Attachment 306876 Details for Bug 448195 – /var/log/messages after logging out of KDE and starting GMONE as root

/var/log/messages after logging out of KDE and starting GMONE as root

msgs_gnomeroot.txt (text/plain), 44.69 KB, created by Syam on 2008-05-28 02:21:46 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Syam

Created: 2008-05-28 02:21:46 UTC

Size: 44.69 KB

patch

obsolete

>May 27 20:30:39 zig kernel: imklog 3.14.1, log source = /proc/kmsg started.
>May 27 20:30:39 zig kernel: Inspecting /boot/System.map-2.6.25.3-18.fc9.i686
>May 27 20:30:39 zig kernel: Loaded 28116 symbols from /boot/System.map-2.6.25.3-18.fc9.i686.
>May 27 20:30:39 zig kernel: Symbols match kernel version 2.6.25.
>May 27 20:30:39 zig kernel: No module symbols loaded - kernel modules not enabled.
>May 27 20:30:39 zig kernel: Initializing cgroup subsys cpuset
>May 27 20:30:39 zig kernel: Initializing cgroup subsys cpu
>May 27 20:30:39 zig kernel: Linux version 2.6.25.3-18.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Tue May 13 05:38:53 EDT 2008
>May 27 20:30:39 zig kernel: BIOS-provided physical RAM map:
>May 27 20:30:39 zig kernel:  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
>May 27 20:30:39 zig kernel:  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
>May 27 20:30:39 zig kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>May 27 20:30:39 zig kernel:  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
>May 27 20:30:39 zig kernel:  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
>May 27 20:30:39 zig kernel:  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
>May 27 20:30:39 zig kernel:  BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
>May 27 20:30:39 zig kernel:  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>May 27 20:30:39 zig kernel: 127MB HIGHMEM available.
>May 27 20:30:39 zig kernel: 896MB LOWMEM available.
>May 27 20:30:39 zig kernel: Scan SMP from c0000000 for 1024 bytes.
>May 27 20:30:39 zig kernel: Scan SMP from c009fc00 for 1024 bytes.
>May 27 20:30:39 zig kernel: Scan SMP from c00f0000 for 65536 bytes.
>May 27 20:30:39 zig kernel: found SMP MP-table at [c00f5360] 000f5360
>May 27 20:30:39 zig kernel: Using x86 segment limits to approximate NX protection
>May 27 20:30:39 zig kernel: Zone PFN ranges:
>May 27 20:30:39 zig kernel:   DMA             0 ->     4096
>May 27 20:30:39 zig kernel:   Normal       4096 ->   229376
>May 27 20:30:39 zig kernel:   HighMem    229376 ->   262128
>May 27 20:30:39 zig kernel: Movable zone start PFN for each node
>May 27 20:30:39 zig kernel: early_node_map[1] active PFN ranges
>May 27 20:30:39 zig kernel:     0:        0 ->   262128
>May 27 20:30:39 zig kernel: DMI 2.3 present.
>May 27 20:30:39 zig kernel: Using APIC driver default
>May 27 20:30:39 zig kernel: ACPI: RSDP 000F6E80, 0014 (r0 Nvidia)
>May 27 20:30:39 zig kernel: ACPI: RSDT 3FFF3000, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD  1010101)
>May 27 20:30:39 zig kernel: ACPI: FACP 3FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD  1010101)
>May 27 20:30:39 zig kernel: ACPI: DSDT 3FFF30C0, 4C3F (r1 NVIDIA AWRDACPI     1000 MSFT  100000C)
>May 27 20:30:39 zig kernel: ACPI: FACS 3FFF0000, 0040
>May 27 20:30:39 zig kernel: ACPI: MCFG 3FFF7D80, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD  1010101)
>May 27 20:30:39 zig kernel: ACPI: APIC 3FFF7D00, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD  1010101)
>May 27 20:30:39 zig kernel: Nvidia board detected. Ignoring ACPI timer override.
>May 27 20:30:39 zig kernel: If you got timer trouble try acpi_use_timer_override
>May 27 20:30:39 zig kernel: ACPI: PM-Timer IO Port: 0x1008
>May 27 20:30:39 zig kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>May 27 20:30:39 zig kernel: Processor #0 15:15 APIC version 16
>May 27 20:30:39 zig kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>May 27 20:30:39 zig kernel: ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>May 27 20:30:39 zig kernel: ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>May 27 20:30:39 zig kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>May 27 20:30:39 zig kernel: IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>May 27 20:30:39 zig kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>May 27 20:30:39 zig kernel: ACPI: BIOS IRQ0 pin2 override ignored.
>May 27 20:30:39 zig kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>May 27 20:30:39 zig kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>May 27 20:30:39 zig kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>May 27 20:30:39 zig kernel: Enabling APIC mode:  Flat.  Using 1 I/O APICs
>May 27 20:30:39 zig kernel: Using ACPI (MADT) for SMP configuration information
>May 27 20:30:39 zig kernel: Allocating PCI resources starting at 50000000 (gap: 40000000:90000000)
>May 27 20:30:39 zig kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>May 27 20:30:39 zig kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>May 27 20:30:39 zig kernel: PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>May 27 20:30:39 zig kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260081
>May 27 20:30:39 zig kernel: Kernel command line: ro root=UUID=da5cdea1-ca57-49cd-ae4d-c790a434d93c rhgb quiet
>May 27 20:30:39 zig kernel: Enabling fast FPU save and restore... done.
>May 27 20:30:39 zig kernel: Enabling unmasked SIMD FPU exception support... done.
