Attachment 309402 Details for Bug 244576 – console output of boot and then plugging in Panasonic camcorder

console output of boot and then plugging in Panasonic camcorder

firewire_hang.panasonic.txt (text/plain), 32.13 KB, created by Chris MacGregor on 2008-06-15 18:58:36 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Chris MacGregor

Created: 2008-06-15 18:58:36 UTC

Size: 32.13 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25.3-18.1394_patches_080531.fc9.i686 (csa@bounce.cybermato.com) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Sat May 31 12:28:38 PDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
> BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
> BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Using x86 segment limits to approximate NX protection
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524272
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   524272
>DMI 2.2 present.
>Using APIC driver default
>ACPI: RSDP 000F75E0, 0014 (r0 Nvidia)
>ACPI: RSDT 7FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 7FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 7FFF30C0, 43E7 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 7FFF0000, 0040
>ACPI: APIC 7FFF74C0, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:10 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520177
>Kernel command line: ro root=UUID=476a1a25-99e1-40ef-8f8e-757c62d90758 console=tty0 console=ttyS0,115200
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07b9000 soft=c0799000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2079.555 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>console [ttyS0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2071292k/2097088k available (2237k kernel code, 24424k reserved, 1120k data, 284k init, 1179584k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc074f000 - 0xc0796000   ( 284 kB)
>      .data : 0xc062f555 - 0xc0747800   (1120 kB)
>      .text : 0xc0400000 - 0xc062f555   (2237 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=12, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 4161.29 BogoMIPS (lpj=2080647)
>Security Framework initialized
>SELinux:  Initializing.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 20k freed
>ACPI: Core revision 20070126
>CPU0: AMD Athlon(tm) XP 2800+ stepping 00
>Total of 1 processors activated (4161.29 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>APIC calibration not consistent with PM Timer: 98ms instead of 100ms
>APIC delta adjusted to PM-Timer: 2079544 (2058456)
>Brought up 1 CPUs
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 18:49:49  Date: 06/15/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb490, last bus=3
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs *18)
>ACPI: PCI Interrupt Link [APC4] (IRQs *19)
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs *23)
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>system 00:00: ioport range 0x4000-0x407f has been reserved
>system 00:00: ioport range 0x4080-0x40ff has been reserved
>system 00:00: ioport range 0x4400-0x447f has been reserved
>system 00:00: ioport range 0x4480-0x44ff has been reserved
>system 00:00: ioport range 0x4200-0x427f has been reserved
>system 00:00: ioport range 0x4280-0x42ff has been reserved
>system 00:01: ioport range 0x5000-0x503f has been reserved
>system 00:01: ioport range 0x5500-0x553f has been reserved
>system 00:02: iomem range 0xda800-0xdbfff has been reserved
>system 00:02: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:02: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:02: iomem range 0xfc000-0xfffff could not be reserved
>system 00:02: iomem range 0x7fff0000-0x7fffffff could not be reserved
>system 00:02: iomem range 0xffff0000-0xffffffff could not be reserved
>system 00:02: iomem range 0x0-0x9ffff could not be reserved
>system 00:02: iomem range 0x100000-0x7ffeffff could not be reserved
>system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:02: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:04: ioport range 0x4d0-0x4d1 has been reserved
>PCI: Bridge: 0000:00:08.0
>  IO window: 9000-afff
>  MEM window: 0xe4000000-0xe5ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0c.0
>  IO window: b000-bfff
>  MEM window: 0xe0000000-0xe1ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: c000-cfff
>  MEM window: 0xe2000000-0xe3ffffff
>  PREFETCH window: 0x00000000c0000000-0x00000000dfffffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2636k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1213555788.820:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: ACPI0007:00 is registered as cooling_device0
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected NVIDIA nForce2 chipset
>agpgart: AGP aperture is 256M @ 0xb0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 12:822:847
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 908k
>Red Hat nash version 6.0.52 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Setting up hotplug.
>Creating block device nodes.
>Loading ehci-hcd mACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
>odule
>ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 22
>ehci_hcd 0000:00:02.2: EHCI Host Controller
>ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.2: debug port 1
>ehci_hcd 0000:00:02.2: irq 22, io mem 0xe6083000
>ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25.3-18.1394_patches_080531.fc9.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:02.2
>Loading ohci-hcd module
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 21
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: irq 21, io mem 0xe6087000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25.3-18.1394_patches_080531.fc9.i686 ohci_hcd
>usb usb2: SerialNumber: 0000:00:02.0
>ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 20
>ohci_hcd 0000:00:02.1: OHCI Host Controller
>ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:02.1: irq 20, io mem 0xe6082000
>hub 1-0:1.0: unable to enumerate USB device on port 1
