Attachment 308515 Details for Bug 450247 – dmesg from machine

dmesg from machine

dmesg.log (text/plain), 38.22 KB, created by Andy Burns on 2008-06-06 07:45:14 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Andy Burns

Created: 2008-06-06 07:45:14 UTC

Size: 38.22 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25.3-18.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Tue May 13 04:54:47 EDT 2008
>Command line: ro root=/dev/VG0/LV0 quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
> BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cf780000 (usable)
> BIOS-e820: 00000000cf780000 - 00000000cf78e000 (ACPI data)
> BIOS-e820: 00000000cf78e000 - 00000000cf7e0000 (ACPI NVS)
> BIOS-e820: 00000000cf7e0000 - 00000000cf800000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
>Entering add_active_range(0, 0, 158) 0 entries of 3200 used
>Entering add_active_range(0, 256, 849792) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 2293760) 2 entries of 3200 used
>end_pfn_map = 2293760
>DMI 2.4 present.
>ACPI: RSDP 000FBCB0, 0014 (r0 ACPIAM)
>ACPI: RSDT CF780000, 0040 (r1 A_M_I_ OEMRSDT   4000828 MSFT       97)
>ACPI: FACP CF780200, 0084 (r2 A_M_I_ OEMFACP   4000828 MSFT       97)
>ACPI: DSDT CF7805C0, 8D10 (r1  A0867 A0867001        1 INTL 20060113)
>ACPI: FACS CF78E000, 0040
>ACPI: APIC CF780390, 006C (r1 A_M_I_ OEMAPIC   4000828 MSFT       97)
>ACPI: MCFG CF780400, 003C (r1 A_M_I_ OEMMCFG   4000828 MSFT       97)
>ACPI: OEMB CF78E040, 0081 (r1 A_M_I_ AMI_OEM   4000828 MSFT       97)
>ACPI: HPET CF7892D0, 0038 (r1 A_M_I_ OEMHPET   4000828 MSFT       97)
>ACPI: GSCI CF78E0D0, 2024 (r1 A_M_I_ GMCHSCI   4000828 MSFT       97)
>ACPI: OSFR CF789310, 00B0 (r1 A_M_I_ OEMOSFR   4000828 MSFT       97)
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000230000000
>Entering add_active_range(0, 0, 158) 0 entries of 3200 used
>Entering add_active_range(0, 256, 849792) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 2293760) 2 entries of 3200 used
>Bootmem setup node 0 0000000000000000-0000000230000000
>  NODE_DATA [0000000000012000 - 0000000000019fff]
>  bootmap [000000000001a000 -  000000000005ffff] pages 46
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-75db3b] TEXT DATA BSS
>early res: 3 [37c89000-37fef12f] RAMDISK
>early res: 4 [9ec00-a0bff] EBDA
>early res: 5 [8000-11fff] PGTABLE
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
> [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
> [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
> [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
> [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
> [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
> [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
> [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
> [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0
> [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0
> [ffffe20003800000-ffffe200039fffff] PMD ->ffff810006e00000 on node 0
> [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810007200000 on node 0
> [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810007600000 on node 0
> [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810007a00000 on node 0
> [ffffe20004000000-ffffe200041fffff] PMD ->ffff810007e00000 on node 0
> [ffffe20004200000-ffffe200043fffff] PMD ->ffff810008200000 on node 0
> [ffffe20004400000-ffffe200045fffff] PMD ->ffff810008600000 on node 0
> [ffffe20004600000-ffffe200047fffff] PMD ->ffff810008a00000 on node 0
> [ffffe20004800000-ffffe200049fffff] PMD ->ffff810008e00000 on node 0
> [ffffe20004a00000-ffffe20004bfffff] PMD ->ffff810009200000 on node 0
> [ffffe20004c00000-ffffe20004dfffff] PMD ->ffff810009600000 on node 0
> [ffffe20004e00000-ffffe20004ffffff] PMD ->ffff810009a00000 on node 0
> [ffffe20005000000-ffffe200051fffff] PMD ->ffff810009e00000 on node 0
> [ffffe20005200000-ffffe200053fffff] PMD ->ffff81000a200000 on node 0
> [ffffe20005400000-ffffe200055fffff] PMD ->ffff81000a600000 on node 0
> [ffffe20005600000-ffffe200057fffff] PMD ->ffff81000aa00000 on node 0
> [ffffe20005800000-ffffe200059fffff] PMD ->ffff81000ae00000 on node 0
> [ffffe20005a00000-ffffe20005bfffff] PMD ->ffff81000b200000 on node 0
> [ffffe20005c00000-ffffe20005dfffff] PMD ->ffff81000b600000 on node 0
> [ffffe20005e00000-ffffe20005ffffff] PMD ->ffff81000ba00000 on node 0
> [ffffe20006000000-ffffe200061fffff] PMD ->ffff81000be00000 on node 0
> [ffffe20006200000-ffffe200063fffff] PMD ->ffff81000c200000 on node 0
