Try to find WPA-enabled AP
>Try to find non-WPA AP
>No APs found - clear blacklist and try again
>Removed BSSID 00:0e:83:39:a6:80 from blacklist (clear)
>Selecting BSS from priority group 0
>Try to find WPA-enabled AP
>Try to find non-WPA AP
>No suitable AP found.
>Setting scan request: 5 sec 0 usec
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>Added BSSID 00:0e:83:39:a6:80 into blacklist
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>State: DISCONNECTED -> SCANNING
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RX EAPOL from 00:0e:83:39:a6:80
>RX EAPOL - hexdump(len=51): 01 00 00 2f 01 01 00 2f 01 00 6e 65 74 77 6f 72 6b 69 64 3d 49 42 4d 2c 6e 61 73 69 64 3d 72 63 78 2d 61 70 2d 30 34 74 2d 31 2c 70 6f 72 74 69 64 3d 30
>Setting authentication timeout: 70 sec 0 usec
>EAPOL: Received EAP-Packet frame
>EAPOL: SUPP_PAE entering state RESTART
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>EAPOL: SUPP_PAE entering state AUTHENTICATING
>EAPOL: SUPP_BE entering state REQUEST
>EAPOL: getSuppRsp
>EAP: EAP entering state RECEIVED
>EAP: Received EAP-Request id=1 method=1 vendor=0 vendorMethod=0
>EAP: EAP entering state IDENTITY
>CTRL-EVENT-EAP-STARTED EAP authentication started
>EAP: EAP-Request Identity data - hexdump_ascii(len=42):
>     00 6e 65 74 77 6f 72 6b 69 64 3d 49 42 4d 2c 6e   _networkid=IBM,n
>     61 73 69 64 3d 72 63 78 2d 61 70 2d 30 34 74 2d   asid=rcx-ap-04t-
>     31 2c 70 6f 72 74 69 64 3d 30                     1,portid=0      
>EAP: using real identity - hexdump_ascii(len=27):
>     67 72 61 6e 74 5f 77 69 6c 6c 69 61 6d 73 6f 6e   grant_williamson
>     40 6e 6c 2e 69 62 6d 2e 63 6f 6d                  @nl.ibm.com     
>EAP: EAP entering state SEND_RESPONSE
>EAP: EAP entering state IDLE
>EAPOL: SUPP_BE entering state RESPONSE
>EAPOL: txSuppRsp
>TX EAPOL: dst=00:0e:83:39:a6:80
>TX EAPOL - hexdump(len=36): 01 00 00 20 02 01 00 20 01 67 72 61 6e 74 5f 77 69 6c 6c 69 61 6d 73 6f 6e 40 6e 6c 2e 69 62 6d 2e 63 6f 6d
>EAPOL: SUPP_BE entering state RECEIVE
>RX ctrl_iface - hexdump_ascii(len=6):
>     53 54 41 54 55 53                                 STATUS          
>RX ctrl_iface - hexdump_ascii(len=6):
>     53 54 41 54 55 53                                 STATUS          
>EAPOL: startWhen --> 0
>EAPOL: authWhile --> 0
>EAPOL: SUPP_BE entering state TIMEOUT
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>Scan timeout - try to get results
>Received 0 bytes of scan results (0 BSSes)
>CTRL-EVENT-SCAN-RESULTS 
>Selecting BSS from priority group 0
>Try to find WPA-enabled AP
>Try to find non-WPA AP
>No APs found - clear blacklist and try again
>Removed BSSID 00:0e:83:39:a6:80 from blacklist (clear)
>Selecting BSS from priority group 0
>Try to find WPA-enabled AP
>Try to find non-WPA AP
>No suitable AP found.