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25.3-18.1394_patches_080531.fc9.i686 ohci_hcd
>usb usb3: SerialNumber: 0000:00:02.1
>Loading uhci-hcd module
>USB Universal Host Controller Interface driver v3.0
>Loading ext3 module
>Loading scsi_mod module
>SCSI subsystem initialized
>Loading sd_mod module
>usb 1-5: new high speed USB device using ehci_hcd and address 3
>Driver 'sd' needs updating - please use bus_type methods
>Loading libata module
>Loading sata_sil module
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 18
>scsi0 : sata_sil
>scsi1 : sata_sil
>ata1: SATA max UDMA/100 mmio m512@0xe5000000 tf 0xe5000080 irq 18
>ata2: SATA max UDMA/100 mmio m512@0xe5000000 tf 0xe50000c0 irq 18
>usb 1-5: configuration #1 chosen from 1 choice
>usb 1-5: New USB device found, idVendor=10df, idProduct=0500
>usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-5: Product: iAPP CR-e500
>usb 1-5: Manufacturer: IN-WIN  
>usb 1-5: SerialNumber: 9000000005A7
>usb 2-1: new full speed USB device using ohci_hcd and address 2
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata1.00: ATA-7: WDC WD4000KD-00NAB0, 01.06A01, max UDMA/133
>ata1.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/100
>usb 2-1: configuration #1 chosen from 1 choice
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 4 ports detected
>usb 2-1: New USB device found, idVendor=0451, idProduct=2046
>usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>ata2: SATA link down (SStatus 0 SControl 310)
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD4000KD-00N 01.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9<6>usb 2-1.1: new full speed USB device using ohci_hcd and address 3
> sda10 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>Waiting for driver initialization.
>usb 2-1.1: configuration #1 chosen from 1 choice
>input: ATEN 4 Port USB KVM B V1.60 as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1
>input,hidraw0: USB HID v1.00 Keyboard [ATEN 4 Port USB KVM B V1.60] on usb-0000:00:02.0-1.1
>input: ATEN 4 Port USB KVM B V1.60 as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input2
>input,hidraw1: USB HID v1.00 Mouse [ATEN 4 Port USB KVM B V1.60] on usb-0000:00:02.0-1.1
>usb 2-1.1: New USB device found, idVendor=0557, idProduct=2205
>usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1.1: Product: 4 Port USB KVM B V1.60
>usb 2-1.1: Manufacturer: ATEN
>Loading pata_amd module
>scsi2 : pata_amd
>scsi3 : pata_amd
>ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>ata3.00: ATA-7: Maxtor 6Y060P0, YAR41BW0, max UDMA/133
>ata3.00: 120103200 sectors, multi 16: LBA 
>ata3.00: configured for UDMA/133
>ata4.00: ATAPI: BENQ    DVD LS DW1655, BCHB, max UDMA/33
>ata4.00: configured for UDMA/33
>scsi 2:0:0:0: Direct-Access     ATA      Maxtor 6Y060P0   YAR4 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdb] 120103200 512-byte hardware sectors (61493 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdb] 120103200 512-byte hardware sectors (61493 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 >
>sd 2:0:0:0: [sdb] Attached SCSI disk
>scsi 3:0:0:0: CD-ROM            BENQ     DVD LS DW1655    BCHB PQ: 0 ANSI: 5
>Waiting for driver initialization.
>Loading pata_acpi module
>Waiting for driver initialization.
>Loading ata_generic module
>Trying to resume from /dev/sdb6
>No suspend signature on swap, not resuming.
>Creating root device.
>Mounting root filesystem.
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>Setting up other filesystems.
>Setting up new root fs
>no fstab.sys, mounting internal defaults
>type=1404 audit(1213555801.726:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1213555803.034:3): policy loaded auid=4294967295 ses=4294967295
>Switching to new root and running init.
>unmounting old /dev
>unmounting old /proc
>unmounting old /sys
>		Welcome to Fedora 
>		Press 'I' to enter interactive startup.
>Starting udev: [  OK  ]
>Setting hostname bounce.cybermato.com:  [  OK  ]
>No devices found
>Setting up Logical Volume Management:   No volume groups found
>[  OK  ]
>Checking filesystems
>Checking all file systems.
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda6 
>/fc9: clean, 163395/7325696 files, 1386952/7323624 blocks
>[/sbin/fsck.ext3 (1) -- /fc8] fsck.ext3 -a /dev/sda8 
>[/sbin/fsck.ext3 (2) -- /bounce] fsck.ext3 -a /dev/sdb8 
>/: recovering journal
>/: clean, 430685/2714432 files, 5067272/5425945 blocks
>/fc8: recovering journal
>/fc8: clean, 486312/7325696 files, 3533310/7323624 blocks
>[/sbin/fsck.ext3 (1) -- /fc7] fsck.ext3 -a /dev/sda5 
>/1: recovering journal
>/1: clean, 278666/7325696 files, 1778941/7323624 blocks
>[/sbin/fsck.ext3 (1) -- /home] fsck.ext3 -a /dev/sda7 
>/home: recovering journal
>/home: clean, 1213326/73007104 files, 35519839/72999352 blocks
>[/sbin/fsck.ext3 (1) -- /stuff] fsck.ext3 -a /dev/sda9 
>/misc: recovering journal
>/misc: clean, 11/1222080 files, 73476/1220932 blocks
>[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1 
>/boot1: recovering journal
>/boot1: clean, 101/24480 files, 72832/97656 blocks
>[  OK  ]
>Remounting root filesystem in read-write mode:  [  OK  ]
>Mounting local filesystems:  [  OK  ]
>Enabling local filesystem quotas:  [  OK  ]
>Enabling /etc/fstab swaps:  [  OK  ]
>Entering non-interactive startup
>iptables: Applying firewall rules: [  OK  ]
>Bringing up loopback interface:  [  OK  ]
>Bringing up interface eth0:  [  OK  ]
>Starting restorecond: [  OK  ]
>Starting system logger: [  OK  ]
>Starting NFS statd: [FAILED]
>Starting system message bus: [  OK  ]
>Loading fuse module.
>Mounting fuse control filesystem.
>Starting acpi daemon: [  OK  ]
>Starting HAL daemon: [  OK  ]
>Starting lm_sensors: loading module i2c-nforce2 asb100 w83l785ts [  OK  ]
>Starting setroubleshootd: [  OK  ]
>Starting sshd: [  OK  ]
>Starting ntpd: [  OK  ]
>Starting sendmail: [  OK  ]
>Starting sm-client: [  OK  ]
>Starting crond: [  OK  ][  OK  ]
>Starting kerneloops:[  OK  ]
>Enabling monthly Smolt checkin: [  OK  ]
>Starting atd: [  OK  ]
>Starting cups: [  OK  ]