>May 27 20:30:39 zig kernel: Initializing CPU#0
>May 27 20:30:39 zig kernel: CPU 0 irqstacks, hard=c07b9000 soft=c0799000
>May 27 20:30:39 zig kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
>May 27 20:30:39 zig kernel: Detected 2010.299 MHz processor.
>May 27 20:30:39 zig kernel: Console: colour VGA+ 80x25
>May 27 20:30:39 zig kernel: console [tty0] enabled
>May 27 20:30:39 zig kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>May 27 20:30:39 zig kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>May 27 20:30:39 zig kernel: Memory: 1031460k/1048512k available (2237k kernel code, 16228k reserved, 1120k data, 284k init, 131008k highmem)
>May 27 20:30:39 zig kernel: virtual kernel memory layout:
>May 27 20:30:39 zig kernel:     fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>May 27 20:30:39 zig kernel:     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>May 27 20:30:39 zig kernel:     vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>May 27 20:30:39 zig kernel:     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>May 27 20:30:39 zig kernel:       .init : 0xc074f000 - 0xc0796000   ( 284 kB)
>May 27 20:30:39 zig kernel:       .data : 0xc062f555 - 0xc0747800   (1120 kB)
>May 27 20:30:39 zig kernel:       .text : 0xc0400000 - 0xc062f555   (2237 kB)
>May 27 20:30:39 zig kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
>May 27 20:30:39 zig kernel: SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>May 27 20:30:39 zig kernel: Calibrating delay using timer specific routine.. 4022.00 BogoMIPS (lpj=2011004)
>May 27 20:30:39 zig kernel: Security Framework initialized
>May 27 20:30:39 zig kernel: SELinux:  Initializing.
>May 27 20:30:39 zig kernel: selinux_register_security:  Registering secondary module capability
>May 27 20:30:39 zig kernel: Capability LSM initialized as secondary
>May 27 20:30:39 zig kernel: Mount-cache hash table entries: 512
>May 27 20:30:39 zig kernel: Initializing cgroup subsys ns
>May 27 20:30:39 zig kernel: Initializing cgroup subsys cpuacct
>May 27 20:30:39 zig kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>May 27 20:30:39 zig kernel: CPU: L2 Cache: 512K (64 bytes/line)
>May 27 20:30:39 zig kernel: Intel machine check architecture supported.
>May 27 20:30:39 zig kernel: Intel machine check reporting enabled on CPU#0.
>May 27 20:30:39 zig kernel: Compat vDSO mapped to ffffe000.
>May 27 20:30:39 zig kernel: Checking 'hlt' instruction... OK.
>May 27 20:30:39 zig kernel: SMP alternatives: switching to UP code
>May 27 20:30:39 zig kernel: Freeing SMP alternatives: 20k freed
>May 27 20:30:39 zig kernel: ACPI: Core revision 20070126
>May 27 20:30:39 zig kernel: CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 00
>May 27 20:30:39 zig kernel: Total of 1 processors activated (4022.00 BogoMIPS).
>May 27 20:30:39 zig kernel: ENABLING IO-APIC IRQs
>May 27 20:30:39 zig kernel: ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>May 27 20:30:39 zig kernel: Brought up 1 CPUs
>May 27 20:30:39 zig kernel: net_namespace: 548 bytes
>May 27 20:30:39 zig kernel: Booting paravirtualized kernel on bare hardware
>May 27 20:30:39 zig kernel: Time: 20:30:14  Date: 05/27/08
>May 27 20:30:39 zig kernel: NET: Registered protocol family 16
>May 27 20:30:39 zig kernel: No dock devices found.
>May 27 20:30:39 zig kernel: ACPI: bus type pci registered
>May 27 20:30:39 zig kernel: PCI: Using MMCONFIG for extended config space
>May 27 20:30:39 zig kernel: PCI: Using configuration type 1
>May 27 20:30:39 zig kernel: Setting up standard PCI resources
>May 27 20:30:39 zig kernel: ACPI: Interpreter enabled
>May 27 20:30:39 zig kernel: ACPI: (supports S0 S1 S4 S5)
>May 27 20:30:39 zig kernel: ACPI: Using IOAPIC for interrupt routing
>May 27 20:30:39 zig kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
>May 27 20:30:39 zig kernel: PCI: Transparent bridge - 0000:00:09.0
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>May 27 20:30:39 zig rsyslogd: [origin software="rsyslogd" swVersion="3.14.1" x-pid="1766" x-info="http://www.rsyslog.com"] restart
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
>May 27 20:30:39 zig kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
>May 27 20:30:39 zig kernel: pnp: PnP ACPI init
>May 27 20:30:39 zig kernel: ACPI: bus type pnp registered
>May 27 20:30:39 zig kernel: pnp: PnP ACPI: found 15 devices
>May 27 20:30:39 zig kernel: ACPI: ACPI bus type pnp unregistered
>May 27 20:30:39 zig kernel: usbcore: registered new interface driver usbfs
>May 27 20:30:39 zig kernel: usbcore: registered new interface driver hub
>May 27 20:30:39 zig kernel: usbcore: registered new device driver usb
>May 27 20:30:39 zig kernel: PCI: Using ACPI for IRQ routing
>May 27 20:30:39 zig kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>May 27 20:30:39 zig kernel: NetLabel: Initializing
>May 27 20:30:39 zig kernel: NetLabel:  domain hash size = 128
>May 27 20:30:39 zig kernel: NetLabel:  protocols = UNLABELED CIPSOv4
>May 27 20:30:39 zig kernel: NetLabel:  unlabeled traffic allowed by default
>May 27 20:30:39 zig kernel: ACPI: RTC can wake from S4
>May 27 20:30:39 zig kernel: system 00:01: ioport range 0x1000-0x107f has been reserved
>May 27 20:30:39 zig kernel: system 00:01: ioport range 0x1080-0x10ff has been reserved