>Setting scan request: 5 sec 0 usec
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>Added BSSID 00:0e:83:39:a6:80 into blacklist
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>RX ctrl_iface - hexdump_ascii(len=6):
>     53 54 41 54 55 53                                 STATUS          
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 2
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 3
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 4
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 5
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 6
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 7
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 8
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 9
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 10
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 11
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 12
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 13
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 14
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 15
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>RX ctrl_iface - hexdump_ascii(len=6):
>     53 54 41 54 55 53                                 STATUS          
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 16
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 17
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 18
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 19
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 20
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 21
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 22
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 23
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>CTRL-EVENT-TERMINATING - signal 2 received
>Removing interface wlan0
>State: SCANNING -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>No keys have been configured - skip key clearing
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>wpa_driver_wext_set_wpa
>wpa_driver_wext_set_drop_unencrypted
>wpa_driver_wext_set_countermeasures
>ioctl[SIOCSIWAUTH]: Operation not supported
>WEXT auth param 4 value 0x0 - No keys have been configured - skip key clearing
>Removed BSSID 00:0e:83:39:a6:80 from blacklist (clear)
>Cancelling scan request
>Cancelling authentication timeout
>WEXT: Operstate: linkmode=0, operstate=6
>]0;root@lc4eb2774624416:/etc/NetworkManager/ibm-test[root@lc4eb2774624416 ibm-test]# cwpa_supplicant -Dwext -iwlan0 -cleap.conf -dd
>Initializing interface 'wlan0' conf 'leap.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
>Configuration file 'leap.conf' -> '/etc/NetworkManager/ibm-test/leap.conf'
>Reading configuration file '/etc/NetworkManager/ibm-test/leap.conf'
>ctrl_interface='/var/run/wpa_supplicant'
>ap_scan=1
>Line: 3 - start of a new network block
>scan_ssid=1 (0x1)
>ssid - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>key_mgmt: 0x1
>eap methods - hexdump(len=16): 00 00 00 00 11 00 00 00 00 00 00 00 00 00 00 00
>identity - hexdump_ascii(len=27):
>     67 72 61 6e 74 5f 77 69 6c 6c 69 61 6d 73 6f 6e   grant_williamson
>     40 6e 6c 2e 69 62 6d 2e 63 6f 6d                  @nl.ibm.com     
>password - hexdump_ascii(len=14):
>     ** ** ** ** ** ** ** ** ** ** ** ** ** **         ***************  
>Priority group 0
>   id=0 ssid='IBM'
>Initializing interface (2) 'wlan0'
>Interface wlan0 set UP - waiting a second for the driver to complete initialization
>SIOCGIWRANGE: WE(compiled)=20 WE(source)=21 enc_capa=0xf
>  capabilities: key_mgmt 0xf enc 0xf
>WEXT: Operstate: linkmode=1, operstate=5
>Own MAC address: 00:1f:3b:39:50:17
>wpa_driver_wext_set_wpa
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_countermeasures
>ioctl[SIOCSIWAUTH]: Operation not supported
>WEXT auth param 4 value 0x0 - wpa_driver_wext_set_drop_unencrypted
>RSN: flushing PMKID list in the driver
>Setting scan request: 0 sec 100000 usec
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: KEY_RX entering state NO_KEY_RECEIVE
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>Added interface wlan0
>Ignore event for foreign ifindex 3
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b06 len=8
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Trying to get current scan results first without requesting a new scan to speed up initial association
>ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
>Failed to get scan results
>Failed to get scan results - try scanning again
>Setting scan request: 0 sec 0 usec
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 5 seconds
>EAPOL: disable timer tick
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b19 len=8
>Scan results did not fit - trying larger buffer (8192 bytes)
>Received 4155 bytes of scan results (18 BSSes)
>CTRL-EVENT-SCAN-RESULTS 
>Selecting BSS from priority group 0
>Try to find WPA-enabled AP
>0: 00:0e:83:39:a6:80 ssid='IBM' wpa_ie_len=24 rsn_ie_len=20 caps=0x11
>   selected based on RSN IE