>Starting anacron: [  OK  ]
>
>Fedora release 9 (Sulphur)
>Kernel 2.6.25.3-18.1394_patches_080531.fc9.i686 on an i686 (/dev/ttyS0)
>
>[irrelevant stuff omitted; the following is what was output when I plugged in
>the Panasonic camcorder, after dmesg -n8 && echo 255 >
>/sys/module/firewire_ohci/parameters/debug, same as I did before plugging in
>the Sony]
>
>firewire_ohci: IRQ 00000010 AR_req
>AR evt_bus_reset, generation 2
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 2, local node ID ffc1
>selfID 0: 807f0882, phy 0 [p..] S100 gc=63 +0W Lci
>selfID 0: 817f8870, phy 1 [-c.] S400 gc=63 +0W Lc
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 3, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>AR evt_bus_reset, generation 3
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>AR evt_bus_reset, generation 4
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 4, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>AR evt_bus_reset, generation 5
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 5, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 6, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>AR evt_bus_reset, generation 6
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>AR evt_bus_reset, generation 7
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 7, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>AR evt_bus_reset, generation 8
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 8, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 9, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>AR evt_bus_reset, generation 9
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>firewire_ohci: IRQ 00010000 selfID
>AR evt_bus_reset, generation 10
>firewire_ohci: 2 selfIDs, generation 10, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>AR evt_bus_reset, generation 11
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 11, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 12, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>AR evt_bus_reset, generation 12
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>AR evt_bus_reset, generation 13
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 13, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>AR evt_bus_reset, generation 14
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 14, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 15, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>AR evt_bus_reset, generation 15
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>AR evt_bus_reset, generation 16
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 16, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>AR evt_bus_reset, generation 17
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 17, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 18, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>AR evt_bus_reset, generation 18
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>AR evt_bus_reset, generation 19
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 19, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>AR evt_bus_reset, generation 20
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 20, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>AR evt_bus_reset, generation 21
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 21, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 22, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>AR evt_bus_reset, generation 22
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>firewire_ohci: IRQ 00010000 selfID
>AR evt_bus_reset, generation 23
>firewire_ohci: 2 selfIDs, generation 23, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>AR evt_bus_reset, generation 24
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 24, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 25, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>AR evt_bus_reset, generation 25
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>AR evt_bus_reset, generation 26
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 26, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>AR evt_bus_reset, generation 27
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 27, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 28, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>AR evt_bus_reset, generation 28
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>AR evt_bus_reset, generation 29
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 29, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>AR evt_bus_reset, generation 30
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 30, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 31, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>AR evt_bus_reset, generation 31
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>AR evt_bus_reset, generation 32
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 32, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>AR evt_bus_reset, generation 33
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 33, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>AR evt_bus_reset, generation 34
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 34, local node ID ffc1
>selfID 0: 807f0880, phy 0 [p..] S100 gc=63 +0W Lc
>selfID 0: 817f8872, phy 1 [-c.] S400 gc=63 +0W Lci
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_ohci: IRQ 00000010 AR_req
>AR evt_bus_reset, generation 35
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 35, local node ID ffc0
>selfID 0: 807f8862, phy 0 [-p.] S400 gc=63 +0W Lci
>selfID 0: 817f08c0, phy 1 [c..] S100 gc=63 +0W Lc
>firewire_ohci: IRQ 00000010 AR_req
>AR evt_bus_reset, generation 36
>firewire_ohci: IRQ 00010000 selfID
>firewire_ohci: 2 selfIDs, generation 36, local node ID ffc0
>selfID 0: 806c8860, phy 0 [-p.] S400 gc=44 +0W Lc
>selfID 0: 816c08c2, phy 1 [c..] S100 gc=44 +0W Lci
>
>[the system is still alive at this point, and stayed that way]

Actions: View

Attachments on bug 244576: 307285 | 307286 | 307296 | 309401 | 309402