Attachment 308980 Details for Bug 449210 – dmesg of Fedora 8 boot

dmesg of Fedora 8 boot

q (text/plain), 40.82 KB, created by Ferry Huberts on 2008-06-11 19:05:08 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ferry Huberts

Created: 2008-06-11 19:05:08 UTC

Size: 40.82 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.25.4-10.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Thu May 22 22:58:37 EDT 2008
>Command line: ro root=/dev/Fedora8/root rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
> BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
> BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
> BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000180000000 (usable)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524160) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1572864) 2 entries of 3200 used
>end_pfn_map = 1572864
>DMI 2.4 present.
>ACPI: RSDP 000FAF00, 0024 (r2 ACPIAM)
>ACPI: XSDT 7FF80100, 004C (r1 A_M_I_ OEMXSDT   3000820 MSFT       97)
>ACPI: FACP 7FF80290, 00F4 (r3 A_M_I_ OEMFACP   3000820 MSFT       97)
>ACPI: DSDT 7FF80590, 9554 (r1  A0543 A0543000        0 INTL 20060113)
>ACPI: FACS 7FF8E000, 0040
>ACPI: APIC 7FF80390, 0080 (r1 A_M_I_ OEMAPIC   3000820 MSFT       97)
>ACPI: OEMB 7FF8E040, 0066 (r1 A_M_I_ AMI_OEM   3000820 MSFT       97)
>ACPI: HPET 7FF89AF0, 0038 (r1 A_M_I_ OEMHPET   3000820 MSFT       97)
>ACPI: MCFG 7FF89B30, 003C (r1 A_M_I_ OEMMCFG   3000820 MSFT       97)
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000180000000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524160) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1572864) 2 entries of 3200 used
>Bootmem setup node 0 0000000000000000-0000000180000000
>  NODE_DATA [000000000000e000 - 0000000000015fff]
>  bootmap [0000000000016000 -  0000000000045fff] pages 30
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-757aeb] TEXT DATA BSS
>early res: 3 [37bec000-37fef341] RAMDISK
>early res: 4 [9fc00-a0bff] EBDA
>early res: 5 [8000-dfff] PGTABLE
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
> [ffffe20003800000-ffffe200039fffff] PMD ->ffff810004a00000 on node 0
> [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810004e00000 on node 0
> [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810005200000 on node 0
> [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810005600000 on node 0
> [ffffe20004000000-ffffe200041fffff] PMD ->ffff810005a00000 on node 0
> [ffffe20004200000-ffffe200043fffff] PMD ->ffff810005e00000 on node 0
> [ffffe20004400000-ffffe200045fffff] PMD ->ffff810006200000 on node 0
> [ffffe20004600000-ffffe200047fffff] PMD ->ffff810006600000 on node 0
> [ffffe20004800000-ffffe200049fffff] PMD ->ffff810006a00000 on node 0
> [ffffe20004a00000-ffffe20004bfffff] PMD ->ffff810006e00000 on node 0
> [ffffe20004c00000-ffffe20004dfffff] PMD ->ffff810007200000 on node 0
> [ffffe20004e00000-ffffe20004ffffff] PMD ->ffff810007600000 on node 0
> [ffffe20005000000-ffffe200051fffff] PMD ->ffff810007a00000 on node 0
> [ffffe20005200000-ffffe200053fffff] PMD ->ffff810007e00000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1572864
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   524160
>    0:  1048576 ->  1572864
>On node 0 totalpages: 1048351
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1379 pages reserved
>  DMA zone: 2564 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 505784 pages, LIFO batch:31
>  Normal zone: 7168 pages used for memmap
>  Normal zone: 517120 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
>PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
>PM: Registered nosave memory: 000000007ff80000 - 000000007ff8e000
>PM: Registered nosave memory: 000000007ff8e000 - 000000007ffe0000
>PM: Registered nosave memory: 000000007ffe0000 - 0000000080000000
>PM: Registered nosave memory: 0000000080000000 - 00000000ffb00000
>PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
>Allocating PCI resources starting at 88000000 (gap: 80000000:7fb00000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 43072 bytes of per cpu data
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1025468
>Policy zone: Normal
