Attachment 308449 Details for Bug 450161 – log from hayes-01 (the shot node)

log from hayes-01 (the shot node)

hayes-01.log (text/plain), 60.43 KB, created by Corey Marthaler on 2008-06-05 16:28:34 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Corey Marthaler

Created: 2008-06-05 16:28:34 UTC

Size: 60.43 KB

patch

obsolete

>Jun  5 10:40:06 hayes-01 qarshd[1586]: Running cmdline: reboot -fin & 
>Jun  5 10:40:06 hayes-01 avahi-daemon[2856]: Interface eth0.IPv6 no longer relevant for mDNS.
>Jun  5 10:40:06 hayes-01 avahi-daemon[2856]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::21d:9ff:fe03:c8f0.
>Jun  5 10:40:06 hayes-01 avahi-daemon[2856]: Interface eth0.IPv4 no longer relevant for mDNS.
>Jun  5 10:40:06 hayes-01 avahi-daemon[2856]: Leaving mDNS multicast group on interface eth0.IPv4 with address 10.15.89.135.
>Jun  5 10:40:06 hayes-01 dhclient: receive_packet failed on eth0: Network is down
>Jun  5 10:40:06 hayes-01 kernel: md: stopping all md devices.
>Jun  5 10:40:06 hayes-01 avahi-daemon[2856]: Withdrawing address record for fe80::21d:9ff:fe03:c8f0 on eth0.
>Jun  5 10:40:06 hayes-01 avahi-daemon[2856]: Withdrawing address record for 10.15.89.135 on eth0.
>Jun  5 10:40:07 hayes-01 kernel: Synchronizing SCSI cache for disk sda: 
>Jun  5 10:40:07 hayes-01 kernel: Restarting system.
>Jun  5 10:40:07 hayes-01 kernel: .
>Jun  5 10:40:07 hayes-01 kernel: machine restart
>Jun  5 10:42:39 hayes-01 syslogd 1.4.1: restart.
>Jun  5 10:42:39 hayes-01 kernel: klogd 1.4.1, log source = /proc/kmsg started.
>Jun  5 10:42:39 hayes-01 kernel: Linux version 2.6.18-92.el5 (brewbuilder@ls20-bc2-13.build.redhat.com) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-41)) #1 SMP Tue Apr 29 13:16:15 EDT 2008
>Jun  5 10:42:39 hayes-01 kernel: Command line: ro root=/dev/VolGroup00/LogVol00 console=ttyS0,115200n8
>Jun  5 10:42:39 hayes-01 kernel: BIOS-provided physical RAM map:
>Jun  5 10:42:39 hayes-01 kernel:  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
>Jun  5 10:42:39 hayes-01 kernel:  BIOS-e820: 0000000000100000 - 00000000dfed2000 (usable)
>Jun  5 10:42:39 hayes-01 kernel:  BIOS-e820: 00000000dfed2000 - 00000000dfee8000 (reserved)
>Jun  5 10:42:39 hayes-01 kernel:  BIOS-e820: 00000000dfee8000 - 00000000dff07c00 (ACPI data)
>Jun  5 10:42:39 hayes-01 kernel:  BIOS-e820: 00000000dff07c00 - 00000000e0000000 (reserved)
>Jun  5 10:42:39 hayes-01 kernel:  BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
>Jun  5 10:42:39 hayes-01 kernel:  BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
>Jun  5 10:42:39 hayes-01 kernel:  BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
>Jun  5 10:42:39 hayes-01 kernel: DMI 2.4 present.
>Jun  5 10:42:39 hayes-01 kernel: SRAT: PXM 0 -> APIC 0 -> Node 0
>Jun  5 10:42:39 hayes-01 kernel: SRAT: PXM 0 -> APIC 1 -> Node 0
>Jun  5 10:42:39 hayes-01 kernel: SRAT: PXM 1 -> APIC 2 -> Node 1
>Jun  5 10:42:39 hayes-01 kernel: SRAT: PXM 1 -> APIC 3 -> Node 1
>Jun  5 10:42:39 hayes-01 kernel: SRAT: Node 0 PXM 0 0-a0000
>Jun  5 10:42:39 hayes-01 kernel: SRAT: Node 0 PXM 0 0-e0000000
>Jun  5 10:42:39 hayes-01 kernel: SRAT: Node 0 PXM 0 0-120000000
>Jun  5 10:42:39 hayes-01 kernel: SRAT: Node 1 PXM 1 120000000-220000000
>Jun  5 10:42:39 hayes-01 kernel: Bootmem setup node 0 0000000000000000-0000000120000000
>Jun  5 10:42:39 hayes-01 kernel: Bootmem setup node 1 0000000120000000-0000000220000000
>Jun  5 10:42:39 hayes-01 kernel: Memory for crash kernel (0x0 to 0x0) notwithin permissible range
>Jun  5 10:42:39 hayes-01 kernel: disabling kdump
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PM-Timer IO Port: 0x808
>Jun  5 10:42:39 hayes-01 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Jun  5 10:42:39 hayes-01 kernel: Processor #0 15:1 APIC version 16
>Jun  5 10:42:39 hayes-01 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>Jun  5 10:42:39 hayes-01 kernel: Processor #2 15:1 APIC version 16
>Jun  5 10:42:39 hayes-01 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>Jun  5 10:42:39 hayes-01 kernel: Processor #1 15:1 APIC version 16
>Jun  5 10:42:39 hayes-01 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>Jun  5 10:42:39 hayes-01 kernel: Processor #3 15:1 APIC version 16
>Jun  5 10:42:39 hayes-01 kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled)
>Jun  5 10:42:39 hayes-01 kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] disabled)
>Jun  5 10:42:39 hayes-01 kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled)
>Jun  5 10:42:39 hayes-01 kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] disabled)
>Jun  5 10:42:39 hayes-01 kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>Jun  5 10:42:39 hayes-01 kernel: ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>Jun  5 10:42:39 hayes-01 kernel: IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-15
>Jun  5 10:42:39 hayes-01 kernel: ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[32])
>Jun  5 10:42:39 hayes-01 kernel: IOAPIC[1]: apic_id 5, version 17, address 0xfec01000, GSI 32-47
>Jun  5 10:42:39 hayes-01 kernel: ACPI: IOAPIC (id[0x06] address[0xfec02000] gsi_base[64])
>Jun  5 10:42:39 hayes-01 kernel: IOAPIC[2]: apic_id 6, version 17, address 0xfec02000, GSI 64-79
>Jun  5 10:42:39 hayes-01 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>Jun  5 10:42:39 hayes-01 kernel: Setting APIC routing to physical flat
>Jun  5 10:42:39 hayes-01 kernel: ACPI: HPET id: 0x1166a201 base: 0xfed00000
>Jun  5 10:42:39 hayes-01 kernel: Using ACPI (MADT) for SMP configuration information
>Jun  5 10:42:39 hayes-01 kernel: Nosave address range: 00000000000a0000 - 0000000000100000
>Jun  5 10:42:39 hayes-01 kernel: Nosave address range: 00000000dfed2000 - 00000000dfee8000
>Jun  5 10:42:39 hayes-01 kernel: Nosave address range: 00000000dfee8000 - 00000000dff07000
>Jun  5 10:42:39 hayes-01 kernel: Nosave address range: 00000000dff07000 - 00000000dff08000
>Jun  5 10:42:39 hayes-01 kernel: Nosave address range: 00000000dff08000 - 00000000e0000000
>Jun  5 10:42:39 hayes-01 kernel: Nosave address range: 00000000e0000000 - 00000000f0000000
>Jun  5 10:42:39 hayes-01 kernel: Nosave address range: 00000000f0000000 - 00000000f8000000
>Jun  5 10:42:39 hayes-01 kernel: Nosave address range: 00000000f8000000 - 00000000fe000000
>Jun  5 10:42:39 hayes-01 kernel: Nosave address range: 00000000fe000000 - 0000000100000000
>Jun  5 10:42:39 hayes-01 kernel: Allocating PCI resources starting at e1000000 (gap: e0000000:10000000)
>Jun  5 10:42:39 hayes-01 kernel: SMP: Allowing 8 CPUs, 4 hotplug CPUs
>Jun  5 10:42:39 hayes-01 kernel: Built 2 zonelists.  Total pages: 2065036
>Jun  5 10:42:39 hayes-01 kernel: Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=ttyS0,115200n8
>Jun  5 10:42:39 hayes-01 kernel: Initializing CPU#0
>Jun  5 10:42:39 hayes-01 kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
>Jun  5 10:42:39 hayes-01 kernel: Console: colour VGA+ 80x25
>Jun  5 10:42:39 hayes-01 kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Jun  5 10:42:39 hayes-01 kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Jun  5 10:42:39 hayes-01 kernel: Checking aperture...
