Attachment 310723 Details for Bug 453680 – Full dmesg output

Full dmesg output

uhci_test.log (text/plain), 44.58 KB, created by IBM Bug Proxy on 2008-07-01 21:00:36 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: IBM Bug Proxy

Created: 2008-07-01 21:00:36 UTC

Size: 44.58 KB

patch

obsolete

>Linux version 2.6.18-84.el5 (brewbuilder@hs20-bc1-6.build.redhat.com) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-39)) #1 SMP Fri Feb 29 16:26:52 EST 2008
>Command line: ro root=LABEL=/1234 verbose console=tty0 console=ttyS0,115200 iommu=calgary
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
> BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cff4b300 (usable)
> BIOS-e820: 00000000cff4b300 - 00000000cff57b40 (ACPI data)
> BIOS-e820: 00000000cff57b40 - 00000000e0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000430000000 (usable)
>DMI 2.4 present.
>ACPI: RSDP (v002 IBM                                   ) @ 0x00000000000fdd00
>ACPI: RSDT (v001 IBM    EXA01ZEU 0x00001000 IBM  0x45444f43) @ 0x00000000cff57ac0
>ACPI: FADT (v003 IBM    EXA01ZEU 0x00001000 IBM  0x45444f43) @ 0x00000000cff57900
>ACPI: MADT (v001 IBM    EXA01ZEU 0x00001000 IBM  0x45444f43) @ 0x00000000cff57700
>ACPI: SRAT (v001 IBM    EXA01ZEU 0x00001000 IBM  0x45444f43) @ 0x00000000cff57500
>ACPI: HPET (v001 IBM    EXA01ZEU 0x00001000 IBM  0x45444f43) @ 0x00000000cff574c0
>ACPI: TCPA (v002 IBM    EXA01ZEU 0x00001000 IBM  0x45444f43) @ 0x00000000cff57440
>ACPI: MCFG (v001 IBM    EXA01ZEU 0x00001000 IBM  0x45444f43) @ 0x00000000cff57400
>ACPI: ERST (v001 IBM    EXA01ZEU 0x00001000 IBM  0x45444f43) @ 0x00000000cff535c0
>ACPI: SSDT (v001 IBM    VIGSSDT0 0x00001000 INTL 0x20060707) @ 0x00000000cff4d4c0
>ACPI: DSDT (v001 IBM    EXA01ZEU 0x00001000 INTL 0x20060707) @ 0x0000000000000000
>SRAT: PXM 0 -> APIC 8 -> Node 0
>SRAT: PXM 0 -> APIC 0 -> Node 0
>SRAT: PXM 0 -> APIC 16 -> Node 0
>SRAT: PXM 0 -> APIC 24 -> Node 0
>SRAT: PXM 0 -> APIC 9 -> Node 0
>SRAT: PXM 0 -> APIC 1 -> Node 0
>SRAT: PXM 0 -> APIC 17 -> Node 0
>SRAT: PXM 0 -> APIC 25 -> Node 0
>SRAT: PXM 0 -> APIC 10 -> Node 0
>SRAT: PXM 0 -> APIC 2 -> Node 0
>SRAT: PXM 0 -> APIC 18 -> Node 0
>SRAT: PXM 0 -> APIC 26 -> Node 0
>SRAT: PXM 0 -> APIC 11 -> Node 0
>SRAT: PXM 0 -> APIC 3 -> Node 0
>SRAT: PXM 0 -> APIC 19 -> Node 0
>SRAT: PXM 0 -> APIC 27 -> Node 0
>SRAT: PXM 0 -> APIC 12 -> Node 0
>SRAT: PXM 0 -> APIC 4 -> Node 0
>SRAT: PXM 0 -> APIC 20 -> Node 0
>SRAT: PXM 0 -> APIC 28 -> Node 0
>SRAT: PXM 0 -> APIC 13 -> Node 0
>SRAT: PXM 0 -> APIC 5 -> Node 0
>SRAT: PXM 0 -> APIC 21 -> Node 0
>SRAT: PXM 0 -> APIC 29 -> Node 0
>SRAT: Node 0 PXM 0 0-d0000000
>SRAT: Node 0 PXM 0 0-430000000
>NUMA: Using 63 for the hash shift.
