Attachment 309358 Details for Bug 451232 – dmesg after hibernate

dmesg after hibernate

dmesg.txt (text/plain), 22.54 KB, created by Carlo Raudino on 2008-06-14 12:12:44 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Carlo Raudino

Created: 2008-06-14 12:12:44 UTC

Size: 22.54 KB

patch

obsolete

>pci 0000:00:1d.2: Performing full reset
>pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0030
>pci 0000:00:1d.3: Performing full reset
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>Allocate Port Service[0000:00:1c.2:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [TZ00] (57 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel 915GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 12:320:938
>debug: unmapping init memory c077f000..c080e000
>Write protecting the kernel text: 2344k
>Write protecting the kernel read-only data: 984k
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>drivers/usb/core/inode.c: creating file 'devices'
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
>ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
>ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: supports USB remote wakeup
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
>ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: default language 0x0409
>usb usb1: uevent
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>usb 1-0:1.0: uevent
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.26-0.67.rc6.git1.fc10.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>modprobe used greatest stack depth: 1852 bytes left
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd: block sizes: ed 64 td 64
>hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
>ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001403 POWER sig=k CSC CONNECT
>hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '002'
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: detected 2 ports
>uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.0: Performing full reset
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
>usb usb2: default language 0x0409
>usb usb2: uevent
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>usb 2-0:1.0: uevent
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: individual port over-current protection
>hub 2-0:1.0: power on to power good time: 2ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
>ehci_hcd 0000:00:1d.7: port 2 low speed --> companion
>drivers/usb/core/inode.c: creating file '001'
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.26-0.67.rc6.git1.fc10.i686 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '003'
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: detected 2 ports
>uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.1: Performing full reset
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
>usb usb3: default language 0x0409
>usb usb3: uevent
>usb usb3: usb_probe_device
>usb usb3: configuration #1 chosen from 1 choice
>usb usb3: adding 3-0:1.0 (config #1, interface 0)
>usb 3-0:1.0: uevent
>hub 3-0:1.0: usb_probe_interface
>hub 3-0:1.0: usb_probe_interface - got id
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hub 3-0:1.0: standalone hub
>hub 3-0:1.0: no power switching (usb 1.0)
>hub 3-0:1.0: individual port over-current protection
>hub 3-0:1.0: power on to power good time: 2ms
>hub 3-0:1.0: local power source is good
>hub 3-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
>ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 5, status 0501, change 0001, 480 Mb/s
>drivers/usb/core/inode.c: creating file '001'
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.26-0.67.rc6.git1.fc10.i686 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '004'
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: detected 2 ports
>uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.2: Performing full reset
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
>usb usb4: default language 0x0409
>usb usb4: uevent
>usb usb4: usb_probe_device
>usb usb4: configuration #1 chosen from 1 choice
>usb usb4: adding 4-0:1.0 (config #1, interface 0)
>usb 4-0:1.0: uevent
>hub 4-0:1.0: usb_probe_interface
>hub 4-0:1.0: usb_probe_interface - got id
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hub 4-0:1.0: standalone hub
>hub 4-0:1.0: no power switching (usb 1.0)
>hub 4-0:1.0: individual port over-current protection
>hub 4-0:1.0: power on to power good time: 2ms
>hub 4-0:1.0: local power source is good
>hub 4-0:1.0: trying to enable port power on non-switchable hub
>hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x501
>ehci_hcd 0000:00:1d.7: port 5 high speed
>ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT
>drivers/usb/core/inode.c: creating file '001'
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.26-0.67.rc6.git1.fc10.i686 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '005'
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: detected 2 ports
>uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.3: Performing full reset
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e880
>usb usb5: default language 0x0409
>usb usb5: uevent
>usb usb5: usb_probe_device
>usb usb5: configuration #1 chosen from 1 choice
>usb usb5: adding 5-0:1.0 (config #1, interface 0)
>usb 5-0:1.0: uevent
>hub 5-0:1.0: usb_probe_interface
>hub 5-0:1.0: usb_probe_interface - got id
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>hub 5-0:1.0: standalone hub
>hub 5-0:1.0: no power switching (usb 1.0)
>hub 5-0:1.0: individual port over-current protection
>hub 5-0:1.0: power on to power good time: 2ms
>hub 5-0:1.0: local power source is good
>hub 5-0:1.0: trying to enable port power on non-switchable hub
>usb 1-5: new high speed USB device using ehci_hcd and address 3
>ehci_hcd 0000:00:1d.7: port 5 high speed
>ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT
>drivers/usb/core/inode.c: creating file '001'
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.26-0.67.rc6.git1.fc10.i686 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04751/0xa00000
>usb 1-5: default language 0x0409
>usb 1-5: uevent
>usb 1-5: usb_probe_device
>usb 1-5: configuration #1 chosen from 1 choice
>usb 1-5: adding 1-5:1.0 (config #1, interface 0)
>usb 1-5:1.0: uevent
>drivers/usb/core/inode.c: creating file '003'
>usb 1-5: New USB device found, idVendor=0951, idProduct=1606
>usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=4
>usb 1-5: Product: UB6225
>usb 1-5: Manufacturer: ENE
>usb 1-5: SerialNumber: 146030377350
>hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0004
>hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
>uhci_hcd 0000:00:1d.0: port 2 portsc 01ab,00
>hub 2-0:1.0: port 2, status 0301, change 0003, 1.5 Mb/s
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
>hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>usb 2-2: new low speed USB device using uhci_hcd and address 2
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ahci: probe of 0000:00:1f.2 failed with error -22
>usb 2-2: skipped 1 descriptor after interface
>usb 2-2: default language 0x0409
>usb 2-2: uevent
>usb 2-2: usb_probe_device
>usb 2-2: configuration #1 chosen from 1 choice
>usb 2-2: adding 2-2:1.0 (config #1, interface 0)
>usb 2-2:1.0: uevent
>usbhid 2-2:1.0: usb_probe_interface
>usbhid 2-2:1.0: usb_probe_interface - got id
>input: Microsoft Microsoft Wheel Mouse Opticalï¿½ as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3
>input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Opticalï¿½] on usb-0000:00:1d.0-2
>drivers/usb/core/inode.c: creating file '002'
>usb 2-2: New USB device found, idVendor=045e, idProduct=0040
>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-2: Product: Microsoft Wheel Mouse Opticalï¿½
>usb 2-2: Manufacturer: Microsoft
>hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002
>uhci_hcd 0000:00:1d.2: port 1 portsc 0082,00
>hub 4-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
>hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
>hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
>usb usb3: suspend_rh (auto-stop)
>usb usb5: suspend_rh (auto-stop)
>usb usb4: suspend_rh (auto-stop)
>hub 3-0:1.0: hub_suspend
>usb usb3: bus auto-suspend
>usb usb3: suspend_rh
>hub 4-0:1.0: hub_suspend
>usb usb4: bus auto-suspend
>usb usb4: suspend_rh
>hub 5-0:1.0: hub_suspend
>usb usb5: bus auto-suspend
>usb usb5: suspend_rh
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ata_piix 0000:00:1f.2: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>ata2.00: ATA-4: SILICONMOTION SM223AC, , max UDMA/66
>ata2.00: 7815024 sectors, multi 0: LBA 
>ata2.00: configured for UDMA/66
>scsi 1:0:0:0: Direct-Access     ATA      SILICONMOTION SM n/a  PQ: 0 ANSI: 5
>sd 1:0:0:0: [sda] 7815024 512-byte hardware sectors (4001 MB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sda] 7815024 512-byte hardware sectors (4001 MB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda3 sda4
>sd 1:0:0:0: [sda] Attached SCSI disk
>modprobe used greatest stack depth: 932 bytes left
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: sda1: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 54832
>EXT3-fs: sda1: 1 orphan inode deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>type=1404 audit(1213451775.136:2): selinux=0 auid=4294967295 ses=4294967295
>Marking TSC unstable due to: TSC halts in idle.
>usb usb2: uevent
>usb 2-0:1.0: uevent
>usb 2-2: uevent
>usb 2-2:1.0: uevent
>usb usb3: uevent
>usb 3-0:1.0: uevent
>usb usb4: uevent
>usb 4-0:1.0: uevent
>usb usb5: uevent
>usb 5-0:1.0: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>usb 1-5: uevent
>usb 1-5:1.0: uevent
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input7
>ACPI: Power Button (CM) [PWRB]
>eeepc: Eee PC Hotkey Driver
>eeepc: Hotkey init flags 0x41
>eeepc: Get control methods supported: 0x101711
>ACPI: AC Adapter [AC0] (on-line)