>Jun  5 10:42:39 hayes-01 kernel: CPU 0: aperture @ f4000000 size 64 MB
>Jun  5 10:42:39 hayes-01 kernel: CPU 1: aperture @ f4000000 size 64 MB
>Jun  5 10:42:39 hayes-01 kernel: Memory: 8243396k/8912896k available (2457k kernel code, 143620k reserved, 1246k data, 196k init)
>Jun  5 10:42:39 hayes-01 kernel: Calibrating delay using timer specific routine.. 4003.67 BogoMIPS (lpj=2001837)
>Jun  5 10:42:39 hayes-01 kernel: Security Framework v1.0.0 initialized
>Jun  5 10:42:39 hayes-01 kernel: SELinux:  Initializing.
>Jun  5 10:42:39 hayes-01 kernel: selinux_register_security:  Registering secondary module capability
>Jun  5 10:42:39 hayes-01 kernel: Capability LSM initialized as secondary
>Jun  5 10:42:39 hayes-01 kernel: Mount-cache hash table entries: 256
>Jun  5 10:42:39 hayes-01 kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>Jun  5 10:42:39 hayes-01 kernel: CPU: L2 Cache: 1024K (64 bytes/line)
>Jun  5 10:42:39 hayes-01 kernel: CPU 0/0 -> Node 0
>Jun  5 10:42:39 hayes-01 kernel: CPU: Physical Processor ID: 0
>Jun  5 10:42:39 hayes-01 kernel: CPU: Processor Core ID: 0
>Jun  5 10:42:39 hayes-01 kernel: SMP alternatives: switching to UP code
>Jun  5 10:42:39 hayes-01 kernel: ACPI: Core revision 20060707
>Jun  5 10:42:39 hayes-01 kernel: Using local APIC timer interrupts.
>Jun  5 10:42:39 hayes-01 kernel: result 12501468
>Jun  5 10:42:39 hayes-01 kernel: Detected 12.501 MHz APIC timer.
>Jun  5 10:42:39 hayes-01 kernel: SMP alternatives: switching to SMP code
>Jun  5 10:42:39 hayes-01 kernel: Booting processor 1/4 APIC 0x2
>Jun  5 10:42:39 hayes-01 kernel: Initializing CPU#1
>Jun  5 10:42:39 hayes-01 kernel: Calibrating delay using timer specific routine.. 4000.19 BogoMIPS (lpj=2000099)
>Jun  5 10:42:39 hayes-01 kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>Jun  5 10:42:39 hayes-01 kernel: CPU: L2 Cache: 1024K (64 bytes/line)
>Jun  5 10:42:39 hayes-01 kernel: CPU 1/2 -> Node 1
>Jun  5 10:42:39 hayes-01 kernel: CPU: Physical Processor ID: 1
>Jun  5 10:42:39 hayes-01 kernel: CPU: Processor Core ID: 0
>Jun  5 10:42:39 hayes-01 kernel: Dual-Core AMD Opteron(tm) Processor 2212 HE stepping 03
>Jun  5 10:42:39 hayes-01 kernel: CPU 1: Syncing TSC to CPU 0.
>Jun  5 10:42:39 hayes-01 kernel: CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 1046 cycles)
>Jun  5 10:42:39 hayes-01 kernel: SMP alternatives: switching to SMP code
>Jun  5 10:42:39 hayes-01 kernel: Booting processor 2/4 APIC 0x1
>Jun  5 10:42:39 hayes-01 kernel: Initializing CPU#2
>Jun  5 10:42:39 hayes-01 kernel: Calibrating delay using timer specific routine.. 4000.07 BogoMIPS (lpj=2000036)
>Jun  5 10:42:39 hayes-01 kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>Jun  5 10:42:39 hayes-01 kernel: CPU: L2 Cache: 1024K (64 bytes/line)
>Jun  5 10:42:39 hayes-01 kernel: CPU 2/1 -> Node 0
>Jun  5 10:42:39 hayes-01 kernel: CPU: Physical Processor ID: 0
>Jun  5 10:42:39 hayes-01 kernel: CPU: Processor Core ID: 1
>Jun  5 10:42:39 hayes-01 kernel: Dual-Core AMD Opteron(tm) Processor 2212 HE stepping 03
>Jun  5 10:42:39 hayes-01 kernel: CPU 2: Syncing TSC to CPU 0.
>Jun  5 10:42:39 hayes-01 kernel: CPU 2: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 593 cycles)
>Jun  5 10:42:39 hayes-01 kernel: SMP alternatives: switching to SMP code
>Jun  5 10:42:39 hayes-01 kernel: Booting processor 3/4 APIC 0x3
>Jun  5 10:42:39 hayes-01 kernel: Initializing CPU#3
>Jun  5 10:42:39 hayes-01 kernel: Calibrating delay using timer specific routine.. 4000.15 BogoMIPS (lpj=2000079)
>Jun  5 10:42:39 hayes-01 kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>Jun  5 10:42:39 hayes-01 kernel: CPU: L2 Cache: 1024K (64 bytes/line)
>Jun  5 10:42:39 hayes-01 kernel: CPU 3/3 -> Node 1
>Jun  5 10:42:39 hayes-01 kernel: CPU: Physical Processor ID: 1
>Jun  5 10:42:39 hayes-01 kernel: CPU: Processor Core ID: 1
>Jun  5 10:42:39 hayes-01 kernel: Dual-Core AMD Opteron(tm) Processor 2212 HE stepping 03
>Jun  5 10:42:39 hayes-01 kernel: CPU 3: Syncing TSC to CPU 0.
>Jun  5 10:42:39 hayes-01 kernel: CPU 3: synchronized TSC with CPU 0 (last diff -3 cycles, maxerr 1046 cycles)
>Jun  5 10:42:39 hayes-01 kernel: Brought up 4 CPUs
>Jun  5 10:42:39 hayes-01 kernel: testing NMI watchdog ... OK.
>Jun  5 10:42:39 hayes-01 kernel: time.c: Using 14.318180 MHz WALL HPET GTOD HPET timer.
>Jun  5 10:42:39 hayes-01 kernel: time.c: Detected 2000.235 MHz processor.
>Jun  5 10:42:39 hayes-01 rpc.statd[2500]: Version 1.0.9 Starting
>Jun  5 10:42:39 hayes-01 kernel: migration_cost=391,456
>Jun  5 10:42:39 hayes-01 kernel: checking if image is initramfs... it is
>Jun  5 10:42:39 hayes-01 kernel: Freeing initrd memory: 3635k freed
>Jun  5 10:42:39 hayes-01 kernel: NET: Registered protocol family 16
>Jun  5 10:42:39 hayes-01 kernel: No dock devices found.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: bus type pci registered
>Jun  5 10:42:39 hayes-01 kernel: PCI: Using MMCONFIG at f0000000
>Jun  5 10:42:39 hayes-01 kernel: PCI: No mmconfig possible on device 0:18
>Jun  5 10:42:39 hayes-01 kernel: PCI: No mmconfig possible on device 0:19
>Jun  5 10:42:39 hayes-01 kernel: PCI: Buses that can't use MMCONFIG will use type 1 PCI conf access.
>Jun  5 10:42:39 hayes-01 kernel: mtrr: your CPUs had inconsistent fixed MTRR settings
>Jun  5 10:42:39 hayes-01 kernel: mtrr: probably your BIOS does not setup all CPUs.