>May 27 20:30:39 zig kernel: system 00:01: ioport range 0x1400-0x147f has been reserved
>May 27 20:30:39 zig kernel: system 00:01: ioport range 0x1480-0x14ff has been reserved
>May 27 20:30:39 zig kernel: system 00:01: ioport range 0x1800-0x187f has been reserved
>May 27 20:30:39 zig kernel: system 00:01: ioport range 0x1880-0x18ff has been reserved
>May 27 20:30:39 zig kernel: system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>May 27 20:30:39 zig kernel: system 00:02: ioport range 0x800-0x87f has been reserved
>May 27 20:30:39 zig kernel: system 00:02: ioport range 0x295-0x314 has been reserved
>May 27 20:30:39 zig kernel: system 00:02: ioport range 0x294-0x297 could not be reserved
>May 27 20:30:39 zig kernel: system 00:0d: iomem range 0xd0000000-0xdfffffff could not be reserved
>May 27 20:30:39 zig kernel: system 00:0e: iomem range 0xcec00-0xcffff has been reserved
>May 27 20:30:39 zig kernel: system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
>May 27 20:30:39 zig kernel: system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
>May 27 20:30:39 zig kernel: system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
>May 27 20:30:39 zig kernel: system 00:0e: iomem range 0x3fff0000-0x3fffffff could not be reserved
>May 27 20:30:39 zig kernel: system 00:0e: iomem range 0xffff0000-0xffffffff could not be reserved
>May 27 20:30:39 zig kernel: system 00:0e: iomem range 0x0-0x9ffff could not be reserved
>May 27 20:30:39 zig kernel: system 00:0e: iomem range 0x100000-0x3ffeffff could not be reserved
>May 27 20:30:39 zig kernel: system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved
>May 27 20:30:39 zig kernel: system 00:0e: iomem range 0xfee00000-0xfee00fff could not be reserved
>May 27 20:30:39 zig kernel: PCI: Bridge: 0000:00:09.0
>May 27 20:30:39 zig kernel:   IO window: disabled.
>May 27 20:30:39 zig kernel:   MEM window: 0xf5000000-0xf50fffff
>May 27 20:30:39 zig kernel:   PREFETCH window: disabled.
>May 27 20:30:39 zig kernel: PCI: Bridge: 0000:00:0c.0
>May 27 20:30:39 zig kernel:   IO window: 9000-9fff
>May 27 20:30:39 zig kernel:   MEM window: disabled.
>May 27 20:30:39 zig kernel:   PREFETCH window: disabled.
>May 27 20:30:39 zig kernel: PCI: Bridge: 0000:00:0d.0
>May 27 20:30:39 zig kernel:   IO window: 8000-8fff
>May 27 20:30:39 zig kernel:   MEM window: disabled.
>May 27 20:30:39 zig kernel:   PREFETCH window: disabled.
>May 27 20:30:39 zig kernel: PCI: Bridge: 0000:00:0e.0
>May 27 20:30:39 zig kernel:   IO window: disabled.
>May 27 20:30:39 zig kernel:   MEM window: 0xf0000000-0xf2ffffff
>May 27 20:30:39 zig kernel:   PREFETCH window: 0x00000000e0000000-0x00000000efffffff
>May 27 20:30:39 zig kernel: NET: Registered protocol family 2
>May 27 20:30:39 zig kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>May 27 20:30:39 zig kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>May 27 20:30:39 zig kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>May 27 20:30:39 zig kernel: TCP: Hash tables configured (established 131072 bind 65536)
>May 27 20:30:39 zig kernel: TCP reno registered
>May 27 20:30:39 zig kernel: checking if image is initramfs... it is
>May 27 20:30:39 zig kernel: Freeing initrd memory: 2652k freed
>May 27 20:30:39 zig kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>May 27 20:30:39 zig kernel: apm: overridden by ACPI.
>May 27 20:30:39 zig kernel: audit: initializing netlink socket (disabled)
>May 27 20:30:39 zig kernel: type=2000 audit(1211920214.396:1): initialized
>May 27 20:30:39 zig kernel: highmem bounce pool size: 64 pages
>May 27 20:30:39 zig kernel: Total HugeTLB memory allocated, 0
>May 27 20:30:39 zig kernel: VFS: Disk quotas dquot_6.5.1
>May 27 20:30:39 zig kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>May 27 20:30:39 zig kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>May 27 20:30:39 zig kernel: io scheduler noop registered
>May 27 20:30:39 zig kernel: io scheduler anticipatory registered
>May 27 20:30:39 zig kernel: io scheduler deadline registered
>May 27 20:30:39 zig kernel: io scheduler cfq registered (default)
>May 27 20:30:39 zig kernel: pci 0000:00:00.0: Enabling HT MSI Mapping
>May 27 20:30:39 zig kernel: pci 0000:00:0c.0: Enabling HT MSI Mapping
>May 27 20:30:39 zig kernel: pci 0000:00:0c.0: Found enabled HT MSI Mapping
>May 27 20:30:39 zig kernel: pci 0000:00:0c.0: Linking AER extended capability
>May 27 20:30:39 zig kernel: pci 0000:00:0d.0: Enabling HT MSI Mapping
>May 27 20:30:39 zig kernel: pci 0000:00:0d.0: Found enabled HT MSI Mapping
>May 27 20:30:39 zig kernel: pci 0000:00:0d.0: Linking AER extended capability
>May 27 20:30:39 zig kernel: pci 0000:00:0e.0: Enabling HT MSI Mapping
>May 27 20:30:39 zig kernel: pci 0000:00:0e.0: Found enabled HT MSI Mapping
>May 27 20:30:39 zig kernel: pci 0000:00:0e.0: Linking AER extended capability
>May 27 20:30:39 zig kernel: assign_interrupt_mode Found MSI capability
>May 27 20:30:39 zig kernel: assign_interrupt_mode Found MSI capability
>May 27 20:30:39 zig kernel: assign_interrupt_mode Found MSI capability
>May 27 20:30:39 zig kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>May 27 20:30:39 zig kernel: ACPI: ACPI0007:00 is registered as cooling_device0
>May 27 20:30:39 zig kernel: isapnp: Scanning for PnP cards...