>   selected WPA AP 00:0e:83:39:a6:80 ssid='IBM'
>Try to find non-WPA AP
>Trying to associate with 00:0e:83:39:a6:80 (SSID='IBM' freq=2412 MHz)
>Cancelling scan request
>WPA: clearing own WPA/RSN IE
>Automatic auth_alg selection: 0x1
>RSN: using IEEE 802.11i/D9.0
>WPA: Selected cipher suites: group 4 pairwise 16 key_mgmt 1 proto 2
>WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 05 01 00 00 50 f2 02 01 00 00 50 f2 01 28 00
>WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 05 01 00 00 0f ac 04 01 00 00 0f ac 01 28 00
>WPA: using GTK WEP104
>WPA: using PTK CCMP
>WPA: using KEY_MGMT 802.1X
>WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 05 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00
>No keys have been configured - skip key clearing
>wpa_driver_wext_set_drop_unencrypted
>State: SCANNING -> ASSOCIATING
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>wpa_driver_wext_associate
>Setting authentication timeout: 15 sec 0 usec
>EAPOL: External notification - portControl=Auto
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b06 len=8
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b04 len=12
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b1a len=12
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: ASSOCIATING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: enable timer tick
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>Added BSSID 00:0e:83:39:a6:80 into blacklist
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 2
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 3
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 4
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 5
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 6
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 7
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 8
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 9
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 10
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>CTRL-EVENT-TERMINATING - signal 2 received
>Removing interface wlan0
>State: DISCONNECTED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>No keys have been configured - skip key clearing
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>wpa_driver_wext_set_wpa
>wpa_driver_wext_set_drop_unencrypted
>wpa_driver_wext_set_countermeasures
>ioctl[SIOCSIWAUTH]: Operation not supported
>WEXT auth param 4 value 0x0 - No keys have been configured - skip key clearing
>Removed BSSID 00:0e:83:39:a6:80 from blacklist (clear)
>Cancelling scan request
>Cancelling authentication timeout
>WEXT: Operstate: linkmode=0, operstate=6
>]0;root@lc4eb2774624416:/etc/NetworkManager/ibm-test
>[root@lc4eb2774624416 ibm-test]# 
>]0;root@lc4eb2774624416:/etc/NetworkManager/ibm-test
>[root@lc4eb2774624416 ibm-test]# 
>]0;root@lc4eb2774624416:/etc/NetworkManager/ibm-test[root@lc4eb2774624416 ibm-test]# wpa_supplicant -Dwext -iwlan0 -cleap.conf -dd
>Initializing interface 'wlan0' conf 'leap.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
>Configuration file 'leap.conf' -> '/etc/NetworkManager/ibm-test/leap.conf'
>Reading configuration file '/etc/NetworkManager/ibm-test/leap.conf'
>ctrl_interface='/var/run/wpa_supplicant'
>ap_scan=1
>Line: 3 - start of a new network block
>scan_ssid=1 (0x1)
>ssid - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>key_mgmt: 0x1
>eap methods - hexdump(len=16): 00 00 00 00 11 00 00 00 00 00 00 00 00 00 00 00
>identity - hexdump_ascii(len=27):
>     67 72 61 6e 74 5f 77 69 6c 6c 69 61 6d 73 6f 6e   grant_williamson
>     40 6e 6c 2e 69 62 6d 2e 63 6f 6d                  @nl.ibm.com     
>password - hexdump_ascii(len=14):
>     ** ** ** ** ** ** ** ** ** ** ** ** ** **         ***************  
>Priority group 0
>   id=0 ssid='IBM'
>Initializing interface (2) 'wlan0'
>Interface wlan0 set UP - waiting a second for the driver to complete initialization
>SIOCGIWRANGE: WE(compiled)=20 WE(source)=21 enc_capa=0xf
>  capabilities: key_mgmt 0xf enc 0xf
>WEXT: Operstate: linkmode=1, operstate=5
>Own MAC address: 00:1f:3b:39:50:17
>wpa_driver_wext_set_wpa
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_countermeasures
>ioctl[SIOCSIWAUTH]: Operation not supported
>WEXT auth param 4 value 0x0 - wpa_driver_wext_set_drop_unencrypted
>RSN: flushing PMKID list in the driver
>Setting scan request: 0 sec 100000 usec
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: KEY_RX entering state NO_KEY_RECEIVE
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>Added interface wlan0
>Ignore event for foreign ifindex 3
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b06 len=8
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Trying to get current scan results first without requesting a new scan to speed up initial association
>Received 0 bytes of scan results (0 BSSes)
>CTRL-EVENT-SCAN-RESULTS 
>Selecting BSS from priority group 0
>Try to find WPA-enabled AP
>Try to find non-WPA AP
>No suitable AP found.