>Jun  5 10:42:39 hayes-01 kernel: mtrr: corrected configuration.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: Interpreter enabled
>Jun  5 10:42:39 hayes-01 kernel: ACPI: Using IOAPIC for interrupt routing
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
>Jun  5 10:42:39 hayes-01 kernel: PCI: Enabling HT MSI Mapping on 0000:00:01.0
>Jun  5 10:42:39 hayes-01 kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.1
>Jun  5 10:42:39 hayes-01 rpc.statd[2500]: statd running as root. chown /var/lib/nfs/statd/sm to choose different user 
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK10] (IRQs 3 4 5 *6 7 10 11)
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK11] (IRQs 3 4 *5 6 7 10 11)
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK12] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK13] (IRQs 3 4 5 *6 7 10 11)
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK14] (IRQs 3 4 *5 6 7 10 11)
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK15] (IRQs 3 4 5 6 7 *10 11)
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK16] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK17] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK18] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK19] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK1A] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK1B] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK1C] (IRQs 3 4 5 6 7 *10 11)
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK1D] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK1E] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK1F] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK20] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK21] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK22] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK23] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK24] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK25] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK26] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK27] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK28] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK29] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK2A] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK2B] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK2C] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK2D] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK2E] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK2F] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 12 14)
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 *6 7 10 11 12 14)
>Jun  5 10:42:39 hayes-01 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
>Jun  5 10:42:39 hayes-01 kernel: pnp: PnP ACPI init
>Jun  5 10:42:39 hayes-01 kernel: pnp: PnP ACPI: found 11 devices
>Jun  5 10:42:39 hayes-01 kernel: usbcore: registered new driver usbfs
>Jun  5 10:42:39 hayes-01 kernel: usbcore: registered new driver hub
>Jun  5 10:42:39 hayes-01 kernel: PCI: Using ACPI for IRQ routing
>Jun  5 10:42:39 hayes-01 kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>Jun  5 10:42:39 hayes-01 kernel: NetLabel: Initializing
>Jun  5 10:42:39 hayes-01 kernel: NetLabel:  domain hash size = 128
>Jun  5 10:42:39 hayes-01 kernel: NetLabel:  protocols = UNLABELED CIPSOv4
>Jun  5 10:42:39 hayes-01 kernel: NetLabel:  unlabeled traffic allowed by default
>Jun  5 10:42:39 hayes-01 kernel: hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0
>Jun  5 10:42:39 hayes-01 kernel: hpet0: 3 64-bit timers, 14318180 Hz
>Jun  5 10:42:39 hayes-01 kernel: PCI-DMA: Disabling AGP.
>Jun  5 10:42:39 hayes-01 kernel: PCI-DMA: aperture base @ f4000000 size 65536 KB
>Jun  5 10:42:39 hayes-01 kernel: PCI-DMA: using GART IOMMU.
>Jun  5 10:42:39 hayes-01 kernel: PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>Jun  5 10:42:39 hayes-01 kernel: pnp: 00:07: ioport range 0x800-0x87f could not be reserved
>Jun  5 10:42:39 hayes-01 kernel: pnp: 00:07: ioport range 0x900-0x900 has been reserved
>Jun  5 10:42:39 hayes-01 kernel: pnp: 00:07: ioport range 0x880-0x89f has been reserved
>Jun  5 10:42:39 hayes-01 kernel: pnp: 00:07: ioport range 0xcd6-0xcd7 has been reserved
>Jun  5 10:42:39 hayes-01 kernel: pnp: 00:07: ioport range 0x40b-0x40b has been reserved
>Jun  5 10:42:39 hayes-01 kernel: pnp: 00:07: ioport range 0x4d6-0x4d6 has been reserved
>Jun  5 10:42:39 hayes-01 kernel: pnp: 00:08: ioport range 0xca8-0xca8 has been reserved
>Jun  5 10:42:39 hayes-01 kernel: pnp: 00:08: ioport range 0xcac-0xcac has been reserved
>Jun  5 10:42:39 hayes-01 kernel: PCI: Bridge: 0000:03:0d.0
>Jun  5 10:42:39 hayes-01 kernel:   IO window: disabled.
>Jun  5 10:42:39 hayes-01 kernel:   MEM window: disabled.
>Jun  5 10:42:39 hayes-01 kernel:   PREFETCH window: disabled.
>Jun  5 10:42:39 hayes-01 kernel: PCI: Bridge: 0000:00:01.0
>Jun  5 10:42:39 hayes-01 kernel:   IO window: e000-efff
>Jun  5 10:42:39 hayes-01 kernel:   MEM window: efa00000-efbfffff
>Jun  5 10:42:39 hayes-01 kernel:   PREFETCH window: e8000000-e80fffff
>Jun  5 10:42:39 hayes-01 kernel: PCI: Bridge: 0000:00:07.0
>Jun  5 10:42:39 hayes-01 kernel:   IO window: disabled.
>Jun  5 10:42:39 hayes-01 kernel:   MEM window: disabled.
>Jun  5 10:42:39 hayes-01 kernel:   PREFETCH window: disabled.
>Jun  5 10:42:39 hayes-01 kernel: PCI: Bridge: 0000:00:08.0
>Jun  5 10:42:39 hayes-01 kernel:   IO window: disabled.
>Jun  5 10:42:39 hayes-01 kernel:   MEM window: efc00000-efcfffff
>Jun  5 10:42:39 hayes-01 kernel:   PREFETCH window: disabled.
>Jun  5 10:42:39 hayes-01 kernel: PCI: Bridge: 0000:00:09.0
>Jun  5 10:42:39 hayes-01 kernel:   IO window: disabled.
>Jun  5 10:42:39 hayes-01 kernel:   MEM window: efd00000-efdfffff
>Jun  5 10:42:39 hayes-01 kernel:   PREFETCH window: disabled.
>Jun  5 10:42:39 hayes-01 kernel: PCI: Bridge: 0000:00:0a.0
>Jun  5 10:42:39 hayes-01 kernel:   IO window: d000-dfff
>Jun  5 10:42:39 hayes-01 kernel:   MEM window: efe00000-efffffff
>Jun  5 10:42:39 hayes-01 kernel:   PREFETCH window: disabled.
>Jun  5 10:42:39 hayes-01 kernel: PCI: Bridge: 0000:00:0b.0
>Jun  5 10:42:39 hayes-01 kernel:   IO window: disabled.
>Jun  5 10:42:39 hayes-01 kernel:   MEM window: disabled.
>Jun  5 10:42:39 hayes-01 kernel:   PREFETCH window: disabled.
>Jun  5 10:42:39 hayes-01 kernel: GSI 16 sharing vector 0xA9 and IRQ 16
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 32 (level, low) -> IRQ 169
>Jun  5 10:42:39 hayes-01 kernel: GSI 17 sharing vector 0xB1 and IRQ 17
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 33 (level, low) -> IRQ 177
>Jun  5 10:42:39 hayes-01 kernel: GSI 18 sharing vector 0xB9 and IRQ 18
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 37 (level, low) -> IRQ 185
>Jun  5 10:42:39 hayes-01 kernel: GSI 19 sharing vector 0xC1 and IRQ 19
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 35 (level, low) -> IRQ 193
>Jun  5 10:42:39 hayes-01 kernel: GSI 20 sharing vector 0xC9 and IRQ 20
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 36 (level, low) -> IRQ 201
>Jun  5 10:42:39 hayes-01 kernel: NET: Registered protocol family 2
>Jun  5 10:42:39 hayes-01 kernel: IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Jun  5 10:42:39 hayes-01 kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>Jun  5 10:42:39 hayes-01 kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>Jun  5 10:42:39 hayes-01 kernel: TCP: Hash tables configured (established 262144 bind 65536)
>Jun  5 10:42:39 hayes-01 kernel: TCP reno registered
>Jun  5 10:42:39 hayes-01 kernel: audit: initializing netlink socket (disabled)
>Jun  5 10:42:39 hayes-01 kernel: audit(1212680531.434:1): initialized
>Jun  5 10:42:39 hayes-01 kernel: Total HugeTLB memory allocated, 0
>Jun  5 10:42:39 hayes-01 kernel: VFS: Disk quotas dquot_6.5.1
>Jun  5 10:42:39 hayes-01 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Jun  5 10:42:39 hayes-01 kernel: Initializing Cryptographic API
>Jun  5 10:42:39 hayes-01 kernel: ksign: Installing public key data
>Jun  5 10:42:39 hayes-01 kernel: Loading keyring
>Jun  5 10:42:39 hayes-01 kernel: - Added public key 6E24E25C96667C37
>Jun  5 10:42:39 hayes-01 kernel: - User ID: Red Hat, Inc. (Kernel Module GPG key)
>Jun  5 10:42:39 hayes-01 kernel: io scheduler noop registered
>Jun  5 10:42:39 hayes-01 kernel: io scheduler anticipatory registered
>Jun  5 10:42:39 hayes-01 kernel: io scheduler deadline registered
>Jun  5 10:42:39 hayes-01 kernel: io scheduler cfq registered (default)
>Jun  5 10:42:39 hayes-01 kernel: Detected use of extended apic ids on hypertransport bus
>Jun  5 10:42:39 hayes-01 kernel: Detected use of extended apic ids on hypertransport bus
>Jun  5 10:42:39 hayes-01 kernel: assign_interrupt_mode Found MSI capability
>Jun  5 10:42:39 hayes-01 last message repeated 4 times
>Jun  5 10:42:39 hayes-01 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Jun  5 10:42:39 hayes-01 kernel: ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>Jun  5 10:42:39 hayes-01 kernel: ACPI: Getting cpuindex for acpiid 0x5
>Jun  5 10:42:39 hayes-01 kernel: ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>Jun  5 10:42:39 hayes-01 kernel: ACPI: Getting cpuindex for acpiid 0x6
>Jun  5 10:42:39 hayes-01 kernel: ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>Jun  5 10:42:39 hayes-01 kernel: ACPI: Getting cpuindex for acpiid 0x7
>Jun  5 10:42:39 hayes-01 kernel: ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>Jun  5 10:42:39 hayes-01 kernel: ACPI: Getting cpuindex for acpiid 0x8
>Jun  5 10:42:39 hayes-01 kernel: Real Time Clock Driver v1.12ac
>Jun  5 10:42:39 hayes-01 kernel: Non-volatile memory driver v1.2
>Jun  5 10:42:39 hayes-01 kernel: Linux agpgart interface v0.101 (c) Dave Jones
>Jun  5 10:42:39 hayes-01 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Jun  5 10:42:39 hayes-01 kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Jun  5 10:42:39 hayes-01 kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>Jun  5 10:42:39 hayes-01 kernel: 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Jun  5 10:42:39 hayes-01 kernel: 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>Jun  5 10:42:39 hayes-01 kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Jun  5 10:42:39 hayes-01 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>Jun  5 10:42:39 hayes-01 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Jun  5 10:42:39 hayes-01 kernel: SvrWks HT1000: IDE controller at PCI slot 0000:00:02.1
>Jun  5 10:42:39 hayes-01 kernel: SvrWks HT1000: chipset revision 0
>Jun  5 10:42:39 hayes-01 kernel: SvrWks HT1000: not 100% native mode: will probe irqs later
>Jun  5 10:42:39 hayes-01 kernel:     ide0: BM-DMA at 0x08c0-0x08c7, BIOS settings: hda:DMA, hdb:pio
>Jun  5 10:42:39 hayes-01 kernel: hda: HL-DT-ST GCR-8240N, ATAPI CD/DVD-ROM drive
>Jun  5 10:42:39 hayes-01 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Jun  5 10:42:39 hayes-01 kernel: ide-floppy driver 0.99.newide
>Jun  5 10:42:39 hayes-01 kernel: usbcore: registered new driver hiddev
>Jun  5 10:42:39 hayes-01 kernel: usbcore: registered new driver usbhid
>Jun  5 10:42:39 hayes-01 kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>Jun  5 10:42:39 hayes-01 kernel: PNP: No PS/2 controller found. Probing ports directly.
