Attachment 306805 Details for Bug 448574 – The "dmesg" output showing the BUG() and resulting stack trace

The "dmesg" output showing the BUG() and resulting stack trace

boot.msg (text/plain), 55.61 KB, created by IBM Bug Proxy on 2008-05-27 17:41:02 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: IBM Bug Proxy

Created: 2008-05-27 17:41:02 UTC

Size: 55.61 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.4-32ibmrt2.2debug (root@ltcrt18.austin.ibm.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP PREEMPT RT Wed Apr 16 00:47:35 EDT 2008
>Command line: ro root=LABEL=/ rhgb quiet crashkernel=256M@16M
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009c800 (usable)
> BIOS-e820: 000000000009c800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cffa3a00 (usable)
> BIOS-e820: 00000000cffa3a00 - 00000000cffa7400 (ACPI data)
> BIOS-e820: 00000000cffa7400 - 00000000d0000000 (reserved)
> BIOS-e820: 00000000f4000000 - 00000000fc000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
>Entering add_active_range(0, 0, 156) 0 entries of 3200 used
>Entering add_active_range(0, 256, 851875) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 2293760) 2 entries of 3200 used
>end_pfn_map = 2293760
>DMI 2.4 present.
>ACPI: RSDP 000FDFE0, 0014 (r0 IBM   )
>ACPI: RSDT CFFA7380, 0030 (r1 IBM    SERLEWIS     1000 IBM  45444F43)
>ACPI: FACP CFFA72C0, 0084 (r2 IBM    SERLEWIS     1000 IBM  45444F43)
>ACPI: DSDT CFFA3A00, 35FC (r1 IBM    SERLEWIS     1000 INTL 20060912)
>ACPI: FACS CFFA7080, 0040
>ACPI: APIC CFFA7200, 0090 (r1 IBM    SERLEWIS     1000 IBM  45444F43)
>ACPI: SRAT CFFA70C0, 0110 (r1 AMD    HAMMER          1 AMD         1)
>SRAT: PXM 0 -> APIC 0 -> Node 0
>SRAT: PXM 0 -> APIC 1 -> Node 0
>SRAT: PXM 1 -> APIC 2 -> Node 1
>SRAT: PXM 1 -> APIC 3 -> Node 1
>SRAT: Node 0 PXM 0 0-a0000
>Entering add_active_range(0, 0, 156) 0 entries of 3200 used
>SRAT: Node 0 PXM 0 0-d0000000
>Entering add_active_range(0, 0, 156) 1 entries of 3200 used
>Entering add_active_range(0, 256, 851875) 1 entries of 3200 used
>SRAT: Node 0 PXM 0 0-130000000
>Entering add_active_range(0, 0, 156) 2 entries of 3200 used
>Entering add_active_range(0, 256, 851875) 2 entries of 3200 used
>Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
>SRAT: Node 1 PXM 1 130000000-230000000
>Entering add_active_range(1, 1245184, 2293760) 3 entries of 3200 used
>NUMA: Using 28 for the hash shift.
>Bootmem setup node 0 0000000000000000-0000000130000000
>Bootmem setup node 1 0000000130000000-0000000230000000
>Reserving 256MB of memory at 16MB for crashkernel (System RAM: 8960MB)
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810011200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810011400000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810011600000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810011800000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810011c00000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810011e00000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810012000000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810012400000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810012600000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810012800000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810012a00000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810012e00000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810013000000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810013200000 on node 0
> [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810013600000 on node 0
> [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810013800000 on node 0
> [ffffe20002000000-ffffe200021fffff] PMD ->ffff810013a00000 on node 0
> [ffffe20002200000-ffffe200023fffff] PMD ->ffff810013c00000 on node 0
> [ffffe20002400000-ffffe200025fffff] PMD ->ffff810014000000 on node 0
> [ffffe20002600000-ffffe200027fffff] PMD ->ffff810014200000 on node 0
> [ffffe20002800000-ffffe200029fffff] PMD ->ffff810014400000 on node 0
> [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810014800000 on node 0
> [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810014a00000 on node 0
> [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810014c00000 on node 0
> [ffffe20003000000-ffffe200031fffff] PMD ->ffff810014e00000 on node 0
> [ffffe20003200000-ffffe200033fffff] PMD ->ffff810015200000 on node 0
> [ffffe20003400000-ffffe200035fffff] PMD ->ffff810015400000 on node 0
> [ffffe20003600000-ffffe200037fffff] PMD ->ffff810015600000 on node 0
> [ffffe20003800000-ffffe200039fffff] PMD ->ffff810015a00000 on node 0
> [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810015c00000 on node 0
> [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810015e00000 on node 0
> [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810016000000 on node 0
> [ffffe20004000000-ffffe200041fffff] PMD ->ffff810016400000 on node 0
> [ffffe20004200000-ffffe200043fffff] PMD ->ffff810016600000 on node 0
> [ffffe20004400000-ffffe200045fffff] PMD ->ffff810016800000 on node 0
> [ffffe20004600000-ffffe200047fffff] PMD ->ffff810016c00000 on node 0
> [ffffe20004800000-ffffe200049fffff] PMD ->ffff810016e00000 on node 0
> [ffffe20004a00000-ffffe20004bfffff] PMD ->ffff810017000000 on node 0
> [ffffe20004c00000-ffffe20004dfffff] PMD ->ffff810017200000 on node 0
> [ffffe20004e00000-ffffe20004ffffff] PMD ->ffff810017600000 on node 0
> [ffffe20005000000-ffffe200051fffff] PMD ->ffff810017800000 on node 0
> [ffffe20005200000-ffffe200053fffff] PMD ->ffff810017a00000 on node 0
> [ffffe20005400000-ffffe200055fffff] PMD ->ffff810017e00000 on node 0
