Attachment 308841 Details for Bug 450489 – dmesg with 2.6.25.5-19.fc8

dmesg with 2.6.25.5-19.fc8

dmesg-wireless (text/plain), 39.85 KB, created by Dhaval Giani on 2008-06-10 16:50:28 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dhaval Giani

Created: 2008-06-10 16:50:28 UTC

Size: 39.85 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.25.5-19.fc8 (mockbuild@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Sat Jun 7 02:50:57 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
> BIOS-e820: 000000007fed0000 - 000000007fedf000 (ACPI data)
> BIOS-e820: 000000007fedf000 - 000000007ff00000 (ACPI NVS)
> BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
>1150MB HIGHMEM available.
>896MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>found SMP MP-table at [c00f6810] 000f6810
>Reserving 64MB of memory at 32MB for crashkernel (System RAM: 2038MB)
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 523984) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   523984
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   523984
>On node 0 totalpages: 523984
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2301 pages used for memmap
>  HighMem zone: 292307 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F67D0, 0024 (r2 LENOVO)
>ACPI: XSDT 7FED1486, 0084 (r1 LENOVO TP-79        2090  LTP        0)
>ACPI: FACP 7FED1600, 00F4 (r3 LENOVO TP-79        2090 LNVO        1)
>ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
>ACPI: DSDT 7FED195E, D481 (r1 LENOVO TP-79        2090 MSFT  100000E)
>ACPI: FACS 7FEF4000, 0040
>ACPI: SSDT 7FED17B4, 01AA (r1 LENOVO TP-79        2090 MSFT  100000E)
>ACPI: ECDT 7FEDEDDF, 0052 (r1 LENOVO TP-79        2090 LNVO        1)
>ACPI: TCPA 7FEDEE31, 0032 (r2 LENOVO TP-79        2090 LNVO        1)
>ACPI: APIC 7FEDEE63, 0068 (r1 LENOVO TP-79        2090 LNVO        1)
>ACPI: MCFG 7FEDEECB, 003C (r1 LENOVO TP-79        2090 LNVO        1)
>ACPI: HPET 7FEDEF07, 0038 (r1 LENOVO TP-79        2090 LNVO        1)
>ACPI: BOOT 7FEDEFD8, 0028 (r1 LENOVO TP-79        2090  LTP        1)
>ACPI: SSDT 7FEF2697, 025F (r1 LENOVO TP-79        2090 INTL 20050513)
>ACPI: SSDT 7FEF28F6, 00A6 (r1 LENOVO TP-79        2090 INTL 20050513)
>ACPI: SSDT 7FEF299C, 04F7 (r1 LENOVO TP-79        2090 INTL 20050513)
>ACPI: SSDT 7FEF2E93, 01D8 (r1 LENOVO TP-79        2090 INTL 20050513)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:14 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:14 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
>PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
>PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519891
>Kernel command line: ro root=LABEL=/1 rhgb quiet vga=791 crashkernel=64M@32M
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07bc000 soft=c079c000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2161.391 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2004368k/2095936k available (2231k kernel code, 90304k reserved, 1142k data, 280k init, 1178432k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0753000 - 0xc0799000   ( 280 kB)
>      .data : 0xc062de58 - 0xc074ba28   (1142 kB)
>      .text : 0xc0400000 - 0xc062de58   (2231 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 4326.51 BogoMIPS (lpj=2163259)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using mwait in idle threads.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20070126
>CPU0: Intel Genuine Intel(R) CPU           T2600  @ 2.16GHz stepping 08
>Booting processor 1/1 ip 4000
>CPU 1 irqstacks, hard=c07bd000 soft=c079d000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4322.52 BogoMIPS (lpj=2161260)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel Genuine Intel(R) CPU           T2600  @ 2.16GHz stepping 08
>Total of 2 processors activated (8649.03 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]:
>Measured 616174 cycles TSC warp between CPUs, turning off TSC clock.
