Attachment 306926 Details for Bug 427697 – dmesg output

dmesg output

dmesg.file (text/plain), 40.09 KB, created by Craig Schenker on 2008-05-28 11:41:16 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Craig Schenker

Created: 2008-05-28 11:41:16 UTC

Size: 40.09 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25.3-18.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Tue May 13 04:54:47 EDT 2008
>Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet i8042.nomux=1 psmouse.proto=imps
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000dfe5b800 (usable)
> BIOS-e820: 00000000dfe5b800 - 00000000e0000000 (reserved)
> BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100002000 - 0000000120000000 (usable)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 917083) 1 entries of 3200 used
>Entering add_active_range(0, 1048578, 1179648) 2 entries of 3200 used
>end_pfn_map = 1179648
>DMI 2.4 present.
>ACPI: RSDP 000FBB00, 0024 (r2 DELL  )
>ACPI: XSDT DFE5D200, 0064 (r1 DELL    M08     27D80510 ASL        61)
>ACPI: FACP DFE5D09C, 00F4 (r4 DELL    M08     27D80510 ASL        61)
>ACPI: DSDT DFE5D800, 614C (r2 INT430 SYSFexxx     1001 INTL 20050624)
>ACPI: FACS DFE6C000, 0040
>ACPI: HPET DFE5D300, 0038 (r1 DELL    M08            1 ASL        61)
>ACPI: APIC DFE5D400, 0068 (r1 DELL    M08     27D80510 ASL        47)
>ACPI: ASF! DFE5D000, 007E (r32 DELL    M08     27D80510 ASL        61)
>ACPI: MCFG DFE5D3C0, 003E (r16 DELL    M08     27D80510 ASL        61)
>ACPI: TCPA DFE5D700, 0032 (r1                        0 ASL         0)
>ACPI: SLIC DFE5D49C, 0176 (r1 DELL    M08     27D80510 ASL        61)
>ACPI: SSDT DFE5B9C0, 04CC (r1  PmRef    CpuPm     3000 INTL 20050624)
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000120000000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 917083) 1 entries of 3200 used
>Entering add_active_range(0, 1048578, 1179648) 2 entries of 3200 used
>Bootmem setup node 0 0000000000000000-0000000120000000
>  NODE_DATA [000000000000e000 - 0000000000015fff]
>  bootmap [0000000000016000 -  0000000000039fff] pages 24
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-75db3b] TEXT DATA BSS
>early res: 3 [37c3c000-37fef7c7] RAMDISK
>early res: 4 [9f000-9ffff] EBDA
>early res: 5 [8000-dfff] PGTABLE
>No mptable found.
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
> [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
> [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
> [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
> [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
> [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
> [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
> [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
> [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0
> [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0
> [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 on node 0
> [ffffe20003000000-ffffe200031fffff] PMD ->ffff810007200000 on node 0
> [ffffe20003800000-ffffe200039fffff] PMD ->ffff810007600000 on node 0
> [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810007a00000 on node 0
> [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810007e00000 on node 0
> [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810008200000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1179648
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   917083
>    0:  1048578 ->  1179648
>On node 0 totalpages: 1048056
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1383 pages reserved
>  DMA zone: 2560 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 898707 pages, LIFO batch:31
>  Normal zone: 1792 pages used for memmap
>  Normal zone: 129278 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
>PM: Registered nosave memory: 00000000dfe5b000 - 00000000dfe5c000
>PM: Registered nosave memory: 00000000dfe5c000 - 00000000e0000000
>PM: Registered nosave memory: 00000000e0000000 - 00000000f4000000
>PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000
>PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000
>PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
>PM: Registered nosave memory: 00000000fec10000 - 00000000fed18000
>PM: Registered nosave memory: 00000000fed18000 - 00000000fed1c000
>PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
>PM: Registered nosave memory: 00000000fed20000 - 00000000fed90000
>PM: Registered nosave memory: 00000000fed90000 - 00000000feda0000
>PM: Registered nosave memory: 00000000feda0000 - 00000000feda6000
>PM: Registered nosave memory: 00000000feda6000 - 00000000fee00000
>PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
>PM: Registered nosave memory: 00000000fee10000 - 00000000ffe00000
>PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
>PM: Registered nosave memory: 0000000100000000 - 0000000100002000
>Allocating PCI resources starting at e2000000 (gap: e0000000:14000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 45232 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1030545
>Policy zone: Normal
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet i8042.nomux=1 psmouse.proto=imps
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>TSC calibrated against PM_TIMER
>time.c: Detected 1994.999 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing software IO TLB between 0x841e000 - 0xc41e000
>Memory: 4057068k/4718592k available (2657k kernel code, 135156k reserved, 1395k data, 356k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 3993.73 BogoMIPS (lpj=1996868)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 12468731
>Detected 12.468 MHz APIC timer.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3989.80 BogoMIPS (lpj=1994900)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=224 bytes
>sizeof(task_struct)=6272 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000001 00000000,00000002
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000002 00000000,00000001
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>net_namespace: 1016 bytes
>Time:  7:22:19  Date: 05/28/08
>NET: Registered protocol family 16
>ACPI: ACPI Dock Station Driver 
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at f4000000 - f7ffffff
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: DMI System Vendor: Dell Inc.
>ACPI: DMI Product Name: Latitude D630                   
>ACPI: DMI Product Version: 
>ACPI: DMI Board Name: 0WM416
>ACPI: DMI BIOS Vendor: Dell Inc.
>ACPI: DMI BIOS Date: 05/16/2008
>ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
>ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
>ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] -  53, should be F7 [20070126]
>ACPI: SSDT DFE6C080, 0043 (r1  LMPWR  DELLLOM     1001 INTL 20050624)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *5
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
> 00:0d: mem resource (0xdff00000-0xe06fffff) overlaps 0000:00:01.0 BAR 9 (0xe0000000-0xefffffff), disabling
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>system 00:05: ioport range 0xc80-0xcaf has been reserved
>system 00:05: ioport range 0xcc0-0xcff could not be reserved
>system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
>system 00:0b: ioport range 0x900-0x97f has been reserved
>system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
>system 00:0b: ioport range 0x1000-0x1005 has been reserved
>system 00:0b: ioport range 0x1008-0x100f has been reserved
>system 00:0c: ioport range 0xf400-0xf4fe has been reserved
>system 00:0c: ioport range 0x1006-0x1007 has been reserved
>system 00:0c: ioport range 0x100a-0x1059 could not be reserved
>system 00:0c: ioport range 0x1060-0x107f has been reserved
>system 00:0c: ioport range 0x1080-0x10bf has been reserved
>system 00:0c: ioport range 0x10c0-0x10df has been reserved
>system 00:0c: ioport range 0x1010-0x102f has been reserved
>system 00:0c: ioport range 0x809-0x809 has been reserved
>system 00:0d: iomem range 0x0-0x9efff could not be reserved
>system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
>system 00:0d: iomem range 0xc0000-0xcffff has been reserved
>system 00:0d: iomem range 0xe0000-0xfffff has been reserved
>system 00:0d: iomem range 0x100000-0xdfe5b7ff could not be reserved
>system 00:0d: iomem range 0xdfe5b800-0xdfefffff could not be reserved
>system 00:0d: iomem range 0xdff00000-0xdfffffff could not be reserved
>system 00:0d: iomem range 0xffe00000-0xffffffff could not be reserved
>system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved
>system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved
>system 00:0d: iomem range 0xfee00000-0xfee0ffff could not be reserved
>system 00:0d: iomem range 0xfed20000-0xfed3ffff could not be reserved
>system 00:0d: iomem range 0xfed45000-0xfed8ffff could not be reserved
>system 00:0d: iomem range 0xfeda0000-0xfeda3fff could not be reserved
>system 00:0d: iomem range 0xfeda4000-0xfeda4fff could not be reserved
>system 00:0d: iomem range 0xfeda5000-0xfeda5fff could not be reserved
>system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved
>system 00:0d: iomem range 0xfed18000-0xfed1bfff could not be reserved
>system 00:0d: iomem range 0xf4000000-0xf7ffffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: e000-efff
>  MEM window: 0xfa000000-0xfeafffff
>  PREFETCH window: 0x00000000e0000000-0x00000000efffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: 0xf9f00000-0xf9ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: disabled.
