Attachment 308479 Details for Bug 450191 – dmesg output with the problem

dmesg output with the problem

dm1 (text/plain), 25.08 KB, created by James on 2008-06-05 19:36:05 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: James

Created: 2008-06-05 19:36:05 UTC

Size: 25.08 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.25.4-29.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Tue May 20 06:27:23 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
> BIOS-e820: 000000001ff70000 - 000000001ff7d000 (ACPI data)
> BIOS-e820: 000000001ff7d000 - 000000001ff80000 (ACPI NVS)
> BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
> BIOS-e820: 000000002ff80000 - 0000000030000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>found SMP MP-table at [c00f6470] 000f6470
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 130928) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   130928
>  HighMem    130928 ->   130928
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   130928
>On node 0 totalpages: 130928
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 990 pages used for memmap
>  Normal zone: 125842 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F6500, 0014 (r0 PTLTD )
>ACPI: RSDT 1FF791CE, 002C (r1 PTLTD    RSDT    6040000  LTP        0)
>ACPI: FACP 1FF7CF32, 0074 (r1 HP     Chinook   6040000 ATI     F4240)
>ACPI: DSDT 1FF791FA, 3D38 (r1     HP    SB200  6040000 INTL 20030509)
>ACPI: FACS 1FF7FFC0, 0040
>ACPI: APIC 1FF7CFA6, 005A (r1 PTLTD  	 APIC    6040000  LTP        0)
>ACPI: DMI detected: Hewlett-Packard
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
>PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000
>PM: Registered nosave memory: 00000000000d8000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129906
>Kernel command line: ro root=UUID=e1073d84-c373-4cfd-810d-7741a02b7f6e quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07b8000 soft=c0798000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 2800.135 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 510732k/523712k available (2233k kernel code, 12352k reserved, 1120k data, 284k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xe0800000 - 0xff3fe000   ( 491 MB)
>    lowmem  : 0xc0000000 - 0xdff70000   ( 511 MB)
>      .init : 0xc074e000 - 0xc0795000   ( 284 kB)
>      .data : 0xc062e7b5 - 0xc0746800   (1120 kB)
>      .text : 0xc0400000 - 0xc062e7b5   (2233 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=128, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 5602.74 BogoMIPS (lpj=2801371)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Hyper-Threading is disabled
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 20k freed
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
>Total of 1 processors activated (5602.74 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>..MP-BIOS bug: 8254 timer not connected to IO-APIC
>...trying to set up timer (IRQ0) through the 8259A ...  failed.
>...trying to set up timer as Virtual Wire IRQ... works.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=3696 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 19:03:36  Date: 06/05/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd968, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Link [LNK0] (IRQs 5 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 10 11) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>system 00:07: ioport range 0x200-0x20f has been reserved
>system 00:07: ioport range 0xc14-0xc14 has been reserved
>system 00:07: ioport range 0xc50-0xc52 has been reserved
>system 00:07: ioport range 0xc6c-0xc6c has been reserved
>system 00:07: ioport range 0xc6f-0xc6f has been reserved
>system 00:07: ioport range 0xcd6-0xcd7 has been reserved
>system 00:07: ioport range 0x1080-0x1080 has been reserved
>system 00:07: ioport range 0x8000-0x803f has been reserved
>system 00:07: ioport range 0x8800-0x8800 has been reserved
>system 00:07: ioport range 0xfe00-0xfe00 has been reserved
>system 00:07: ioport range 0xfe10-0xfe11 has been reserved
>system 00:07: iomem range 0xe4000-0xfffff could not be reserved
>system 00:07: iomem range 0x100000-0x1fffffff could not be reserved
>system 00:07: iomem range 0xe8000000-0xe8000fff has been reserved
>system 00:07: iomem range 0xfff80000-0xffffffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: 0xe8100000-0xe81fffff
>  PREFETCH window: 0x00000000f0000000-0x00000000f7ffffff
>PCI: Bus 3, cardbus bridge: 0000:02:04.0
>  IO window: 0x0000a800-0x0000a8ff
>  IO window: 0x0000ac00-0x0000acff
>  PREFETCH window: 0x40000000-0x43ffffff
>  MEM window: 0x4c000000-0x4fffffff
>PCI: Bus 4, cardbus bridge: 0000:02:04.1
>  IO window: 0x00001400-0x000014ff
>  IO window: 0x00001800-0x000018ff
>  PREFETCH window: 0x44000000-0x47ffffff
>  MEM window: 0x50000000-0x53ffffff
>PCI: Bridge: 0000:00:14.4
>  IO window: a000-afff
>  MEM window: 0xe8200000-0xe82fffff
>  PREFETCH window: 0x0000000040000000-0x0000000047ffffff
>ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 17 (level, low) -> IRQ 17
>ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3276k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1212692615.499:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:05.0: Boot video device
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (33 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected Ati IGP9100/M chipset
>agpgart: AGP aperture is 32M @ 0xea000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 5 (level, low) -> IRQ 5
>ACPI: PCI interrupt for device 0000:00:14.6 disabled
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>Yenta: CardBus bridge found at 0000:02:04.0 [103c:006b]
>Yenta: Enabling burst memory read transactions
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:04.0, mfunc 0x01111d22, devctl 0x64
>Yenta: ISA IRQ mask 0x0ed8, PCI irq 17
>Socket status: 30000086
>pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
>cs: IO port probe 0xa000-0xafff: clean.
>pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe82fffff
>pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
>Yenta: CardBus bridge found at 0000:02:04.1 [103c:006b]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:04.1, mfunc 0x01111d22, devctl 0x64
>Yenta: ISA IRQ mask 0x0ed8, PCI irq 16
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #04 to #07
>pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