>Bootmem setup node 0 0000000000000000-0000000430000000
>Memory for crash kernel (0x0 to 0x0) notwithin permissible range
>disabling kdump
>On node 0 totalpages: 4132724
>  DMA zone: 2673 pages, LIFO batch:0
>  DMA32 zone: 833411 pages, LIFO batch:31
>  Normal zone: 3296640 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x588
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x08] enabled)
>Processor #8 7:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 7:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x10] enabled)
>Processor #16 7:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x18] enabled)
>Processor #24 7:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x09] enabled)
>Processor #9 7:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
>Processor #1 7:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x11] enabled)
>Processor #17 7:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x19] enabled)
>Processor #25 7:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0a] enabled)
>Processor #10 7:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x09] lapic_id[0x02] enabled)
>Processor #2 7:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled)
>Processor #18 7:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x1a] enabled)
>Processor #26 7:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] enabled)
>Processor #11 7:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x03] enabled)
>Processor #3 7:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x13] enabled)
>Processor #19 7:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x1b] enabled)
>Processor #27 7:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0c] enabled)
>Processor #12 7:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x11] lapic_id[0x04] enabled)
>Processor #4 7:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x12] lapic_id[0x14] enabled)
>Processor #20 7:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x13] lapic_id[0x1c] enabled)
>Processor #28 7:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x14] lapic_id[0x0d] enabled)
>Processor #13 7:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x15] lapic_id[0x05] enabled)
>Processor #5 7:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x16] lapic_id[0x15] enabled)
>Processor #21 7:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x17] lapic_id[0x1d] enabled)
>Processor #29 7:13 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0a] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0b] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0e] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0f] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x10] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x11] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x12] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x13] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x14] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x15] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x16] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x17] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x0f] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 15, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x10] address[0xfecff000] gsi_base[24])
>IOAPIC[1]: apic_id 16, version 17, address 0xfecff000, GSI 24-26
>ACPI: IOAPIC (id[0x0e] address[0xfec01000] gsi_base[27])
>IOAPIC[2]: apic_id 14, version 17, address 0xfec01000, GSI 27-62
>ACPI: IOAPIC (id[0x0d] address[0xfec02000] gsi_base[63])
>IOAPIC[3]: apic_id 13, version 17, address 0xfec02000, GSI 63-98
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 8 global_irq 8 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ8 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>Setting APIC routing to clustered
>ACPI: HPET id: 0x10142201 base: 0xfde84000
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009b000 - 000000000009c000
>Nosave address range: 000000000009c000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000e0000
>Nosave address range: 00000000000e0000 - 0000000000100000
>Nosave address range: 00000000cff4b000 - 00000000cff4c000
>Nosave address range: 00000000cff4c000 - 00000000cff57000
>Nosave address range: 00000000cff57000 - 00000000cff58000
>Nosave address range: 00000000cff58000 - 00000000e0000000
>Nosave address range: 00000000e0000000 - 00000000fec00000
>Nosave address range: 00000000fec00000 - 0000000100000000
>Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
>SMP: Allowing 24 CPUs, 0 hotplug CPUs
>Built 1 zonelists.  Total pages: 4132724
>Kernel command line: ro root=LABEL=/1234 verbose console=tty0 console=ttyS0,115200 iommu=calgary
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: finished detection, Calgary found
>PCI-DMA: Calgary IOMMU detected.
>PCI-DMA: Calgary TCE table spec is 7, CONFIG_IOMMU_DEBUG is disabled.