>May 27 20:30:39 zig kernel: isapnp: No Plug & Play device found
>May 27 20:30:39 zig kernel: Non-volatile memory driver v1.2
>May 27 20:30:39 zig kernel: Linux agpgart interface v0.103
>May 27 20:30:39 zig kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>May 27 20:30:39 zig kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>May 27 20:30:39 zig kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>May 27 20:30:39 zig kernel: 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>May 27 20:30:39 zig kernel: brd: module loaded
>May 27 20:30:39 zig kernel: input: Macintosh mouse button emulation as /devices/virtual/input/input0
>May 27 20:30:39 zig kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>May 27 20:30:39 zig kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
>May 27 20:30:39 zig kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
>May 27 20:30:39 zig kernel: mice: PS/2 mouse device common for all mice
>May 27 20:30:39 zig kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>May 27 20:30:39 zig kernel: rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>May 27 20:30:39 zig kernel: rtc0: alarms up to one year, y3k
>May 27 20:30:39 zig kernel: cpuidle: using governor ladder
>May 27 20:30:39 zig kernel: cpuidle: using governor menu
>May 27 20:30:39 zig kernel: usbcore: registered new interface driver hiddev
>May 27 20:30:39 zig kernel: usbcore: registered new interface driver usbhid
>May 27 20:30:39 zig kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>May 27 20:30:39 zig kernel: TCP cubic registered
>May 27 20:30:39 zig kernel: Initializing XFRM netlink socket
>May 27 20:30:39 zig kernel: NET: Registered protocol family 1
>May 27 20:30:39 zig kernel: NET: Registered protocol family 17
>May 27 20:30:39 zig kernel: Using IPI No-Shortcut mode
>May 27 20:30:39 zig kernel: registered taskstats version 1
>May 27 20:30:39 zig kernel:   Magic number: 8:622:549
>May 27 20:30:39 zig kernel:   hash matches device PNP0C0F:00
>May 27 20:30:39 zig kernel: Freeing unused kernel memory: 284k freed
>May 27 20:30:39 zig kernel: Write protecting the kernel read-only data: 908k
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23
>May 27 20:30:39 zig kernel: ehci_hcd 0000:00:02.1: EHCI Host Controller
>May 27 20:30:39 zig kernel: ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
>May 27 20:30:39 zig kernel: ehci_hcd 0000:00:02.1: debug port 1
>May 27 20:30:39 zig kernel: ehci_hcd 0000:00:02.1: irq 23, io mem 0xfeb00000
>May 27 20:30:39 zig kernel: ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>May 27 20:30:39 zig kernel: usb usb1: configuration #1 chosen from 1 choice
>May 27 20:30:39 zig kernel: hub 1-0:1.0: USB hub found
>May 27 20:30:39 zig kernel: hub 1-0:1.0: 10 ports detected
>May 27 20:30:39 zig kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>May 27 20:30:39 zig kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>May 27 20:30:39 zig kernel: usb usb1: Product: EHCI Host Controller
>May 27 20:30:39 zig kernel: usb usb1: Manufacturer: Linux 2.6.25.3-18.fc9.i686 ehci_hcd
>May 27 20:30:39 zig kernel: usb usb1: SerialNumber: 0000:00:02.1
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22
>May 27 20:30:39 zig kernel: ohci_hcd 0000:00:02.0: OHCI Host Controller
>May 27 20:30:39 zig kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>May 27 20:30:39 zig kernel: ohci_hcd 0000:00:02.0: irq 22, io mem 0xf5101000
>May 27 20:30:39 zig kernel: usb usb2: configuration #1 chosen from 1 choice
>May 27 20:30:39 zig kernel: hub 2-0:1.0: USB hub found
>May 27 20:30:39 zig kernel: hub 2-0:1.0: 10 ports detected
>May 27 20:30:39 zig kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>May 27 20:30:39 zig kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>May 27 20:30:39 zig kernel: usb usb2: Product: OHCI Host Controller
>May 27 20:30:39 zig kernel: usb usb2: Manufacturer: Linux 2.6.25.3-18.fc9.i686 ohci_hcd
>May 27 20:30:39 zig kernel: usb usb2: SerialNumber: 0000:00:02.0
>May 27 20:30:39 zig kernel: USB Universal Host Controller Interface driver v3.0
>May 27 20:30:39 zig kernel: SCSI subsystem initialized
>May 27 20:30:39 zig kernel: Driver 'sd' needs updating - please use bus_type methods
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
>May 27 20:30:39 zig kernel: ACPI: PCI interrupt for device 0000:00:07.0 disabled
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
>May 27 20:30:39 zig kernel: ACPI: PCI interrupt for device 0000:00:08.0 disabled
>May 27 20:30:39 zig kernel: input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input2
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
>May 27 20:30:39 zig kernel: sata_nv 0000:00:07.0: Using ADMA mode
>May 27 20:30:39 zig kernel: scsi0 : sata_nv
>May 27 20:30:39 zig kernel: scsi1 : sata_nv
>May 27 20:30:39 zig kernel: ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd000 irq 21
>May 27 20:30:39 zig kernel: ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd008 irq 21
>May 27 20:30:39 zig kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>May 27 20:30:39 zig kernel: ata1.00: ATA-6: ST3120827AS, 3.42, max UDMA/133
>May 27 20:30:39 zig kernel: ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