> [ffffe20006400000-ffffe200065fffff] PMD ->ffff81000c600000 on node 0
> [ffffe20006600000-ffffe200067fffff] PMD ->ffff81000ca00000 on node 0
> [ffffe20006800000-ffffe200069fffff] PMD ->ffff81000ce00000 on node 0
> [ffffe20006a00000-ffffe20006bfffff] PMD ->ffff81000d200000 on node 0
> [ffffe20006c00000-ffffe20006dfffff] PMD ->ffff81000d600000 on node 0
> [ffffe20006e00000-ffffe20006ffffff] PMD ->ffff81000da00000 on node 0
> [ffffe20007000000-ffffe200071fffff] PMD ->ffff81000de00000 on node 0
> [ffffe20007200000-ffffe200073fffff] PMD ->ffff81000e200000 on node 0
> [ffffe20007400000-ffffe200075fffff] PMD ->ffff81000e600000 on node 0
> [ffffe20007600000-ffffe200077fffff] PMD ->ffff81000ea00000 on node 0
> [ffffe20007800000-ffffe200079fffff] PMD ->ffff81000ee00000 on node 0
> [ffffe20007a00000-ffffe20007bfffff] PMD ->ffff81000f200000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  2293760
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0:        0 ->      158
>    0:      256 ->   849792
>    0:  1048576 ->  2293760
>On node 0 totalpages: 2094878
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1390 pages reserved
>  DMA zone: 2552 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 831416 pages, LIFO batch:31
>  Normal zone: 17024 pages used for memmap
>  Normal zone: 1228160 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0xffffffff base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009e000 - 000000000009f000
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
>PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
>PM: Registered nosave memory: 00000000cf780000 - 00000000cf78e000
>PM: Registered nosave memory: 00000000cf78e000 - 00000000cf7e0000
>PM: Registered nosave memory: 00000000cf7e0000 - 00000000cf800000
>PM: Registered nosave memory: 00000000cf800000 - 00000000fee00000
>PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
>PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
>PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
>Allocating PCI resources starting at d0000000 (gap: cf800000:2f600000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 45232 bytes of per cpu data
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2062128
>Policy zone: Normal
>Kernel command line: ro root=/dev/VG0/LV0 quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 2671.606 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing software IO TLB between 0xf433000 - 0x13433000
>Memory: 8187008k/9175040k available (2657k kernel code, 192504k reserved, 1395k data, 356k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 5349.31 BogoMIPS (lpj=2674657)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 20871908
>Detected 20.871 MHz APIC timer.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5343.01 BogoMIPS (lpj=2671505)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Duo CPU     E8200  @ 2.66GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=224 bytes
>sizeof(task_struct)=6272 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000001 00000000,00000002
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000002 00000000,00000001
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>net_namespace: 1016 bytes
>Time:  7:21:20  Date: 06/06/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  79, should be 70 [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 16 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
>system 00:07: ioport range 0x290-0x297 has been reserved
>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
>system 00:08: ioport range 0x800-0x87f has been reserved
>system 00:08: ioport range 0x480-0x4bf has been reserved
>system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
>system 00:08: iomem range 0xffa00000-0xffafffff has been reserved
>system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
>system 00:08: iomem range 0xffe00000-0xffefffff has been reserved
>system 00:08: iomem range 0xfff00000-0xfffffffe could not be reserved
>system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0f: iomem range 0x0-0x9ffff could not be reserved
>system 00:0f: iomem range 0xc0000-0xcffff has been reserved
>system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0f: iomem range 0x100000-0xcf7fffff could not be reserved
>system 00:0f: iomem range 0x0-0x0 could not be reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff
>PCI: Bridge: 0000:00:1c.4
>  IO window: d000-dfff
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: disabled.