>Memory: 16437068k/17563648k available (2456k kernel code, 339020k reserved, 1242k data, 196k init)
>Calibrating delay using timer specific routine.. 4267.17 BogoMIPS (lpj=2133586)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 0/8 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 0
>MCE: warning: using only 7 banks
>CPU0: Thermal monitoring enabled (TM1)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>result 16659115
>Detected 16.659 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/24 APIC 0x0
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4264.18 BogoMIPS (lpj=2132092)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 1/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>MCE: warning: using only 7 banks
>CPU1: Thermal monitoring enabled (TM1)
>Genuine Intel(R) CPU                  @ 2.13GHz stepping 00
>SMP alternatives: switching to SMP code
>Booting processor 2/24 APIC 0x10
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 4264.12 BogoMIPS (lpj=2132060)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 2/10 -> Node 0
>CPU: Physical Processor ID: 2
>CPU: Processor Core ID: 0
>MCE: warning: using only 7 banks
>CPU2: Thermal monitoring enabled (TM1)
>Genuine Intel(R) CPU                  @ 2.13GHz stepping 00
>SMP alternatives: switching to SMP code
>Booting processor 3/24 APIC 0x18
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 4264.18 BogoMIPS (lpj=2132093)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 3/18 -> Node 0
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 0
>MCE: warning: using only 7 banks
>CPU3: Thermal monitoring enabled (TM1)
>Genuine Intel(R) CPU                  @ 2.13GHz stepping 00
>SMP alternatives: switching to SMP code
>Booting processor 4/24 APIC 0x9
>Initializing CPU#4
>Calibrating delay using timer specific routine.. 4264.21 BogoMIPS (lpj=2132105)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 4/9 -> Node 0
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 1
>MCE: warning: using only 7 banks
>CPU4: Thermal monitoring enabled (TM1)
>Genuine Intel(R) CPU                  @ 2.13GHz stepping 00
>SMP alternatives: switching to SMP code
>Booting processor 5/24 APIC 0x1
>Initializing CPU#5
>Calibrating delay using timer specific routine.. 4264.16 BogoMIPS (lpj=2132081)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 5/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>MCE: warning: using only 7 banks
>CPU5: Thermal monitoring enabled (TM1)
>Genuine Intel(R) CPU                  @ 2.13GHz stepping 00
>SMP alternatives: switching to SMP code
>Booting processor 6/24 APIC 0x11
>Initializing CPU#6
>Calibrating delay using timer specific routine.. 4264.12 BogoMIPS (lpj=2132062)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 6/11 -> Node 0
>CPU: Physical Processor ID: 2
>CPU: Processor Core ID: 1
>MCE: warning: using only 7 banks
>CPU6: Thermal monitoring enabled (TM1)
>Genuine Intel(R) CPU                  @ 2.13GHz stepping 00
>SMP alternatives: switching to SMP code
>Booting processor 7/24 APIC 0x19
>Initializing CPU#7
>Calibrating delay using timer specific routine.. 4264.18 BogoMIPS (lpj=2132094)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 7/19 -> Node 0
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 1
>MCE: warning: using only 7 banks
>CPU7: Thermal monitoring enabled (TM1)
>Genuine Intel(R) CPU                  @ 2.13GHz stepping 00
>SMP alternatives: switching to SMP code
>Booting processor 8/24 APIC 0xa
>Initializing CPU#8
>Calibrating delay using timer specific routine.. 4264.15 BogoMIPS (lpj=2132078)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 8/a -> Node 0
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 2
>MCE: warning: using only 7 banks
>CPU8: Thermal monitoring enabled (TM1)
>Genuine Intel(R) CPU                  @ 2.13GHz stepping 00
>SMP alternatives: switching to SMP code
>Booting processor 9/24 APIC 0x2
>Initializing CPU#9
>Calibrating delay using timer specific routine.. 4264.12 BogoMIPS (lpj=2132061)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 9/2 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 2
