Attachment 308922 Details for Bug 450848 – The full dmesg output

The full dmesg output

dmesg.txt (text/plain), 45.47 KB, created by MC on 2008-06-11 12:07:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: MC

Created: 2008-06-11 12:07:57 UTC

Size: 45.47 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.25.4-10.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Thu May 22 23:34:09 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
> BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
> BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
> BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>found SMP MP-table at [c00ff780] 000ff780
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 524160) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524160
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   524160
>On node 0 totalpages: 524160
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2303 pages used for memmap
>  HighMem zone: 292481 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000FAF20, 0014 (r0 ACPIAM)
>ACPI: RSDT 7FF80000, 0044 (r1 NEC              3000707 MSFT       97)
>ACPI: FACP 7FF80200, 0081 (r1 A_M_I_ OEMFACP   3000707 MSFT       97)
>ACPI: DSDT 7FF80590, 9560 (r1  A0543 A0543000        0 INTL 20060113)
>ACPI: FACS 7FF8E000, 0040
>ACPI: APIC 7FF80390, 0080 (r1 A_M_I_ OEMAPIC   3000707 MSFT       97)
>ACPI: SLIC 7FF80410, 0176 (r1 NEC              3000707 MSFT       97)
>ACPI: OEMB 7FF8E040, 0066 (r1 A_M_I_ AMI_OEM   3000707 MSFT       97)
>ACPI: HPET 7FF89AF0, 0038 (r1 A_M_I_ OEMHPET   3000707 MSFT       97)
>ACPI: MCFG 7FF89B30, 003C (r1 A_M_I_ OEMMCFG   3000707 MSFT       97)
>ACPI: SSDT 7FF8E0B0, 01C6 (r1    AMI   CPU1PM        1 INTL 20060113)
>ACPI: SSDT 7FF8E280, 013A (r1    AMI   CPU2PM        1 INTL 20060113)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:7fb00000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
>PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520065
>Kernel command line: ro root=LABEL=/1 rhgb quiet init=/sbin/bootchartd
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07bc000 soft=c079c000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2404.216 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2070644k/2096640k available (2231k kernel code, 24836k reserved, 1142k data, 280k init, 1179136k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0753000 - 0xc0799000   ( 280 kB)
>      .data : 0xc062de58 - 0xc074ba28   (1142 kB)
>      .text : 0xc0400000 - 0xc062de58   (2231 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 4811.27 BogoMIPS (lpj=2405635)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using mwait in idle threads.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
>Booting processor 1/1 ip 4000
>CPU 1 irqstacks, hard=c07bd000 soft=c079d000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6635.33 BogoMIPS (lpj=3317667)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
>Total of 2 processors activated (11446.60 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=3696 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  9:15:20  Date: 06/11/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  CB, should be C2 [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 16 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
>system 00:07: ioport range 0x290-0x297 has been reserved
>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
>system 00:08: ioport range 0x800-0x87f has been reserved
>system 00:08: ioport range 0x400-0x41f has been reserved
>system 00:08: ioport range 0x480-0x4bf has been reserved
>system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
>system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
>system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
>system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:0e: iomem range 0xf0000000-0xf3ffffff has been reserved
>system 00:0f: iomem range 0x0-0x9ffff could not be reserved
>system 00:0f: iomem range 0xc0000-0xdffff could not be reserved
>system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0f: iomem range 0x100000-0x7fffffff could not be reserved
>system 00:0f: iomem range 0x0-0x0 could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: 0xf8a00000-0xfeafffff
>  PREFETCH window: 0x00000000cff00000-0x00000000efefffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: 0x00000000cfe00000-0x00000000cfefffff
>PCI: Bridge: 0000:00:1c.3
>  IO window: b000-bfff
>  MEM window: 0xf8900000-0xf89fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: a000-afff
>  MEM window: 0xf8800000-0xf88fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: 9000-9fff
>  MEM window: 0xf8700000-0xf87fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2988k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1213175719.431:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 46A518549A1EA9A4
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:05:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._OSC] (Node f7811198), AE_ALREADY_EXISTS
>ACPI: Marking method _OSC as Serialized
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node f7811180), AE_ALREADY_EXISTS
>ACPI: Marking method _PDC as Serialized
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._OSC] (Node f7811270), AE_ALREADY_EXISTS
>ACPI: Marking method _OSC as Serialized
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node f7811258), AE_ALREADY_EXISTS
>ACPI: Marking method _PDC as Serialized
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI: Processor [CPU2] (supports 8 throttling states)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 12:497:272
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 924k
>logips2pp: Detected unknown logitech mouse model 101
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfebfbc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25.4-10.fc8 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e480
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25.4-10.fc8 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-7: new high speed USB device using ehci_hcd and address 2
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25.4-10.fc8 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25.4-10.fc8 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ec00
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-7: configuration #1 chosen from 1 choice
>hub 1-7:1.0: USB hub found