>Marking TSC unstable due to: check_tsc_sync_source failed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=3696 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 20:48:32  Date: 06/10/08
>NET: Registered protocol family 16
>ACPI: ACPI Dock Station Driver 
>ACPI: bus type pci registered
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Power Resource [PUBS] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Switched to high resolution mode on CPU 0
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
>system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
>system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
>system 00:00: iomem range 0xcc000-0xcffff could not be reserved
>system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
>system 00:00: iomem range 0x0-0x0 could not be reserved
>system 00:00: iomem range 0x0-0x0 could not be reserved
>system 00:00: iomem range 0xdc000-0xdffff has been reserved
>system 00:00: iomem range 0xe0000-0xe3fff has been reserved
>system 00:00: iomem range 0xe4000-0xe7fff has been reserved
>system 00:00: iomem range 0xe8000-0xebfff has been reserved
>system 00:00: iomem range 0xec000-0xeffff has been reserved
>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x7fffffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
>system 00:00: iomem range 0xfed41000-0xffffffff could not be reserved
>system 00:02: ioport range 0x164e-0x164f has been reserved
>system 00:02: ioport range 0x1000-0x107f has been reserved
>system 00:02: ioport range 0x1180-0x11bf has been reserved
>system 00:02: ioport range 0x800-0x80f has been reserved
>system 00:02: ioport range 0x15e0-0x15ef has been reserved
>system 00:02: ioport range 0x1600-0x165f could not be reserved
>system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
>system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
>system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
>system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
>Switched to high resolution mode on CPU 1
>PCI: Bridge: 0000:00:01.0
>  IO window: 2000-2fff
>  MEM window: 0xee100000-0xee1fffff
>  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: 3000-3fff
>  MEM window: 0xee000000-0xee0fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: 4000-5fff
>  MEM window: 0xec000000-0xedffffff
>  PREFETCH window: 0x00000000e4000000-0x00000000e40fffff
>PCI: Bridge: 0000:00:1c.2
>  IO window: 6000-7fff
>  MEM window: 0xe8000000-0xe9ffffff
>  PREFETCH window: 0x00000000e4100000-0x00000000e41fffff
>PCI: Bridge: 0000:00:1c.3
>  IO window: 8000-9fff
>  MEM window: 0xea000000-0xebffffff
>  PREFETCH window: 0x00000000e4200000-0x00000000e42fffff
>PCI: Bus 22, cardbus bridge: 0000:15:00.0
>  IO window: 0x0000a000-0x0000a0ff
>  IO window: 0x0000a400-0x0000a4ff
>  PREFETCH window: 0xe0000000-0xe3ffffff
>  MEM window: 0x88000000-0x8bffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: a000-dfff
>  MEM window: 0xe4300000-0xe7ffffff
>  PREFETCH window: 0x00000000e0000000-0x00000000e3ffffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2993k freed
>Simple Boot Flag at 0x35 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1213130912.473:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key B2441EF23F5CF837
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>Allocate Port Service[0000:00:1c.2:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>Allocate Port Service[0000:00:1c.3:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3072k, total 16384k
>vesafb: mode is 1024x768x16, linelength=2048, pages=9
>vesafb: protected mode interface info at c000:afd4
>vesafb: pmi: set display start = c00cb05c, set palette = c00cb118
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>fbcon: VESA VGA (fb0) is primary device
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>ACPI: SSDT 7FEF1D36, 0282 (r1  PmRef  Cpu0Ist      100 INTL 20050513)
>ACPI: SSDT 7FEF203D, 065A (r1  PmRef  Cpu0Cst      100 INTL 20050513)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7FEF1C6E, 00C8 (r1  PmRef  Cpu1Ist      100 INTL 20050513)
>ACPI: SSDT 7FEF1FB8, 0085 (r1  PmRef  Cpu1Cst      100 INTL 20050513)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THM0] (60 C)
>ACPI: LNXTHERM:02 is registered as thermal_zone1
>ACPI: Thermal Zone [THM1] (61 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>brd: module loaded
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012]
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:15:00.0, mfunc 0x01d01002, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
>Socket status: 30000007
>pcmcia: parent PCI bridge I/O window: 0xa000 - 0xdfff
>cs: IO port probe 0xa000-0xdfff: clean.
>pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff
>pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 12:659:851
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 924k
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee404000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25.5-19.fc8 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25.5-19.fc8 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
>serio: Synaptics pass-through port at isa0060/serio1/input0
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25.5-19.fc8 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25.5-19.fc8 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25.5-19.fc8 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404500 irq 16
>ata2: DUMMY
>ata3: DUMMY
>ata4: DUMMY
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: HTS721010G9SA00, MCZIC10V, max UDMA/100
>ata1.00: 195371568 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      HTS721010G9SA00  MCZI PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi4 : ata_piix
>scsi5 : ata_piix
>ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
>ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
>ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-4083N, 1.08, max UDMA/33
>ata5.00: configured for UDMA/33
>ata6: port disabled. ignoring.
>scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4083N 1.08 PQ: 0 ANSI: 5
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /class/input/input3
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>type=1404 audit(1213130922.370:2): selinux=0 auid=4294967295 ses=4294967295
>Clocksource tsc unstable (delta = -183467961 ns)
>Driver 'sr' needs updating - please use bus_type methods
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 4:0:0:0: Attached scsi generic sg1 type 5
>input: PC Speaker as /class/input/input4
>intel_rng: FWH not detected
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>ath5k_pci 0000:03:00.0: registered as 'phy0'
>phy0: Selected rate control algorithm 'pid'
>NET: Registered protocol family 23
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>nsc-ircc 00:0a: activated
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x164e
>nsc-ircc, driver loaded (Dag Brattli)
>iTCO_vendor_support: vendor-support=0
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
>e1000e: Copyright (c) 1999-2007 Intel Corporation.
>ACPI: device:03 is registered as cooling_device2
>input: Video Bus as /class/input/input5
>input: Power Button (FF) as /class/input/input6
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI: device:08 is registered as cooling_device3
>input: Video Bus as /class/input/input7
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input8
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /class/input/input9
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay
>ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler
>ACPI: Error installing bay notify handler
>ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added
>ACPI: AC Adapter [AC] (on-line)
>thinkpad_acpi: ThinkPad ACPI Extras v0.19
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 79ETC9WW (2.09 ), EC 79HT50WW-1.07
>thinkpad_acpi: Lenovo ThinkPad T60p
>thinkpad_acpi: radio switch found; radios are enabled
>thinkpad_acpi: standard ACPI backlight interface available, not loading native one...
>input: ThinkPad Extra Buttons as /class/input/input10
>ACPI: Battery Slot [BAT0] (battery present)
>ath5k phy0: Atheros AR5424 chip found (MAC: 0xa3, PHY: 0x61)
>ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23
>e1000e 0000:02:00.0: Disabling L1 ASPM
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>IrDA: Registered device irda0
>nsc-ircc, Found dongle: No dongle connected
>udev: renamed network interface wlan0 to ath0
>eth0: (PCI Express:2.5GB/s:Width x1) 00:15:58:80:91:75
>eth0: Intel(R) PRO/1000 Network Connection
>eth0: MAC: 2, PHY: 2, PBA No: 005301-003
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
>hda_intel: probe_mask set to 0x1 for device 17aa:2010
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda5, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2490032k swap on /dev/sda7.  Priority:-1 extents:1 across:2490032k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>Loading iSCSI transport class v2.0-869.
>iscsi: registered transport (tcp)
>iscsi: registered transport (iser)
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>fuse init (API version 7.9)
>warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bridge firewalling registered
>virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>virbr0: starting userspace STP failed, starting kernel STP
>virbr0: no IPv6 routers present
