Attachment 308540 Details for Bug 448779 – dmesg from sosreport

dmesg from sosreport

dmesg (text/plain), 16.90 KB, created by Matěj Cepl on 2008-06-06 14:58:35 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Matěj Cepl

Created: 2008-06-06 14:58:35 UTC

Size: 16.90 KB

patch

obsolete

>Linux version 2.6.9-70.ELsmp (brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-9)) #1 SMP Fri May 2 13:19:06 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000c7eb7c00 (usable)
> BIOS-e820: 00000000c7eb7c00 - 00000000d0000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
> BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>3968MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000fe700
>NX (Execute Disable) protection: active
>On node 0 totalpages: 1245184
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 225280 pages, LIFO batch:16
>  HighMem zone: 1015808 pages, LIFO batch:16
>DMI 2.5 present.
>Using APIC driver default
>ACPI: RSDP (v002 HPQOEM                                ) @ 0x000e6210
>ACPI: XSDT (v001 HPQOEM SLIC-WKS 0x20070823  0x00000000) @ 0xc7ec7ce8
>ACPI: FADT (v003 HPQOEM   xw4550 0x00000001  0x00000000) @ 0xc7ec7f20
>ACPI: MADT (v001 HPQOEM   xw4550 0x00000001  0x00000000) @ 0xc7ec802c
>ACPI: ASF! (v032 HPQOEM   xw4550 0x00000001  0x00000000) @ 0xc7ec80b0
>ACPI: MCFG (v001 HPQOEM   xw4550 0x00000001  0x00000000) @ 0xc7ec8113
>ACPI: TCPA (v001 HPQOEM   xw4550 0x00000001  0x00000000) @ 0xc7ec814f
>ACPI: SLIC (v001 HPQOEM SLIC-WKS 0x00000001  0x00000000) @ 0xc7ec8181
>ACPI: HPET (v001 HPQOEM   xw4550 0x00000001  0x00000000) @ 0xc7ec82f7
>ACPI: DSDT (v001 HPQOEM DSDT_PRJ 0x00000001 MSFT 0x0100000e) @ 0x00000000
>ATI chipset detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0xf808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:3 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:3 APIC version 16
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>Enabling APIC mode:  Flat.  Using 0 I/O APICs
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: HPET id: 0x10028300 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
>Built 1 zonelists
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0401000 soft=c03e1000
>PID hash table entries: 4096 (order: 12, 65536 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 4014960k/4980736k available (1924k kernel code, 46004k reserved, 780k data, 192k init, 3144412k highmem)
>Using HPET for base-timer
>Using HPET for gettimeofday
>Detected 2195.426 MHz processor.
>Using hpet for high-res timesource
>Calibrating delay using timer specific routine.. 4391.94 BogoMIPS (lpj=2195974)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000
>CPU: After vendor identify, caps:  178bfbff ebd3fbff 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0(2) -> Core 0
>CPU: After all inits, caps:        178bfbff ebd3fbff 00000000 00000410
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>CPU0: AMD Dual-Core AMD Opteron(tm) Processor 1214 HE stepping 03
>per-CPU timeslice cutoff: 2924.04 usecs.
>task migration cache decay timeout: 2 msecs.
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0402000 soft=c03e2000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4389.12 BogoMIPS (lpj=2194563)
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000
>CPU: After vendor identify, caps:  178bfbff ebd3fbff 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1(2) -> Core 1
>CPU: After all inits, caps:        178bfbff ebd3fbff 00000000 00000410
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: AMD Dual-Core AMD Opteron(tm) Processor 1214 HE stepping 03
>Total of 2 processors activated (8781.07 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 pin1=2 pin2=-1
>checking TSC synchronization across 2 CPUs: 
>CPU#0 had -1468994 usecs TSC skew, fixed it up.
>CPU#1 had 0 usecs TSC skew, fixed it up.
>Brought up 2 CPUs
>zapping low mappings.
>checking if image is initramfs... it is
>Freeing initrd memory: 1291k freed
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 3.00 entry at 0xef614, last bus=63
>PCI: Using MMCONFIG
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20040816
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IGFX._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>xen_mem: Initialising balloon driver.
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 169
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 177
>ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 185
>ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 193
>ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 185
>ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 193
>ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 201
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 177
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 177
>ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 18 (level, low) -> IRQ 193
>ACPI: PCI Interrupt 0000:3f:00.0[A] -> GSI 19 (level, low) -> IRQ 201
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1211976839.887:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 8390B03F6C38144
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports C1, 8 throttling states)