> [ffffe20005600000-ffffe200057fffff] PMD ->ffff810018000000 on node 0
> [ffffe20005800000-ffffe200059fffff] PMD ->ffff810018200000 on node 0
> [ffffe20005a00000-ffffe20005bfffff] PMD ->ffff810018400000 on node 0
> [ffffe20005c00000-ffffe20005dfffff] PMD ->ffff810018800000 on node 0
> [ffffe20005e00000-ffffe20005ffffff] PMD ->ffff810018a00000 on node 0
> [ffffe20006000000-ffffe200061fffff] PMD ->ffff810018c00000 on node 0
> [ffffe20006200000-ffffe200063fffff] PMD ->ffff810019000000 on node 0
> [ffffe20006400000-ffffe200065fffff] PMD ->ffff810019200000 on node 0
> [ffffe20006600000-ffffe200067fffff] PMD ->ffff810019400000 on node 0
> [ffffe20006800000-ffffe200069fffff] PMD ->ffff810019600000 on node 0
> [ffffe20006a00000-ffffe20006bfffff] PMD ->ffff810019a00000 on node 0
> [ffffe20006c00000-ffffe20006dfffff] PMD ->ffff810019c00000 on node 0
> [ffffe20006e00000-ffffe20006ffffff] PMD ->ffff810019e00000 on node 0
> [ffffe20007000000-ffffe200071fffff] PMD ->ffff81001a200000 on node 0
> [ffffe20007200000-ffffe200073fffff] PMD ->ffff81001a400000 on node 0
> [ffffe20007400000-ffffe200075fffff] PMD ->ffff81001a600000 on node 0
> [ffffe20007600000-ffffe200077fffff] PMD ->ffff81001a800000 on node 0
> [ffffe20007800000-ffffe200079fffff] PMD ->ffff81001ac00000 on node 0
> [ffffe20007a00000-ffffe20007bfffff] PMD ->ffff81001ae00000 on node 0
> [ffffe20007c00000-ffffe20007dfffff] PMD ->ffff81001b000000 on node 0
> [ffffe20007e00000-ffffe20007ffffff] PMD ->ffff81001b400000 on node 0
> [ffffe20008000000-ffffe200081fffff] PMD ->ffff81001b600000 on node 0
> [ffffe20008200000-ffffe200083fffff] PMD ->ffff81001b800000 on node 0
> [ffffe20008400000-ffffe200085fffff] PMD ->ffff81001ba00000 on node 0
> [ffffe20008600000-ffffe200087fffff] PMD ->ffff81001be00000 on node 0
> [ffffe20008800000-ffffe200089fffff] PMD ->ffff81001c000000 on node 0
> [ffffe20008a00000-ffffe20008bfffff] PMD ->ffff81001c200000 on node 0
> [ffffe20008c00000-ffffe20008dfffff] PMD ->ffff81001c600000 on node 0
> [ffffe20008e00000-ffffe20008ffffff] PMD ->ffff81001c800000 on node 0
> [ffffe20009000000-ffffe200091fffff] PMD ->ffff81001ca00000 on node 0
> [ffffe20009200000-ffffe200093fffff] PMD ->ffff81001cc00000 on node 0
> [ffffe20009400000-ffffe200095fffff] PMD ->ffff81001d000000 on node 0
> [ffffe20009600000-ffffe200097fffff] PMD ->ffff81001d200000 on node 0
> [ffffe20009800000-ffffe200099fffff] PMD ->ffff81001d400000 on node 0
> [ffffe20009a00000-ffffe20009bfffff] PMD ->ffff81001d800000 on node 0
> [ffffe20009c00000-ffffe20009dfffff] PMD ->ffff81001da00000 on node 0
> [ffffe20009e00000-ffffe20009ffffff] PMD ->ffff81001dc00000 on node 0
> [ffffe2000a000000-ffffe2000a1fffff] PMD ->ffff81001de00000 on node 0
> [ffffe2000a200000-ffffe2000a3fffff] PMD ->ffff81001e200000 on node 0
> [ffffe2000a400000-ffffe2000a5fffff] PMD ->ffff81001e400000 on node 0
> [ffffe2000a600000-ffffe2000a7fffff] PMD ->ffff81001e600000 on node 0
> [ffffe2000a800000-ffffe2000a9fffff] PMD ->ffff81001ea00000 on node 0
> [ffffe2000aa00000-ffffe2000abfffff] PMD ->ffff81001ec00000 on node 0
> [ffffe2000ac00000-ffffe2000adfffff] PMD ->ffff81001ee00000 on node 0
> [ffffe2000ae00000-ffffe2000affffff] PMD ->ffff81001f000000 on node 0
> [ffffe2000b000000-ffffe2000b1fffff] PMD ->ffff81001f400000 on node 0
> [ffffe2000b200000-ffffe2000b3fffff] PMD ->ffff81001f600000 on node 0
> [ffffe2000b400000-ffffe2000b5fffff] PMD ->ffff81001f800000 on node 0
> [ffffe2000e000000-ffffe2000e1fffff] PMD ->ffff81001fc00000 on node 0
> [ffffe2000e200000-ffffe2000e3fffff] PMD ->ffff81001fe00000 on node 0
> [ffffe2000e400000-ffffe2000e5fffff] PMD ->ffff810020000000 on node 0
> [ffffe2000e600000-ffffe2000e7fffff] PMD ->ffff810020200000 on node 0
> [ffffe2000e800000-ffffe2000e9fffff] PMD ->ffff810020600000 on node 0
> [ffffe2000ea00000-ffffe2000ebfffff] PMD ->ffff810020800000 on node 0
> [ffffe2000ec00000-ffffe2000edfffff] PMD ->ffff810020a00000 on node 0
> [ffffe2000ee00000-ffffe2000effffff] PMD ->ffff810020e00000 on node 0
> [ffffe2000f000000-ffffe2000f1fffff] PMD ->ffff810021000000 on node 0
> [ffffe2000f200000-ffffe2000f3fffff] PMD ->ffff810021200000 on node 0
> [ffffe2000f400000-ffffe2000f5fffff] PMD ->ffff810021400000 on node 0
> [ffffe2000f600000-ffffe2000f7fffff] PMD ->ffff810021800000 on node 0
> [ffffe2000f800000-ffffe2000f9fffff] PMD ->ffff810021a00000 on node 0
> [ffffe2000fa00000-ffffe2000fbfffff] PMD ->ffff810021c00000 on node 0
> [ffffe2000fc00000-ffffe2000fdfffff] PMD ->ffff810022000000 on node 0
> [ffffe2000fe00000-ffffe2000fffffff] PMD ->ffff810022200000 on node 0
> [ffffe20010000000-ffffe200101fffff] PMD ->ffff810022400000 on node 0
> [ffffe20010200000-ffffe200103fffff] PMD ->ffff810022600000 on node 0
> [ffffe20010400000-ffffe200105fffff] PMD ->ffff810022a00000 on node 0
> [ffffe20010600000-ffffe200107fffff] PMD ->ffff810022c00000 on node 0
> [ffffe20010800000-ffffe200109fffff] PMD ->ffff810022e00000 on node 0
> [ffffe20010a00000-ffffe20010bfffff] PMD ->ffff810130200000 on node 1
> [ffffe20010c00000-ffffe20010dfffff] PMD ->ffff810130400000 on node 1
> [ffffe20010e00000-ffffe20010ffffff] PMD ->ffff810130600000 on node 1
> [ffffe20011000000-ffffe200111fffff] PMD ->ffff810130800000 on node 1
> [ffffe20011200000-ffffe200113fffff] PMD ->ffff810130a00000 on node 1
> [ffffe20011400000-ffffe200115fffff] PMD ->ffff810130c00000 on node 1
> [ffffe20011600000-ffffe200117fffff] PMD ->ffff810130e00000 on node 1
> [ffffe20011800000-ffffe200119fffff] PMD ->ffff810131000000 on node 1
> [ffffe20011a00000-ffffe20011bfffff] PMD ->ffff810131200000 on node 1
> [ffffe20011c00000-ffffe20011dfffff] PMD ->ffff810131400000 on node 1