>May 27 20:30:39 zig kernel: ata1.00: configured for UDMA/133
>May 27 20:30:39 zig kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>May 27 20:30:39 zig kernel: ata2.00: ATA-7: WDC WD1600AABS-00PRA0, 05.06H05, max UDMA/133
>May 27 20:30:39 zig kernel: ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
>May 27 20:30:39 zig kernel: ata2.00: configured for UDMA/133
>May 27 20:30:39 zig kernel: scsi 0:0:0:0: Direct-Access     ATA      ST3120827AS      3.42 PQ: 0 ANSI: 5
>May 27 20:30:39 zig kernel: ata1: DMA mask 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>May 27 20:30:39 zig kernel: sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>May 27 20:30:39 zig kernel: sd 0:0:0:0: [sda] Write Protect is off
>May 27 20:30:39 zig kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>May 27 20:30:39 zig kernel: sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>May 27 20:30:39 zig kernel: sd 0:0:0:0: [sda] Write Protect is off
>May 27 20:30:39 zig kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>May 27 20:30:39 zig kernel:  sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4
>May 27 20:30:39 zig kernel: sd 0:0:0:0: [sda] Attached SCSI disk
>May 27 20:30:39 zig kernel: scsi 1:0:0:0: Direct-Access     ATA      WDC WD1600AABS-0 05.0 PQ: 0 ANSI: 5
>May 27 20:30:39 zig kernel: ata2: DMA mask 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>May 27 20:30:39 zig kernel: sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
>May 27 20:30:39 zig kernel: sd 1:0:0:0: [sdb] Write Protect is off
>May 27 20:30:39 zig kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>May 27 20:30:39 zig kernel: sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
>May 27 20:30:39 zig kernel: sd 1:0:0:0: [sdb] Write Protect is off
>May 27 20:30:39 zig kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>May 27 20:30:39 zig kernel:  sdb: sdb1 sdb2 sdb3
>May 27 20:30:39 zig kernel: sd 1:0:0:0: [sdb] Attached SCSI disk
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
>May 27 20:30:39 zig kernel: sata_nv 0000:00:08.0: Using ADMA mode
>May 27 20:30:39 zig kernel: scsi2 : sata_nv
>May 27 20:30:39 zig kernel: scsi3 : sata_nv
>May 27 20:30:39 zig kernel: ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe400 irq 20
>May 27 20:30:39 zig kernel: ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe408 irq 20
>May 27 20:30:39 zig kernel: ata3: SATA link down (SStatus 0 SControl 300)
>May 27 20:30:39 zig kernel: ata4: SATA link down (SStatus 0 SControl 300)
>May 27 20:30:39 zig kernel: kjournald starting.  Commit interval 5 seconds
>May 27 20:30:39 zig kernel: EXT3-fs: mounted filesystem with ordered data mode.
>May 27 20:30:39 zig kernel: SELinux:  Disabled at runtime.
>May 27 20:30:39 zig kernel: type=1404 audit(1211920223.098:2): selinux=0 auid=4294967295 ses=4294967295
>May 27 20:30:39 zig kernel: Floppy drive(s): fd0 is 1.44M
>May 27 20:30:39 zig kernel: FDC 0 is a post-1991 82077
>May 27 20:30:39 zig kernel: input: PC Speaker as /devices/platform/pcspkr/input/input3
>May 27 20:30:39 zig kernel: parport_pc 00:0a: reported by Plug and Play ACPI
>May 27 20:30:39 zig kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>May 27 20:30:39 zig kernel: i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>May 27 20:30:39 zig kernel: i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
>May 27 20:30:39 zig kernel: scsi4 : pata_amd
>May 27 20:30:39 zig kernel: scsi5 : pata_amd
>May 27 20:30:39 zig kernel: ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>May 27 20:30:39 zig kernel: ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>May 27 20:30:39 zig kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
>May 27 20:30:39 zig kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
>May 27 20:30:39 zig kernel: input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>May 27 20:30:39 zig kernel: ACPI: Power Button (FF) [PWRF]
>May 27 20:30:39 zig kernel: input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
>May 27 20:30:39 zig kernel: ACPI: Power Button (CM) [PWRB]
>May 27 20:30:39 zig kernel: ata6.00: ATAPI: SONY    DVD RW DRU-810A, 1.0f, max UDMA/33
>May 27 20:30:39 zig kernel: ata6.00: configured for UDMA/33
>May 27 20:30:39 zig kernel: scsi 5:0:0:0: CD-ROM            SONY     DVD RW DRU-810A  1.0f PQ: 0 ANSI: 5
>May 27 20:30:39 zig kernel: scsi 5:0:0:0: Attached scsi generic sg2 type 5
>May 27 20:30:39 zig kernel: forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
>May 27 20:30:39 zig kernel: Linux video capture interface: v2.00
>May 27 20:30:39 zig kernel: saa7130/34: v4l2 driver version 0.2.14 loaded
>May 27 20:30:39 zig kernel: ppdev: user-space parallel port driver
>May 27 20:30:39 zig kernel: forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x3f1 @ 7, addr 00:0f:ea:ec:5a:e7
>May 27 20:30:39 zig kernel: forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 22
>May 27 20:30:39 zig kernel: Driver 'sr' needs updating - please use bus_type methods
>May 27 20:30:39 zig kernel: sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>May 27 20:30:39 zig kernel: Uniform CD-ROM driver Revision: 3.20
>May 27 20:30:39 zig kernel: intel8x0_measure_ac97_clock: measured 50024 usecs
