Attachment 309979 Details for Bug 450401 – dmesg with kernel errors after inserting rt2500 card

dmesg with kernel errors after inserting rt2500 card

dmesg (text/plain), 23.87 KB, created by Bob Hockney on 2008-06-21 17:35:04 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bob Hockney

Created: 2008-06-21 17:35:04 UTC

Size: 23.87 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.25.4-10.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Thu May 22 23:34:09 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
> BIOS-e820: 000000001ff70000 - 000000001ff7fc00 (ACPI data)
> BIOS-e820: 000000001ff7fc00 - 000000001ff80000 (ACPI NVS)
> BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>Scan SMP from c009f400 for 1024 bytes.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 130928) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   130928
>  HighMem    130928 ->   130928
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   130928
>On node 0 totalpages: 130928
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 990 pages used for memmap
>  Normal zone: 125842 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F6440, 0014 (r0 PTLTD )
>ACPI: RSDT 1FF78B27, 002C (r1 GATEWA SOLO9550 20010320  LTP        0)
>ACPI: FACP 1FF7FB64, 0074 (r1 GATEWA SOLO9550 20010320 PTL         1)
>ACPI: DSDT 1FF78B53, 7011 (r1 GATEWA SOLO9550 20010320 MSFT  100000B)
>ACPI: FACS 1FF7FFC0, 0040
>ACPI: BOOT 1FF7FBD8, 0028 (r1 GATEWA SOLO9550 20010320  LTP        1)
>ACPI: PM-Timer IO Port: 0x1008
>Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129906
>Kernel command line: ro maxcpus=0 root=LABEL=/f8 vga=0x305 
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffb000 (0140d000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07bc000 soft=c079c000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 1063.141 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 511096k/523712k available (2231k kernel code, 12008k reserved, 1142k data, 280k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xe0800000 - 0xff3fe000   ( 491 MB)
>    lowmem  : 0xc0000000 - 0xdff70000   ( 511 MB)
>      .init : 0xc0753000 - 0xc0799000   ( 280 kB)
>      .data : 0xc062de58 - 0xc074ba28   (1142 kB)
>      .text : 0xc0400000 - 0xc062de58   (2231 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 2127.63 BogoMIPS (lpj=1063818)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 512K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 20k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0420)
>CPU0: Intel(R) Pentium(R) III Mobile CPU      1066MHz stepping 01
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=3696 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  9:40:36  Date: 06/21/08
>NET: Registered protocol family 16
>ACPI: ACPI Dock Station Driver 
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd96b, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 10) *0, disabled.
>ACPI: Power Resource [PFN0] (off)
>ACPI: Power Resource [PFN1] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>system 00:01: ioport range 0x1000-0x107f has been reserved
>system 00:01: ioport range 0x1180-0x11bf has been reserved
>system 00:01: ioport range 0xfe00-0xfe00 has been reserved
>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
>system 00:01: ioport range 0x600-0x60f has been reserved
>system 00:01: ioport range 0x610-0x61f has been reserved
>system 00:01: iomem range 0xfff00000-0xffffffff could not be reserved
>system 00:01: iomem range 0x0-0x9ffff could not be reserved
>system 00:01: iomem range 0xe0000-0xfffff could not be reserved
>system 00:01: iomem range 0xcf000-0xcf7ff has been reserved
>system 00:01: iomem range 0x100000-0x1fffffff could not be reserved
>PCI: Failed to allocate mem resource #6:10000@f8000000 for 0000:01:00.0
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: 0xe1000000-0xe1ffffff
>  PREFETCH window: 0x00000000f0000000-0x00000000f7ffffff
>PCI: Bus 3, cardbus bridge: 0000:02:07.0
>  IO window: 0x00003000-0x000030ff
>  IO window: 0x00003400-0x000034ff
>  PREFETCH window: 0x30000000-0x33ffffff
>  MEM window: 0x3c000000-0x3fffffff
>PCI: Bus 7, cardbus bridge: 0000:02:07.1
>  IO window: 0x00003800-0x000038ff
>  IO window: 0x00003c00-0x00003cff
>  PREFETCH window: 0x34000000-0x37ffffff