>cs: IO port probe 0xa000-0xafff: clean.
>pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe82fffff
>pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one day
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 12:901:90
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 908k
>Marking TSC unstable due to: TSC halts in idle.
>ACPI: PCI Interrupt 0000:02:07.2[C] -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:02:07.2: EHCI Host Controller
>ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:02:07.2: irq 19, io mem 0xe8208c00
>ehci_hcd 0000:02:07.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 5 ports detected
>input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input2
>input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input3
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25.4-29.fc9.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:02:07.2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 19, io mem 0xe8001000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25.4-29.fc9.i686 ohci_hcd
>usb usb2: SerialNumber: 0000:00:13.0
>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 19, io mem 0xe8002000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25.4-29.fc9.i686 ohci_hcd
>usb usb3: SerialNumber: 0000:00:13.1
>ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:02:07.0: OHCI Host Controller
>ohci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:02:07.0: irq 16, io mem 0xe8206000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 3 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25.4-29.fc9.i686 ohci_hcd
>usb usb4: SerialNumber: 0000:02:07.0
>ACPI: PCI Interrupt 0000:02:07.1[B] -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:02:07.1: OHCI Host Controller
>ohci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:02:07.1: irq 18, io mem 0xe8207000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 3-1: new full speed USB device using ohci_hcd and address 2
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: OHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25.4-29.fc9.i686 ohci_hcd
>usb usb5: SerialNumber: 0000:02:07.1
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI interrupt for device 0000:00:14.1 disabled
>usb 3-1: configuration #1 chosen from 1 choice
>usb 3-1: New USB device found, idVendor=058f, idProduct=9330
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1: Product: Mass Storage Device
>usb 3-1: Manufacturer: Alcor Micro
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
>scsi0 : pata_atiixp
>scsi1 : pata_atiixp
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8060 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8068 irq 15
>ata1.00: ATA-6: IC25N060ATMR04-0, MO3OAD0A, max UDMA/100
>ata1.00: 117210240 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4241N, 0C29, max MWDMA2
>ata2.00: simplex DMA is claimed by other device, disabling DMA
>ata2.00: configured for PIO4
>scsi 0:0:0:0: Direct-Access     ATA      IC25N060ATMR04-0 MO3O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4241N 0C29 PQ: 0 ANSI: 5
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>scsi 2:0:0:0: Direct-Access     Generic  USB SD Reader    2.00 PQ: 0 ANSI: 0
>sd 2:0:0:0: [sdb] Attached SCSI removable disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1212692632.041:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux:8192 avtab hash slots allocated. Num of rules:167099
>SELinux:8192 avtab hash slots allocated. Num of rules:167099
>security:  8 users, 12 roles, 2308 types, 113 bools, 1 sens, 1024 cats
>security:  72 classes, 167099 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1212692633.611:3): policy loaded auid=4294967295 ses=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>input: PC Speaker as /devices/platform/pcspkr/input/input4
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input7
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
>ACPI: Power Button (CM) [PWRB]
>ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 18
>ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
>ACPI: WMI: Mapper loaded
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x4d0-0x4d7
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07
>cs: IO port probe 0xa00-0xaff: clean.
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 19
>eth0: RealTek RTL8139 at 0xe0952800, 00:02:3f:68:15:45, IRQ 19
>eth0:  Identified 8139 chip type 'RTL-8101'
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input8
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>ppdev: user-space parallel port driver
>firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI version 1.10
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>floppy0: no floppy controllers found
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 5 (level, low) -> IRQ 5
>firewire_core: created device fw0: GUID 3b3f0200aa08003d, S400
>ALSA sound/pci/atiixp.c:1432: atiixp: codec 1 not available for audio
>ALSA sound/pci/ac97/ac97_codec.c:2868: ac97 quirk for HP Pavilion ZV5030US (103c:006b)
>ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 5 (level, low) -> IRQ 5
>ALSA sound/pci/atiixp_modem.c:1095: atiixp-modem: codec 0 not available for modem
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>fuse init (API version 7.9)
>SELinux: initialized (dev sda1, type fuseblk), uses genfs_contexts
>Adding 1048568k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:1048568k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 16 (level, low) -> IRQ 16
>[drm] Initialized radeon 1.28.0 20060524 on minor 0
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode
>[drm] Setting GART location based on new memory map
>[drm] Loading R200 Microcode
>[drm] writeback test succeeded in 1 usecs
>eth0: no IPv6 routers present
>hub 1-0:1.0: unable to enumerate USB device on port 1
>usb 4-1: new low speed USB device using ohci_hcd and address 2
>usb 4-1: configuration #1 chosen from 1 choice
>input: Acrox USB & PS/2 Mouse as /devices/pci0000:00/0000:00:14.4/0000:02:07.0/usb4/4-1/4-1:1.0/input/input9
>input,hidraw0: USB HID v1.10 Mouse [Acrox USB & PS/2 Mouse] on usb-0000:02:07.0-1
>usb 4-1: New USB device found, idVendor=0f62, idProduct=1001
>usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-1: Product: USB & PS/2 Mouse
>usb 4-1: Manufacturer: Acrox

Actions: View

Attachments on bug 450191: 308479