>Kernel command line: ro root=/dev/Fedora8/root rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 2404.109 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing software IO TLB between 0x8027000 - 0xc027000
>Memory: 4059884k/6291456k available (2632k kernel code, 133520k reserved, 1413k data, 344k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 4811.03 BogoMIPS (lpj=2405516)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 16695192
>Detected 16.695 MHz APIC timer.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4808.23 BogoMIPS (lpj=2404116)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=224 bytes
>sizeof(task_struct)=6224 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000001 00000000,00000002
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000002 00000000,00000001
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>net_namespace: 1016 bytes
>Time: 18:54:57  Date: 06/11/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  C1, should be B8 [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
>system 00:07: ioport range 0x290-0x297 has been reserved
>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
>system 00:08: ioport range 0x800-0x87f has been reserved
>system 00:08: ioport range 0x400-0x41f has been reserved
>system 00:08: ioport range 0x480-0x4bf has been reserved
>system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
>system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
>system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
>system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:0d: iomem range 0xf0000000-0xf3ffffff has been reserved
>system 00:0e: iomem range 0x0-0x9ffff could not be reserved
>system 00:0e: iomem range 0xc0000-0xdffff has been reserved
>system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
>system 00:0e: iomem range 0x0-0x0 could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: 0xf8a00000-0xfeafffff
>  PREFETCH window: 0x00000000cff00000-0x00000000efefffff
>PCI: Bridge: 0000:07:00.0
>  IO window: disabled.
>  MEM window: 0xf8900000-0xf89fffff
>  PREFETCH window: 0x00000000cf700000-0x00000000cfefffff
>PCI: Bridge: 0000:07:00.2
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: disabled.
>  MEM window: 0xf8900000-0xf89fffff
>  PREFETCH window: 0x00000000cf700000-0x00000000cfefffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: 0x00000000cf600000-0x00000000cf6fffff
>PCI: Bridge: 0000:00:1c.3
>  IO window: b000-bfff
>  MEM window: 0xf8800000-0xf88fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: a000-afff
>  MEM window: 0xf8700000-0xf87fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: 9000-9fff
>  MEM window: 0xf8600000-0xf86fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:01:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: 0x00000000bf600000-0x00000000cf5fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: 0xf8500000-0xf85fffff
>  PREFETCH window: 0x00000000bf600000-0x00000000cf5fffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:07:00.0 to 64
>PCI: Setting latency timer of device 0000:07:00.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 4108k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1213210496.475:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 2DC01A11EEC9936B
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:0a:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI: Processor [CPU2] (supports 8 throttling states)
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 12:625:948
>  hash matches device tty5
>Freeing unused kernel memory: 344k freed
>Write protecting the kernel read-only data: 1128k
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfebfbc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25.4-10.fc8 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e480
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25.4-10.fc8 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hub 1-0:1.0: unable to enumerate USB device on port 1
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25.4-10.fc8 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25.4-10.fc8 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ec00
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25.4-10.fc8 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>usb 1-2: new high speed USB device using ehci_hcd and address 3
>SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
>SGI XFS Quota Management subsystem
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>ACPI: PCI Interrupt 0000:09:0e.0[A] -> GSI 18 (level, low) -> IRQ 18
>ARECA RAID ADAPTER0: FIRMWARE VERSION V1.44 2008-2-1   
>scsi0 : Areca SATA Host Adapter RAID Controller
> Driver Version 1.20.00.15 2008/02/27
>scsi 0:0:0:0: Direct-Access     Areca    ARC-1210-VOL#00  R001 PQ: 0 ANSI: 5
>scsi 0:0:0:1: Direct-Access     Areca    ARC-1210-VOL#01  R001 PQ: 0 ANSI: 5
>scsi 0:0:0:2: Direct-Access     Areca    ARC-1210-VOL#02  R001 PQ: 0 ANSI: 5
>scsi 0:0:16:0: Processor         Areca    RAID controller  R001 PQ: 0 ANSI: 0
>sd 0:0:0:0: [sda] 58592256 512-byte hardware sectors (29999 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 58592256 512-byte hardware sectors (29999 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:1: [sdb] 58592256 512-byte hardware sectors (29999 MB)
>sd 0:0:0:1: [sdb] Write Protect is off
>sd 0:0:0:1: [sdb] Mode Sense: cb 00 00 08
>sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:1: [sdb] 58592256 512-byte hardware sectors (29999 MB)
>sd 0:0:0:1: [sdb] Write Protect is off
>sd 0:0:0:1: [sdb] Mode Sense: cb 00 00 08
>sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb:<6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
> sdb1 sdb2
>sd 0:0:0:1: [sdb] Attached SCSI disk
>sd 0:0:0:2: [sdc] 1757812224 512-byte hardware sectors (900000 MB)
>sd 0:0:0:2: [sdc] Write Protect is off
>sd 0:0:0:2: [sdc] Mode Sense: cb 00 00 08
>sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:2: [sdc] 1757812224 512-byte hardware sectors (900000 MB)
>sd 0:0:0:2: [sdc] Write Protect is off
>sd 0:0:0:2: [sdc] Mode Sense: cb 00 00 08
>sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 0:0:0:2: [sdc] Attached SCSI disk
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi1 : ata_piix
>scsi2 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>usb 1-2: configuration #1 chosen from 1 choice
>hub 1-2:1.0: USB hub found
>hub 1-2:1.0: 2 ports detected
>usb 1-2: New USB device found, idVendor=0424, idProduct=2504
>usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>ata1.00: ATAPI: Optiarc DVD RW AD-7173A, 1-01, max UDMA/66
>hub 1-0:1.0: unable to enumerate USB device on port 3
>ata1.00: configured for UDMA/66
>hub 1-0:1.0: unable to enumerate USB device on port 4
>scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7173A  1-01 PQ: 0 ANSI: 5
>usb 1-7: new high speed USB device using ehci_hcd and address 6
>usb 1-7: configuration #1 chosen from 1 choice
>hub 1-7:1.0: USB hub found
>hub 1-7:1.0: 4 ports detected
>usb 1-7: New USB device found, idVendor=05e3, idProduct=0606
>usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 1-7: Product: USB2.0 Hub
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /class/input/input2
>input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1
>input: Logitech USB Receiver as /class/input/input3
>input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1
>usb 2-1: New USB device found, idVendor=046d, idProduct=c51a
>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1: Product: USB Receiver
>usb 2-1: Manufacturer: Logitech
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>hiddev97hidraw2: USB HID v1.10 Device [T-wins ASUS DH Remote] on usb-0000:00:1d.1-1
>usb 3-1: New USB device found, idVendor=1130, idProduct=cc00
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1: Product: ASUS DH Remote
>usb 3-1: Manufacturer: T-wins
>usb 3-2: new low speed USB device using uhci_hcd and address 3
>usb 3-2: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /class/input/input4
>input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2
>input: Logitech USB Receiver as /class/input/input5
>input,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2
>usb 3-2: New USB device found, idVendor=046d, idProduct=c504
>usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-2: Product: USB Receiver
>usb 3-2: Manufacturer: Logitech
>usb 1-7.3: new high speed USB device using ehci_hcd and address 7
>usb 1-7.3: configuration #1 chosen from 1 choice
>usb 1-7.3: New USB device found, idVendor=0bda, idProduct=8187
>usb 1-7.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-7.3: Product: RTL8187_Wireless