>MCE: warning: using only 7 banks
>CPU9: Thermal monitoring enabled (TM1)
>Genuine Intel(R) CPU                  @ 2.13GHz stepping 00
>SMP alternatives: switching to SMP code
>Booting processor 10/24 APIC 0x12
>Initializing CPU#10
>Calibrating delay using timer specific routine.. 4264.12 BogoMIPS (lpj=2132062)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 10/12 -> Node 0
>CPU: Physical Processor ID: 2
>CPU: Processor Core ID: 2
>MCE: warning: using only 7 banks
>CPU10: Thermal monitoring enabled (TM1)
>Genuine Intel(R) CPU                  @ 2.13GHz stepping 00
>SMP alternatives: switching to SMP code
>Booting processor 11/24 APIC 0x1a
>Initializing CPU#11
>Calibrating delay using timer specific routine.. 4264.06 BogoMIPS (lpj=2132033)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 11/1a -> Node 0
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 2
>MCE: warning: using only 7 banks
>CPU11: Thermal monitoring enabled (TM1)
>Genuine Intel(R) CPU                  @ 2.13GHz stepping 00
>SMP alternatives: switching to SMP code
>Booting processor 12/24 APIC 0xb
>Initializing CPU#12
>Calibrating delay using timer specific routine.. 4264.03 BogoMIPS (lpj=2132018)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 12/b -> Node 0
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 3
>MCE: warning: using only 7 banks
>CPU12: Thermal monitoring enabled (TM1)
>Genuine Intel(R) CPU                  @ 2.13GHz stepping 00
>SMP alternatives: switching to SMP code
>Booting processor 13/24 APIC 0x3
>Initializing CPU#13
>Calibrating delay using timer specific routine.. 4264.12 BogoMIPS (lpj=2132061)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 13/3 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 3
>MCE: warning: using only 7 banks
>CPU13: Thermal monitoring enabled (TM1)
>Genuine Intel(R) CPU                  @ 2.13GHz stepping 00
>SMP alternatives: switching to SMP code
>Booting processor 14/24 APIC 0x13
>Initializing CPU#14
>Calibrating delay using timer specific routine.. 4264.15 BogoMIPS (lpj=2132077)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 14/13 -> Node 0
>CPU: Physical Processor ID: 2
>CPU: Processor Core ID: 3
>MCE: warning: using only 7 banks
>CPU14: Thermal monitoring enabled (TM1)
>Genuine Intel(R) CPU                  @ 2.13GHz stepping 00
>SMP alternatives: switching to SMP code
>Booting processor 15/24 APIC 0x1b
>Initializing CPU#15
>Calibrating delay using timer specific routine.. 4264.12 BogoMIPS (lpj=2132063)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 15/1b -> Node 0
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 3
>MCE: warning: using only 7 banks
>CPU15: Thermal monitoring enabled (TM1)
>Genuine Intel(R) CPU                  @ 2.13GHz stepping 00
>SMP alternatives: switching to SMP code
>Booting processor 16/24 APIC 0xc
>Initializing CPU#16
>Calibrating delay using timer specific routine.. 4264.03 BogoMIPS (lpj=2132017)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 16/c -> Node 0
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 4
>MCE: warning: using only 7 banks
>CPU16: Thermal monitoring enabled (TM1)
>Genuine Intel(R) CPU                  @ 2.13GHz stepping 00
>SMP alternatives: switching to SMP code
>Booting processor 17/24 APIC 0x4
>Initializing CPU#17
>Calibrating delay using timer specific routine.. 4264.08 BogoMIPS (lpj=2132041)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 17/4 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 4
>MCE: warning: using only 7 banks
>CPU17: Thermal monitoring enabled (TM1)
>Genuine Intel(R) CPU                  @ 2.13GHz stepping 00
>SMP alternatives: switching to SMP code
>Booting processor 18/24 APIC 0x14
>Initializing CPU#18
>Calibrating delay using timer specific routine.. 4264.12 BogoMIPS (lpj=2132063)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 18/14 -> Node 0
>CPU: Physical Processor ID: 2
>CPU: Processor Core ID: 4
>MCE: warning: using only 7 banks