>  MEM window: 0x40000000-0x43ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 3000-4fff
>  MEM window: 0xe2000000-0xe25fffff
>  PREFETCH window: 0x0000000030000000-0x0000000037ffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI Interrupt 0000:02:07.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 2972k freed
>Simple Boot Flag at 0x35 set to 0x1
>speedstep: frequency transition measured seems out of range (4800 nSec), falling back to a safe one of 500000 nSec.
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1214041236.725:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 46A518549A1EA9A4
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xf0000000, mapped to 0xe0880000, using 1536k, total 32768k
>vesafb: mode is 1024x768x8, linelength=1024, pages=3
>vesafb: protected mode interface info at c000:e2f0
>vesafb: pmi: set display start = c00ce335, set palette = c00ce3ba
>vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03 
>vesafb: scrolling: redraw
>vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
>fbcon: VESA VGA (fb0) is primary device
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>ACPI: Transitioning device [FAN0] to D3
>ACPI: PNP0C0B:00 is registered as cooling_device0
>ACPI: Fan [FAN0] (off)
>ACPI: Transitioning device [FAN1] to D3
>ACPI: PNP0C0B:01 is registered as cooling_device1
>ACPI: Fan [FAN1] (off)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:00 is registered as cooling_device2
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (48 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel 830M Chipset.
>agpgart: AGP aperture is 128M @ 0xe8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>brd: module loaded
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:02:07.0 [107b:9550]
>Yenta: Enabling burst memory read transactions
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:07.0, mfunc 0x00000102, devctl 0x64
>Yenta: ISA IRQ mask 0x08b8, PCI irq 10
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x4fff
>cs: IO port probe 0x3000-0x4fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xe2000000 - 0xe25fffff
>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff
>Yenta: CardBus bridge found at 0000:02:07.1 [107b:9550]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:07.1, mfunc 0x00000102, devctl 0x64
>Yenta: ISA IRQ mask 0x08b8, PCI irq 10
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x4fff
>cs: IO port probe 0x3000-0x4fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xe2000000 - 0xe25fffff
>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 12:662:677
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 924k
>Marking TSC unstable due to: TSC halts in idle.
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25.4-10.fc8 uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001820
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 5.6, id: 0x9e44b1, caps: 0x944713/0x2000
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25.4-10.fc8 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>uhci_hcd 0000:00:1d.2: irq 5, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25.4-10.fc8 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.2
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.1: version 2.12
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
>ata1.00: ATA-6: WDC WD800VE-75HDT0, 09.07D09, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA 
>ata1.01: ATA-5: TOSHIBA MK2018GAP, M1.42 A, max UDMA/100
>ata1.01: 39070080 sectors, multi 16: LBA 
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/100
>ata2.00: ATAPI: UJDA340, 1.50, max MWDMA2
>ata2.00: configured for MWDMA2
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD800VE-75HD 09.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 0:0:1:0: Direct-Access     ATA      TOSHIBA MK2018GA M1.4 PQ: 0 ANSI: 5
>sd 0:0:1:0: [sdb] 39070080 512-byte hardware sectors (20004 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:1:0: [sdb] 39070080 512-byte hardware sectors (20004 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3
> sdb1: <bsd: sdb5 sdb6 sdb7 sdb8 sdb9 >
> sdb3: <netbsd: sdb10 sdb11 sdb12 sdb13 sdb14bad subpartition - ignored
> >
>sd 0:0:1:0: [sdb] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            MATSHITA UJDA340          1.50 PQ: 0 ANSI: 5