>Jun  5 10:42:39 hayes-01 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
>Jun  5 10:42:39 hayes-01 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
>Jun  5 10:42:39 hayes-01 kernel: mice: PS/2 mouse device common for all mice
>Jun  5 10:42:39 hayes-01 kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>Jun  5 10:42:39 hayes-01 kernel: md: bitmap version 4.39
>Jun  5 10:42:39 hayes-01 kernel: TCP bic registered
>Jun  5 10:42:39 hayes-01 kernel: Initializing IPsec netlink socket
>Jun  5 10:42:39 hayes-01 kernel: NET: Registered protocol family 1
>Jun  5 10:42:39 hayes-01 kernel: NET: Registered protocol family 17
>Jun  5 10:42:39 hayes-01 kernel: powernow-k8: Pre-initialization of ACPI failed
>Jun  5 10:42:39 hayes-01 kernel: powernow-k8: Found 2 Dual-Core AMD Opteron(tm) Processor 2212 HE processors (4 cpu cores) (version 2.20.00)
>Jun  5 10:42:39 hayes-01 kernel: powernow-k8: Your BIOS does not provide _PSS objects.  PowerNow! does not work on SMP systems without _PSS objects.  Complain to your BIOS vendor.
>Jun  5 10:42:39 hayes-01 last message repeated 3 times
>Jun  5 10:42:39 hayes-01 kernel: ACPI: (supports S0 S4 S5)
>Jun  5 10:42:39 hayes-01 kernel: Freeing unused kernel memory: 196k freed
>Jun  5 10:42:39 hayes-01 kernel: Write protecting the kernel read-only data: 475k
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK01] enabled at IRQ 11
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt 0000:00:03.2[A] -> Link [LK01] -> GSI 11 (level, low) -> IRQ 11
>Jun  5 10:42:39 hayes-01 kernel: ehci_hcd 0000:00:03.2: EHCI Host Controller
>Jun  5 10:42:39 hayes-01 kernel: ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
>Jun  5 10:42:39 hayes-01 kernel: ehci_hcd 0000:00:03.2: irq 11, io mem 0xef9ef000
>Jun  5 10:42:39 hayes-01 kernel: ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>Jun  5 10:42:39 hayes-01 kernel: usb usb1: configuration #1 chosen from 1 choice
>Jun  5 10:42:39 hayes-01 kernel: hub 1-0:1.0: USB hub found
>Jun  5 10:42:39 hayes-01 kernel: hub 1-0:1.0: 4 ports detected
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LK01] -> GSI 11 (level, low) -> IRQ 11
>Jun  5 10:42:39 hayes-01 kernel: ohci_hcd 0000:00:03.0: OHCI Host Controller
>Jun  5 10:42:39 hayes-01 kernel: ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
>Jun  5 10:42:39 hayes-01 kernel: ohci_hcd 0000:00:03.0: irq 11, io mem 0xef9ed000
>Jun  5 10:42:39 hayes-01 kernel: usb usb2: configuration #1 chosen from 1 choice
>Jun  5 10:42:39 hayes-01 kernel: hub 2-0:1.0: USB hub found
>Jun  5 10:42:39 hayes-01 kernel: hub 2-0:1.0: 2 ports detected
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LK01] -> GSI 11 (level, low) -> IRQ 11
>Jun  5 10:42:39 hayes-01 kernel: ohci_hcd 0000:00:03.1: OHCI Host Controller
>Jun  5 10:42:39 hayes-01 kernel: ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
>Jun  5 10:42:39 hayes-01 kernel: usb 1-3: new high speed USB device using ehci_hcd and address 2
>Jun  5 10:42:39 hayes-01 kernel: ohci_hcd 0000:00:03.1: irq 11, io mem 0xef9ee000
>Jun  5 10:42:39 hayes-01 kernel: usb usb3: configuration #1 chosen from 1 choice
>Jun  5 10:42:39 hayes-01 kernel: hub 3-0:1.0: USB hub found
>Jun  5 10:42:39 hayes-01 kernel: hub 3-0:1.0: 2 ports detected
>Jun  5 10:42:39 hayes-01 kernel: usb 1-3: configuration #1 chosen from 1 choice
>Jun  5 10:42:39 hayes-01 kernel: hub 1-3:1.0: USB hub found
>Jun  5 10:42:39 hayes-01 kernel: hub 1-3:1.0: 2 ports detected
>Jun  5 10:42:39 hayes-01 kernel: USB Universal Host Controller Interface driver v3.0
>Jun  5 10:42:39 hayes-01 kernel: SCSI subsystem initialized
>Jun  5 10:42:39 hayes-01 hcid[2564]: Bluetooth HCI daemon
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt Link [LK07] enabled at IRQ 10
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt 0000:03:0e.0[A] -> Link [LK07] -> GSI 10 (level, low) -> IRQ 10
>Jun  5 10:42:39 hayes-01 kernel: scsi0 : sata_svw
>Jun  5 10:42:39 hayes-01 kernel: scsi1 : sata_svw
>Jun  5 10:42:39 hayes-01 kernel: scsi2 : sata_svw
>Jun  5 10:42:39 hayes-01 kernel: scsi3 : sata_svw
>Jun  5 10:42:39 hayes-01 kernel: ata1: SATA max UDMA/133 mmio m8192@0xefbfe000 port 0xefbfe000 irq 10
>Jun  5 10:42:39 hayes-01 kernel: ata2: SATA max UDMA/133 mmio m8192@0xefbfe000 port 0xefbfe100 irq 10
>Jun  5 10:42:39 hayes-01 kernel: ata3: SATA max UDMA/133 mmio m8192@0xefbfe000 port 0xefbfe200 irq 10
>Jun  5 10:42:39 hayes-01 kernel: ata4: SATA max UDMA/133 mmio m8192@0xefbfe000 port 0xefbfe300 irq 10
>Jun  5 10:42:39 hayes-01 kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>Jun  5 10:42:39 hayes-01 kernel: ata1.00: ATA-7: WDC WD800JD-75MSA3, 10.01E04, max UDMA/133
>Jun  5 10:42:39 hayes-01 kernel: ata1.00: 156250000 sectors, multi 8: LBA48 NCQ (depth 0/32)
>Jun  5 10:42:39 hayes-01 kernel: ata1.00: configured for UDMA/133
>Jun  5 10:42:39 hayes-01 kernel: ata2: SATA link down (SStatus 4 SControl 300)
>Jun  5 10:42:39 hayes-01 kernel: ata3: SATA link down (SStatus 4 SControl 300)
>Jun  5 10:42:39 hayes-01 kernel: ata4: SATA link down (SStatus 4 SControl 300)
>Jun  5 10:42:39 hayes-01 kernel:   Vendor: ATA       Model: WDC WD800JD-75MS  Rev: 10.0
>Jun  5 10:42:39 hayes-01 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
>Jun  5 10:42:39 hayes-01 kernel: SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB)
>Jun  5 10:42:39 hayes-01 kernel: sda: Write Protect is off
>Jun  5 10:42:39 hayes-01 kernel: SCSI device sda: drive cache: write back
>Jun  5 10:42:39 hayes-01 kernel: SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB)
>Jun  5 10:42:39 hayes-01 kernel: sda: Write Protect is off
>Jun  5 10:42:39 hayes-01 kernel: SCSI device sda: drive cache: write back
>Jun  5 10:42:39 hayes-01 kernel:  sda: sda1 sda2
>Jun  5 10:42:39 hayes-01 kernel: sd 0:0:0:0: Attached scsi disk sda
>Jun  5 10:42:39 hayes-01 kernel: QLogic Fibre Channel HBA Driver
>Jun  5 10:42:39 hayes-01 hcid[2564]: Register path:/org/bluez fallback:1
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 35 (level, low) -> IRQ 193
>Jun  5 10:42:39 hayes-01 sdpd[2570]: Bluetooth SDP daemon 
>Jun  5 10:42:39 hayes-01 kernel: qla2xxx 0000:06:00.0: Found an ISP2432, irq 193, iobase 0xffffc20000020000
>Jun  5 10:42:39 hayes-01 kernel: qla2xxx 0000:06:00.0: Configuring PCI space...
