Attachment 310502 Details for Bug 452696 – 2.6.25.6-27 dmesg

2.6.25.6-27 dmesg

20080628-dmesg.out (text/plain), 30.15 KB, created by Benjamin Kosnik on 2008-06-28 13:55:43 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Benjamin Kosnik

Created: 2008-06-28 13:55:43 UTC

Size: 30.15 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.25.6-27.fc8 (mockbuild@x86-2) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Fri Jun 13 16:17:54 EDT 2008
>Command line: ro root=/dev/lasalle/share rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 0000000000096c00 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
> BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
> BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
> BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
> BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 150) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524000) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.4 present.
>ACPI: RSDP 000F6F40, 0014 (r0 GBT   )
>ACPI: RSDT 7FEE3040, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: FACP 7FEE30C0, 0074 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: DSDT 7FEE3180, 54DD (r1 GBT    GBTUACPI     1000 MSFT  100000C)
>ACPI: FACS 7FEE0000, 0040
>ACPI: HPET 7FEE87C0, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU       98)
>ACPI: MCFG 7FEE8840, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: APIC 7FEE86C0, 0084 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: SSDT 7FEE88C0, 015C (r1  PmRef  Cpu0Ist     3000 INTL 20040311)
>ACPI: SSDT 7FEE8D50, 0275 (r1  PmRef    CpuPm     3000 INTL 20040311)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007fee0000
>Entering add_active_range(0, 0, 150) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524000) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007fee0000
>  NODE_DATA [000000000000c000 - 0000000000013fff]
>  bootmap [0000000000014000 -  0000000000023fdf] pages 10
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-757aeb] TEXT DATA BSS
>early res: 3 [37c0f000-37fef414] RAMDISK
>early res: 4 [96c00-a0bff] EBDA
>early res: 5 [8000-bfff] PGTABLE
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      150
>    0:      256 ->   524000
>On node 0 totalpages: 523894
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1386 pages reserved
>  DMA zone: 2548 pages, LIFO batch:0
>  DMA32 zone: 7108 pages used for memmap
>  DMA32 zone: 512796 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 0000000000096000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 7ff00000:50100000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 43072 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 515344
>Policy zone: DMA32
>Kernel command line: ro root=/dev/lasalle/share rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 2999.986 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2056984k/2096000k available (2633k kernel code, 38592k reserved, 1412k data, 344k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 6003.23 BogoMIPS (lpj=3001617)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 20833228
>Detected 20.833 MHz APIC timer.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5999.96 BogoMIPS (lpj=2999981)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Duo CPU     E6850  @ 3.00GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=224 bytes
>sizeof(task_struct)=6224 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000001 00000000,00000002
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000002 00000000,00000001
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>net_namespace: 1016 bytes
>Time: 13:49:39  Date: 06/28/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at d0000000 - dfffffff
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 64-bit timers, 14318180 Hz
>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
>system 00:01: ioport range 0x290-0x29f has been reserved
>system 00:01: ioport range 0x800-0x87f has been reserved
>system 00:01: ioport range 0x290-0x294 has been reserved
>system 00:01: ioport range 0x880-0x88f has been reserved
>system 00:09: ioport range 0x400-0x4bf could not be reserved
>system 00:0a: iomem range 0xd0000000-0xdfffffff could not be reserved
>system 00:0b: iomem range 0xd7200-0xd7fff has been reserved
>system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
>system 00:0b: iomem range 0x7fee0000-0x7fefffff could not be reserved
>system 00:0b: iomem range 0x0-0x9ffff could not be reserved
>system 00:0b: iomem range 0x100000-0x7fedffff could not be reserved
>system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0b: iomem range 0xfed10000-0xfed1dfff has been reserved
>system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved
>system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:0b: iomem range 0xffb00000-0xffb7ffff has been reserved
>system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved
>system 00:0b: iomem range 0xe0000-0xeffff has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: 0xf0000000-0xf2ffffff
>  PREFETCH window: 0x00000000e0000000-0x00000000efffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: b000-bfff
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: c000-cfff
>  MEM window: 0xf3000000-0xf3ffffff
>  PREFETCH window: 0x0000000080000000-0x00000000800fffff
>PCI: Bridge: 0000:00:1c.5
>  IO window: d000-dfff
>  MEM window: 0xf4000000-0xf5ffffff
>  PREFETCH window: 0x0000000080100000-0x00000000801fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: 0xf6000000-0xf60fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3969k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1214660979.409:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 77E2A7645533EBBA
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>Allocate Port Service[0000:00:1c.4:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>Allocate Port Service[0000:00:1c.5:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7FEE8CC0, 0087 (r1  PmRef  Cpu1Ist     3000 INTL 20040311)
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 12:270:838
>Freeing unused kernel memory: 344k freed
>Write protecting the kernel read-only data: 1128k
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf6105000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25.6-27.fc8 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf6104000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25.6-27.fc8 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-3: new high speed USB device using ehci_hcd and address 2
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25.6-27.fc8 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25.6-27.fc8 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.2 to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-3: configuration #1 chosen from 1 choice