> [ffffe20011e00000-ffffe20011ffffff] PMD ->ffff810131600000 on node 1
> [ffffe20012000000-ffffe200121fffff] PMD ->ffff810131800000 on node 1
> [ffffe20012200000-ffffe200123fffff] PMD ->ffff810131a00000 on node 1
> [ffffe20012400000-ffffe200125fffff] PMD ->ffff810131c00000 on node 1
> [ffffe20012600000-ffffe200127fffff] PMD ->ffff810131e00000 on node 1
> [ffffe20012800000-ffffe200129fffff] PMD ->ffff810132000000 on node 1
> [ffffe20012a00000-ffffe20012bfffff] PMD ->ffff810132200000 on node 1
> [ffffe20012c00000-ffffe20012dfffff] PMD ->ffff810132400000 on node 1
> [ffffe20012e00000-ffffe20012ffffff] PMD ->ffff810132600000 on node 1
> [ffffe20013000000-ffffe200131fffff] PMD ->ffff810132800000 on node 1
> [ffffe20013200000-ffffe200133fffff] PMD ->ffff810132a00000 on node 1
> [ffffe20013400000-ffffe200135fffff] PMD ->ffff810132c00000 on node 1
> [ffffe20013600000-ffffe200137fffff] PMD ->ffff810132e00000 on node 1
> [ffffe20013800000-ffffe200139fffff] PMD ->ffff810133000000 on node 1
> [ffffe20013a00000-ffffe20013bfffff] PMD ->ffff810133200000 on node 1
> [ffffe20013c00000-ffffe20013dfffff] PMD ->ffff810133400000 on node 1
> [ffffe20013e00000-ffffe20013ffffff] PMD ->ffff810133600000 on node 1
> [ffffe20014000000-ffffe200141fffff] PMD ->ffff810133800000 on node 1
> [ffffe20014200000-ffffe200143fffff] PMD ->ffff810133a00000 on node 1
> [ffffe20014400000-ffffe200145fffff] PMD ->ffff810133c00000 on node 1
> [ffffe20014600000-ffffe200147fffff] PMD ->ffff810133e00000 on node 1
> [ffffe20014800000-ffffe200149fffff] PMD ->ffff810134000000 on node 1
> [ffffe20014a00000-ffffe20014bfffff] PMD ->ffff810134200000 on node 1
> [ffffe20014c00000-ffffe20014dfffff] PMD ->ffff810134400000 on node 1
> [ffffe20014e00000-ffffe20014ffffff] PMD ->ffff810134600000 on node 1
> [ffffe20015000000-ffffe200151fffff] PMD ->ffff810134800000 on node 1
> [ffffe20015200000-ffffe200153fffff] PMD ->ffff810134a00000 on node 1
> [ffffe20015400000-ffffe200155fffff] PMD ->ffff810134c00000 on node 1
> [ffffe20015600000-ffffe200157fffff] PMD ->ffff810134e00000 on node 1
> [ffffe20015800000-ffffe200159fffff] PMD ->ffff810135000000 on node 1
> [ffffe20015a00000-ffffe20015bfffff] PMD ->ffff810135200000 on node 1
> [ffffe20015c00000-ffffe20015dfffff] PMD ->ffff810135400000 on node 1
> [ffffe20015e00000-ffffe20015ffffff] PMD ->ffff810135600000 on node 1
> [ffffe20016000000-ffffe200161fffff] PMD ->ffff810135800000 on node 1
> [ffffe20016200000-ffffe200163fffff] PMD ->ffff810135a00000 on node 1
> [ffffe20016400000-ffffe200165fffff] PMD ->ffff810135c00000 on node 1
> [ffffe20016600000-ffffe200167fffff] PMD ->ffff810135e00000 on node 1
> [ffffe20016800000-ffffe200169fffff] PMD ->ffff810136000000 on node 1
> [ffffe20016a00000-ffffe20016bfffff] PMD ->ffff810136200000 on node 1
> [ffffe20016c00000-ffffe20016dfffff] PMD ->ffff810136400000 on node 1
> [ffffe20016e00000-ffffe20016ffffff] PMD ->ffff810136600000 on node 1
> [ffffe20017000000-ffffe200171fffff] PMD ->ffff810136800000 on node 1
> [ffffe20017200000-ffffe200173fffff] PMD ->ffff810136a00000 on node 1
> [ffffe20017400000-ffffe200175fffff] PMD ->ffff810136c00000 on node 1
> [ffffe20017600000-ffffe200177fffff] PMD ->ffff810136e00000 on node 1
> [ffffe20017800000-ffffe200179fffff] PMD ->ffff810137000000 on node 1
> [ffffe20017a00000-ffffe20017bfffff] PMD ->ffff810137200000 on node 1
> [ffffe20017c00000-ffffe20017dfffff] PMD ->ffff810137400000 on node 1
> [ffffe20017e00000-ffffe20017ffffff] PMD ->ffff810137600000 on node 1
> [ffffe20018000000-ffffe200181fffff] PMD ->ffff810137800000 on node 1
> [ffffe20018200000-ffffe200183fffff] PMD ->ffff810137a00000 on node 1
> [ffffe20018400000-ffffe200185fffff] PMD ->ffff810137c00000 on node 1
> [ffffe20018600000-ffffe200187fffff] PMD ->ffff810137e00000 on node 1
> [ffffe20018800000-ffffe200189fffff] PMD ->ffff810138000000 on node 1
> [ffffe20018a00000-ffffe20018bfffff] PMD ->ffff810138200000 on node 1
> [ffffe20018c00000-ffffe20018dfffff] PMD ->ffff810138400000 on node 1
> [ffffe20018e00000-ffffe20018ffffff] PMD ->ffff810138600000 on node 1
> [ffffe20019000000-ffffe200191fffff] PMD ->ffff810138800000 on node 1
> [ffffe20019200000-ffffe200193fffff] PMD ->ffff810138a00000 on node 1
> [ffffe20019400000-ffffe200195fffff] PMD ->ffff810138c00000 on node 1
> [ffffe20019600000-ffffe200197fffff] PMD ->ffff810138e00000 on node 1
> [ffffe20019800000-ffffe200199fffff] PMD ->ffff810139000000 on node 1
> [ffffe20019a00000-ffffe20019bfffff] PMD ->ffff810139200000 on node 1
> [ffffe20019c00000-ffffe20019dfffff] PMD ->ffff810139400000 on node 1
> [ffffe20019e00000-ffffe20019ffffff] PMD ->ffff810139600000 on node 1
> [ffffe2001a000000-ffffe2001a1fffff] PMD ->ffff810139800000 on node 1
> [ffffe2001a200000-ffffe2001a3fffff] PMD ->ffff810139a00000 on node 1
> [ffffe2001a400000-ffffe2001a5fffff] PMD ->ffff810139c00000 on node 1
> [ffffe2001a600000-ffffe2001a7fffff] PMD ->ffff810139e00000 on node 1
> [ffffe2001a800000-ffffe2001a9fffff] PMD ->ffff81013a000000 on node 1
> [ffffe2001aa00000-ffffe2001abfffff] PMD ->ffff81013a200000 on node 1
> [ffffe2001ac00000-ffffe2001adfffff] PMD ->ffff81013a400000 on node 1
> [ffffe2001ae00000-ffffe2001affffff] PMD ->ffff81013a600000 on node 1
> [ffffe2001b000000-ffffe2001b1fffff] PMD ->ffff81013a800000 on node 1
> [ffffe2001b200000-ffffe2001b3fffff] PMD ->ffff81013aa00000 on node 1
> [ffffe2001b400000-ffffe2001b5fffff] PMD ->ffff81013ac00000 on node 1
> [ffffe2001b600000-ffffe2001b7fffff] PMD ->ffff81013ae00000 on node 1
> [ffffe2001b800000-ffffe2001b9fffff] PMD ->ffff81013b000000 on node 1
> [ffffe2001ba00000-ffffe2001bbfffff] PMD ->ffff81013b200000 on node 1