>Setting scan request: 0 sec 0 usec
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 5 seconds
>EAPOL: disable timer tick
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b19 len=8
>Received 3914 bytes of scan results (17 BSSes)
>CTRL-EVENT-SCAN-RESULTS 
>Selecting BSS from priority group 0
>Try to find WPA-enabled AP
>0: 00:0e:83:39:a6:80 ssid='IBM' wpa_ie_len=24 rsn_ie_len=20 caps=0x11
>   selected based on RSN IE
>   selected WPA AP 00:0e:83:39:a6:80 ssid='IBM'
>Try to find non-WPA AP
>Trying to associate with 00:0e:83:39:a6:80 (SSID='IBM' freq=2412 MHz)
>Cancelling scan request
>WPA: clearing own WPA/RSN IE
>Automatic auth_alg selection: 0x1
>RSN: using IEEE 802.11i/D9.0
>WPA: Selected cipher suites: group 4 pairwise 16 key_mgmt 1 proto 2
>WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 05 01 00 00 50 f2 02 01 00 00 50 f2 01 28 00
>WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 05 01 00 00 0f ac 04 01 00 00 0f ac 01 28 00
>WPA: using GTK WEP104
>WPA: using PTK CCMP
>WPA: using KEY_MGMT 802.1X
>WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 05 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00
>No keys have been configured - skip key clearing
>wpa_driver_wext_set_drop_unencrypted
>State: SCANNING -> ASSOCIATING
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>wpa_driver_wext_associate
>Setting authentication timeout: 15 sec 0 usec
>EAPOL: External notification - portControl=Auto
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RSN: Ignored PMKID candidate without preauth flag
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b06 len=8
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b04 len=12
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b1a len=12
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: ASSOCIATING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: enable timer tick
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>Added BSSID 00:0e:83:39:a6:80 into blacklist
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 2
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 3
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 4
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 5
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 6
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 7
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 8
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 9
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 10
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8c02 len=104
>WEXT: Custom wireless event: 'ASSOCRESPIE=010882848b960c12182432043048606cdd180050f2020101820003a4000027a4000042435e0062322f00'
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:0e:83:39:a6:80
>State: SCANNING -> ASSOCIATED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>Associated to a new BSS: BSSID=00:0e:83:39:a6:80
>No keys have been configured - skip key clearing
>Associated with 00:0e:83:39:a6:80
>WPA: Association event - clear replay counter
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - portEnabled=1
>EAPOL: SUPP_PAE entering state CONNECTING
>EAPOL: SUPP_BE entering state IDLE
>EAP: EAP entering state INITIALIZE
>EAP: EAP entering state IDLE
>Setting authentication timeout: 10 sec 0 usec
>Cancelling scan request
>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b15 len=20
>Wireless event: new AP: 00:00:00:00:00:00
>Setting scan request: 0 sec 100000 usec
>BSSID 00:0e:83:39:a6:80 blacklist count incremented to 11
>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>State: ASSOCIATED -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portValid=0
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=3):
>     49 42 4d                                          IBM             
>Scan requested (ret=0) - scan timeout 30 seconds
>CTRL-EVENT-TERMINATING - signal 2 received
>Removing interface wlan0
>State: SCANNING -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>No keys have been configured - skip key clearing
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>wpa_driver_wext_set_wpa
>wpa_driver_wext_set_drop_unencrypted
>wpa_driver_wext_set_countermeasures
>ioctl[SIOCSIWAUTH]: Operation not supported
>WEXT auth param 4 value 0x0 - No keys have been configured - skip key clearing
>Removed BSSID 00:0e:83:39:a6:80 from blacklist (clear)
>Cancelling scan request
>Cancelling authentication timeout
>WEXT: Operstate: linkmode=0, operstate=6
>]0;root@lc4eb2774624416:/etc/NetworkManager/ibm-test[root@lc4eb2774624416 ibm-test]# 
>]0;root@lc4eb2774624416:/etc/NetworkManager/ibm-test[root@lc4eb2774624416 ibm-test]# 
>Script done on Tue 27 May 2008 01:23:26 PM CEST

Actions: View

Attachments on bug 431894: 294236 | 294237 | 294238 | 294356 | 306772 | 308289