>hub 1-7:1.0: 4 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25.4-10.fc8 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>usb 1-7: New USB device found, idVendor=05e3, idProduct=0606
>usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 1-7: Product: USB2.0 Hub
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>usb 1-7.3: new high speed USB device using ehci_hcd and address 3
>usb 1-7.3: configuration #1 chosen from 1 choice
>usb 1-7.3: New USB device found, idVendor=0bda, idProduct=8187
>usb 1-7.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-7.3: Product: RTL8187_Wireless
>usb 1-7.3: Manufacturer: Manufacturer_Realtek_RTL8187_
>usb 1-7.3: SerialNumber: 0015AF0D395B
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-H12L, VL01, max UDMA/66
>ata1.00: configured for UDMA/66
>scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H12L  VL01 PQ: 0 ANSI: 5
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xd880 irq 23
>ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd888 irq 23
>ata3.00: ATA-7: ST3250620AS, 3.AAC, max UDMA/133
>ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.01: ATA-7: ST3250620AS, 3.AAC, max UDMA/133
>ata3.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>ata3.01: configured for UDMA/133
>ata4.00: ATA-6: Config  Disk, RGL10364, max UDMA/133
>ata4.00: 640 sectors, multi 1: LBA 
>ata4.00: Drive reports diagnostics failure. This may indicate a drive
>ata4.00: fault or invalid emulation. Contact drive vendor for information.
>ata4.00: device is on DMA blacklist, disabling DMA
>ata4.00: configured for PIO4
>scsi 2:0:0:0: Direct-Access     ATA      ST3250620AS      3.AA PQ: 0 ANSI: 5
>sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
>sd 2:0:0:0: [sda] Attached SCSI disk
>scsi 2:0:1:0: Direct-Access     ATA      ST3250620AS      3.AA PQ: 0 ANSI: 5
>sd 2:0:1:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:1:0: [sdb] Write Protect is off
>sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:1:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:1:0: [sdb] Write Protect is off
>sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 >
>sd 2:0:1:0: [sdb] Attached SCSI disk
>scsi 3:0:0:0: Direct-Access     ATA      Config  Disk     RGL1 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdc] 640 512-byte hardware sectors (0 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdc] 640 512-byte hardware sectors (0 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sdc:<3>ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata4.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata4.00: status: { DRDY }
>ata4: soft resetting link
>ata4.01: NODEV after polling detection
>ata4.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
>ata4.00: revalidation failed (errno=-5)
>ata4: failed to recover some devices, retrying in 5 secs
>ata4: soft resetting link
>ata4.01: NODEV after polling detection
>ata4.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
>ata4.00: revalidation failed (errno=-5)
>ata4: failed to recover some devices, retrying in 5 secs
>ata4: soft resetting link
>ata4.01: NODEV after polling detection
>ata4.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
>ata4.00: revalidation failed (errno=-5)
>ata4.00: disabled
>ata4: EH complete
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>Buffer I/O error on device sdc, logical block 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>Buffer I/O error on device sdc, logical block 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>Buffer I/O error on device sdc, logical block 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>Buffer I/O error on device sdc, logical block 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>Buffer I/O error on device sdc, logical block 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>Buffer I/O error on device sdc, logical block 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>Buffer I/O error on device sdc, logical block 0
>Dev sdc: unable to read RDB block 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>Buffer I/O error on device sdc, logical block 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>Buffer I/O error on device sdc, logical block 0
> unable to read partition table
>sd 3:0:0:0: [sdc] Attached SCSI disk
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 512
>Buffer I/O error on device sdc, logical block 64
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 512
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 8
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 16
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 24
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 32
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 40
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 48
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 56
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 64
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 72
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 80
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 88
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 96
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 104
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 112
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 120
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:8192 avtab hash slots allocated. Num of rules:219506
>SELinux:8192 avtab hash slots allocated. Num of rules:219506
>security:  8 users, 12 roles, 2387 types, 115 bools, 1 sens, 1024 cats
>security:  67 classes, 219506 rules
>security:  class peer not defined in policy
>security:  class capability2 not defined in policy
>security:  permission recvfrom in class node not defined in policy
>security:  permission sendto in class node not defined in policy
>security:  permission ingress in class netif not defined in policy
>security:  permission egress in class netif not defined in policy
>security:  permission setfcap in class capability not defined in policy
>security:  permission forward_in in class packet not defined in policy
>security:  permission forward_out in class packet not defined in policy
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>scsi 0:0:0:0: Attached scsi generic sg0 type 5
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>sd 2:0:1:0: Attached scsi generic sg2 type 0
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>intel_rng: FWH not detected