> [ffffe2001bc00000-ffffe2001bdfffff] PMD ->ffff81013b400000 on node 1
> [ffffe2001be00000-ffffe2001bffffff] PMD ->ffff81013b600000 on node 1
> [ffffe2001c000000-ffffe2001c1fffff] PMD ->ffff81013b800000 on node 1
> [ffffe2001c200000-ffffe2001c3fffff] PMD ->ffff81013ba00000 on node 1
> [ffffe2001c400000-ffffe2001c5fffff] PMD ->ffff81013bc00000 on node 1
> [ffffe2001c600000-ffffe2001c7fffff] PMD ->ffff81013be00000 on node 1
> [ffffe2001c800000-ffffe2001c9fffff] PMD ->ffff81013c000000 on node 1
> [ffffe2001ca00000-ffffe2001cbfffff] PMD ->ffff81013c200000 on node 1
> [ffffe2001cc00000-ffffe2001cdfffff] PMD ->ffff81013c400000 on node 1
> [ffffe2001ce00000-ffffe2001cffffff] PMD ->ffff81013c600000 on node 1
> [ffffe2001d000000-ffffe2001d1fffff] PMD ->ffff81013c800000 on node 1
> [ffffe2001d200000-ffffe2001d3fffff] PMD ->ffff81013ca00000 on node 1
> [ffffe2001d400000-ffffe2001d5fffff] PMD ->ffff81013cc00000 on node 1
> [ffffe2001d600000-ffffe2001d7fffff] PMD ->ffff81013ce00000 on node 1
> [ffffe2001d800000-ffffe2001d9fffff] PMD ->ffff81013d000000 on node 1
> [ffffe2001da00000-ffffe2001dbfffff] PMD ->ffff81013d200000 on node 1
> [ffffe2001dc00000-ffffe2001ddfffff] PMD ->ffff81013d400000 on node 1
> [ffffe2001de00000-ffffe2001dffffff] PMD ->ffff81013d600000 on node 1
> [ffffe2001e000000-ffffe2001e1fffff] PMD ->ffff81013d800000 on node 1
> [ffffe2001e200000-ffffe2001e3fffff] PMD ->ffff81013da00000 on node 1
> [ffffe2001e400000-ffffe2001e5fffff] PMD ->ffff81013dc00000 on node 1
> [ffffe2001e600000-ffffe2001e7fffff] PMD ->ffff81013de00000 on node 1
> [ffffe2001e800000-ffffe2001e9fffff] PMD ->ffff81013e000000 on node 1
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  2293760
>Movable zone start PFN for each node
>early_node_map[4] active PFN ranges
>    0:        0 ->      156
>    0:      256 ->   851875
>    0:  1048576 ->  1245184
>    1:  1245184 ->  2293760
>On node 0 totalpages: 1048383
>  DMA zone: 224 pages used for memmap
>  DMA zone: 19 pages reserved
>  DMA zone: 3753 pages, LIFO batch:0
>  DMA32 zone: 57120 pages used for memmap
>  DMA32 zone: 790659 pages, LIFO batch:31
>  Normal zone: 10752 pages used for memmap
>  Normal zone: 185856 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>On node 1 totalpages: 1048576
>  DMA zone: 0 pages used for memmap
>  DMA32 zone: 0 pages used for memmap
>  Normal zone: 57344 pages used for memmap
>  Normal zone: 991232 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x488
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
>Processor #2
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>Processor #3
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 14, address 0xfec00000, GSI 0-15
>ACPI: IOAPIC (id[0x0d] address[0xfec02000] gsi_base[16])
>IOAPIC[1]: apic_id 13, address 0xfec02000, GSI 16-31
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009c000 - 000000000009d000
>swsusp: Registered nosave memory region: 000000000009d000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>swsusp: Registered nosave memory region: 00000000cffa3000 - 00000000cffa4000
>swsusp: Registered nosave memory region: 00000000cffa4000 - 00000000cffa7000
>swsusp: Registered nosave memory region: 00000000cffa7000 - 00000000cffa8000
>swsusp: Registered nosave memory region: 00000000cffa8000 - 00000000d0000000
>swsusp: Registered nosave memory region: 00000000d0000000 - 00000000f4000000
>swsusp: Registered nosave memory region: 00000000f4000000 - 00000000fc000000
>swsusp: Registered nosave memory region: 00000000fc000000 - 00000000fec00000
>swsusp: Registered nosave memory region: 00000000fec00000 - 0000000100000000
>Allocating PCI resources starting at d4000000 (gap: d0000000:24000000)
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 461984 bytes of per cpu data
>Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
>Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1971500
>Policy zone: Normal
>Kernel command line: ro root=LABEL=/ rhgb quiet crashkernel=256M@16M
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>Marking TSC unstable due to TSCs unsynchronized
>time.c: Detected 2600.084 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:      8
>... MAX_LOCK_DEPTH:             30
>... MAX_LOCKDEP_KEYS:         2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     16384
>... MAX_LOCKDEP_CHAINS:      32768
>... CHAINHASH_SIZE:          16384
> memory used by lock dependency info: 2672 kB
> per task-struct memory footprint: 2160 bytes
>Checking aperture...
>CPU 0: aperture @ f4000000 size 64 MB
>CPU 1: aperture @ f4000000 size 64 MB
>Memory: 7645512k/9175040k available (2900k kernel code, 742324k reserved, 1716k data, 808k init)
>Calibrating delay using timer specific routine.. 5204.48 BogoMIPS (lpj=2602242)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys debug
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 12500420
>Detected 12.500 MHz APIC timer.
>lockdep: not fixing up alternatives.
>Booting processor 1/4 APIC 0x2
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5200.11 BogoMIPS (lpj=2600058)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1/2 -> Node 1
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 0
>Dual-Core AMD Opteron(tm) Processor 2218 stepping 02
>lockdep: not fixing up alternatives.
>Booting processor 2/4 APIC 0x1
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 5200.06 BogoMIPS (lpj=2600032)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 2/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Dual-Core AMD Opteron(tm) Processor 2218 stepping 02
>lockdep: not fixing up alternatives.