>  MEM window: 0xfea00000-0xfeafffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: e000-efff
>  MEM window: 0xfeb00000-0xfebfffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3480k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1212736879.436:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT CF790100, 01D2 (r1    AMI   CPU1PM        1 INTL 20060113)
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: SSDT CF7902E0, 0143 (r1    AMI   CPU2PM        1 INTL 20060113)
>ACPI: ACPI0007:01 is registered as cooling_device1
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel G35 Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 12:13:369
>Freeing unused kernel memory: 356k freed
>Write protecting the kernel read-only data: 1120k
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7fbc00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7fb800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c480
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hub 2-0:1.0: unable to enumerate USB device on port 2
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.2 to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000c880
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1a.2
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c000
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb 2-4: new high speed USB device using ehci_hcd and address 3
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c080
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb 2-4: configuration #1 chosen from 1 choice
>usb 2-4: New USB device found, idVendor=05e3, idProduct=070e
>usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=2
>usb 2-4: Product: USB Storage
>usb 2-4: SerialNumber: 000000009602
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c400
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: UHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 uhci_hcd
>usb usb8: SerialNumber: 0000:00:1d.2
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22
>usb 6-2: new low speed USB device using uhci_hcd and address 2
>usb 6-2: configuration #1 chosen from 1 choice
>input: 2.4G USB RF KeyBoard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input1
>input,hidraw0: USB HID v1.10 Keyboard [2.4G USB RF KeyBoard] on usb-0000:00:1d.0-2
>input: 2.4G USB RF KeyBoard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input2
>input,hiddev96,hidraw1: USB HID v1.10 Mouse [2.4G USB RF KeyBoard] on usb-0000:00:1d.0-2
>usb 6-2: New USB device found, idVendor=05af, idProduct=0522
>usb 6-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>usb 6-2: Product: 2.4G USB RF KeyBoard
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfe7fa800 port 0xfe7fa900 irq 22
>ata2: SATA max UDMA/133 abar m2048@0xfe7fa800 port 0xfe7fa980 irq 22
>ata3: SATA max UDMA/133 abar m2048@0xfe7fa800 port 0xfe7faa00 irq 22
>ata4: SATA max UDMA/133 abar m2048@0xfe7fa800 port 0xfe7faa80 irq 22
>ata5: SATA max UDMA/133 abar m2048@0xfe7fa800 port 0xfe7fab00 irq 22
>ata6: SATA max UDMA/133 abar m2048@0xfe7fa800 port 0xfe7fab80 irq 22
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-8: FUJITSU MHY2120BH, 0000000B, max UDMA/100
>ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/100
>ata2: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHY2120B 0000 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1212736886.902:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux:8192 avtab hash slots allocated. Num of rules:167099
>SELinux:8192 avtab hash slots allocated. Num of rules:167099
>security:  8 users, 12 roles, 2308 types, 113 bools, 1 sens, 1024 cats
>security:  72 classes, 167099 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1212736887.271:3): policy loaded auid=4294967295 ses=4294967295
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>ACPI: Power Button (CM) [PWRB]
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>ACPI: PCI interrupt for device 0000:02:00.0 disabled
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>scsi6 : pata_jmicron
>scsi7 : pata_jmicron
>ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
>ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
>[drm] Initialized drm 1.1.0 20060810
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>Initializing USB Mass Storage driver...