>Jun  5 10:42:39 hayes-01 kernel: qla2xxx 0000:06:00.0: Configure NVRAM parameters...
>Jun  5 10:42:39 hayes-01 kernel: qla2xxx 0000:06:00.0: Verifying loaded RISC code...
>Jun  5 10:42:39 hayes-01 kernel: qla2xxx 0000:06:00.0: Allocated (64 KB) for EFT...
>Jun  5 10:42:39 hayes-01 kernel: qla2xxx 0000:06:00.0: Allocated (1413 KB) for firmware dump...
>Jun  5 10:42:39 hayes-01 kernel: scsi4 : qla2xxx
>Jun  5 10:42:39 hayes-01 kernel: qla2xxx 0000:06:00.0: 
>Jun  5 10:42:39 hayes-01 kernel:  QLogic Fibre Channel HBA Driver: 8.02.00-k5-rhel5.2-04
>Jun  5 10:42:39 hayes-01 kernel:   QLogic QLE2460 - PCI-Express to 4Gb FC, Single Channel
>Jun  5 10:42:39 hayes-01 kernel:   ISP2432: PCIe (2.5Gb/s x4) @ 0000:06:00.0 hdma+, host#=4, fw=4.03.02 [IP] [Multi-ID] 
>Jun  5 10:42:39 hayes-01 kernel: device-mapper: uevent: version 1.0.3
>Jun  5 10:42:39 hayes-01 kernel: device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
>Jun  5 10:42:39 hayes-01 kernel: EXT3-fs: INFO: recovery required on readonly filesystem.
>Jun  5 10:42:39 hayes-01 kernel: EXT3-fs: write access will be enabled during recovery.
>Jun  5 10:42:39 hayes-01 kernel: kjournald starting.  Commit interval 5 seconds
>Jun  5 10:42:39 hayes-01 kernel: EXT3-fs: dm-0: orphan cleanup on readonly fs
>Jun  5 10:42:39 hayes-01 kernel: EXT3-fs: dm-0: 2 orphan inodes deleted
>Jun  5 10:42:39 hayes-01 kernel: EXT3-fs: recovery complete.
>Jun  5 10:42:39 hayes-01 kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Jun  5 10:42:39 hayes-01 kernel: SELinux:  Disabled at runtime.
>Jun  5 10:42:39 hayes-01 kernel: audit(1212680541.910:2): selinux=0 auid=4294967295 ses=4294967295
>Jun  5 10:42:39 hayes-01 kernel: input: PC Speaker as /class/input/input0
>Jun  5 10:42:39 hayes-01 kernel: tg3.c:v3.86 (November 9, 2007)
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 33 (level, low) -> IRQ 177
>Jun  5 10:42:39 hayes-01 kernel: eth0: Tigon3 [partno(BCM95721) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:1d:09:03:c8:f0
>Jun  5 10:42:39 hayes-01 kernel: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
>Jun  5 10:42:39 hayes-01 kernel: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>Jun  5 10:42:39 hayes-01 kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 37 (level, low) -> IRQ 185
>Jun  5 10:42:39 hayes-01 kernel: eth1: Tigon3 [partno(BCM95721) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:1d:09:03:c8:f1
>Jun  5 10:42:39 hayes-01 kernel: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
>Jun  5 10:42:39 hayes-01 kernel: eth1: dma_rwctrl[76180000] dma_mask[64-bit]
>Jun  5 10:42:39 hayes-01 kernel: EDAC MC: Ver: 2.0.1 Apr 29 2008
>Jun  5 10:42:39 hayes-01 kernel: EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>Jun  5 10:42:39 hayes-01 kernel: EDAC MC1: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:19.2
>Jun  5 10:42:39 hayes-01 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Jun  5 10:42:39 hayes-01 kernel: hda: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
>Jun  5 10:42:39 hayes-01 kernel: Uniform CD-ROM driver Revision: 3.20
>Jun  5 10:42:39 hayes-01 kernel: piix4_smbus 0000:00:02.0: Found 0000:00:02.0 device
>Jun  5 10:42:39 hayes-01 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
>Jun  5 10:42:39 hayes-01 kernel: floppy0: no floppy controllers found
>Jun  5 10:42:39 hayes-01 kernel: lp: driver loaded but no devices found
>Jun  5 10:42:39 hayes-01 kernel: ACPI: Power Button (FF) [PWRF]
>Jun  5 10:42:39 hayes-01 kernel: ibm_acpi: ec object not found
>Jun  5 10:42:39 hayes-01 kernel: md: Autodetecting RAID arrays.
>Jun  5 10:42:39 hayes-01 kernel: md: autorun ...
>Jun  5 10:42:39 hayes-01 kernel: md: ... autorun DONE.
>Jun  5 10:42:39 hayes-01 kernel: device-mapper: multipath: version 1.0.5 loaded
>Jun  5 10:42:39 hayes-01 kernel: EXT3 FS on dm-0, internal journal
>Jun  5 10:42:39 hayes-01 kernel: kjournald starting.  Commit interval 5 seconds
>Jun  5 10:42:39 hayes-01 kernel: EXT3 FS on sda1, internal journal
>Jun  5 10:42:39 hayes-01 kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Jun  5 10:42:39 hayes-01 kernel: Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
>Jun  5 10:42:39 hayes-01 kernel: NET: Registered protocol family 10
>Jun  5 10:42:39 hayes-01 kernel: lo: Disabled Privacy Extensions
>Jun  5 10:42:39 hayes-01 kernel: IPv6 over IPv4 tunneling driver
>Jun  5 10:42:39 hayes-01 kernel: process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
>Jun  5 10:42:39 hayes-01 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
>Jun  5 10:42:39 hayes-01 kernel: tg3: eth0: Link is up at 1000 Mbps, full duplex.
>Jun  5 10:42:39 hayes-01 kernel: tg3: eth0: Flow control is off for TX and off for RX.
>Jun  5 10:42:39 hayes-01 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>Jun  5 10:42:39 hayes-01 kernel: ADDRCONF(NETDEV_UP): eth1: link is not ready
>Jun  5 10:42:39 hayes-01 kernel: Bluetooth: Core ver 2.10
>Jun  5 10:42:39 hayes-01 kernel: NET: Registered protocol family 31
>Jun  5 10:42:39 hayes-01 kernel: Bluetooth: HCI device and connection manager initialized
>Jun  5 10:42:39 hayes-01 kernel: Bluetooth: HCI socket layer initialized
>Jun  5 10:42:39 hayes-01 kernel: Bluetooth: L2CAP ver 2.8
>Jun  5 10:42:39 hayes-01 kernel: Bluetooth: L2CAP socket layer initialized
>Jun  5 10:42:40 hayes-01 kernel: Bluetooth: RFCOMM socket layer initialized
>Jun  5 10:42:40 hayes-01 kernel: Bluetooth: RFCOMM TTY layer initialized
>Jun  5 10:42:40 hayes-01 kernel: Bluetooth: RFCOMM ver 1.8
>Jun  5 10:42:40 hayes-01 pcscd: pcscdaemon.c:507:main() pcsc-lite 1.4.4 daemon ready.