>Booting processor 3/4 APIC 0x3
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 5200.08 BogoMIPS (lpj=2600042)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 3/3 -> Node 1
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 1
>Dual-Core AMD Opteron(tm) Processor 2218 stepping 02
>Brought up 4 CPUs
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000005
>  groups: 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000004
>  domain 1: span 00000000,00000000,00000000,00000000,00000000,00000000,00000000,0000000f
>   groups: 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000005 00000000,00000000,00000000,00000000,00000000,00000000,00000000,0000000a
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000000,00000000,00000000,00000000,0000000a
>  groups: 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008
>  domain 1: span 00000000,00000000,00000000,00000000,00000000,00000000,00000000,0000000f
>   groups: 00000000,00000000,00000000,00000000,00000000,00000000,00000000,0000000a 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000005
>CPU2 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000005
>  groups: 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000004 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000001
>  domain 1: span 00000000,00000000,00000000,00000000,00000000,00000000,00000000,0000000f
>   groups: 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000005 00000000,00000000,00000000,00000000,00000000,00000000,00000000,0000000a
>CPU3 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000000,00000000,00000000,00000000,0000000a
>  groups: 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000002
>  domain 1: span 00000000,00000000,00000000,00000000,00000000,00000000,00000000,0000000f
>   groups: 00000000,00000000,00000000,00000000,00000000,00000000,00000000,0000000a 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000005
>net_namespace: 184 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIA.PCIB._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIC._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIF._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIG._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
>ACPI: PCI Interrupt Link [LPAC] (IRQs *9)
>ACPI: PCI Interrupt Link [LPUS] (IRQs *10)
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LPID] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LPSA] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LPSM] (IRQs) *0, disabled.
>ACPI: PCI Interrupt Link [LP00] (IRQs *9)
>ACPI: PCI Interrupt Link [LP01] (IRQs *5)
>ACPI: PCI Interrupt Link [LP02] (IRQs *9)
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP03] (IRQs) *0, disabled.
>ACPI: PCI Interrupt Link [LP04] (IRQs *5)
>ACPI: PCI Interrupt Link [LP05] (IRQs *9)
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP06] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP07] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP08] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP09] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP0A] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP0B] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP0C] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP0D] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP0E] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP0F] (IRQs) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-DMA: Disabling AGP.
>PCI-DMA: aperture base @ f4000000 size 65536 KB
>PCI-DMA: using GART IOMMU.
>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>tracer: 256 pages allocated for 16384<6> entries of 64 bytes
>   actual entries 16384
>system 00:01: ioport range 0x510-0x517 has been reserved
>system 00:01: ioport range 0x504-0x507 has been reserved
>system 00:01: ioport range 0x500-0x503 has been reserved
>system 00:01: ioport range 0x520-0x53f has been reserved
>system 00:01: ioport range 0x540-0x547 has been reserved
>system 00:01: ioport range 0x460-0x461 has been reserved
>system 00:08: ioport range 0xca8-0xca8 has been reserved
>system 00:08: ioport range 0xcac-0xcac has been reserved
>system 00:09: ioport range 0x400-0x47f could not be reserved
>system 00:09: ioport range 0x480-0x4cf has been reserved
>system 00:09: ioport range 0x4d0-0x4d1 has been reserved
>system 00:09: ioport range 0x4d6-0x4e0 has been reserved
>system 00:09: ioport range 0x540-0x55f could not be reserved
>system 00:09: ioport range 0x600-0x600 has been reserved
>system 00:09: ioport range 0xc00-0xc01 has been reserved
>system 00:09: ioport range 0xc06-0xca6 has been reserved
>system 00:09: ioport range 0xcb0-0xcb0 has been reserved
>system 00:09: ioport range 0xcb4-0xcb4 has been reserved
>system 00:09: ioport range 0xcc0-0xcdf has been reserved
>system 00:09: iomem range 0xf4000000-0xfbffffff could not be reserved
>system 00:09: iomem range 0xfec00000-0xffffffff could not be reserved
>PCI: Bridge: 0000:01:0d.0
>  IO window: disabled.
>  MEM window: e2000000-e6ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: e2000000-e7ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:06.0
>  IO window: 4000-4fff
>  MEM window: df000000-e00fffff
>  PREFETCH window: d4000000-d40fffff
>PCI: Bridge: 0000:00:07.0
>  IO window: disabled.
>  MEM window: dd000000-ddffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:08.0
>  IO window: disabled.
>  MEM window: dc000000-dcffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:09.0
>  IO window: disabled.
>  MEM window: db000000-dbffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0a.0
>  IO window: disabled.
>  MEM window: da000000-daffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0b.0
>  IO window: disabled.
>  MEM window: d9000000-d9ffffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 11, 12582912 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2964k freed
>Initializing RT-Tester: OK
>audit: initializing netlink socket (disabled)
>audit(1208371599.117:1): initialized
>krcupreemptd setsched 0
>  prio = 98
>Testing tracer sched_switch: PASSED
>Testing tracer ftrace: PASSED
>Testing dynamic ftrace: PASSED
>Testing tracer irqsoff: <6>(         swapper-1    |#1): new 107 us maximum-latency critical section.
>PASSED
>Testing tracer preemptoff: <6>(         swapper-1    |#1): new 102 us maximum-latency critical section.
>PASSED
>Testing tracer preemptirqsoff: <6>(    kstopmachine-381  |#1): new 2 us maximum-latency critical section.
>(    kstopmachine-381  |#1): new 6 us maximum-latency critical section.
>( softirq-timer/0-6    |#0): new 12 us maximum-latency critical section.
>(    kstopmachine-392  |#2): new 6 us maximum-latency critical section.
>(         swapper-0    |#2): new 38 us maximum-latency critical section.
>(         swapper-0    |#1): new 38 us maximum-latency critical section.
>PASSED
>Testing tracer wakeup: <6>( softirq-timer/0-6    |#0): new 15 us maximum wakeup latency.
>( softirq-timer/3-45   |#3): new 26 us maximum wakeup latency.
>PASSED
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Found disabled HT MSI Mapping on 0000:00:01.0
>PCI: MSI quirk detected. MSI disabled on chipset 0000:00:01.0.