>CPU18: Thermal monitoring enabled (TM1)
>Genuine Intel(R) CPU                  @ 2.13GHz stepping 00
>SMP alternatives: switching to SMP code
>Booting processor 19/24 APIC 0x1c
>Initializing CPU#19
>Calibrating delay using timer specific routine.. 4264.06 BogoMIPS (lpj=2132031)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 19/1c -> Node 0
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 4
>MCE: warning: using only 7 banks
>CPU19: Thermal monitoring enabled (TM1)
>Genuine Intel(R) CPU                  @ 2.13GHz stepping 00
>SMP alternatives: switching to SMP code
>Booting processor 20/24 APIC 0xd
>Initializing CPU#20
>Calibrating delay using timer specific routine.. 4264.09 BogoMIPS (lpj=2132048)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 20/d -> Node 0
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 5
>MCE: warning: using only 7 banks
>CPU20: Thermal monitoring enabled (TM1)
>Genuine Intel(R) CPU                  @ 2.13GHz stepping 00
>SMP alternatives: switching to SMP code
>Booting processor 21/24 APIC 0x5
>Initializing CPU#21
>Calibrating delay using timer specific routine.. 4264.16 BogoMIPS (lpj=2132083)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 21/5 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 5
>MCE: warning: using only 7 banks
>CPU21: Thermal monitoring enabled (TM1)
>Genuine Intel(R) CPU                  @ 2.13GHz stepping 00
>SMP alternatives: switching to SMP code
>Booting processor 22/24 APIC 0x15
>Initializing CPU#22
>Calibrating delay using timer specific routine.. 4264.22 BogoMIPS (lpj=2132112)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 22/15 -> Node 0
>CPU: Physical Processor ID: 2
>CPU: Processor Core ID: 5
>MCE: warning: using only 7 banks
>CPU22: Thermal monitoring enabled (TM1)
>Genuine Intel(R) CPU                  @ 2.13GHz stepping 00
>SMP alternatives: switching to SMP code
>Booting processor 23/24 APIC 0x1d
>Initializing CPU#23
>Calibrating delay using timer specific routine.. 4264.12 BogoMIPS (lpj=2132062)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: L3 cache: 16384K
>CPU 23/1d -> Node 0
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 5
>MCE: warning: using only 7 banks
>CPU23: Thermal monitoring enabled (TM1)
>Genuine Intel(R) CPU                  @ 2.13GHz stepping 00
>Brought up 24 CPUs
>testing NMI watchdog ... OK.
>time.c: Using 266.538728 MHz WALL PIT GTOD PIT/TSC timer.
>time.c: Detected 2132.368 MHz processor.
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=216 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=96 bytes
>sizeof(skbuff)=240 bytes
>migration_cost=75,18317
>checking if image is initramfs... it is
>Freeing initrd memory: 2498k freed
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at d0000000
>PCI: Buses that can't use MMCONFIG will use type 1 PCI conf access.
>ACPI Error (exresop-0103): Needed type [Reference], found [Integer] ffff81042f18e6a0 [20060707]
>ACPI Exception (dswexec-0458): AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] [20060707]
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CP00._INI] (Node ffff81010eb65310), AE_AML_OPERAND_TYPE
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [VP0E] (0000:00)
>PCI: IBM System x3950 detected, can skip ISA alignment
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0580-05ff claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0400-043f claimed by ICH6 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>bus 0 -> pxm 0 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.VP0E._PRT]
>ACPI: PCI Root Bridge [VP00] (0000:03)
>PCI: IBM System x3950 detected, can skip ISA alignment
>PCI: Probing PCI hardware (bus 03)
>PCI: Transparent bridge - 0000:03:00.0
>bus 3 -> pxm 0 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.VP00._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.VP00.P2PB._PRT]
>ACPI: PCI Root Bridge [VP01] (0000:17)
>PCI: IBM System x3950 detected, can skip ISA alignment
>PCI: Probing PCI hardware (bus 17)
>PCI: If a device isn't working, try "pci=nommconf".
