Attachment 309758 Details for Bug 447050 – dmesg

dmesg

dmesg.txt (text/plain), 16.90 KB, created by Miroslav Pragl on 2008-06-18 16:34:02 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Miroslav Pragl

Created: 2008-06-18 16:34:02 UTC

Size: 16.90 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.25.6-55.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Tue Jun 10 16:27:49 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
> BIOS-e820: 000000001fff0000 - 000000001ffff000 (ACPI data)
> BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 131056) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   131056
>  HighMem    131056 ->   131056
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   131056
>On node 0 totalpages: 131056
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 991 pages used for memmap
>  Normal zone: 125969 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F52C0, 0014 (r0 ACPIAM)
>ACPI: RSDT 1FFF0000, 002C (r1 A M I  OEMRSDT   2000622 MSFT       97)
>ACPI: FACP 1FFF0200, 0081 (r2 A M I  OEMFACP   2000622 MSFT       97)
>ACPI: DSDT 1FFF0300, 2087 (r1  AMIBI AMIBI002        2 INTL  2002026)
>ACPI: FACS 1FFFF000, 0040
>ACPI: OEMB 1FFFF040, 0053 (r1 A M I  OEMBIOS   2000622 MSFT       97)
>ACPI: PM-Timer IO Port: 0x408
>Allocating PCI resources starting at 30000000 (gap: 20000000:dffc0000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130033
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet noreplace-paravirt
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffb000 (0140d000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07b8000 soft=c0798000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 1212.286 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 511244k/524224k available (2234k kernel code, 12312k reserved, 1119k data, 284k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xe0800000 - 0xff3fe000   ( 491 MB)
>    lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
>      .init : 0xc074e000 - 0xc0795000   ( 284 kB)
>      .data : 0xc062e8b5 - 0xc0746800   (1119 kB)
>      .text : 0xc0400000 - 0xc062e8b5   (2234 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 2847.35 BogoMIPS (lpj=1423679)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 20k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0a00)
>CPU0: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=3696 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 18:21:10  Date: 06/18/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
>* this clock source is slow. Consider trying other clock sources
>pci 0000:00:07.3: quirk: region 0400-043f claimed by PIIX4 ACPI
>pci 0000:00:07.3: quirk: region 0440-044f claimed by PIIX4 SMB
>PCI: 0000:00:0c.0: class 401 doesn't match header type 01. Ignoring class.
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
> 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:0c.0 BAR 8 (0x0-0xfffff), disabling
> 00:0d: mem resource (0xc0000-0xdffff) overlaps 0000:00:0c.0 BAR 8 (0x0-0xfffff), disabling
> 00:0d: mem resource (0xe0000-0xfffff) overlaps 0000:00:0c.0 BAR 8 (0x0-0xfffff), disabling
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 7 of bridge 0000:00:0c.0
>PCI: Cannot allocate resource region 8 of bridge 0000:00:0c.0
>PCI: Cannot allocate resource region 9 of bridge 0000:00:0c.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
>system 00:0c: ioport range 0x400-0x43f has been reserved
>system 00:0c: ioport range 0x370-0x371 has been reserved
>system 00:0c: ioport range 0x440-0x44f has been reserved
>system 00:0c: iomem range 0x0-0x0 could not be reserved
>system 00:0c: iomem range 0x0-0x0 could not be reserved
>system 00:0d: iomem range 0x100000-0x1fffffff could not be reserved
>system 00:0d: iomem range 0xfffc0000-0xffffffff could not be reserved
>PM-Timer running at invalid rate: 153% of normal - aborting.
>PCI: not setting up bridge 0000:00:0c.0 for bus 1
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3234k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1213813270.724:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:00.0: Limiting direct PCI/PCI transfers
>pci 0000:00:08.0: Boot video device
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>isapnp: Scanning for PnP cards...
>isapnp: checksum for device 1 is not valid (0x89)
>isapnp: checksum for device 2 is not valid (0xbe)
>isapnp: Card 'Sound Blaster 16'
>isapnp: Card 'Game Port'
