Attachment 310501 Details for Bug 453261 – kernel output witout 'silent' option

kernel output witout 'silent' option

sil680_.txt (text/plain), 5.94 KB, created by Walkie on 2008-06-28 13:42:21 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Walkie

Created: 2008-06-28 13:42:21 UTC

Size: 5.94 KB

patch

obsolete

>
>Loading pata_sil680.ko module
>sil680: 133MHz clock.
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>ACPI: Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>scsi2 : pata_sil680
>scsi3 : pata_sil680
>ata3: PATA max UDMA/133 irq 11
>ata4: PATA max UDMA/133 irq 11
>ata3.00: HPA detected: current 240121728, native 255852096
>ata3.00: ATA-7: Maxtor 6Y120L0, YAR41BW0, max UDMA/133
>ata3.00: 240121728 sectors, multi 16: LBA
>ata3.01: HPA detected: current 240121728, native 255852096
>ata3.01: ATA-7: Maxtor 6Y120L0, YAR41BW0, max UDMA/133
>ata3.01: 240121728 sectors, multi 16: LBA
>ata3.00 configured for UDMA/133
>ata3.01 configured for UDMA/133
>ata4.00: HPA detected: current 240121728, native 255852096
>ata4.00: ATA-7: Maxtor 6Y120L0, YAR41BW0, max UDMA/133
>ata4.00: 240121728 sectors, multi 16: LBA
>ata4.01: HPA detected: current 240121728, native 255852096
>ata4.01: ATA-7: Maxtor 6Y120L0, YAR41BW0, max UDMA/133
>ata4.01: 240121728 sectors, multi 16: LBA
>ata4.00 configured for UDMA/133
>ata4.01 configured for UDMA/133
>scsi 2:0:0:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdd] 240121728 512-byte hardware sectors (122942 MB)
>sd 2:0:0:0: [sdd] Write Protect is off
>sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdd] 240121728 512-byte hardware sectors (122942 MB)
>sd 2:0:0:0: [sdd] Write Protect is off
>sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sdd:<3>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata3.00: cmd c8/00:08:00:00:00:00/00:00:00:00:00:00/e0 tag 0 dma 4096 in
>         res 40/00:00:00:00:00:00/00:00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: {DRDY}
>ata3: soft resetting link
>ata3.01: revalidation failed (errno=-2)
>ata3: failed to recover some devices, retrying in 5 secs
>ata3: soft resetting link
>ata3.01: failed to IDENTIFY (I/O error, err_mask=0x1)
>ata3.01: revalidation failed (errno=-5)
>ata3: failed to recover some devices, retrying in 5 secs
>irq 11: nobody cared (try boting with the "irqpoll" option)
>Pid: 383, comm: nash-hotplug Not tainted 2.6.24.7-92.fc8 #1
> [<c046131a>] __report_bad_irq+0x36/0x75
> [<c0461534>] note_interrupt+0x1db/0x217
> [<c046097b>] handle_IRQ_event+0x23/0x51
> [<c0461e85>] handle_level_irq+0x88/0xb7
> [<c0461dfd>] handle_level_irq+0x0/0b7
> [<c0407688>] do_IRQ+0x8c/0xb8
> [<c0405bbf>] common_interrupt+0x23/0x28
> [<c0433602>] __do_softirq+0x23/0x28
> [<c040759a>] do_softirq+0x56/0xd3
> [<c04894a8>] vfs_write+0x113/0x14d
> [<c0461dfd>] handle_level_irq+0x0/0xb7
> [<c04334d5>] irq_exit+0x38/0xb6
> [<c040769b>] do_IRQ+0x9f/0xb8
> [<c0489a53>] sys_write+0x41/0x67
> [<c0405bbf>] common_interrupt+0x23/0x28
> =======================
>handlers:
>[<f08e1966>] (ata_interrupt+0x0/0x1ba [libata])
>Disabling IRQ #11
>ata3: soft resetting link
>ata3.01: failed to IDENTIFY (I/O error, err_mask=0x1)
>ata3.01: revalidation failed (errno=-5)
>ata3.01: disabled
>ata3.00: failed to IDENTIFY (I/O error, err_mask=0x1)
>ata3.00: revalidation failed (errno=-5)
>ata3: failed to recover some devices, retrying in 5 secs
>ata3: soft resetting link
>ata3.00: failed to IDENTIFY (I/O error, err_mask=0x1)
>ata3.00: revalidation failed (errno=-5)
>ata3: failed to recover some devices, retrying in 5 secs
>ata3: soft resetting link
>ata3.00: failed to IDENTIFY (I/O error, err_mask=0x1)
>ata3.00: revalidation failed (errno=-5)
>ata3.00: disabled
>ata3: EH complete
>sd 2:0:0:0: [sdd] Result: hostbyte=DID_BAD_TERGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdd, sector 0
>Buffer I/O error on device sdd, logical block 0
>sd 2:0:0:0: [sdd] Result: hostbyte=DID_BAD_TERGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdd, sector 0
>...last 5 lines 9 times...
>unable to read partition table
>sd 2:0:0:0: [sdd] Attached SCSI disk
>scsi 3:0:0:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sde] 240121728 512-byte hardware sectors (122942 MB)
>sd 3:0:0:0: [sde] Write Protect is off
>sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sde] 240121728 512-byte hardware sectors (122942 MB)
>sd 3:0:0:0: [sde] Write Protect is off
>sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sdd:<3>ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata4.00: cmd c8/00:08:00:00:00:00/00:00:00:00:00:00/e0 tag 0 dma 4096 in
>         res 40/00:00:00:00:00:00/00:00:00:00:00:00/00 Emask 0x4 (timeout)
>ata4.00: status: {DRDY}
>ata4: soft resetting link
>ata4.01: revalidation failed (errno=-2)
>ata4: failed to recover some devices, retrying in 5 secs
>ata4: soft resetting link
>ata4.01: failed to IDENTIFY (I/O error, err_mask=0x1)
>ata4.01: revalidation failed (errno=-5)
>ata4: failed to recover some devices, retrying in 5 secs
>ata4: soft resetting link
>ata4.01: revalidation failed (errno=-2)
>ata4.01: disabled
>ata4.00: failed to IDENTIFY (I/O error, err_mask=0x40)
>ata4.00: revalidation failed (errno=-5)
>ata4: failed to recover some devices, retrying in 5 secs
>ata4: soft resetting link
>ata4.00: revalidation failed (errno=-2)
>ata4: failed to recover some devices, retrying in 5 secs
>ata4: soft resetting link
>ata4.00: failed to IDENTIFY (I/O error, err_mask=0x40)
>ata4.00: revalidation failed (errno=-5)
>ata4.00: disabled
>ata4: EH complete
>sd 3:0:0:0: [sde] Result: hostbyte=DID_BAD_TERGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sde, sector 0
>Buffer I/O error on device sde, logical block 0
>sd 3:0:0:0: [sde] Result: hostbyte=DID_BAD_TERGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sde, sector 0
>...last 5 lines 9 times...
>unable to read partition table
>sd 3:0:0:0: [sde] Attached SCSI disk
>...
>Starting udev: ata_id[644]: main HDIO_GET_IDENTITY failed for '/dev/.tmp-8-48'
>ata_id[649]: main: HDIO_GET_IDENTITY failed for '/dev/.tmp-8-64'
>                                                           [  OK  ]

Actions: View

Attachments on bug 453261: 310501