>May 27 20:30:39 zig kernel: intel8x0: clocking to 46776
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
>May 27 20:30:39 zig kernel: ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
>May 27 20:30:39 zig kernel: saa7134[0]: found at 0000:01:08.0, rev: 1, irq: 16, latency: 32, mmio: 0xf5000000
>May 27 20:30:39 zig kernel: saa7134[0]: subsystem: 11bd:002b, board: Pinnacle PCTV Stereo (saa7134) [card=26,autodetected]
>May 27 20:30:39 zig kernel: saa7134[0]: board init: gpio is 6000
>May 27 20:30:39 zig kernel: saa7134[0]: i2c eeprom 00: bd 11 2b 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
>May 27 20:30:39 zig kernel: saa7134[0]: i2c eeprom 10: 00 00 19 0e ff 20 ff ff ff ff ff ff ff ff ff ff
>May 27 20:30:39 zig kernel: saa7134[0]: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 53 ff ff ff ff
>May 27 20:30:39 zig kernel: saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>May 27 20:30:39 zig kernel: saa7134[0]: i2c eeprom 40: ff 07 00 c0 86 ff 01 01 ff ff ff ff ff ff ff ff
>May 27 20:30:39 zig kernel: saa7134[0]: i2c eeprom 50: 0c 22 17 4d 03 08 cb d3 ff ff ff ff ff ff ff ff
>May 27 20:30:39 zig kernel: saa7134[0]: i2c eeprom 60: 03 03 19 71 fb 08 cb d3 ff ff ff ff ff ff ff ff
>May 27 20:30:39 zig kernel: saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff 74 48 ff ff ff ff ff ff
>May 27 20:30:39 zig kernel: saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>May 27 20:30:39 zig kernel: saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>May 27 20:30:39 zig kernel: saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>May 27 20:30:39 zig kernel: saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>May 27 20:30:39 zig kernel: saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>May 27 20:30:39 zig kernel: saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>May 27 20:30:39 zig kernel: saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>May 27 20:30:39 zig kernel: saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>May 27 20:30:39 zig kernel: tuner' 2-0043: chip found @ 0x86 (saa7134[0])
>May 27 20:30:39 zig kernel: tda9887 2-0043: tda988[5/6/7] found
>May 27 20:30:39 zig kernel: Chip ID is not zero. It is not a TEA5767
>May 27 20:30:39 zig kernel: tuner' 2-0060: chip found @ 0xc0 (saa7134[0])
>May 27 20:30:39 zig kernel: mt20xx 2-0060: microtune: companycode=3cbf part=42 rev=22
>May 27 20:30:39 zig kernel: mt20xx 2-0060: microtune MT2050 found, OK
>May 27 20:30:39 zig kernel: saa7134[0]: registered device video0 [v4l2]
>May 27 20:30:39 zig kernel: saa7134[0]: registered device vbi0
>May 27 20:30:39 zig kernel: device-mapper: uevent: version 1.0.3
>May 27 20:30:39 zig kernel: device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>May 27 20:30:39 zig kernel: device-mapper: multipath: version 1.0.5 loaded
>May 27 20:30:39 zig kernel: EXT3 FS on sda3, internal journal
>May 27 20:30:39 zig kernel: fuse init (API version 7.9)
>May 27 20:30:39 zig kernel: Adding 1052248k swap on /dev/sda4.  Priority:-1 extents:1 across:1052248k
>May 27 20:30:39 zig kernel: powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)
>May 27 20:30:39 zig kernel: powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x6
>May 27 20:30:39 zig kernel: powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x8
>May 27 20:30:39 zig kernel: powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
>May 27 20:30:39 zig kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
>May 27 20:30:39 zig kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>May 27 20:30:39 zig kernel: NET: Registered protocol family 10
>May 27 20:30:39 zig kernel: lo: Disabled Privacy Extensions
>May 27 20:30:39 zig kernel: Marking TSC unstable due to: cpufreq changes.
>May 27 20:30:39 zig kernel: Clocksource tsc unstable (delta = -249996829 ns)
>May 27 20:30:40 zig rpc.statd[1803]: Version 1.1.2 Starting
>May 27 20:30:40 zig sm-notify[1805]: sm-notify running as root. chown /var/lib/nfs/sm to choose different user
>May 27 20:30:40 zig Backgrounding to notify hosts...
>May 27 20:30:40 zig kernel: RPC: Registered udp transport module.
>May 27 20:30:40 zig kernel: RPC: Registered tcp transport module.
>May 27 20:30:41 zig acpid: starting up
>May 27 20:30:42 zig acpid: client connected from 1990[68:68]
>May 27 20:30:43 zig ntpd[2046]: ntpd 4.2.4p4@1.1520-o Mon Apr  7 17:39:41 UTC 2008 (1)
>May 27 20:30:43 zig ntpd[2047]: precision = 2.000 usec
>May 27 20:30:43 zig ntpd[2047]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
>May 27 20:30:43 zig ntpd[2047]: Listening on interface #1 wildcard, ::#123 Disabled
>May 27 20:30:43 zig ntpd[2047]: Listening on interface #2 lo, ::1#123 Enabled
>May 27 20:30:43 zig ntpd[2047]: Listening on interface #3 eth0, fe80::20f:eaff:feec:5ae7#123 Enabled
>May 27 20:30:43 zig ntpd[2047]: Listening on interface #4 lo, 127.0.0.1#123 Enabled
>May 27 20:30:43 zig ntpd[2047]: Listening on interface #5 eth0, 192.168.1.2#123 Enabled
>May 27 20:30:43 zig ntpd[2047]: kernel time sync status 0040
>May 27 20:30:44 zig ntpd[2047]: frequency initialized -42.097 PPM from /var/lib/ntp/drift
>May 27 20:30:44 zig gpm[2055]: *** info [startup.c(95)]: 
>May 27 20:30:44 zig gpm[2055]: Started gpm successfully. Entered daemon mode.