>Jun  5 10:42:40 hayes-01 pcscd: hotplug_libusb.c:402:HPEstablishUSBNotifications() Driver ifd-ccid.bundle does not support IFD_GENERATE_HOTPLUG. Using active polling instead.
>Jun  5 10:42:40 hayes-01 pcscd: hotplug_libusb.c:411:HPEstablishUSBNotifications() Polling forced every 1 second(s)
>Jun  5 10:42:40 hayes-01 kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>Jun  5 10:42:40 hayes-01 hidd[2656]: Bluetooth HID daemon
>Jun  5 10:42:40 hayes-01 automount[2673]: lookup_read_master: lookup(nisplus): couldn't locate nis+ table auto.master
>Jun  5 10:42:41 hayes-01 kernel: tg3: eth1: Link is up at 1000 Mbps, full duplex.
>Jun  5 10:42:41 hayes-01 kernel: tg3: eth1: Flow control is off for TX and off for RX.
>Jun  5 10:42:41 hayes-01 kernel: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>Jun  5 10:42:41 hayes-01 xinetd[2725]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in.
>Jun  5 10:42:41 hayes-01 xinetd[2725]: Started working: 2 available services
>Jun  5 10:42:41 hayes-01 gpm[2763]: *** info [startup.c(95)]: 
>Jun  5 10:42:41 hayes-01 gpm[2763]: Started gpm successfully. Entered daemon mode.
>Jun  5 10:42:41 hayes-01 avahi-daemon[2856]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
>Jun  5 10:42:41 hayes-01 avahi-daemon[2856]: Successfully dropped root privileges.
>Jun  5 10:42:41 hayes-01 avahi-daemon[2856]: avahi-daemon 0.6.16 starting up.
>Jun  5 10:42:41 hayes-01 avahi-daemon[2856]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
>Jun  5 10:42:41 hayes-01 avahi-daemon[2856]: Successfully called chroot().
>Jun  5 10:42:41 hayes-01 avahi-daemon[2856]: Successfully dropped remaining capabilities.
>Jun  5 10:42:41 hayes-01 avahi-daemon[2856]: Loading service file /services/sftp-ssh.service.
>Jun  5 10:42:41 hayes-01 avahi-daemon[2856]: New relevant interface eth1.IPv6 for mDNS.
>Jun  5 10:42:41 hayes-01 avahi-daemon[2856]: Joining mDNS multicast group on interface eth1.IPv6 with address fe80::21d:9ff:fe03:c8f1.
>Jun  5 10:42:41 hayes-01 avahi-daemon[2856]: New relevant interface eth0.IPv6 for mDNS.
>Jun  5 10:42:41 hayes-01 avahi-daemon[2856]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::21d:9ff:fe03:c8f0.
>Jun  5 10:42:41 hayes-01 avahi-daemon[2856]: New relevant interface eth0.IPv4 for mDNS.
>Jun  5 10:42:41 hayes-01 avahi-daemon[2856]: Joining mDNS multicast group on interface eth0.IPv4 with address 10.15.89.135.
>Jun  5 10:42:41 hayes-01 avahi-daemon[2856]: Network interface enumeration completed.
>Jun  5 10:42:41 hayes-01 avahi-daemon[2856]: Registering new address record for fe80::21d:9ff:fe03:c8f1 on eth1.
>Jun  5 10:42:41 hayes-01 avahi-daemon[2856]: Registering new address record for fe80::21d:9ff:fe03:c8f0 on eth0.
>Jun  5 10:42:41 hayes-01 avahi-daemon[2856]: Registering new address record for 10.15.89.135 on eth0.
>Jun  5 10:42:41 hayes-01 avahi-daemon[2856]: Registering HINFO record with values 'X86_64'/'LINUX'.
>Jun  5 10:42:42 hayes-01 avahi-daemon[2856]: Server startup complete. Host name is hayes-01.local. Local service cookie is 3832686472.
>Jun  5 10:42:43 hayes-01 avahi-daemon[2856]: Service "SFTP File Transfer on hayes-01" (/services/sftp-ssh.service) successfully established.
>Jun  5 10:42:44 hayes-01 smartd[2915]: smartd version 5.36 [x86_64-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen 
>Jun  5 10:42:44 hayes-01 smartd[2915]: Home page is http://smartmontools.sourceforge.net/  
>Jun  5 10:42:44 hayes-01 smartd[2915]: Opened configuration file /etc/smartd.conf 
>Jun  5 10:42:44 hayes-01 smartd[2915]: Configuration file /etc/smartd.conf parsed. 
>Jun  5 10:42:44 hayes-01 smartd[2915]: Device: /dev/sda, opened 
>Jun  5 10:42:44 hayes-01 smartd[2915]: Device: /dev/sda, found in smartd database. 
>Jun  5 10:42:44 hayes-01 smartd[2915]: Device: /dev/sda, is SMART capable. Adding to "monitor" list. 
>Jun  5 10:42:44 hayes-01 smartd[2915]: Monitoring 1 ATA and 0 SCSI devices 
>Jun  5 10:42:44 hayes-01 smartd[2917]: smartd has fork()ed into background mode. New PID=2917. 
>Jun  5 10:42:59 hayes-01 xinetd[2725]: START: qarsh pid=2993 from=10.15.80.47
>Jun  5 10:42:59 hayes-01 qarshd[2993]: Talking to peer 10.15.80.47:51992
>Jun  5 10:42:59 hayes-01 qarshd[2993]: Running cmdline: true 
>Jun  5 10:42:59 hayes-01 xinetd[2725]: START: btimed pid=2995 from=10.15.80.47
>Jun  5 10:42:59 hayes-01 btimed[2995]: started with btime = 1208386515
>Jun  5 10:42:59 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=2993 duration=0(sec)
>Jun  5 10:42:59 hayes-01 xinetd[2725]: START: qarsh pid=2996 from=10.15.80.47
>Jun  5 10:42:59 hayes-01 qarshd[2996]: Talking to peer 10.15.80.47:51993
>Jun  5 10:42:59 hayes-01 qarshd[2996]: Running cmdline: modprobe scsi_mod 2>&1 
>Jun  5 10:42:59 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=2996 duration=0(sec)
>Jun  5 10:42:59 hayes-01 xinetd[2725]: START: qarsh pid=2999 from=10.15.80.47
>Jun  5 10:42:59 hayes-01 qarshd[2999]: Talking to peer 10.15.80.47:51994
>Jun  5 10:42:59 hayes-01 qarshd[2999]: Running cmdline: modprobe sd_mod 2>&1 
>Jun  5 10:42:59 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=2999 duration=0(sec)
>Jun  5 10:42:59 hayes-01 xinetd[2725]: START: qarsh pid=3002 from=10.15.80.47
>Jun  5 10:42:59 hayes-01 qarshd[3002]: Talking to peer 10.15.80.47:51995
>Jun  5 10:42:59 hayes-01 qarshd[3002]: Running cmdline: modprobe dm-mod 2>&1 
>Jun  5 10:42:59 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=3002 duration=0(sec)
>Jun  5 10:42:59 hayes-01 xinetd[2725]: START: qarsh pid=3005 from=10.15.80.47
>Jun  5 10:42:59 hayes-01 qarshd[3005]: Talking to peer 10.15.80.47:51996
>Jun  5 10:42:59 hayes-01 qarshd[3005]: Running cmdline: modprobe aoe 2>&1 
>Jun  5 10:42:59 hayes-01 kernel: aoe: aoe_init: AoE v22 initialised.