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISOFS: changing to secondary root
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>ADDRCONF(NETDEV_UP): ath0: link is not ready
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: RX authentication from 00:1a:70:d6:2d:06 (alg=0 transaction=2 status=0)
>ath0: authenticated
>ath0: associate with AP 00:1a:70:d6:2d:06
>ath0: authentication frame received from 00:1a:70:d6:2d:06, but not in authenticate state - ignored
>ath0: RX AssocResp from 00:1a:70:d6:2d:06 (capab=0x421 status=0 aid=1)
>ath0: associated
>ath0: switched to short barker preamble (BSSID=00:1a:70:d6:2d:06)
>ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
>ath0: no IPv6 routers present
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>wc0: Disabled Privacy Extensions
>ath0: RX disassociation from 00:1a:70:d6:2d:06 (reason=8)
>ath0: disassociated
>ath0: RX deauthentication from 00:1a:70:d6:2d:06 (reason=3)
>ath0: deauthenticated
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: privacy configuration mismatch and mixed-cell disabled - disassociate
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: privacy configuration mismatch and mixed-cell disabled - disassociate
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: privacy configuration mismatch and mixed-cell disabled - disassociate
>ath0: authentication with AP 00:1a:70:d6:2d:06 timed out
>ath0: privacy configuration mismatch and mixed-cell disabled - disassociate
>ath0: privacy configuration mismatch and mixed-cell disabled - disassociate
>ADDRCONF(NETDEV_UP): ath0: link is not ready
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: privacy configuration mismatch and mixed-cell disabled - disassociate
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: privacy configuration mismatch and mixed-cell disabled - disassociate
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: privacy configuration mismatch and mixed-cell disabled - disassociate
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: privacy configuration mismatch and mixed-cell disabled - disassociate
>ath0: authentication with AP 00:1a:70:d6:2d:06 timed out
>ath0: privacy configuration mismatch and mixed-cell disabled - disassociate
>ADDRCONF(NETDEV_UP): ath0: link is not ready
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ADDRCONF(NETDEV_UP): ath0: link is not ready
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: privacy configuration mismatch and mixed-cell disabled - disassociate
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: privacy configuration mismatch and mixed-cell disabled - disassociate
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: privacy configuration mismatch and mixed-cell disabled - disassociate
>ath0: authentication with AP 00:1a:70:d6:2d:06 timed out
>ath0: privacy configuration mismatch and mixed-cell disabled - disassociate
>ADDRCONF(NETDEV_UP): ath0: link is not ready
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: privacy configuration mismatch and mixed-cell disabled - disassociate
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: privacy configuration mismatch and mixed-cell disabled - disassociate
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: privacy configuration mismatch and mixed-cell disabled - disassociate
>ath0: authentication with AP 00:1a:70:d6:2d:06 timed out
>ath0: privacy configuration mismatch and mixed-cell disabled - disassociate
>ADDRCONF(NETDEV_UP): ath0: link is not ready
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: privacy configuration mismatch and mixed-cell disabled - disassociate
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: privacy configuration mismatch and mixed-cell disabled - disassociate
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: privacy configuration mismatch and mixed-cell disabled - disassociate
>ath0: authentication with AP 00:1a:70:d6:2d:06 timed out
>ath0: privacy configuration mismatch and mixed-cell disabled - disassociate
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: authentication with AP 00:1a:70:d6:2d:06 timed out
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ADDRCONF(NETDEV_UP): ath0: link is not ready
>ADDRCONF(NETDEV_UP): ath0: link is not ready
>ath5k phy0: noise floor calibration timeout (2462MHz)
>ath5k phy0: noise floor calibration timeout (2462MHz)
>ath5k phy0: ath5k_chan_set: unable to reset channel (2462 Mhz)
>ath0: failed to restore operational channel after scan
>ath5k phy0: can't reset hardware (-11)
>ath0: Failed to config new BSSID to the low-level driver
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: authentication with AP 00:1a:70:d6:2d:06 timed out
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: authentication with AP 00:1a:70:d6:2d:06 timed out