>  MEM window: 0xf9e00000-0xf9efffff
>  PREFETCH window: disabled.
>PCI: Bus 4, cardbus bridge: 0000:03:01.0
>  IO window: 0x00002000-0x000020ff
>  IO window: 0x00002400-0x000024ff
>  PREFETCH window: 0xf0000000-0xf3ffffff
>  MEM window: 0x120000000-0x123ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 2000-2fff
>  MEM window: 0xf9d00000-0xf9dfffff
>  PREFETCH window: 0x00000000f0000000-0x00000000f3ffffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Enabling device 0000:03:01.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
> it is
>Freeing initrd memory: 3789k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1211959339.653:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie02]
>Allocate Port Service[0000:00:01.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>Allocate Port Service[0000:00:1c.5:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT DFE5C4F6, 0286 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
>ACPI: SSDT DFE5BE8C, 05E5 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT DFE5C77C, 00C4 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
>ACPI: SSDT DFE5C471, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THM] (29 C)
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>Yenta: CardBus bridge found at 0000:03:01.0 [1028:01f9]
>Yenta O2: res at 0x94/0xD4: 00/ea
>Yenta O2: enabling read prefetch/write burst
>Yenta: ISA IRQ mask 0x0cb8, PCI irq 19
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
>pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
>pcmcia: parent PCI bridge Memory window: 0xf9d00000 - 0xf9dfffff
>pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf3ffffff
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>Marking TSC unstable due to TSC halts in idle
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 8:660:370
>Freeing unused kernel memory: 356k freed
>Write protecting the kernel read-only data: 1120k
>Clocksource tsc unstable (delta = -131048056 ns)
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input2
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>hub 2-0:1.0: unable to enumerate USB device on port 5
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.2
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>usb 7-1: new full speed USB device using uhci_hcd and address 2
>usb 7-1: configuration #1 chosen from 1 choice
>hub 7-1:1.0: USB hub found
>hub 7-1:1.0: 4 ports detected
>usb 7-1: New USB device found, idVendor=0b97, idProduct=7761
>usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 7-1.2: new full speed USB device using uhci_hcd and address 3
>usb 7-1.2: configuration #1 chosen from 1 choice
>usb 7-1.2: New USB device found, idVendor=0b97, idProduct=7772
>usb 7-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 7-1.2: Product: O2Micro CCID SC Reader
>usb 7-1.2: Manufacturer: O2
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfb900 irq 17
>ata2: DUMMY
>ata3: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfba00 irq 17
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC7KP, max UDMA/100
>ata1.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/100
>ata3: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54161 SBDO PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1211959438.552:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux:8192 avtab hash slots allocated. Num of rules:166029
>SELinux:8192 avtab hash slots allocated. Num of rules:166029
>security:  8 users, 12 roles, 2308 types, 113 bools, 1 sens, 1024 cats
>security:  72 classes, 166029 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1211959439.236:3): policy loaded auid=4294967295 ses=4294967295
>iTCO_vendor_support: vendor-support=0
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
>ACPI: Lid Switch [LID]
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Battery Slot [BAT1] (battery absent)
>ACPI: AC Adapter [AC] (on-line)
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: Power Button (CM) [PBTN]
>ACPI: WMI: Mapper loaded
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
>ACPI: Sleep Button (CM) [SBTN]
>tg3.c:v3.91 (April 18, 2008)
>ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:09:00.0 to 64
>eth0: Tigon3 [partno(BCM95755m) rev a002 PHY(5755)] (PCI Express) 10/100/1000Base-T Ethernet 00:1c:23:0c:ba:24
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi3 : ata_piix
>scsi4 : ata_piix
>ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
>ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
>ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: found ejectable bay
>ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: Adding notify handler
>ACPI: Bay [\_SB_.PCI0.IDE0.SEC0.MAST] Added
>ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: found ejectable bay
>ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: Adding notify handler
>ACPI: Error installing bay notify handler
>ACPI: Bay [\_SB_.PCI0.IDE1.PRI_.MAST] Added
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:31/device:32/input/input6
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:37/input/input7
>ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:3c/input/input8
>ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
>ata4.00: ATAPI: Optiarc DVD+/-RW AD-5540A, 103C, max UDMA/33
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>input: PC Speaker as /devices/platform/pcspkr/input/input9
>ata4.00: configured for UDMA/33
>ata5: port disabled. ignoring.