>Jun  5 10:42:59 hayes-01 kernel: aoe: 0030488d63d3 e1.1 v4467 has 19046937725 sectors
>Jun  5 10:42:59 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=3005 duration=0(sec)
>Jun  5 10:42:59 hayes-01 xinetd[2725]: START: qarsh pid=3023 from=10.15.80.47
>Jun  5 10:42:59 hayes-01 qarshd[3023]: Talking to peer 10.15.80.47:51997
>Jun  5 10:42:59 hayes-01 qarshd[3023]: Running cmdline: modprobe configfs 2>&1 
>Jun  5 10:42:59 hayes-01 kernel:  etherd/e1.1: p1
>Jun  5 10:42:59 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=3023 duration=0(sec)
>Jun  5 10:42:59 hayes-01 xinetd[2725]: START: qarsh pid=3036 from=10.15.80.47
>Jun  5 10:42:59 hayes-01 qarshd[3036]: Talking to peer 10.15.80.47:51998
>Jun  5 10:42:59 hayes-01 qarshd[3036]: Running cmdline: modprobe dlm 2>&1 
>Jun  5 10:42:59 hayes-01 kernel: DLM (built Apr 29 2008 13:16:47) installed
>Jun  5 10:42:59 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=3036 duration=0(sec)
>Jun  5 10:42:59 hayes-01 xinetd[2725]: START: qarsh pid=3046 from=10.15.80.47
>Jun  5 10:42:59 hayes-01 qarshd[3046]: Talking to peer 10.15.80.47:51999
>Jun  5 10:42:59 hayes-01 qarshd[3046]: Running cmdline: modprobe lock_dlm 2>&1 
>Jun  5 10:42:59 hayes-01 kernel: GFS2 (built Apr 29 2008 13:17:12) installed
>Jun  5 10:42:59 hayes-01 kernel: Lock_DLM (built Apr 29 2008 13:17:18) installed
>Jun  5 10:42:59 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=3046 duration=0(sec)
>Jun  5 10:42:59 hayes-01 xinetd[2725]: START: qarsh pid=3072 from=10.15.80.47
>Jun  5 10:42:59 hayes-01 qarshd[3072]: Talking to peer 10.15.80.47:52000
>Jun  5 10:42:59 hayes-01 qarshd[3072]: Running cmdline: modprobe gfs 2>&1 
>Jun  5 10:42:59 hayes-01 kernel: GFS 0.1.23-5.el5 (built Apr 30 2008 16:56:42) installed
>Jun  5 10:42:59 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=3072 duration=0(sec)
>Jun  5 10:42:59 hayes-01 xinetd[2725]: START: qarsh pid=3085 from=10.15.80.47
>Jun  5 10:42:59 hayes-01 qarshd[3085]: Talking to peer 10.15.80.47:52001
>Jun  5 10:42:59 hayes-01 qarshd[3085]: Running cmdline: modprobe lock_nolock 2>&1 
>Jun  5 10:42:59 hayes-01 kernel: Lock_Nolock (built Apr 29 2008 13:17:20) installed
>Jun  5 10:42:59 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=3085 duration=0(sec)
>Jun  5 10:42:59 hayes-01 xinetd[2725]: START: qarsh pid=3093 from=10.15.80.47
>Jun  5 10:42:59 hayes-01 qarshd[3093]: Talking to peer 10.15.80.47:52002
>Jun  5 10:42:59 hayes-01 qarshd[3093]: Running cmdline: modprobe gnbd 2>&1 
>Jun  5 10:42:59 hayes-01 kernel: gnbd: registered device at major 252
>Jun  5 10:42:59 hayes-01 qarshd[3446]: Talking to peer 10.15.80.47:52003
>Jun  5 10:42:59 hayes-01 xinetd[2725]: START: qarsh pid=3446 from=10.15.80.47
>Jun  5 10:42:59 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=3093 duration=0(sec)
>Jun  5 10:42:59 hayes-01 qarshd[3446]: Running cmdline: mount | grep configfs 
>Jun  5 10:42:59 hayes-01 xinetd[2725]: START: qarsh pid=3808 from=10.15.80.47
>Jun  5 10:42:59 hayes-01 qarshd[3808]: Talking to peer 10.15.80.47:52004
>Jun  5 10:42:59 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=3446 duration=0(sec)
>Jun  5 10:42:59 hayes-01 qarshd[3808]: Running cmdline: /bin/mount -t configfs none /sys/kernel/config 
>Jun  5 10:42:59 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=3808 duration=0(sec)
>Jun  5 10:42:59 hayes-01 xinetd[2725]: START: qarsh pid=3909 from=10.15.80.47
>Jun  5 10:42:59 hayes-01 qarshd[3909]: Talking to peer 10.15.80.47:52005
>Jun  5 10:42:59 hayes-01 qarshd[3909]: Running cmdline: pidof ccsd 2>&1 
>Jun  5 10:43:00 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=3909 duration=1(sec)
>Jun  5 10:43:00 hayes-01 qarshd[4428]: Talking to peer 10.15.80.47:52006
>Jun  5 10:43:00 hayes-01 xinetd[2725]: START: qarsh pid=4428 from=10.15.80.47
>Jun  5 10:43:00 hayes-01 qarshd[4428]: Running cmdline: netstat -tnlp | grep 5000 
>Jun  5 10:43:00 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=4428 duration=0(sec)
>Jun  5 10:43:00 hayes-01 xinetd[2725]: START: qarsh pid=4507 from=10.15.80.47
>Jun  5 10:43:00 hayes-01 qarshd[4507]: Talking to peer 10.15.80.47:52007
>Jun  5 10:43:00 hayes-01 qarshd[4507]: Running cmdline: netstat -tnlp | grep ccsd 
>Jun  5 10:43:00 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=4507 duration=0(sec)
>Jun  5 10:43:00 hayes-01 xinetd[2725]: START: qarsh pid=4532 from=10.15.80.47
>Jun  5 10:43:00 hayes-01 qarshd[4532]: Talking to peer 10.15.80.47:52008
>Jun  5 10:43:00 hayes-01 qarshd[4532]: Running cmdline: ccsd 2>&1 
>Jun  5 10:43:00 hayes-01 ccsd[4549]: Starting ccsd 2.0.84: 
>Jun  5 10:43:00 hayes-01 ccsd[4549]:  Built: Apr 15 2008 16:19:15 
>Jun  5 10:43:00 hayes-01 ccsd[4549]:  Copyright (C) Red Hat, Inc.  2004  All rights reserved. 
>Jun  5 10:43:00 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=4532 duration=0(sec)
>Jun  5 10:43:00 hayes-01 xinetd[2725]: START: qarsh pid=4554 from=10.15.80.47
>Jun  5 10:43:00 hayes-01 qarshd[4554]: Talking to peer 10.15.80.47:52009
>Jun  5 10:43:00 hayes-01 qarshd[4554]: Running cmdline: cman_tool join 2>&1 
>Jun  5 10:43:00 hayes-01 ccsd[4549]: cluster.conf (cluster name = HAYES, version = 2) found. 
>Jun  5 10:43:00 hayes-01 ccsd[4549]: Remote copy of cluster.conf is from quorate node. 
>Jun  5 10:43:00 hayes-01 ccsd[4549]:  Local version # : 2 
>Jun  5 10:43:00 hayes-01 ccsd[4549]:  Remote version #: 2 
>Jun  5 10:43:00 hayes-01 ccsd[4549]: Remote copy of cluster.conf is from quorate node. 
>Jun  5 10:43:00 hayes-01 ccsd[4549]:  Local version # : 2 
>Jun  5 10:43:00 hayes-01 ccsd[4549]:  Remote version #: 2 
>Jun  5 10:43:00 hayes-01 ccsd[4549]: Remote copy of cluster.conf is from quorate node. 
>Jun  5 10:43:00 hayes-01 ccsd[4549]:  Local version # : 2 
>Jun  5 10:43:00 hayes-01 ccsd[4549]:  Remote version #: 2 
>Jun  5 10:43:00 hayes-01 ccsd[4549]: Remote copy of cluster.conf is from quorate node. 