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: authentication with AP 00:1a:70:d6:2d:06 timed out
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: authentication with AP 00:1a:70:d6:2d:06 timed out
>ath0: RX disassociation from 00:1a:70:d6:2d:06 (reason=8)
>ath0: RX deauthentication from 00:1a:70:d6:2d:06 (reason=3)
>ath0: RX disassociation from 00:1a:70:d6:2d:06 (reason=8)
>ath0: RX deauthentication from 00:1a:70:d6:2d:06 (reason=3)
>ADDRCONF(NETDEV_UP): ath0: link is not ready
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: RX authentication from 00:1a:70:d6:2d:06 (alg=0 transaction=2 status=0)
>ath0: authenticated
>ath0: associate with AP 00:1a:70:d6:2d:06
>ath0: RX AssocResp from 00:1a:70:d6:2d:06 (capab=0x421 status=0 aid=1)
>ath0: associated
>ath0: switched to short barker preamble (BSSID=00:1a:70:d6:2d:06)
>ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: RX authentication from 00:1a:70:d6:2d:06 (alg=0 transaction=2 status=0)
>ath0: authenticated
>ath0: associate with AP 00:1a:70:d6:2d:06
>ath0: RX ReassocResp from 00:1a:70:d6:2d:06 (capab=0x421 status=0 aid=1)
>ath0: associated
>ath0: disassociate(reason=3)
>ath0: no IPv6 routers present
>ADDRCONF(NETDEV_UP): ath0: link is not ready
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: RX authentication from 00:1a:70:d6:2d:06 (alg=0 transaction=2 status=0)
>ath0: authenticated
>ath0: associate with AP 00:1a:70:d6:2d:06
>ath0: RX AssocResp from 00:1a:70:d6:2d:06 (capab=0x421 status=0 aid=1)
>ath0: associated
>ath0: switched to short barker preamble (BSSID=00:1a:70:d6:2d:06)
>ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
>ath0: No ProbeResp from current AP 00:1a:70:d6:2d:06 - assume out of range
>ADDRCONF(NETDEV_UP): ath0: link is not ready
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: RX authentication from 00:1a:70:d6:2d:06 (alg=0 transaction=2 status=0)
>ath0: authenticated
>ath0: associate with AP 00:1a:70:d6:2d:06
>ath0: authentication frame received from 00:1a:70:d6:2d:06, but not in authenticate state - ignored
>ath0: RX deauthentication from 00:1a:70:d6:2d:06 (reason=6)
>ath0: deauthenticated
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: RX authentication from 00:1a:70:d6:2d:06 (alg=0 transaction=2 status=0)
>ath0: authenticated
>ath0: associate with AP 00:1a:70:d6:2d:06
>ath0: RX AssocResp from 00:1a:70:d6:2d:06 (capab=0x421 status=0 aid=1)
>ath0: associated
>ath0: switched to short barker preamble (BSSID=00:1a:70:d6:2d:06)
>ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
>ath0: No ProbeResp from current AP 00:1a:70:d6:2d:06 - assume out of range
>ath0: no IPv6 routers present
>ADDRCONF(NETDEV_UP): ath0: link is not ready
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ADDRCONF(NETDEV_UP): ath0: link is not ready
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: RX authentication from 00:1a:70:d6:2d:06 (alg=0 transaction=2 status=0)
>ath0: authenticated
>ath0: associate with AP 00:1a:70:d6:2d:06
>ath0: RX AssocResp from 00:1a:70:d6:2d:06 (capab=0x421 status=0 aid=1)
>ath0: associated
>ath0: switched to short barker preamble (BSSID=00:1a:70:d6:2d:06)
>ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: RX authentication from 00:1a:70:d6:2d:06 (alg=0 transaction=2 status=0)
>ath0: authenticated
>ath0: associate with AP 00:1a:70:d6:2d:06
>ath0: RX ReassocResp from 00:1a:70:d6:2d:06 (capab=0x421 status=0 aid=1)
>ath0: associated
>ath0: disassociate(reason=3)
>ath0: no IPv6 routers present
>ADDRCONF(NETDEV_UP): ath0: link is not ready
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: RX authentication from 00:1a:70:d6:2d:06 (alg=0 transaction=2 status=0)
>ath0: authenticated
>ath0: associate with AP 00:1a:70:d6:2d:06
>ath0: RX AssocResp from 00:1a:70:d6:2d:06 (capab=0x421 status=0 aid=1)
>ath0: associated
>ath0: switched to short barker preamble (BSSID=00:1a:70:d6:2d:06)
>ath0: No ProbeResp from current AP 00:1a:70:d6:2d:06 - assume out of range
>ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
>ADDRCONF(NETDEV_UP): ath0: link is not ready
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: Initial auth_alg=0
>ath0: authenticate with AP 00:1a:70:d6:2d:06
>ath0: RX authentication from 00:1a:70:d6:2d:06 (alg=0 transaction=2 status=0)
>ath0: authenticated
>ath0: associate with AP 00:1a:70:d6:2d:06
>ath0: authentication frame received from 00:1a:70:d6:2d:06, but not in authenticate state - ignored
>ath0: RX AssocResp from 00:1a:70:d6:2d:06 (capab=0x421 status=0 aid=1)
>ath0: associated
>ath0: switched to short barker preamble (BSSID=00:1a:70:d6:2d:06)
>ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
>ath0: disassociate(reason=3)
>ath0: no IPv6 routers present

Actions: View

Attachments on bug 450489: 308668 | 308841