>scsi8 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ata7.01: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WQ02, max UDMA/33
>input: PC Speaker as /devices/platform/pcspkr/input/input5
>ata7.01: configured for UDMA/33
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>[drm] Initialized i915 1.12.0 20071122 on minor 0
>Floppy drive(s): fd0 is 1.44M
>scsi 6:0:1:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WQ02 PQ: 0 ANSI: 5
>scsi 6:0:1:0: Attached scsi generic sg1 type 5
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>atl1 0000:01:00.0: version 2.0.7
>ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 16 (level, low) -> IRQ 16
>FDC 0 is a post-1991 82077
>firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI version 1.10
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 6:0:1:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401
>ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x3
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:2857: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
>ALSA sound/pci/hda/hda_codec.c:2861:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2865:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2866:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:2874:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
>ALSA sound/pci/hda/hda_generic.c:678: hda_generic: no proper input path found
>ALSA sound/pci/hda/hda_generic.c:426: hda_generic: no proper output path found
>ALSA sound/pci/hda/hda_generic.c:1021: hda_generic: no PCM found
>Linux video capture interface: v2.00
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Line-Out Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Switch, skipped
>firewire_core: created device fw0: GUID 001e8c000103da89, S400
>saa7130/34: v4l2 driver version 0.2.14 loaded
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>saa7130[0]: found at 0000:04:00.0, rev: 1, irq: 16, latency: 64, mmio: 0xfebffc00
>saa7130[0]: subsystem: 185b:c901, board: Compro Videomate DVB-T200 [card=71,autodetected]
>saa7130[0]: board init: gpio is 843f00
>input: saa7134 IR (Compro Videomate DV as /devices/pci0000:00/0000:00:1e.0/0000:04:00.0/input/input6
>saa7130[0]: i2c eeprom 00: 5b 18 01 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
>saa7130[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 88 ff ff ff ff
>saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom 40: ff d0 00 c2 86 10 ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb
>saa7130[0]: i2c eeprom 60: 30 26 ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: registered device video0 [v4l2]
>saa7130[0]: registered device vbi0
>DVB: registering new adapter (saa7130[0])
>DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
>tda1004x: setting up plls for 53MHz sampling clock
>device-mapper: multipath: version 1.0.5 loaded
>tda1004x: found firmware revision 26 -- ok
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>Adding 2031608k swap on /dev/mapper/VG0-LV1.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>usb-storage: device scan complete
>scsi 8:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9602 PQ: 0 ANSI: 0
>scsi 8:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9602 PQ: 0 ANSI: 0
>scsi 8:0:0:2: Direct-Access     Generic  STORAGE DEVICE   9602 PQ: 0 ANSI: 0
>scsi 8:0:0:3: Direct-Access     Generic  STORAGE DEVICE   9602 PQ: 0 ANSI: 0
>sd 8:0:0:0: [sdb] Attached SCSI removable disk
>sd 8:0:0:0: Attached scsi generic sg2 type 0
>sd 8:0:0:1: [sdc] Attached SCSI removable disk
>sd 8:0:0:1: Attached scsi generic sg3 type 0
>sd 8:0:0:2: [sdd] Attached SCSI removable disk
>sd 8:0:0:2: Attached scsi generic sg4 type 0
>sd 8:0:0:3: [sde] Attached SCSI removable disk
>sd 8:0:0:3: Attached scsi generic sg5 type 0
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>w83627ehf: Found W83627DHG chip at 0x290
>coretemp coretemp.0: Using relative temperature scale!
>coretemp coretemp.1: Using relative temperature scale!
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: BNEP (Ethernet Emulation) ver 1.2
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>atl1 0000:01:00.0: Unable to enable MSI: -22
>atl1 0000:01:00.0: eth0 link is up 1000 Mbps full duplex
>tda1004x: setting up plls for 53MHz sampling clock
>tda1004x: found firmware revision 26 -- ok
>mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
>eth0: no IPv6 routers present
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts

Actions: View

Attachments on bug 450247: 308513 | 308514 | 308515 | 309037 | 309038