>Jun  5 10:43:00 hayes-01 ccsd[4549]:  Local version # : 2 
>Jun  5 10:43:00 hayes-01 ccsd[4549]:  Remote version #: 2 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] AIS Executive Service RELEASE 'subrev 1358 version 0.80.3' 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] Copyright (C) 2002-2006 MontaVista Software, Inc and contributors. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] Copyright (C) 2006 Red Hat, Inc. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] AIS Executive Service: started and ready to provide service. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] Using default multicast address of 239.192.8.209 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] openais component openais_cpg loaded. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] Registering service handler 'openais cluster closed process group service v1.01' 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] openais component openais_cfg loaded. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] Registering service handler 'openais configuration service' 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] openais component openais_msg loaded. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] Registering service handler 'openais message service B.01.01' 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] openais component openais_lck loaded. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] Registering service handler 'openais distributed locking service B.01.01' 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] openais component openais_evt loaded. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] Registering service handler 'openais event service B.01.01' 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] openais component openais_ckpt loaded. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] Registering service handler 'openais checkpoint service B.01.01' 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] openais component openais_amf loaded. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] Registering service handler 'openais availability management framework B.01.01' 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] openais component openais_clm loaded. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] Registering service handler 'openais cluster membership service B.01.01' 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] openais component openais_evs loaded. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] Registering service handler 'openais extended virtual synchrony service' 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] openais component openais_cman loaded. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [MAIN ] Registering service handler 'openais CMAN membership service 2.01' 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] Token Timeout (10000 ms) retransmit timeout (495 ms) 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] token hold (386 ms) retransmits before loss (20 retrans) 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] join (60 ms) send_join (0 ms) consensus (4800 ms) merge (200 ms) 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] downcheck (1000 ms) fail to recv const (50 msgs) 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] seqno unchanged const (30 rotations) Maximum network MTU 1500 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] window size per rotation (50 messages) maximum messages per rotation (17 messages) 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] send threads (0 threads) 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] RRP token expired timeout (495 ms) 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] RRP token problem counter (2000 ms) 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] RRP threshold (10 problem count) 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] RRP mode set to none. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] heartbeat_failures_allowed (0) 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] max_network_delay (50 ms) 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] HeartBeat is Disabled. To enable set heartbeat_failures_allowed > 0 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] Receive multicast socket recv buffer size (262142 bytes). 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] Transmit multicast socket send buffer size (262142 bytes). 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] The network interface [10.15.89.135] is now up. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] Created or loaded sequence id 496.10.15.89.135 for this ring. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] entering GATHER state from 15. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [SERV ] Initialising service handler 'openais extended virtual synchrony service' 
>Jun  5 10:43:00 hayes-01 openais[4560]: [SERV ] Initialising service handler 'openais cluster membership service B.01.01' 
>Jun  5 10:43:00 hayes-01 openais[4560]: [SERV ] Initialising service handler 'openais availability management framework B.01.01' 
>Jun  5 10:43:00 hayes-01 openais[4560]: [SERV ] Initialising service handler 'openais checkpoint service B.01.01' 
>Jun  5 10:43:00 hayes-01 openais[4560]: [SERV ] Initialising service handler 'openais event service B.01.01' 
>Jun  5 10:43:00 hayes-01 openais[4560]: [SERV ] Initialising service handler 'openais distributed locking service B.01.01' 
>Jun  5 10:43:00 hayes-01 openais[4560]: [SERV ] Initialising service handler 'openais message service B.01.01' 
>Jun  5 10:43:00 hayes-01 openais[4560]: [SERV ] Initialising service handler 'openais configuration service' 
>Jun  5 10:43:00 hayes-01 openais[4560]: [SERV ] Initialising service handler 'openais cluster closed process group service v1.01' 
>Jun  5 10:43:00 hayes-01 openais[4560]: [SERV ] Initialising service handler 'openais CMAN membership service 2.01' 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CMAN ] CMAN 2.0.84 (built Apr 15 2008 16:19:19) started 
>Jun  5 10:43:00 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=4554 duration=0(sec)
>Jun  5 10:43:00 hayes-01 openais[4560]: [SYNC ] Not using a virtual synchrony filter. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] Creating commit token because I am the rep. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] Saving state aru 0 high seq received 0 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] Storing new sequence id for ring 1f4 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] entering COMMIT state. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] entering RECOVERY state. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] position [0] member 10.15.89.135: 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] previous ring seq 496 rep 10.15.89.135 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] aru 0 high delivered 0 received flag 1 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] Did not need to originate any messages in recovery. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] Sending initial ORF token 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] CLM CONFIGURATION CHANGE 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] New Configuration: 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] Members Left: 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] Members Joined: 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] CLM CONFIGURATION CHANGE 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] New Configuration: 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] 	r(0) ip(10.15.89.135)  
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] Members Left: 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] Members Joined: 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] 	r(0) ip(10.15.89.135)  
>Jun  5 10:43:00 hayes-01 openais[4560]: [SYNC ] This node is within the primary component and will provide service. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] entering OPERATIONAL state. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] got nodejoin message 10.15.89.135 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] entering GATHER state from 11. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] Creating commit token because I am the rep. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] Saving state aru a high seq received a 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] Storing new sequence id for ring 1f8 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] entering COMMIT state. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] entering RECOVERY state. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] position [0] member 10.15.89.135: 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] previous ring seq 500 rep 10.15.89.135 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] aru a high delivered a received flag 1 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] position [1] member 10.15.89.136: 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] previous ring seq 500 rep 10.15.89.136 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] aru 3a high delivered 3a received flag 1 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] position [2] member 10.15.89.137: 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] previous ring seq 500 rep 10.15.89.136 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] aru 3a high delivered 3a received flag 1 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] Did not need to originate any messages in recovery. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] Sending initial ORF token 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] CLM CONFIGURATION CHANGE 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] New Configuration: 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] 	r(0) ip(10.15.89.135)  
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] Members Left: 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] Members Joined: 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] CLM CONFIGURATION CHANGE 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] New Configuration: 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] 	r(0) ip(10.15.89.135)  
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] 	r(0) ip(10.15.89.136)  
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] 	r(0) ip(10.15.89.137)  
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] Members Left: 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] Members Joined: 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] 	r(0) ip(10.15.89.136)  
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] 	r(0) ip(10.15.89.137)  
>Jun  5 10:43:00 hayes-01 openais[4560]: [SYNC ] This node is within the primary component and will provide service. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [TOTEM] entering OPERATIONAL state. 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CMAN ] quorum regained, resuming activity 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] got nodejoin message 10.15.89.135 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] got nodejoin message 10.15.89.136 
>Jun  5 10:43:00 hayes-01 openais[4560]: [CLM  ] got nodejoin message 10.15.89.137 
>Jun  5 10:43:04 hayes-01 xinetd[2725]: START: qarsh pid=4563 from=10.15.80.47
>Jun  5 10:43:04 hayes-01 qarshd[4563]: Talking to peer 10.15.80.47:52010
>Jun  5 10:43:04 hayes-01 qarshd[4563]: Running cmdline: cman_tool status 
>Jun  5 10:43:04 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=4563 duration=0(sec)
>Jun  5 10:43:08 hayes-01 xinetd[2725]: START: qarsh pid=4565 from=10.15.80.47
>Jun  5 10:43:08 hayes-01 qarshd[4565]: Talking to peer 10.15.80.47:52011
>Jun  5 10:43:08 hayes-01 qarshd[4565]: Running cmdline: cman_tool status 
>Jun  5 10:43:08 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=4565 duration=0(sec)
>Jun  5 10:43:12 hayes-01 xinetd[2725]: START: qarsh pid=4567 from=10.15.80.47
>Jun  5 10:43:12 hayes-01 qarshd[4567]: Talking to peer 10.15.80.47:52012
>Jun  5 10:43:12 hayes-01 qarshd[4567]: Running cmdline: cman_tool status 
>Jun  5 10:43:12 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=4567 duration=0(sec)
>Jun  5 10:43:16 hayes-01 xinetd[2725]: START: qarsh pid=4569 from=10.15.80.47
>Jun  5 10:43:16 hayes-01 qarshd[4569]: Talking to peer 10.15.80.47:52013
>Jun  5 10:43:16 hayes-01 qarshd[4569]: Running cmdline: cman_tool status 
>Jun  5 10:43:16 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=4569 duration=0(sec)
>Jun  5 10:43:20 hayes-01 xinetd[2725]: START: qarsh pid=4571 from=10.15.80.47
>Jun  5 10:43:20 hayes-01 qarshd[4571]: Talking to peer 10.15.80.47:52014
>Jun  5 10:43:20 hayes-01 qarshd[4571]: Running cmdline: cman_tool status 
>Jun  5 10:43:20 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=4571 duration=0(sec)
>Jun  5 10:43:24 hayes-01 xinetd[2725]: START: qarsh pid=4573 from=10.15.80.47
>Jun  5 10:43:24 hayes-01 qarshd[4573]: Talking to peer 10.15.80.47:52015
>Jun  5 10:43:24 hayes-01 qarshd[4573]: Running cmdline: cman_tool status 
>Jun  5 10:43:24 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=4573 duration=0(sec)
>Jun  5 10:43:28 hayes-01 xinetd[2725]: START: qarsh pid=4575 from=10.15.80.47
>Jun  5 10:43:28 hayes-01 qarshd[4575]: Talking to peer 10.15.80.47:52026
>Jun  5 10:43:28 hayes-01 qarshd[4575]: Running cmdline: cman_tool status 
>Jun  5 10:43:28 hayes-01 xinetd[2725]: EXIT: qarsh status=0 pid=4575 duration=0(sec)
>Jun  5 10:43:29 hayes-01 ccsd[4549]: Unable to connect to cluster infrastructure after 30 seconds. 
>Jun  5 10:43:59 hayes-01 ccsd[4549]: Unable to connect to cluster infrastructure after 60 seconds. 
>Jun  5 10:44:29 hayes-01 ccsd[4549]: Unable to connect to cluster infrastructure after 90 seconds.

Actions: View

Attachments on bug 450161: 308449 | 308450 | 308452