>Boot video device is 0000:00:05.0
>PCI: Found enabled HT MSI Mapping on 0000:00:08.0
>PCI: Found enabled HT MSI Mapping on 0000:00:09.0
>PCI: Found enabled HT MSI Mapping on 0000:00:0a.0
>PCI: Found enabled HT MSI Mapping on 0000:00:0b.0
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Processor [CPU2] (supports 8 throttling states)
>ACPI: Processor [CPU3] (supports 8 throttling states)
>ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 2 Dual-Core AMD Opteron(tm) Processor 2218 processors (4 cpu cores) (version 2.20.00)
>powernow-k8: MP systems not supported by PSB BIOS structure
>powernow-k8: MP systems not supported by PSB BIOS structure
>powernow-k8: MP systems not supported by PSB BIOS structure
>powernow-k8: MP systems not supported by PSB BIOS structure
>registered taskstats version 1
>*****************************************************************************
>*                                                                           *
>*  REMINDER, the following debugging options are turned on in your .config: *
>*                                                                           *
>*        CONFIG_DEBUG_RT_MUTEXES                                            *
>*        CONFIG_LOCKDEP                                                     *
>*                                                                           *
>*  they may increase runtime overhead and latencies.                        *
>*                                                                           *
>*****************************************************************************
>Freeing unused kernel memory: 808k freed
>Write protecting the kernel read-only data: 1300k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LPUS] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LPUS] -> GSI 10 (level, low) -> IRQ 10
>ohci_hcd 0000:00:03.0: OHCI Host Controller
>ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:03.0: irq 10, io mem 0xf3fff000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LPUS] -> GSI 10 (level, low) -> IRQ 10
>ohci_hcd 0000:00:03.1: OHCI Host Controller
>ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:03.1: irq 10, io mem 0xf3ffe000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:03.2[A] -> Link [LPUS] -> GSI 10 (level, low) -> IRQ 10
>ehci_hcd 0000:00:03.2: EHCI Host Controller
>ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:03.2: irq 10, io mem 0xf3ffd000
>ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 4 ports detected
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'mpp' needs updating - please use bus_type methods
>QLogic Fibre Channel HBA Driver
>IO-APIC: Detected an IO-APIC needing a special quirk. If you experience unusual interrupt problems, try booting with "ioapic_level_quirk=0", or "noapic", if that doesn't work either.
>ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 20 (level, low) -> IRQ 20
>qla2xxx 0000:03:05.0: Found an ISP2422, irq 20, iobase 0xffffc2000224a000
>qla2xxx 0000:03:05.0: Configuring PCI space...
>qla2xxx 0000:03:05.0: Configure NVRAM parameters...
>qla2xxx 0000:03:05.0: Verifying loaded RISC code...
>usb 3-4: new high speed USB device using ehci_hcd and address 2
>usb 3-4: configuration #1 chosen from 1 choice
>hub 3-4:1.0: USB hub found
>hub 3-4:1.0: 2 ports detected
>qla2xxx 0000:03:05.0: Allocated (64 KB) for EFT...
>qla2xxx 0000:03:05.0: Allocated (1413 KB) for firmware dump...
>scsi0 : qla2xxx
>qla2xxx 0000:03:05.0: LOOP UP detected (4 Gbps).
>qla2xxx 0000:03:05.0: 
> QLogic Fibre Channel HBA Driver: 8.02.00-k5
>  QLogic QMC2462S - IBM eServer BC 4Gb FC Expansion Card SFF
>  ISP2422: PCI-X Mode 1 (133 MHz) @ 0000:03:05.0 hdma+, host#=0, fw=4.00.27 [IP] 
>IO-APIC: Detected an IO-APIC needing a special quirk. If you experience unusual interrupt problems, try booting with "ioapic_level_quirk=0", or "noapic", if that doesn't work either.
>ACPI: PCI Interrupt 0000:03:05.1[B] -> GSI 21 (level, low) -> IRQ 21
>qla2xxx 0000:03:05.1: Found an ISP2422, irq 21, iobase 0xffffc200023b0000
>qla2xxx 0000:03:05.1: Configuring PCI space...
>qla2xxx 0000:03:05.1: Configure NVRAM parameters...
>scsi 0:0:0:0: Direct-Access     IBM      1814      FAStT  0916 PQ: 0 ANSI: 5
>qla2xxx 0000:03:05.1: Verifying loaded RISC code...
>scsi 0:0:0:1: Direct-Access     IBM      1814      FAStT  0916 PQ: 0 ANSI: 5
>scsi 0:0:0:2: Direct-Access     IBM      1814      FAStT  0916 PQ: 0 ANSI: 5
>scsi 0:0:0:3: Direct-Access     IBM      1814      FAStT  0916 PQ: 0 ANSI: 5
>scsi 0:0:0:4: Direct-Access     IBM      1814      FAStT  0916 PQ: 0 ANSI: 5
>scsi 0:0:0:5: Direct-Access     IBM      1814      FAStT  0916 PQ: 0 ANSI: 5
>scsi 0:0:0:6: Direct-Access     IBM      1814      FAStT  0916 PQ: 0 ANSI: 5
>scsi 0:0:0:8: Direct-Access     IBM      1814      FAStT  0916 PQ: 0 ANSI: 5
>scsi 0:0:0:100: Direct-Access     IBM      1814      FAStT  0916 PQ: 0 ANSI: 5
>qla2xxx 0000:03:05.1: Allocated (64 KB) for EFT...
>qla2xxx 0000:03:05.1: Allocated (1413 KB) for firmware dump...
>scsi1 : qla2xxx
>qla2xxx 0000:03:05.1: LOOP UP detected (4 Gbps).
>scsi 1:0:0:0: Direct-Access     IBM      1814      FAStT  0916 PQ: 0 ANSI: 5
>qla2xxx 0000:03:05.1: 
> QLogic Fibre Channel HBA Driver: 8.02.00-k5
>  QLogic QMC2462S - IBM eServer BC 4Gb FC Expansion Card SFF
>  ISP2422: PCI-X Mode 1 (133 MHz) @ 0000:03:05.1 hdma+, host#=1, fw=4.00.27 [IP] 
>scsi 1:0:0:1: Direct-Access     IBM      1814      FAStT  0916 PQ: 0 ANSI: 5
>scsi2 : mpp virtual bus adaptor :version:09.02.C5.13,timestamp:Tue Nov 13 13:39:16 CST 2007
>913 [RAIDarray.mpp]Waiting for 600 seconds to discover LUNS on Current Owning Path
>scsi 1:0:0:2: Direct-Access     IBM      1814      FAStT  0916 PQ: 0 ANSI: 5
>scsi 1:0:0:3: Direct-Access     IBM      1814      FAStT  0916 PQ: 0 ANSI: 5
>scsi 1:0:0:4: Direct-Access     IBM      1814      FAStT  0916 PQ: 0 ANSI: 5
>scsi 1:0:0:5: Direct-Access     IBM      1814      FAStT  0916 PQ: 0 ANSI: 5
>scsi 1:0:0:6: Direct-Access     IBM      1814      FAStT  0916 PQ: 0 ANSI: 5
>scsi 1:0:0:8: Direct-Access     IBM      1814      FAStT  0916 PQ: 0 ANSI: 5
>scsi 1:0:0:100: Direct-Access     IBM      1814      FAStT  0916 PQ: 0 ANSI: 5
>scsi 2:0:0:0: Direct-Access     IBM      VirtualDisk      0916 PQ: 0 ANSI: 5
>scsi(2:0:0:0): Enabled tagged queuing, queue depth 30.