>sd 1:0:0:0: Attached scsi generic sg0 type 0
>Initializing USB Mass Storage driver...
>usb-storage 1-5:1.0: usb_probe_interface
>usb-storage 1-5:1.0: usb_probe_interface - got id
>scsi2 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
>iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>intel_rng: FWH not detected
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
>input: PC Speaker as /devices/platform/pcspkr/input/input8
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:1990: chipset global capabilities = 0x4401
>ALSA sound/pci/hda/hda_intel.c:748: codec_mask = 0x1
>ALSA sound/pci/hda/hda_codec.c:2347: hda_codec: model 'eeepc-p701' is selected for config 1043:82a1 (ASUS Eeepc)
>ALSA sound/pci/hda/hda_codec.c:1124: Cannot find slave Front Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1124: Cannot find slave Surround Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1124: Cannot find slave Center Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1124: Cannot find slave LFE Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1124: Cannot find slave Side Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1124: Cannot find slave Headphone Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1124: Cannot find slave Speaker Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1124: Cannot find slave Mono Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1124: Cannot find slave Front Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1124: Cannot find slave Surround Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1124: Cannot find slave Center Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1124: Cannot find slave LFE Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1124: Cannot find slave Side Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1124: Cannot find slave Headphone Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1124: Cannot find slave Mono Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1124: Cannot find slave IEC958 Playback Switch, skipped
>usb-storage: device scan complete
>scsi 2:0:0:0: Direct-Access     USB2.0   CardReader SD0   0100 PQ: 0 ANSI: 0
>sd 2:0:0:0: [sdb] 3994624 512-byte hardware sectors (2045 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
>sd 2:0:0:0: [sdb] 3994624 512-byte hardware sectors (2045 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
>sd 2:0:0:0: [sdb] Attached SCSI removable disk
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>ACPI: Battery Slot [BAT0] (battery present)
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:16/input/input9
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>Clocksource tsc unstable (delta = -160745665 ns)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 93 us
>uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 93 us
>uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 93 us
>uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 93 us
>uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 93 us
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda1, internal journal
>Adding 626492k swap on /dev/sdb1.  Priority:-1 extents:1 across:626492k
>firmware: requesting intel-ucode/06-0d-08
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure.
>fuse init (API version 7.9)
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: BNEP (Ethernet Emulation) ver 1.2
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 93 us
>uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 93 us
>uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 93 us
>uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 93 us
>uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 93 us
>uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 93 us
>ALSA sound/pci/hda/hda_codec.c:725: hda_codec_cleanup_stream: NID=0x2
>ALSA sound/pci/hda/hda_codec.c:725: hda_codec_cleanup_stream: NID=0x3
>ALSA sound/pci/hda/hda_codec.c:725: hda_codec_cleanup_stream: NID=0x4
>ALSA sound/pci/hda/hda_codec.c:725: hda_codec_cleanup_stream: NID=0x2
>ALSA sound/pci/hda/hda_codec.c:725: hda_codec_cleanup_stream: NID=0x3
>ALSA sound/pci/hda/hda_codec.c:725: hda_codec_cleanup_stream: NID=0x4
>ALSA sound/pci/hda/hda_codec.c:725: hda_codec_cleanup_stream: NID=0x9
>ALSA sound/pci/hda/hda_codec.c:725: hda_codec_cleanup_stream: NID=0x9
>ALSA sound/pci/hda/hda_codec.c:725: hda_codec_cleanup_stream: NID=0x9
>ALSA sound/pci/hda/hda_codec.c:725: hda_codec_cleanup_stream: NID=0x9
>ALSA sound/pci/hda/hda_codec.c:725: hda_codec_cleanup_stream: NID=0x2
>ALSA sound/pci/hda/hda_codec.c:725: hda_codec_cleanup_stream: NID=0x3
>ALSA sound/pci/hda/hda_codec.c:725: hda_codec_cleanup_stream: NID=0x4
>ALSA sound/pci/hda/hda_codec.c:725: hda_codec_cleanup_stream: NID=0x2
>ALSA sound/pci/hda/hda_codec.c:725: hda_codec_cleanup_stream: NID=0x3
>ALSA sound/pci/hda/hda_codec.c:725: hda_codec_cleanup_stream: NID=0x4
>

Actions: View

Attachments on bug 451232: 309358