>May 27 20:31:43 zig acpid: client connected from 2340[0:0]
>May 27 20:31:46 zig gconfd (gdm-2482): starting (version 2.22.0), pid 2482 user 'gdm'
>May 27 20:31:46 zig gconfd (gdm-2482): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
>May 27 20:31:46 zig gconfd (gdm-2482): Resolved address "xml:readonly:/etc/gconf/gconf.xml.system" to a read-only configuration source at position 1
>May 27 20:31:46 zig gconfd (gdm-2482): Resolved address "xml:readonly:/var/lib/gdm/.gconf.mandatory" to a read-only configuration source at position 2
>May 27 20:31:46 zig gconfd (gdm-2482): Resolved address "xml:readwrite:/var/lib/gdm/.gconf" to a writable configuration source at position 3
>May 27 20:31:46 zig gconfd (gdm-2482): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 4
>May 27 20:31:50 zig pulseaudio[2542]: polkit.c: Cannot set UID on session object.
>May 27 20:31:50 zig pulseaudio[2542]: main.c: Called SUID root and real-time/high-priority scheduling was requested in the configuration. However, we lack the necessary priviliges:
>May 27 20:31:50 zig pulseaudio[2542]: main.c: We are not in group 'pulse-rt' and PolicyKit refuse to grant us priviliges. Dropping SUID again.
>May 27 20:31:50 zig pulseaudio[2542]: main.c: For enabling real-time scheduling please acquire the appropriate PolicyKit priviliges, or become a member of 'pulse-rt', or increase the RLIMIT_NICE/RLIMIT_RTPRIO resource limits for this user.
>May 27 20:31:50 zig pulseaudio[2542]: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
>May 27 20:31:50 zig pulseaudio[2542]: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
>May 27 20:31:50 zig pulseaudio[2542]: alsa-util.c: Device front:0 doesn't support 44100 Hz, changed to 48000 Hz.
>May 27 20:31:50 zig gconfd (gdm-2482): Error setting value for `/apps/gnome-screensaver/power_management_delay': Can't overwrite existing read-only value: Value for `/apps/gnome-screensaver/power_management_delay' set in a read-only source at the front of your configuration path
>May 27 20:31:50 zig gconfd (gdm-2482): Error setting value for `/apps/gnome-screensaver/power_management_delay': Can't overwrite existing read-only value: Value for `/apps/gnome-screensaver/power_management_delay' set in a read-only source at the front of your configuration path
>May 27 20:31:51 zig pulseaudio[2542]: alsa-util.c: Device front:0 doesn't support 44100 Hz, changed to 48000 Hz.
>May 27 20:32:52 zig acpid: client connected from 2340[0:0]
>May 27 20:32:56 zig gconfd (gdm-2482): Exiting
>May 27 20:32:56 zig gconfd (syamcr-2860): starting (version 2.22.0), pid 2860 user 'syamcr'
>May 27 20:32:56 zig gconfd (syamcr-2860): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
>May 27 20:32:56 zig gconfd (syamcr-2860): Resolved address "xml:readwrite:/home/syamcr/.gconf" to a writable configuration source at position 1
>May 27 20:32:56 zig gconfd (syamcr-2860): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
>May 27 20:33:17 zig gdm-session-worker[2535]: gethostby*.getanswer: asked for "", got "."
>May 27 20:33:26 zig pulseaudio[3211]: pid.c: Stale PID file, overwriting.
>May 27 20:33:26 zig pulseaudio[3211]: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
>May 27 20:33:26 zig pulseaudio[3211]: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
>May 27 20:33:26 zig pulseaudio[3211]: alsa-util.c: Device front:0 doesn't support 44100 Hz, changed to 48000 Hz.
>May 27 20:33:26 zig pulseaudio[3211]: alsa-util.c: Device front:0 doesn't support 44100 Hz, changed to 48000 Hz.
>May 27 20:33:39 zig pulseaudio[3211]: module-x11-xsmp.c: X11 session manager not running.
>May 27 20:33:39 zig pulseaudio[3211]: module.c: Failed to load  module "module-x11-xsmp" (argument: ""): initialization failed.
>May 27 20:35:04 zig ntpd[2047]: synchronized to 69.60.98.55, stratum 2
>May 27 20:35:04 zig ntpd[2047]: time reset +0.310325 s
>May 27 20:35:04 zig ntpd[2047]: kernel time sync status change 0001
>May 27 20:35:05 zig acpid: client connected from 2340[0:0]
>May 27 20:35:43 zig scim-bridge: Cleanup, done. Exitting...
>May 27 20:35:44 zig kernel: klauncher[3239]: segfault at 8048814 ip 00638da8 sp bfdaa420 error 7 in libX11.so.6.2.0[623000+fd000]
>May 27 20:35:44 zig scim-bridge: Cleanup, done. Exitting...