>sd 2:0:0:0: [sda] 62914560 512-byte hardware sectors (32212 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 77 00 10 08
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
>sd 2:0:0:0: [sda] 62914560 512-byte hardware sectors (32212 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 77 00 10 08
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
> sda: sda1 sda2 sda3
>sd 2:0:0:0: [sda] Attached SCSI disk
>sd 2:0:0:0: Attached scsi generic sg0 type 0
>scsi 2:0:0:1: Direct-Access     IBM      VirtualDisk      0916 PQ: 0 ANSI: 5
>scsi(2:0:0:1): Enabled tagged queuing, queue depth 30.
>sd 2:0:0:1: [sdb] 20971520 512-byte hardware sectors (10737 MB)
>sd 2:0:0:1: [sdb] Write Protect is off
>sd 2:0:0:1: [sdb] Mode Sense: 77 00 10 08
>sd 2:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
>sd 2:0:0:1: [sdb] 20971520 512-byte hardware sectors (10737 MB)
>sd 2:0:0:1: [sdb] Write Protect is off
>sd 2:0:0:1: [sdb] Mode Sense: 77 00 10 08
>sd 2:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
> sdb: sdb1 sdb2
>sd 2:0:0:1: [sdb] Attached SCSI disk
>sd 2:0:0:1: Attached scsi generic sg1 type 0
>scsi 2:0:0:2: Direct-Access     IBM      VirtualDisk      0916 PQ: 0 ANSI: 5
>scsi(2:0:0:2): Enabled tagged queuing, queue depth 30.
>sd 2:0:0:2: [sdc] 20971520 512-byte hardware sectors (10737 MB)
>sd 2:0:0:2: [sdc] Write Protect is off
>sd 2:0:0:2: [sdc] Mode Sense: 77 00 10 08
>sd 2:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
>sd 2:0:0:2: [sdc] 20971520 512-byte hardware sectors (10737 MB)
>sd 2:0:0:2: [sdc] Write Protect is off
>sd 2:0:0:2: [sdc] Mode Sense: 77 00 10 08
>sd 2:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
> sdc: sdc1
>sd 2:0:0:2: [sdc] Attached SCSI disk
>sd 2:0:0:2: Attached scsi generic sg2 type 0
>scsi 2:0:0:3: Direct-Access     IBM      VirtualDisk      0916 PQ: 0 ANSI: 5
>scsi(2:0:0:3): Enabled tagged queuing, queue depth 30.
>sd 2:0:0:3: [sdd] 10485760 512-byte hardware sectors (5369 MB)
>sd 2:0:0:3: [sdd] Write Protect is off
>sd 2:0:0:3: [sdd] Mode Sense: 77 00 10 08
>sd 2:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
>sd 2:0:0:3: [sdd] 10485760 512-byte hardware sectors (5369 MB)
>sd 2:0:0:3: [sdd] Write Protect is off
>sd 2:0:0:3: [sdd] Mode Sense: 77 00 10 08
>sd 2:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
> sdd: sdd1
>sd 2:0:0:3: [sdd] Attached SCSI disk
>sd 2:0:0:3: Attached scsi generic sg3 type 0
>scsi 2:0:0:4: Direct-Access     IBM      VirtualDisk      0916 PQ: 0 ANSI: 5
>scsi(2:0:0:4): Enabled tagged queuing, queue depth 30.
>sd 2:0:0:4: [sde] 10485760 512-byte hardware sectors (5369 MB)
>sd 2:0:0:4: [sde] Write Protect is off
>sd 2:0:0:4: [sde] Mode Sense: 77 00 10 08
>sd 2:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
>sd 2:0:0:4: [sde] 10485760 512-byte hardware sectors (5369 MB)
>sd 2:0:0:4: [sde] Write Protect is off
>sd 2:0:0:4: [sde] Mode Sense: 77 00 10 08
>sd 2:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
> sde: sde1
>sd 2:0:0:4: [sde] Attached SCSI disk
>sd 2:0:0:4: Attached scsi generic sg4 type 0
>scsi 2:0:0:5: Direct-Access     IBM      VirtualDisk      0916 PQ: 0 ANSI: 5
>scsi(2:0:0:5): Enabled tagged queuing, queue depth 30.
>sd 2:0:0:5: [sdf] 10485760 512-byte hardware sectors (5369 MB)
>sd 2:0:0:5: [sdf] Write Protect is off
>sd 2:0:0:5: [sdf] Mode Sense: 77 00 10 08
>sd 2:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
>sd 2:0:0:5: [sdf] 10485760 512-byte hardware sectors (5369 MB)
>sd 2:0:0:5: [sdf] Write Protect is off
>sd 2:0:0:5: [sdf] Mode Sense: 77 00 10 08
>sd 2:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
> sdf: sdf1
>sd 2:0:0:5: [sdf] Attached SCSI disk
>sd 2:0:0:5: Attached scsi generic sg5 type 0
>scsi 2:0:0:6: Direct-Access     IBM      VirtualDisk      0916 PQ: 0 ANSI: 5
>scsi(2:0:0:6): Enabled tagged queuing, queue depth 30.
>sd 2:0:0:6: [sdg] 10485760 512-byte hardware sectors (5369 MB)
>sd 2:0:0:6: [sdg] Write Protect is off
>sd 2:0:0:6: [sdg] Mode Sense: 77 00 10 08
>sd 2:0:0:6: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA
>sd 2:0:0:6: [sdg] 10485760 512-byte hardware sectors (5369 MB)
>sd 2:0:0:6: [sdg] Write Protect is off
>sd 2:0:0:6: [sdg] Mode Sense: 77 00 10 08
>sd 2:0:0:6: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA
> sdg: sdg1
>sd 2:0:0:6: [sdg] Attached SCSI disk
>sd 2:0:0:6: Attached scsi generic sg6 type 0
>scsi 2:0:0:8: Direct-Access     IBM      VirtualDisk      0916 PQ: 0 ANSI: 5
>scsi(2:0:0:8): Enabled tagged queuing, queue depth 30.
>sd 2:0:0:8: [sdh] 20971520 512-byte hardware sectors (10737 MB)
>sd 2:0:0:8: [sdh] Write Protect is off
>sd 2:0:0:8: [sdh] Mode Sense: 77 00 10 08
>sd 2:0:0:8: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA
>sd 2:0:0:8: [sdh] 20971520 512-byte hardware sectors (10737 MB)
>sd 2:0:0:8: [sdh] Write Protect is off
>sd 2:0:0:8: [sdh] Mode Sense: 77 00 10 08
>sd 2:0:0:8: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA
> sdh: sdh1
>sd 2:0:0:8: [sdh] Attached SCSI disk
>sd 2:0:0:8: Attached scsi generic sg7 type 0
>scsi 2:0:0:100: Direct-Access     IBM      VirtualDisk      0916 PQ: 0 ANSI: 5
>scsi(2:0:0:100): Enabled tagged queuing, queue depth 30.