>hub 1-3:1.0: USB hub found
>hub 1-3:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25.6-27.fc8 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1a.2
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb 1-3: New USB device found, idVendor=0424, idProduct=2502
>usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25.6-27.fc8 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25.6-27.fc8 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>usb 1-3.1: new high speed USB device using ehci_hcd and address 3
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: UHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.25.6-27.fc8 uhci_hcd
>usb usb8: SerialNumber: 0000:00:1d.2
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>usb 1-3.1: configuration #1 chosen from 1 choice
>hub 1-3.1:1.0: USB hub found
>hub 1-3.1:1.0: 4 ports detected
>usb 1-3.1: New USB device found, idVendor=0424, idProduct=2602
>usb 1-3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 1-3.1.1: new high speed USB device using ehci_hcd and address 4
>usb 1-3.1.1: configuration #1 chosen from 1 choice
>usb 1-3.1.1: New USB device found, idVendor=0424, idProduct=2228
>usb 1-3.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-3.1.1: Product: Flash Card Reader
>usb 1-3.1.1: Manufacturer: Generic
>usb 1-3.1.1: SerialNumber: 070603100588
>usb 1-3.1.3: new low speed USB device using ehci_hcd and address 5
>usb 1-3.1.3: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
>input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-3.1.3
>usb 1-3.1.3: New USB device found, idVendor=046d, idProduct=c00f
>usb 1-3.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-3.1.3: Product: USB-PS/2 Optical Mouse
>usb 1-3.1.3: Manufacturer: Logitech
>usb 1-3.1.4: new low speed USB device using ehci_hcd and address 6
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xf6106000 port 0xf6106100 irq 19
>ata2: SATA max UDMA/133 abar m2048@0xf6106000 port 0xf6106180 irq 19
>ata3: SATA max UDMA/133 abar m2048@0xf6106000 port 0xf6106200 irq 19
>ata4: SATA max UDMA/133 abar m2048@0xf6106000 port 0xf6106280 irq 19
>ata5: SATA max UDMA/133 abar m2048@0xf6106000 port 0xf6106300 irq 19
>ata6: SATA max UDMA/133 abar m2048@0xf6106000 port 0xf6106380 irq 19
>usb 1-3.1.4: configuration #1 chosen from 1 choice
>input: Logitech NetPlay Keyboard as /class/input/input2
>input,hidraw1: USB HID v1.10 Keyboard [Logitech NetPlay Keyboard] on usb-0000:00:1a.7-3.1.4
>usb 1-3.1.4: New USB device found, idVendor=046d, idProduct=c30b
>usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-3.1.4: Product: NetPlay Keyboard
>usb 1-3.1.4: Manufacturer: Logitech
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: HPA detected: current 488395055, native 488397168
>ata1.00: ATA-7: HDT722525DLA380, V44OA91A, max UDMA/133
>ata1.00: 488395055 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-7: ST3400633AS, 3.AAD, max UDMA/133
>ata2.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata2.00: configured for UDMA/133
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATAPI: PLEXTOR DVDR   PX-716A, 1.09, max UDMA/66
>ata3.00: applying bridge limits
>ata3.00: configured for UDMA/66
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      HDT722525DLA380  V44O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 488395055 512-byte hardware sectors (250058 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 488395055 512-byte hardware sectors (250058 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
> sda: p2 exceeds device capacity
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      ST3400633AS      3.AA PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: unknown partition table
>sd 1:0:0:0: [sdb] Attached SCSI disk
>scsi 2:0:0:0: CD-ROM            PLEXTOR  DVDR   PX-716A   1.09 PQ: 0 ANSI: 5
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>scsi6 : pata_jmicron
>scsi7 : pata_jmicron
>ata7: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 16
>ata8: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 16
>Initializing USB Mass Storage driver...
>scsi8 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>scsi 8:0:0:0: Direct-Access     Generic  Flash HS-CF      4.44 PQ: 0 ANSI: 0
>scsi 8:0:0:1: Direct-Access     Generic  Flash HS-COMBO   4.44 PQ: 0 ANSI: 0
>sd 8:0:0:0: [sdc] Attached SCSI removable disk
>sd 8:0:0:1: [sdd] Attached SCSI removable disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>type=1404 audit(1214661001.451:2): selinux=0 auid=4294967295 ses=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>scsi 2:0:0:0: Attached scsi generic sg2 type 5
>sd 8:0:0:0: Attached scsi generic sg3 type 0
>sd 8:0:0:1: Attached scsi generic sg4 type 0
>input: PC Speaker as /class/input/input3
>iTCO_vendor_support: vendor-support=0
>input: Power Button (FF) as /class/input/input4
>Driver 'sr' needs updating - please use bus_type methods
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>r8169 0000:04:00.0: no MSI. Back to INTx.
>eth0: RTL8168b/8111b at 0xffffc20000332000, 00:1a:4d:57:42:0b, XID 38000000 IRQ 17
>sr0: scsi3-mmc drive: 125x/125x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>parport_pc 00:08: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>ACPI: Power Button (CM) [PWRB]
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
>ACPI: PCI Interrupt 0000:05:07.0[A] -> GSI 23 (level, low) -> IRQ 23
>firewire_ohci: Added fw-ohci device 0000:05:07.0, OHCI version 1.10
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  173.14.09  Wed Jun  4 23:40:50 PDT 2008
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>firewire_core: created device fw0: GUID 00c99e6800001a4d, S400
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2031608k swap on /dev/mapper/lasalle-swap.  Priority:-1 extents:1 across:2031608k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>r8169: eth0: link up
>r8169: eth0: link up
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>fuse init (API version 7.9)
>it87: Found IT8718F chip at 0x290, revision 4
>it87: in3 is VCC (+5V)
>coretemp coretemp.0: Using relative temperature scale!
>coretemp coretemp.1: Using relative temperature scale!
>warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>eth0: no IPv6 routers present
>cdrom: This disc doesn't have any tracks I recognize!
>end_request: I/O error, dev sr0, sector 1248
>UDF-fs: Partition marked readonly; forcing readonly mount
>UDF-fs INFO UDF: Mounting volume '3711527683', timestamp 2008/03/22 11:35 (1ed4)

Actions: View

Attachments on bug 452696: 310502 | 310503 | 310504 | 312165 | 312713