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>Clocksource tsc unstable (delta = -83150947 ns)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>scsi 1:0:0:0: Attached scsi generic sg2 type 5
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>intel_rng: FWH not detected
>input: PC Speaker as /class/input/input3
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>iTCO_wdt: No card detected
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>parport_pc 00:08: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
>e100: eth0: e100_probe: addr 0xe2006000, irq 10, MAC addr 00:e0:b8:3c:5e:37
>ACPI: PCI Interrupt 0000:02:07.2[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>firewire_ohci: Added fw-ohci device 0000:02:07.2, OHCI version 1.0
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Battery Slot [BAT2] (battery absent)
>ACPI: AC Adapter [ACAD] (on-line)
>firewire_core: created device fw0: GUID 00e0b800003f6b77, S400
>input: Video Bus as /class/input/input7
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>ACPI: \_SB_.PCI0.IDE0.SECN.DBAY: found ejectable bay
>ACPI: \_SB_.PCI0.IDE0.SECN.DBAY: Adding notify handler
>ACPI: Error installing bay notify handler
>ACPI: Bay [\_SB_.PCI0.IDE0.SECN.DBAY] Added
>ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>MC'97 0 converters and GPIO not ready (0xff00)
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>EXT3 FS on sda11, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1028120k swap on /dev/sda5.  Priority:-1 extents:1 across:1028120k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
>pccard: CardBus card inserted into slot 1
>PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:07:00.0 to 64
>phy0: Selected rate control algorithm 'pid'
>Registered led device: rt2500pci-phy0:radio
>BUG: sleeping function called from invalid context at kernel/mutex.c:87
>in_atomic():1, irqs_disabled():0
>Pid: 2258, comm: ip Not tainted 2.6.25.4-10.fc8 #1
> [<c041e2f9>] __might_sleep+0xb3/0xba
> [<c062970c>] mutex_lock+0x18/0x2d
> [<c05c2c38>] rtnl_lock+0xd/0xf
> [<e0cd8270>] ieee80211_iterate_active_interfaces+0x15/0x75 [mac80211]
> [<e0c29db3>] ? rt2x00lib_beacondone_iter+0x0/0x29 [rt2x00lib]
> [<e0c29728>] rt2x00lib_beacondone+0x1e/0x32 [rt2x00lib]
> [<e0c342fd>] rt2500pci_interrupt+0x44/0xbf [rt2500pci]
> [<c045ae87>] handle_IRQ_event+0x2a/0x5a
> [<c045c25f>] handle_level_irq+0x79/0xbe
> [<c045c1e6>] ? handle_level_irq+0x0/0xbe
> [<c0407eb3>] do_IRQ+0x8c/0xb9
> [<c040656f>] common_interrupt+0x23/0x28
> [<e0cc477f>] ? __ieee80211_if_config+0x0/0xde [mac80211]
> [<e0cc4904>] ? ieee80211_if_config+0x43/0x45 [mac80211]
> [<e0cc5cf4>] ieee80211_open+0x30d/0x43c [mac80211]
> [<c05bbdd7>] dev_open+0x42/0x74
> [<c05bab0a>] dev_change_flags+0x9a/0x148
> [<c05f6c7f>] devinet_ioctl+0x211/0x50a
> [<c05f72ea>] inet_ioctl+0x8c/0xa8
> [<c05b057b>] sock_ioctl+0x1b8/0x1d9
> [<c05b03c3>] ? sock_ioctl+0x0/0x1d9
> [<c048acce>] vfs_ioctl+0x22/0x67
> [<c048af75>] do_vfs_ioctl+0x262/0x279
> [<c04d016e>] ? selinux_file_ioctl+0xa8/0xab
> [<c048afcc>] sys_ioctl+0x40/0x5c
> [<c0405b7a>] syscall_call+0x7/0xb
> =======================
>BUG: scheduling while atomic: ip/2258/0x00010000
>
>Pid: 2258, comm: ip Not tainted (2.6.25.4-10.fc8 #1)
>EIP: 0060:[<e0cc477f>] EFLAGS: 00200246 CPU: 0
>EIP is at __ieee80211_if_config+0x0/0xde [mac80211]
>EAX: df29c000 EBX: 00000000 ECX: 00000000 EDX: 00000000
>ESI: dee761a0 EDI: df29c500 EBP: deefae5c ESP: deefae58
> DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
>CR0: 8005003b CR2: 0020dc10 CR3: 1ef7a000 CR4: 000006d0
>DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
>DR6: ffff0ff0 DR7: 00000400
> [<e0cc4904>] ? ieee80211_if_config+0x43/0x45 [mac80211]
> [<e0cc5cf4>] ieee80211_open+0x30d/0x43c [mac80211]
> [<c05bbdd7>] dev_open+0x42/0x74
> [<c05bab0a>] dev_change_flags+0x9a/0x148
> [<c05f6c7f>] devinet_ioctl+0x211/0x50a
> [<c05f72ea>] inet_ioctl+0x8c/0xa8
> [<c05b057b>] sock_ioctl+0x1b8/0x1d9
> [<c05b03c3>] ? sock_ioctl+0x0/0x1d9
> [<c048acce>] vfs_ioctl+0x22/0x67
> [<c048af75>] do_vfs_ioctl+0x262/0x279
> [<c04d016e>] ? selinux_file_ioctl+0xa8/0xab
> [<c048afcc>] sys_ioctl+0x40/0x5c
> [<c0405b7a>] syscall_call+0x7/0xb
> =======================

Actions: View

Attachments on bug 450401: 309399 | 309979 | 311195