>sd 2:0:0:100: [sdi] 52428800 512-byte hardware sectors (26844 MB)
>sd 2:0:0:100: [sdi] Write Protect is off
>sd 2:0:0:100: [sdi] Mode Sense: 77 00 10 08
>sd 2:0:0:100: [sdi] Write cache: enabled, read cache: enabled, supports DPO and FUA
>sd 2:0:0:100: [sdi] 52428800 512-byte hardware sectors (26844 MB)
>sd 2:0:0:100: [sdi] Write Protect is off
>sd 2:0:0:100: [sdi] Mode Sense: 77 00 10 08
>sd 2:0:0:100: [sdi] Write cache: enabled, read cache: enabled, supports DPO and FUA
> sdi: unknown partition table
>sd 2:0:0:100: [sdi] Attached SCSI disk
>sd 2:0:0:100: Attached scsi generic sg8 type 0
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:8192 avtab hash slots allocated.Num of rules:57675
>SELinux:8192 avtab hash slots allocated.Num of rules:57675
>security:  3 users, 6 roles, 1658 types, 210 bools, 1 sens, 1024 cats
>security:  61 classes, 57675 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=deny
>audit(1208371635.301:2): policy loaded auid=4294967295
>Clocksource tsc unstable (delta = 4856917526 ns)
>Floppy drive(s): fd0 is 1.44M
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>floppy0: no floppy controllers found
>EDAC MC: Ver: 2.1.0 Apr 16 2008
>BUG: MAX_STACK_TRACE_ENTRIES too low!
>turning off the locking correctness validator.
>Pid: 900, comm: udevd Not tainted 2.6.24.4-32ibmrt2.2debug #1
>
>Call Trace:
> [<ffffffff8025f0c2>] save_trace+0x9c/0xa4
> [<ffffffff8025f151>] add_lock_to_list+0x87/0xb5
> [<ffffffff8026285a>] __lock_acquire+0xb17/0xd19
> [<ffffffff804d23c8>] kprobe_flush_task+0x29/0xae
> [<ffffffff80262aea>] lock_acquire+0x8e/0xb2
> [<ffffffff804d23c8>] kprobe_flush_task+0x29/0xae
> [<ffffffff804ce7bd>] __spin_lock_irqsave+0x45/0x78
> [<ffffffff804d23c8>] kprobe_flush_task+0x29/0xae
> [<ffffffff80239da5>] finish_task_switch+0x9f/0xc9
> [<ffffffff804cc26e>] thread_return+0x48/0xda
> [<ffffffff802617e0>] trace_hardirqs_on+0xd/0xf
> [<ffffffff804cdac6>] rt_spin_unlock+0x4d/0x52
> [<ffffffff8020ccc6>] retint_kernel+0x26/0x30
> [<ffffffff804cc719>] preempt_schedule_irq+0x40/0x76
> [<ffffffff804cc72c>] preempt_schedule_irq+0x53/0x76
> [<ffffffff8020ccc6>] retint_kernel+0x26/0x30
> [<ffffffff802617e0>] trace_hardirqs_on+0xd/0xf
> [<ffffffff804cec3b>] __spin_unlock_irqrestore+0x51/0x6e
> [<ffffffff804ccd90>] rt_spin_lock_slowunlock+0x4a/0x77
> [<ffffffff804cdac6>] rt_spin_unlock+0x4d/0x52
> [<ffffffff802a6a7c>] __pte_alloc+0xcf/0xe5
> [<ffffffff802a7f8f>] copy_page_range+0x31f/0x6f4
> [<ffffffff802617e0>] trace_hardirqs_on+0xd/0xf
> [<ffffffff8023e30f>] copy_process+0xe34/0x1711
> [<ffffffff8023ed16>] do_fork+0x7d/0x222
> [<ffffffff804ccd0c>] rt_mutex_unlock+0xe/0x10
> [<ffffffff8026972e>] rt_up_read+0x70/0x74
> [<ffffffff804d11ff>] do_page_fault+0x42c/0x7a4
> [<ffffffff8020c199>] sys_rt_sigreturn+0x356/0x38d
> [<ffffffff804cd471>] trace_hardirqs_on_thunk+0x3a/0x3f
> [<ffffffff804cd471>] trace_hardirqs_on_thunk+0x3a/0x3f
> [<ffffffff8020c41f>] system_call+0xef/0x15c
> [<ffffffff8020a652>] sys_clone+0x28/0x2a
> [<ffffffff8020c907>] ptregscall_common+0x67/0xb0
>
>INFO: lockdep is turned off.
>---------------------------
>| preempt count: 00000002 ]
>| 2-level deep critical section nesting:
>----------------------------------------
>.. [<ffffffff804cbaa9>] .... __schedule+0x3a/0x7b7
>.....[<ffffffff804cc72c>] ..   ( <= preempt_schedule_irq+0x53/0x76)
>.. [<ffffffff804ce7a0>] .... __spin_lock_irqsave+0x28/0x78
>.....[<ffffffff804d23c8>] ..   ( <= kprobe_flush_task+0x29/0xae)
>
>input: PC Speaker as /class/input/input0
>EDAC MC0: Giving out device to 'k8_edac' 'Athlon64/Opteron': DEV 0000:00:18.2
>EDAC PCI0: Giving out device to module 'k8_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
>EDAC MC1: Giving out device to 'k8_edac' 'Athlon64/Opteron': DEV 0000:00:19.2
>rtc_cmos: probe of 00:05 failed with error -16
>input: Power Button (FF) as /class/input/input1
>ACPI: Power Button (FF) [PWRF]
>Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.6.9 (December 8, 2007)
>IO-APIC: Detected an IO-APIC needing a special quirk. If you experience unusual interrupt problems, try booting with "ioapic_level_quirk=0", or "noapic", if that doesn't work either.
>ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 17 (level, low) -> IRQ 17
>eth0: Broadcom NetXtreme II BCM5706 1000Base-SX (A2) PCI-X 64-bit 133MHz found at mem e2000000, IRQ 17, node addr 00:14:5e:6d:22:54
>IO-APIC: Detected an IO-APIC needing a special quirk. If you experience unusual interrupt problems, try booting with "ioapic_level_quirk=0", or "noapic", if that doesn't work either.
>ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 18 (level, low) -> IRQ 18
>eth1: Broadcom NetXtreme II BCM5706 1000Base-SX (A2) PCI-X 64-bit 133MHz found at mem e4000000, IRQ 18, node addr 00:14:5e:b3:1f:18
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>No dock devices found.
>md: Autodetecting RAID arrays.
>md: Scanned 0 and added 0 devices.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 4305412k swap on /dev/sda3.  Priority:-1 extents:1 across:4305412k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.default.retrans_time; Use net.ipv6.neigh.default.retrans_time_ms instead.
>bnx2: eth0 NIC SerDes Link is Up, 1000 Mbps full duplex
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>audit(1208372068.627:3): audit_pid=3523 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>eth0: no IPv6 routers present
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>ipmi message handler version 39.1
>IPMI System Interface driver.
>ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
>ipmi: Found new BMC (man_id: 0x000002,  prod_id: 0x0010, dev_id: 0x20)
>IPMI kcs interface initialized
>ipmi device interface
>krcupreemptd new prio is 115??

Actions: View

Attachments on bug 448574: 306805 | 314559