>ACPI: Processor [CPU1] (supports C1, 8 throttling states)
>Real Time Clock Driver v1.12
>Linux agpgart interface v0.100 (c) Dave Jones
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SB600_PATA: IDE controller at PCI slot 0000:00:14.1
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 177
>SB600_PATA: chipset revision 0
>SB600_PATA: 100% native mode on irq 177
>    ide0: BM-DMA at 0x2120-0x2127, BIOS settings: hda:pio, hdb:pio
>Probing IDE interface ide0...
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>Probing IDE interface ide2...
>Probing IDE interface ide3...
>Probing IDE interface ide4...
>Probing IDE interface ide5...
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP route cache hash table entries: 262144 (order: 8, 1048576 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 262144 (order: 9, 3145728 bytes)
>TCP: Hash tables configured (established 262144 bind 262144)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI wakeup devices: 
>PCI0 COM1 PEG1 IGFX PCX1 PCX2  HUB USB1 USB2 USB3 USB4 USB5 EUS1 PBTN 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 192k freed
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ahci 0000:00:12.0: version 2.0
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 169
>MSI INIT SUCCESS
>ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:12.0: flags: ncq ilck pm led clo pmp pio slum part 
>ata1: SATA max UDMA/133 cmd 0xF8806100 ctl 0x0 bmdma 0x0 irq 169
>ata2: SATA max UDMA/133 cmd 0xF8806180 ctl 0x0 bmdma 0x0 irq 169
>ata3: SATA max UDMA/133 cmd 0xF8806200 ctl 0x0 bmdma 0x0 irq 169
>ata4: SATA max UDMA/133 cmd 0xF8806280 ctl 0x0 bmdma 0x0 irq 169
>scsi0 : ahci
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7, max UDMA/100, 156301488 sectors: LBA48 
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: AHCI: Limiting to 255 sectors per command
>ata1.00: AHCI: Limiting to 255 sectors per command
>ata1.00: configured for UDMA/100
>scsi1 : ahci
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATAPI, max UDMA/100
>ata2.00: AHCI: Limiting to 255 sectors per command
>ata2.00: AHCI: Limiting to 255 sectors per command
>ata2.00: configured for UDMA/100
>scsi2 : ahci
>ata3: SATA link down (SStatus 0 SControl 300)
>scsi3 : ahci
>ata4: SATA link down (SStatus 0 SControl 300)
>Using cfq io scheduler
>  Vendor: ATA       Model: SAMSUNG HD080HJ/  Rev: ZH10
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>  Vendor: ATAPI     Model: DVD D  DH16DYS    Rev: XH31
>  Type:   CD-ROM                             ANSI SCSI revision: 05
>device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 4 roles, 356 types, 26 bools
>security:  55 classes, 22665 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
>inserting floppy driver for 2.6.9-70.ELsmp
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>tg3.c:v3.86 (November 9, 2007)
>ACPI: PCI Interrupt 0000:3f:00.0[A] -> GSI 19 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:3f:00.0 to 64
>divert: allocating divert_blk for eth0
>eth0: Tigon3 [partno(BCM95755) rev a002 PHY(5755)] (PCI Express) 10/100/1000Base-T Ethernet 00:1b:78:a1:16:2e
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 177
>MC: drivers/edac/edac_mc.c version MC $Revision: 1.3 $
>MC0: Giving out device to k8_edac Athlon64/Opteron: PCI 0000:00:18.2 (0000:00:18.2)
>ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 201
>ehci_hcd 0000:00:13.5: EHCI Host Controller
>ehci_hcd 0000:00:13.5: irq 201, pci mem f88fe400
>SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.5: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 177
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: request interrupt 177 failed
>ohci_hcd 0000:00:13.0: init 0000:00:13.0 fail, -16
>ohci_hcd: probe of 0000:00:13.0 failed with error -16
>ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 185
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: irq 185, pci mem f894a000
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 193
>ohci_hcd 0000:00:13.2: OHCI Host Controller
>ohci_hcd 0000:00:13.2: irq 193, pci mem f894c000
>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 185
>ohci_hcd 0000:00:13.3: OHCI Host Controller
>ohci_hcd 0000:00:13.3: irq 185, pci mem f894e000
>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 193
>ohci_hcd 0000:00:13.4: OHCI Host Controller
>ohci_hcd 0000:00:13.2: wakeup
>ohci_hcd 0000:00:13.4: irq 193, pci mem f8950000
>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>usb 3-1: new low speed USB device using address 2
>input: USB HID v1.10 Keyboard [SOLIDTEK USB Composite Keyboard] on usb-0000:00:13.2-1
>input,hiddev96: USB HID v1.10 Device [SOLIDTEK USB Composite Keyboard] on usb-0000:00:13.2-1
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c0352520(lo)
>IPv6 over IPv4 tunneling driver
>divert: not allocating divert_blk for non-ethernet device sit0
>ACPI: Power Button (FF) [PWRF]
>EXT3 FS on dm-0, internal journal
>loop: loaded (max 8 devices)
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 5275640k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

Actions: View

Attachments on bug 448779: 306971 | 308540 | 308541 | 308542 | 308543 | 308544