>isapnp: 2 Plug & Play cards detected total
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a TI16750
>Clocksource tsc unstable (delta = 117310483 ns)
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a TI16750
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a TI16750
>00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a TI16750
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 12:85:393
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 908k
>trackpoint.c: failed to get extended button data
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ata_piix 0000:00:07.1: version 2.12
>PCI: Setting latency timer of device 0000:00:07.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>ata1.00: ATA-0: Virtual HD, 1. 1, max MWDMA2
>ata1.00: 33554304 sectors, multi 128: LBA 
>ata1.00: configured for MWDMA2
>ata1.00: configured for MWDMA2
>ata1: EH complete
>ata2.00: ATAPI: Virtual CD, , max MWDMA2
>ata2.00: configured for MWDMA2
>scsi 0:0:0:0: Direct-Access     ATA      Virtual HD       1. 1 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 33554304 512-byte hardware sectors (17180 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 33554304 512-byte hardware sectors (17180 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            MS       C/DVD-ROM        3.0  PQ: 0 ANSI: 5
>IBM TrackPoint firmware: 0x01, buttons: 0/0
>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input2
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1213813278.668:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux:8192 avtab hash slots allocated. Num of rules:169015
>SELinux:8192 avtab hash slots allocated. Num of rules:169015
>security:  8 users, 12 roles, 2324 types, 113 bools, 1 sens, 1024 cats
>security:  72 classes, 169015 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1213813280.672:3): policy loaded auid=4294967295 ses=4294967295
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>input: PC Speaker as /devices/platform/pcspkr/input/input3
>Linux Tulip driver version 1.1.15 (Feb 27, 2007)
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>tulip0:  EEPROM default media type 100baseTx-FDX.
>tulip0:  Index #0 - Media 100baseTx (#3) described by a 21140 non-MII (0) block.
>tulip0:  Index #1 - Media 100baseTx-FDX (#5) described by a 21140 non-MII (0) block.
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>ACPI: Power Button (FF) [PWRF]
>eth0: Digital DS21140 Tulip rev 32 at MMIO 0xfebff000, 00:03:ff:ca:b7:91, IRQ 11.
>Console: switching to colour frame buffer device 80x30
>fb0: S3 Trio32 on 0000:00:08.0, 4 MB RAM, 14 MHz MCLK
>piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is an 82078.
>parport_pc 00:0a: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
>ns558 01:02.00: activated
>gameport: NS558 PnP Gameport is pnp01:02.00/gameport0, io 0x201, speed 218kHz
>udev: renamed network interface eth0 to eth1
>ppdev: user-space parallel port driver
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>microcode: CPU0 updated from revision 0x0 to 0x0 failed
>NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
>DECnet: Routing cache hash table of 1024 buckets, 8Kbytes
>NET: Registered protocol family 12
>eth0: Using EEPROM-set media 100baseTx-FDX.
>warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure.
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>eth0: no IPv6 routers present
>type=1400 audit(1213806153.588:4): avc:  denied  { getattr } for  pid=1917 comm="lnusertemp" path="/root/.kde/tmp-mirek-nb-virt.home.intranet" dev=dm-0 ino=408306 scontext=system_u:system_r:xdm_t:s0-s0:c0.c1023 tcontext=unconfined_u:object_r:admin_home_t:s0 tclass=lnk_file
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>type=1400 audit(1213806171.150:5): avc:  denied  { write } for  pid=2057 comm="pam_timestamp_c" path="/root/.xsession-errors" dev=dm-0 ino=408284 scontext=unconfined_u:unconfined_r:pam_t:s0-s0:c0.c1023 tcontext=unconfined_u:object_r:admin_home_t:s0 tclass=file
>type=1400 audit(1213806171.922:6): avc:  denied  { getattr } for  pid=2069 comm="nm-system-setti" path="/dev/root" dev=tmpfs ino=289 scontext=system_u:system_r:NetworkManager_t:s0-s0:c0.c1023 tcontext=system_u:object_r:fixed_disk_device_t:s0 tclass=blk_file
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
>SELinux: initialized (dev fd0, type vfat), uses genfs_contexts

Actions: View

Attachments on bug 447050: 309758