>usb 1-7.3: Manufacturer: Manufacturer_Realtek_RTL8187_
>usb 1-7.3: SerialNumber: 0015AF09CBE8
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23
>ahci 0000:00:1f.2: enabling ASUS P5W DH Deluxe on-board SIMG4726 workaround
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>scsi6 : ahci
>ata3: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfb900 irq 23
>ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 23
>ata5: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfba00 irq 23
>ata6: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfba80 irq 23
>ata3: SATA link down (SStatus 0 SControl 300)
>irq 23: nobody cared (try booting with the "irqpoll" option)
>Pid: 0, comm: swapper Not tainted 2.6.25.4-10.fc8 #1
>
>Call Trace:
> <IRQ>  [<ffffffff810709e7>] __report_bad_irq+0x38/0x7c
> [<ffffffff81070c26>] note_interrupt+0x1fb/0x241
> [<ffffffff81071520>] handle_fasteoi_irq+0xab/0xd0
> [<ffffffff8100e9ad>] do_IRQ+0xf6/0x169
> [<ffffffff8100af9b>] ? mwait_idle+0x0/0x4d
> [<ffffffff8100c371>] ret_from_intr+0x0/0xa
> <EOI>  [<ffffffff8100afe0>] ? mwait_idle+0x45/0x4d
> [<ffffffff8100a74d>] ? enter_idle+0x22/0x24
> [<ffffffff8100af2c>] ? cpu_idle+0x7a/0xa0
> [<ffffffff8127d316>] ? rest_init+0x5a/0x5c
>
>handlers:
>[<ffffffff8812cac8>] (ahci_interrupt+0x0/0x470 [ahci])
>Disabling IRQ #23
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: qc timeout (cmd 0xec)
>ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>ata4: failed to recover some devices, retrying in 5 secs
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: qc timeout (cmd 0xec)
>ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>ata4: failed to recover some devices, retrying in 5 secs
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: qc timeout (cmd 0xec)
>ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>ata4: failed to recover some devices, retrying in 5 secs
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>scsi7 : ahci
>scsi8 : ahci
>ata7: SATA max UDMA/133 abar m8192@0xf86fe000 port 0xf86fe100 irq 17
>ata8: SATA max UDMA/133 abar m8192@0xf86fe000 port 0xf86fe180 irq 17
>ata7: SATA link down (SStatus 0 SControl 300)
>ata8: SATA link down (SStatus 0 SControl 300)
>Filesystem "dm-0": Disabling barriers, not supported by the underlying device
>XFS mounting filesystem dm-0
>Ending clean XFS mount for filesystem: dm-0
>SELinux:8192 avtab hash slots allocated. Num of rules:219513
>SELinux:8192 avtab hash slots allocated. Num of rules:219513
>security:  8 users, 12 roles, 2387 types, 115 bools, 1 sens, 1024 cats
>security:  67 classes, 219513 rules
>security:  class peer not defined in policy
>security:  class capability2 not defined in policy
>security:  permission recvfrom in class node not defined in policy
>security:  permission sendto in class node not defined in policy
>security:  permission ingress in class netif not defined in policy
>security:  permission egress in class netif not defined in policy
>security:  permission setfcap in class capability not defined in policy
>security:  permission forward_in in class packet not defined in policy
>security:  permission forward_out in class packet not defined in policy
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type xfs), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1213210622.994:2): policy loaded auid=4294967295 ses=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:1: Attached scsi generic sg1 type 0
>sd 0:0:0:2: Attached scsi generic sg2 type 0
>scsi 0:0:16:0: Attached scsi generic sg3 type 3
>scsi 1:0:0:0: Attached scsi generic sg4 type 5
>EDAC MC: Ver: 2.1.0 May 22 2008
>input: Power Button (FF) as /class/input/input6
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input7
>ACPI: Power Button (CM) [PWRB]
>EDAC i82975x: ECC disabled on both channels.
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>sky2 0000:05:00.0: v1.21 addr 0xf88fc000 irq 19 Yukon-EC (0xb6) rev 2
>sky2 eth0: addr 00:18:f3:93:de:1a
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>sky2 0000:04:00.0: v1.21 addr 0xf87fc000 irq 16 Yukon-EC (0xb6) rev 2
>sky2 eth1: addr 00:18:f3:93:c9:02
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 23 (level, low) -> IRQ 23
>nvidia: module license 'NVIDIA' taints kernel.
>PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:03:00.1 to 64
>scsi9 : pata_jmicron
>scsi10 : pata_jmicron
>ata9: PATA max UDMA/100 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 18
>ata10: PATA max UDMA/100 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 18
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>input: PC Speaker as /class/input/input8
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:0a:00.0 to 64
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  173.14.05  Mon May 19 00:03:22 PDT 2008
>Linux video capture interface: v2.00
>intel_rng: FWH not detected
>ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 21
>firewire_ohci: Added fw-ohci device 0000:01:03.0, OHCI version 1.10
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ivtv:  Start initialization, version 1.2.0
>ivtv0: Initializing card #0
>ivtv0: Autodetected Hauppauge card (cx23416 based)
>ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 21 (level, low) -> IRQ 21
>tveeprom 1-0050: Hauppauge model 23559, rev D491, serial# 9526141
>tveeprom 1-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56)
>tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
>tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
>tveeprom 1-0050: audio processor is CX25843 (idx 37)
>tveeprom 1-0050: decoder processor is CX25843 (idx 30)
>tveeprom 1-0050: has radio, has no IR receiver, has no IR transmitter
>ivtv0: Autodetected WinTV PVR 500 (unit #1)
>phy0: Selected rate control algorithm 'pid'
>firewire_core: created device fw0: GUID 0011d80000eeac24, S400
>phy0: hwaddr 00:15:af:09:cb:e8, rtl8187 V1 + rtl8225z2
>usbcore: registered new interface driver rtl8187
>cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
>tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0)
>tea5767 1-0060: type set to Philips TEA5767HN FM Radio
>tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
>tda9887 1-0043: tda988[5/6/7] found
>tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
>wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
>tuner-simple 1-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4))
>cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
>ivtv0: Registered device video0 for encoder MPG (4096 kB)
>ivtv0: Registered device video32 for encoder YUV (2048 kB)
>ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
>ivtv0: Registered device video24 for encoder PCM (320 kB)
>ivtv0: Registered device radio0 for encoder radio
>ivtv0: Initialized card #0: WinTV PVR 500 (unit #1)
>ivtv1: Initializing card #1
>ivtv1: Autodetected Hauppauge card (cx23416 based)
>ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 22 (level, low) -> IRQ 22
>tveeprom 2-0050: Hauppauge model 23559, rev D491, serial# 9526141
>tveeprom 2-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56)
>tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
>tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
>tveeprom 2-0050: audio processor is CX25843 (idx 37)
>tveeprom 2-0050: decoder processor is CX25843 (idx 30)
>tveeprom 2-0050: has radio, has no IR receiver, has no IR transmitter
>ivtv1: Correcting tveeprom data: no radio present on second unit
>ivtv1: Autodetected WinTV PVR 500 (unit #2)
>cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
>tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1)
>tda9887 2-0043: tda988[5/6/7] found
>tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
>wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)
>tuner-simple 2-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4))
>cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
>ivtv1: Registered device video1 for encoder MPG (4096 kB)
>ivtv1: Registered device video33 for encoder YUV (2048 kB)
>ivtv1: Registered device vbi1 for encoder VBI (1024 kB)
>ivtv1: Registered device video25 for encoder PCM (320 kB)
>ivtv1: Initialized card #1: WinTV PVR 500 (unit #2)
>ivtv:  End initialization
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>usbcore: registered new interface driver wacom
>drivers/input/tablet/wacom_sys.c: v1.48:USB Wacom Graphire and Wacom Intuos tablet driver
>type=1400 audit(1213210642.324:3): avc:  denied  { read } for  pid=1683 comm="rhgb" name="b67b32625a2bb51b023d3814a918f351-x86-64.cache-2" dev=dm-0 ino=19817009 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=file
>type=1400 audit(1213210642.324:4): avc:  denied  { getattr } for  pid=1683 comm="rhgb" path="/var/cache/fontconfig/b67b32625a2bb51b023d3814a918f351-x86-64.cache-2" dev=dm-0 ino=19817009 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=file
>device-mapper: multipath: version 1.0.5 loaded
>Filesystem "dm-0": Disabling barriers, not supported by the underlying device
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>XFS mounting filesystem sdc1
>Ending clean XFS mount for filesystem: sdc1
>SELinux: initialized (dev sdc1, type xfs), uses xattr
>Adding 2031608k swap on /dev/mapper/Fedora8-swap.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>sky2 eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>w83627ehf: Found W83627DHG chip at 0x290
>coretemp coretemp.0: Using relative temperature scale!
>coretemp coretemp.1: Using relative temperature scale!
>warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>eth0: no IPv6 routers present
>Bridge firewalling registered
>virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>virbr0: starting userspace STP failed, starting kernel STP
>pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
>pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.0
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>virbr0: no IPv6 routers present

Actions: View

Attachments on bug 449210: 308980