>scsi 3:0:0:0: CD-ROM            Optiarc  DVD+-RW AD-5540A 103C PQ: 0 ANSI: 5
>scsi 3:0:0:0: Attached scsi generic sg1 type 5
>ACPI: PCI Interrupt 0000:03:01.4[A] -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:03:01.4, OHCI version 1.10
>iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.26kds
>iwl4965: Copyright(c) 2003-2008 Intel Corporation
>ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:0c:00.0 to 64
>iwl4965: Detected Intel Wireless WiFi Link 4965AGN
>iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels
>phy0: Selected rate control algorithm 'iwl-4965-rs'
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>firewire_core: created device fw0: GUID 314fc0000cbcd581, S400
>ACPI: PCI interrupt for device 0000:0c:00.0 disabled
>input: 4965AGN as /devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/input/input10
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401
>ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x3
>ALSA sound/pci/hda/hda_codec.c:2236: hda_codec: model 'dell-m43' is selected for config 1028:1f9 (Dell Precision)
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0a pin config 0321101f
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0b pin config 03a11020
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0c pin config 90a70330
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0d pin config 90170310
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0e pin config 400000fe
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0f pin config 400000ff
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 14 pin config 400000fd
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 16 pin config 40f000f9
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 17 pin config 400000fa
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 18 pin config 400000fc
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 21 pin config 0144131f
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 22 pin config 40c003f8
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 1f pin config 00000000
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 20 pin config 00000000
>ALSA sound/pci/hda/hda_codec.c:2857: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2861:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2865:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2866:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:2874:    inputs: mic=0xb, fmic=0xc, line=0x0, fline=0x0, cd=0x0, aux=0x0
>ALSA sound/pci/hda/patch_sigmatel.c:2080: stac92xx_add_dyn_out_pins: total dac count=2
>ALSA sound/pci/hda/patch_sigmatel.c:2202: dac_nids=1 (0x10/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Surround Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Center Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave LFE Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Side Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave External Speaker Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker2 Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Surround Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Center Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave LFE Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Side Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave External Speaker Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker2 Playback Switch, skipped
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>mtrr: base(0xe0000000) is not aligned on a size(0x7f00000) boundary
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>Registered led device: iwl-phy0:radio
>Registered led device: iwl-phy0:assoc
>Registered led device: iwl-phy0:RX
>Registered led device: iwl-phy0:TX
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>mtrr: no MTRR for e0000000,7f00000 found
>mtrr: base(0xe0000000) is not aligned on a size(0x7f00000) boundary
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000001 00000000,00000002
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000002 00000000,00000001
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000001 00000000,00000002
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000002 00000000,00000001
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:1c:10:29:b3:1f
>wlan0: RX authentication from 00:1c:10:29:b3:1f (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1c:10:29:b3:1f
>wlan0: RX AssocResp from 00:1c:10:29:b3:1f (capab=0x411 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1c:10:29:b3:1f)
>wlan0 (WE) : Wireless Event too big (342)
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: no IPv6 routers present
>psmouse.c: Mouse at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
>psmouse.c: resync failed, issuing reconnect request

Actions: View

Attachments on bug 427697: 304496 | 304497 | 306926 | 307287