Attachment 310402 Details for Bug 453058 – dmesg output immediately after booting

dmesg output immediately after booting

dmesg.txt (text/plain), 23.93 KB, created by Paul Howarth on 2008-06-26 23:56:27 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Paul Howarth

Created: 2008-06-26 23:56:27 UTC

Size: 23.93 KB

patch

obsolete

>Linux version 2.6.18-92.1.1.el5 (mockbuild@builder16.centos.org) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-42)) #1 SMP Sat Jun 21 19:04:27 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
> BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003e5a1000 (usable)
> BIOS-e820: 000000003e5a1000 - 000000003e6cc000 (ACPI NVS)
> BIOS-e820: 000000003e6cc000 - 000000003f574000 (usable)
> BIOS-e820: 000000003f574000 - 000000003f57c000 (reserved)
> BIOS-e820: 000000003f57c000 - 000000003f62d000 (usable)
> BIOS-e820: 000000003f62d000 - 000000003f631000 (reserved)
> BIOS-e820: 000000003f631000 - 000000003f6a7000 (usable)
> BIOS-e820: 000000003f6a7000 - 000000003f6e9000 (ACPI NVS)
> BIOS-e820: 000000003f6e9000 - 000000003f6ee000 (usable)
> BIOS-e820: 000000003f6ee000 - 000000003f6ff000 (ACPI data)
> BIOS-e820: 000000003f6ff000 - 000000003f700000 (usable)
> BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>119MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000fe200
>Memory for crash kernel (0x0 to 0x0) notwithin permissible range
>disabling kdump
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 259840
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 30464 pages, LIFO batch:7
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP (v000 INTEL                                 ) @ 0x000fe020
>ACPI: RSDT (v001 INTEL  D946GZIS 0x00000056      0x01000013) @ 0x3f6fd038
>ACPI: FADT (v001 INTEL  D946GZIS 0x00000056 MSFT 0x01000013) @ 0x3f6fc000
>ACPI: MADT (v001 INTEL  D946GZIS 0x00000056 MSFT 0x01000013) @ 0x3f6f6000
>ACPI: WDDT (v001 INTEL  D946GZIS 0x00000056 MSFT 0x01000013) @ 0x3f6f5000
>ACPI: MCFG (v001 INTEL  D946GZIS 0x00000056 MSFT 0x01000013) @ 0x3f6f4000
>ACPI: ASF! (v032 INTEL  D946GZIS 0x00000056 MSFT 0x01000013) @ 0x3f6f3000
>ACPI: SSDT (v001 INTEL     CpuPm 0x00000056 MSFT 0x01000013) @ 0x3f6f2000
>ACPI: SSDT (v001 INTEL   Cpu0Ist 0x00000056 MSFT 0x01000013) @ 0x3f6f1000
>ACPI: SSDT (v001 INTEL   Cpu1Ist 0x00000056 MSFT 0x01000013) @ 0x3f6f0000
>ACPI: SSDT (v001 INTEL   Cpu2Ist 0x00000056 MSFT 0x01000013) @ 0x3f6ef000
>ACPI: SSDT (v001 INTEL   Cpu3Ist 0x00000056 MSFT 0x01000013) @ 0x3f6ee000
>ACPI: DSDT (v001 INTEL  D946GZIS 0x00000056 MSFT 0x01000013) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bff80000)
>Detected 2397.678 MHz processor.
>Built 1 zonelists.  Total pages: 259840
>Kernel command line: ro root=/dev/VgOSa/root
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c074b000 soft=c072b000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1020904k/1039360k available (2096k kernel code, 16080k reserved, 874k data, 228k init, 120280k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 4797.20 BogoMIPS (lpj=2398604)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000940 0000e39d 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: Intel(R) Core(TM)2 Duo CPU     E4600  @ 2.40GHz stepping 0d
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c074c000 soft=c072c000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4794.52 BogoMIPS (lpj=2397261)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000940 0000e39d 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     E4600  @ 2.40GHz stepping 0d
>Total of 2 processors activated (9591.73 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=136 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=52 bytes
>sizeof(skbuff)=172 bytes
>migration_cost=67
>checking if image is initramfs... it is
>Freeing initrd memory: 3038k freed
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:00:02.0
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0500-053f claimed by ICH6 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>PCI: Firmware left 0000:04:08.0 e100 interrupts enabled, disabling
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:06: ioport range 0x500-0x53f has been reserved
>pnp: 00:06: ioport range 0x400-0x47f could not be reserved
>pnp: 00:06: ioport range 0x680-0x6ff has been reserved
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: 50300000-503fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: 50400000-504fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: disabled.
>  MEM window: 50500000-505fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:04:00.0
>  IO window: 1000-1fff
>  MEM window: 50600000-506fffff
>  PREFETCH window: 50700000-507fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 1000-2fff
>  MEM window: 50000000-500fffff
>  PREFETCH window: 50700000-507fffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1214523478.826:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key F51CF1F017423C2
>- User ID: CentOS (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x3
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x4