>May 27 20:35:46 zig acpid: client connected from 3546[0:0]
>May 27 20:35:47 zig gconfd (gdm-3641): starting (version 2.22.0), pid 3641 user 'gdm'
>May 27 20:35:47 zig gconfd (gdm-3641): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
>May 27 20:35:47 zig gconfd (gdm-3641): Resolved address "xml:readonly:/etc/gconf/gconf.xml.system" to a read-only configuration source at position 1
>May 27 20:35:47 zig gconfd (gdm-3641): Resolved address "xml:readonly:/var/lib/gdm/.gconf.mandatory" to a read-only configuration source at position 2
>May 27 20:35:47 zig gconfd (gdm-3641): Resolved address "xml:readwrite:/var/lib/gdm/.gconf" to a writable configuration source at position 3
>May 27 20:35:47 zig gconfd (gdm-3641): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 4
>May 27 20:35:47 zig pulseaudio[3700]: polkit.c: Cannot set UID on session object.
>May 27 20:35:47 zig pulseaudio[3700]: main.c: Called SUID root and real-time/high-priority scheduling was requested in the configuration. However, we lack the necessary priviliges:
>May 27 20:35:47 zig pulseaudio[3700]: main.c: We are not in group 'pulse-rt' and PolicyKit refuse to grant us priviliges. Dropping SUID again.
>May 27 20:35:47 zig pulseaudio[3700]: main.c: For enabling real-time scheduling please acquire the appropriate PolicyKit priviliges, or become a member of 'pulse-rt', or increase the RLIMIT_NICE/RLIMIT_RTPRIO resource limits for this user.
>May 27 20:35:47 zig pulseaudio[3700]: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
>May 27 20:35:47 zig pulseaudio[3700]: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
>May 27 20:35:48 zig pulseaudio[3700]: alsa-util.c: Error opening PCM device hw:0: No such file or directory
>May 27 20:35:48 zig pulseaudio[3700]: module.c: Failed to load  module "module-alsa-sink" (argument: "device_id=0 sink_name=alsa_output.pci_10de_59_sound_card_0_alsa_playback_0"): initialization failed.
>May 27 20:35:48 zig pulseaudio[3700]: alsa-util.c: Error opening PCM device hw:0: No such file or directory
>May 27 20:35:48 zig pulseaudio[3700]: module.c: Failed to load  module "module-alsa-source" (argument: "device_id=0 source_name=alsa_input.pci_10de_59_sound_card_0_alsa_capture_0"): initialization failed.
>May 27 20:35:48 zig gconfd (gdm-3641): Error setting value for `/apps/gnome-screensaver/power_management_delay': Can't overwrite existing read-only value: Value for `/apps/gnome-screensaver/power_management_delay' set in a read-only source at the front of your configuration path
>May 27 20:35:48 zig gconfd (gdm-3641): Error setting value for `/apps/gnome-screensaver/power_management_delay': Can't overwrite existing read-only value: Value for `/apps/gnome-screensaver/power_management_delay' set in a read-only source at the front of your configuration path
>May 27 20:35:48 zig pulseaudio[3700]: alsa-util.c: Device front:0 doesn't support 44100 Hz, changed to 48000 Hz.
>May 27 20:35:48 zig pulseaudio[3700]: alsa-util.c: Device front:0 doesn't support 44100 Hz, changed to 48000 Hz.
>May 27 20:35:57 zig gconfd (syamcr-2860): GConf server is not in use, shutting down.
>May 27 20:35:57 zig gconfd (syamcr-2860): Exiting
>May 27 20:37:28 zig gconfd (gdm-3641): Exiting
>May 27 20:37:28 zig gconfd (root-3812): starting (version 2.22.0), pid 3812 user 'root'
>May 27 20:37:28 zig gconfd (root-3812): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
>May 27 20:37:28 zig gconfd (root-3812): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1
>May 27 20:37:28 zig gconfd (root-3812): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
>May 27 20:37:49 zig gdm-session-worker[3686]: gethostby*.getanswer: asked for "", got "."
>May 27 20:37:58 zig pulseaudio[4210]: main.c: This program is not intended to be run as root (unless --system is specified).
>May 27 20:37:58 zig pulseaudio[4210]: alsa-util.c: Device front:0 doesn't support 44100 Hz, changed to 48000 Hz.
>May 27 20:37:58 zig pulseaudio[4210]: alsa-util.c: Device front:0 doesn't support 44100 Hz, changed to 48000 Hz.
>May 27 20:38:00 zig gconfd (root-3812): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 0
>May 27 20:38:00 zig pulseaudio[4210]: module-x11-xsmp.c: X11 session manager not running.
>May 27 20:38:00 zig pulseaudio[4210]: module.c: Failed to load  module "module-x11-xsmp" (argument: ""): initialization failed.
>May 27 20:38:02 zig kernel: kjournald starting.  Commit interval 5 seconds
>May 27 20:38:02 zig kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>May 27 20:38:02 zig kernel: EXT3 FS on sdb2, internal journal
>May 27 20:38:02 zig kernel: EXT3-fs: mounted filesystem with ordered data mode.
>May 27 20:38:02 zig hald: mounted /dev/sdb2 on behalf of uid 0
>May 27 20:38:02 zig hald: mounted /dev/sdb3 on behalf of uid 0
>May 27 20:38:02 zig kernel: kjournald starting.  Commit interval 5 seconds
>May 27 20:38:02 zig kernel: EXT3 FS on sdb1, internal journal
>May 27 20:38:02 zig kernel: EXT3-fs: mounted filesystem with ordered data mode.
>May 27 20:38:02 zig hald: mounted /dev/sdb1 on behalf of uid 0

Actions: View

Attachments on bug 448195: 306873 | 306874 | 306875 | 306876 | 306877 | 306942 | 308760