>iTCO_vendor_support: vendor-support=0
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 23 (level, low) -> IRQ 23
>input: PC Speaker as /class/input/input3
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>sky2 0000:03:00.0: v1.21 addr 0xf89fc000 irq 19 Yukon-EC (0xb6) rev 2
>sky2 eth0: addr 00:18:f3:c5:4c:53
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>sky2 0000:02:00.0: v1.21 addr 0xf88fc000 irq 16 Yukon-EC (0xb6) rev 2
>sky2 eth1: addr 00:18:f3:c5:30:f3
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.05  Mon May 19 00:06:12 PDT 2008
>EDAC MC: Ver: 2.1.0 May 22 2008
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>EDAC i82975x: ECC disabled on both channels.
>ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 21
>firewire_ohci: Added fw-ohci device 0000:01:03.0, OHCI version 1.10
>phy0: Selected rate control algorithm 'pid'
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>phy0: hwaddr 00:15:af:0d:39:5b, rtl8187 V1 + rtl8225z2
>usbcore: registered new interface driver rtl8187
>ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 22 (level, low) -> IRQ 22
>snd-ca0106: Model 1012 Rev 00000000 Serial 10121102
>firewire_core: created device fw0: GUID 0011d80000f97456, S400
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 632
>printk: 24 messages suppressed.
>Buffer I/O error on device sdc, logical block 79
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 632
>Buffer I/O error on device sdc, logical block 79
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 632
>Buffer I/O error on device sdc, logical block 79
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 632
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 376
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 376
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 8
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 8
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 624
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 624
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 632
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 632
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 632
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 632
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 632
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 632
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 632
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 632
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 576
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 576
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 384
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 384
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 384
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 384
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 624
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 624
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 240
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 240
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 632
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 632
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 632
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 632
>EXT3 FS on sda1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda8, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda8, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 1028120k swap on /dev/sda7.  Priority:-1 extents:1 across:1028120k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>sky2 eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth0: no IPv6 routers present
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>printk: 29 messages suppressed.
>Buffer I/O error on device sdc, logical block 0
>Buffer I/O error on device sdc, logical block 1
>Buffer I/O error on device sdc, logical block 2
>Buffer I/O error on device sdc, logical block 3
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>Buffer I/O error on device sdc, logical block 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 1
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 2
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 3
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 4
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 5
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 6
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 7
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 8
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 9
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 10
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 11
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 12
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 13
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 14
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 15
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 1
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 639
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>qtparted[7193]: segfault at c0020f03 ip 08077526 sp bff9cca0 error 5 in qtparted[8048000+65000]
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 1
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 2
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 3
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 4
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 5
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 6
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 7
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 8
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 9
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 10
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 11
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 12
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 13
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 14
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 15
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 1
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 639
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0
>qtparted[7215]: segfault at c0012ef3 ip 08077526 sp bff8ec90 error 5 in qtparted[8048000+65000]
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdc, sector 0

Actions: View

Attachments on bug 450848: 308922