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 946GZ Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0x40000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH7: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177
>ICH7: chipset revision 1
>ICH7: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x30b0-0x30b7, BIOS settings: hda:pio, hdb:pio
>Probing IDE interface ide0...
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 228k freed
>Write protecting the kernel read-only data: 393k
>Time: tsc clocksource has been installed.
>input: AT Translated Set 2 keyboard as /class/input/input0
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 225, io mem 0x50204400
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 225, io base 0x00003080
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 185, io base 0x00003060
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 177, io base 0x00003040
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 233
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 233, io base 0x00003020
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.2: version 2.12
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x30c8 ctl 0x30ec bmdma 0x30a0 irq 185
>ata2: SATA max UDMA/133 cmd 0x30c0 ctl 0x30e8 bmdma 0x30a8 irq 185
>usb 5-2: new low speed USB device using uhci_hcd and address 2
>usb 5-2: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.3-2
>ata1.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB00, max UDMA/100
>ata1.00: configured for UDMA/100
>ata2.00: ATA-8: WDC WD800AAJS-00WAA0, 58.01D58, max UDMA/133
>ata2.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata2.00: configured for UDMA/133
>  Vendor: TSSTcorp  Model: CDDVDW SH-S203P   Rev: SB00
>  Type:   CD-ROM                             ANSI SCSI revision: 05
>  Vendor: ATA       Model: WDC WD800AAJS-00  Rev: 58.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3
>sd 1:0:0:0: Attached scsi disk sda
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1214523485.385:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>security:  3 users, 6 roles, 1676 types, 213 bools, 1 sens, 1024 cats
>security:  61 classes, 60092 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1214523485.569:3): policy loaded auid=4294967295 ses=4294967295
>intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't or
> don't want to <4>intel_rng: disable this in firmware setup, and <4>intel_rng: if
> you are certain that your <4>intel_rng: system has a functional
> RNG, try<4>intel_rng: using the 'no_fwh_detect' option.
>input: PC Speaker as /class/input/input2
>sundance.c:v1.1 27-Jun-2006  Written by Donald Becker
>  http://www.scyld.com/network/sundance.html
>ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 21 (level, low) -> IRQ 50
>eth0: D-Link DFE-580TX 4 port Server Adapter at 00011180, 00:00:00:00:00:00, IRQ 50.
>eth0: No MII transceiver found, aborting.  ASIC status ffffffff
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ACPI: PCI Interrupt 0000:05:05.0[A] -> GSI 22 (level, low) -> IRQ 58
>scsi 0:0:0:0: Attached scsi generic sg0 type 5
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>eth0: D-Link DFE-580TX 4 port Server Adapter at 00011100, 00:00:00:00:00:00, IRQ 58.
>eth0: No MII transceiver found, aborting.  ASIC status ffffffff
>ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 23 (level, low) -> IRQ 225
>eth0: D-Link DFE-580TX 4 port Server Adapter at 00011080, 00:0d:88:cd:59:12, IRQ 225.
>eth0: MII PHY found at address 1, status 0x7809 advertising 01e1.
>e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
>e100: Copyright(c) 1999-2005 Intel Corporation
>ACPI: PCI Interrupt 0000:04:08.0[A] -> GSI 20 (level, low) -> IRQ 66
>ACPI: PCI Interrupt 0000:05:07.0[A] -> GSI 20 (level, low) -> IRQ 66
>eth1: D-Link DFE-580TX 4 port Server Adapter at 00011000, 00:0d:88:cd:59:13, IRQ 66.
>eth1: MII PHY found at address 1, status 0x7809 advertising 01e1.
>e100: eth2: e100_probe: addr 0x50000000, irq 66, MAC addr 00:19:D1:A0:DD:10
>8139too Fast Ethernet driver 0.9.27
>ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 22 (level, low) -> IRQ 58
>eth3: RealTek RTL8139 at 0xf897e000, 00:1c:f0:6f:41:3f, IRQ 58
>eth3:  Identified 8139 chip type 'RTL-8100B/8139D'
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 185
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 58
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SLPB]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-4, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-5, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 1048568k swap on /dev/VgOSa/swap.  Priority:-1 extents:1 across:1048568k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
>microcode: CPU1 updated from revision 0x0 to 0xa3, date = 08132007 
>microcode: CPU0 updated from revision 0x0 to 0xa3, date = 08132007 
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8120 buckets, 64960 max) - 228 bytes per conntrack
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.10
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 453058: 310402 | 310403 | 415642 | 415643