Attachment 309867 Details for Bug 219639 – dmesg.log

dmesg.log

dmesg.log (text/plain), 17.71 KB, created by Flavio Leitner on 2008-06-19 18:04:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Flavio Leitner

Created: 2008-06-19 18:04:57 UTC

Size: 17.71 KB

patch

obsolete

>Bootdata ok (command line is ro root=LABEL=/ rhgb quiet)
>Linux version 2.6.9-72.ELsmp (brewbuilder@hs20-bc1-5.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-9)) #1 SMP Tue Jun 3 16:32:03 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000d7e50000 (usable)
> BIOS-e820: 00000000d7e50000 - 00000000d7e64000 (ACPI data)
> BIOS-e820: 00000000d7e64000 - 00000000d7e65000 (ACPI NVS)
> BIOS-e820: 00000000d7e65000 - 00000000d8000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
>ACPI: RSDP (v002 NEC                                   ) @ 0x00000000000f7280
>ACPI: XSDT (v001 PTLTD  	 XSDT   0x06040000  LTP 0x00000000) @ 0x00000000d7e5acea
>ACPI: FADT (v003 INTEL           0x06040000 PTL  0x00000002) @ 0x00000000d7e63d0c
>ACPI: TCPA (v001 Phoeni  x       0x06040000 TL  0x00000000) @ 0x00000000d7e63e00
>ACPI: DMAR (v001 Intel  OEMDMAR  0x06040000 LOHR 0x00000001) @ 0x00000000d7e63e32
>ACPI: MADT (v001 NEC    	 APIC   0x06040000 NEC  0x00000000) @ 0x00000000d7e63ec2
>ACPI: MCFG (v001 PTLTD    MCFG   0x06040000  LTP 0x00000000) @ 0x00000000d7e63f34
>ACPI: HPET (v001 PTLTD  HPETTBL  0x06040000  LTP 0x00000001) @ 0x00000000d7e63f70
>ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x00000000d7e63fa8
>ACPI: BERT (v001 PTL    WHEAPTL  0x06040000 PTL  0x00000001) @ 0x00000000d7e63fd0
>ACPI: SSDT (v001  PmRef  Cpu0Tst 0x00003000 INTL 0x20050228) @ 0x00000000d7e5c211
>ACPI: SSDT (v001  PmRef  Cpu1Tst 0x00003000 INTL 0x20050228) @ 0x00000000d7e5c16b
>ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050228) @ 0x00000000d7e5ad66
>ACPI: DSDT (v001  INTEL B_LAKE-X 0x06040000 MSFT 0x03000001) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000140000000
>Bootmem setup node 0 0000000000000000-0000000140000000
>On node 0 totalpages: 1146349
>  DMA zone: 3997 pages, LIFO batch:1
>  Normal zone: 1142352 pages, LIFO batch:16
>  HighMem zone: 0 pages, LIFO batch:1
>DMI present.
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 16
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>Setting APIC routing to flat
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ11 used by override.
>ACPI: HPET id: 0xffffffff base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at f1000000 (gap: f0000000:ec00000)
>Checking aperture...
>Built 1 zonelists
>Kernel command line: ro root=LABEL=/ rhgb quiet console=tty0
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 14.318180 MHz HPET timer.
>time.c: Detected 2327.504 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Placing software IO TLB between 0x1ca5000 - 0x5ca5000
>Memory: 4429032k/5242880k available (2161k kernel code, 0k reserved, 1352k data, 208k init)
>Calibrating delay using timer specific routine.. 4658.21 BogoMIPS (lpj=2329107)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>using mwait in idle threads.
>CPU0: Physical Processor ID: 0
>CPU0: Processor Core ID: 0
>CPU0: Initial APIC ID: 0
>ACPI: System reset via FADT Reset Register is supported
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU0: Physical Processor ID: 0
>CPU0: Processor Core ID: 0
>CPU0: Initial APIC ID: 0
>CPU0: Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz stepping 0b
>per-CPU timeslice cutoff: 4095.16 usecs.
>task migration cache decay timeout: 4 msecs.
>Booting processor 1/1 rip 6000 rsp 10037e85f58
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4654.99 BogoMIPS (lpj=2327495)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU1: Physical Processor ID: 0
>CPU1: Processor Core ID: 1
>CPU1: Initial APIC ID: 1
>Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz stepping 0b
>Total of 2 processors activated (9313.20 BogoMIPS).
>activating NMI Watchdog ... done.
>testing NMI watchdog ... OK.
>Using local APIC timer interrupts.
>Detected 20.781 MHz APIC timer.
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>time.c: Using HPET/TSC based timekeeping.
>checking if image is initramfs... it is
>NET: Registered protocol family 16
>PCI: Using configuration type 1
>PCI: Using MMCONFIG at e0000000
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20040816
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>xen_mem: Initialising balloon driver.
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 16 (level, low) -> IRQ 169
>GSI 17 sharing vector 0xB1 and IRQ 17
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 177
>GSI 18 sharing vector 0xB9 and IRQ 18
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 185
>GSI 19 sharing vector 0xC1 and IRQ 19
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 193
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
>GSI 20 sharing vector 0xC9 and IRQ 20
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 201
>GSI 21 sharing vector 0xD1 and IRQ 21
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 209
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 177
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 185
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 193
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 177
>GSI 22 sharing vector 0xD9 and IRQ 22
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 217
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 217
>ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 18 (level, low) -> IRQ 201
>ACPI: PCI Interrupt 0000:00:1f.6[A] -> GSI 16 (level, low) -> IRQ 169
>ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 18 (level, low) -> IRQ 201
>ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 19 (level, low) -> IRQ 209
>ACPI: PCI Interrupt 0000:0d:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Simple Boot Flag at 0x43 set to 0x1
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1213800294.400:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key CB8E7A46B2962BCC
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports C1)
>ACPI: Processor [CPU1] (supports C1)
>Real Time Clock Driver v1.12
>Linux agpgart interface v0.100 (c) Dave Jones
>i8042.c: Warning: Keylock active.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>Probing IDE interface ide2...
>Probing IDE interface ide3...
>Probing IDE interface ide4...
>Probing IDE interface ide5...
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>input: AT Raw Set 2 keyboard on isa0060/serio0
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP: Hash tables configured (established 262144 bind 262144)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI wakeup devices: 
>PEG1 PEG2  LAN USB4 USB5 USB7 ESB2 EXP1 EXP2 EXP3 EXP4 EXP5 EXP6 USB1 USB2 USB3 USB6 ESB1 PCIB COMA COMB PWRB 
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 208k freed
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ata_piix 0000:00:1f.2: version 2.00ac7
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x1C20 ctl 0x1C16 bmdma 0x1C00 irq 217
>ata2: SATA max UDMA/133 cmd 0x1C18 ctl 0x1C12 bmdma 0x1C08 irq 217
>scsi0 : ata_piix
>ata1.00: ATA-7, max UDMA/133, 156250080 sectors: LBA48 NCQ (depth 0/32)
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/133
>scsi1 : ata_piix
>Using cfq io scheduler
>  Vendor: ATA       Model: WDC WD800JD-19MS  Rev: 10.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 156250080 512-byte hdwr sectors (80000 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 156250080 512-byte hdwr sectors (80000 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4 < sda5 >
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
>ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 18 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ata3: SATA max UDMA/133 cmd 0x1C78 ctl 0x1C2E bmdma 0x1C60 irq 201
>ata4: SATA max UDMA/133 cmd 0x1C70 ctl 0x1C2A bmdma 0x1C68 irq 201
>scsi2 : ata_piix
>scsi3 : ata_piix
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>inserting floppy driver for 2.6.9-72.ELsmp
>floppy0: no floppy controllers found
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:0d:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:0d:00.0 to 64
>e1000: 0000:0d:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1a:4d:51:a1:bf
>divert: allocating divert_blk for eth0
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
>e1000e: Copyright (c) 1999-2007 Intel Corporation.
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>divert: allocating divert_blk for eth1
>pci0000:00: eth1: (PCI Express:2.5GB/s:Width x1) 00:1a:4d:51:a1:be
>pci0000:00: eth1: Intel(R) PRO/1000 Network Connection
>pci0000:00: eth1: MAC: 5, PHY: 6, PBA No: ffffff-0ff
>hw_random hardware driver 1.0.0 loaded
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 193
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: irq 193, pci mem ffffff0000030800
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 177
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: irq 177, pci mem ffffff0000032c00
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>USB Universal Host Controller Interface driver v2.2
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 177
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: irq 177, io base 0000000000001860
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 185
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: irq 185, io base 0000000000001880
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 177
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: irq 177, io base 00000000000018a0
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 185
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: irq 185, io base 00000000000018c0
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 193
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: irq 193, io base 00000000000018e0
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>usb 5-1: new full speed USB device using address 2
>input: USB HID v1.11 Keyboard [ServerEngines SE USB Device] on usb-0000:00:1d.0-1
>input: USB HID v1.11 Mouse [ServerEngines SE USB Device] on usb-0000:00:1d.0-1
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device ffffffff80419700(lo)
>IPv6 over IPv4 tunneling driver
>divert: not allocating divert_blk for non-ethernet device sit0
>ACPI: Power Button (FF) [PWRF]
>EXT3 FS on sda2, internal journal
>device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
>device-mapper: dm-multipath version 1.0.5 loaded
>device-mapper: dm-linear: Device lookup failed
>device-mapper: error adding target to table
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2096472k swap on /dev/sda3.  Priority:-1 extents:1
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: CPU0 updated from revision 0xb3 to 0xb6, date = 07132007 
>microcode: CPU1 updated from revision 0xb3 to 0xb6, date = 07132007 
>IA-32 Microcode Update Driver v1.14 unregistered
>NET: Registered protocol family 27
>Linux Kernel Card Services
>  options:  [pci] [cardbus] [pm]
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>MSI INIT SUCCESS
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>i2c /dev entries driver
>lp: driver loaded but no devices found
>eth0: no IPv6 routers present
>disk_dump: Maximum block size: 524288
>disk_dump: total blocks required: 1146392 (header 3 + bitmap 40 + memory 1146349)

Actions: View

Attachments on bug 219639: 296089 | 309867