>PCI: Transparent bridge - 0000:17:00.0
>bus 23 -> pxm 0 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.VP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.VP01.P2PB._PRT]
>ACPI: PCI Root Bridge [VP02] (0000:1d)
>PCI: IBM System x3950 detected, can skip ISA alignment
>PCI: Probing PCI hardware (bus 1d)
>PCI: Transparent bridge - 0000:1d:00.0
>bus 29 -> pxm 0 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.VP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.VP02.P2PB._PRT]
>ACPI: PCI Root Bridge [VP03] (0000:23)
>PCI: IBM System x3950 detected, can skip ISA alignment
>PCI: Probing PCI hardware (bus 23)
>PCI: Transparent bridge - 0000:23:00.0
>bus 35 -> pxm 0 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.VP03._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.VP03.P2PB._PRT]
>ACPI: PCI Root Bridge [VP04] (0000:29)
>PCI: IBM System x3950 detected, can skip ISA alignment
>PCI: Probing PCI hardware (bus 29)
>PCI: Transparent bridge - 0000:29:00.0
>bus 41 -> pxm 0 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.VP04._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.VP04.P2PB._PRT]
>ACPI: PCI Root Bridge [VP05] (0000:05)
>PCI: IBM System x3950 detected, can skip ISA alignment
>PCI: Probing PCI hardware (bus 05)
>PCI: Transparent bridge - 0000:05:00.0
>bus 5 -> pxm 0 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.VP05._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.VP05.P2PB._PRT]
>ACPI: PCI Root Bridge [VP06] (0000:0b)
>PCI: IBM System x3950 detected, can skip ISA alignment
>PCI: Probing PCI hardware (bus 0b)
>PCI: Transparent bridge - 0000:0b:00.0
>bus 11 -> pxm 0 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.VP06._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.VP06.P2PB._PRT]
>ACPI: PCI Root Bridge [VP07] (0000:11)
>PCI: IBM System x3950 detected, can skip ISA alignment
>PCI: Probing PCI hardware (bus 11)
>PCI: Transparent bridge - 0000:11:00.0
>bus 17 -> pxm 0 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.VP07._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.VP07.P2PB._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 21 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfde84000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 3707069 Hz
>PCI-DMA: Using Calgary IOMMU
>Calgary: enabling translation on CalIOC2 PHB 0x3
>Calgary: errant DMAs will now be prevented on this bus.
>Calgary: enabling translation on CalIOC2 PHB 0x17
>Calgary: errant DMAs will now be prevented on this bus.
>Calgary: enabling translation on CalIOC2 PHB 0x1d
>Calgary: errant DMAs will now be prevented on this bus.
>Calgary: enabling translation on CalIOC2 PHB 0x23
>Calgary: errant DMAs will now be prevented on this bus.
>Calgary: enabling translation on CalIOC2 PHB 0x29
>Calgary: errant DMAs will now be prevented on this bus.
>Calgary: enabling translation on CalIOC2 PHB 0x5
>Calgary: errant DMAs will now be prevented on this bus.
>Calgary: enabling translation on CalIOC2 PHB 0xb
>Calgary: errant DMAs will now be prevented on this bus.
>Calgary: enabling translation on CalIOC2 PHB 0x11
>Calgary: errant DMAs will now be prevented on this bus.
>PCI-GART: No AMD northbridge found.
>Calgary: fixing up tce spaces
>pnp: 00:08: ioport range 0xca8-0xca8 has been reserved
>pnp: 00:08: ioport range 0xcac-0xcac has been reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: f2000000-f5ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: 2000-2fff
>  MEM window: f6000000-f60fffff
>  PREFETCH window: e8000000-efffffff
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Bridge: 0000:03:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>PCI: Bridge: 0000:17:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:17:00.0 to 64
>PCI: Bridge: 0000:1d:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:1d:00.0 to 64
>PCI: Bridge: 0000:23:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:23:00.0 to 64
>PCI: Bridge: 0000:29:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:29:00.0 to 64
>PCI: Bridge: 0000:05:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>PCI: Bridge: 0000:0b:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:0b:00.0 to 64
>PCI: Bridge: 0000:11:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:11:00.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1206142595.895:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 2414182DD6C3AA1B
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfde84000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH7: IDE controller at PCI slot 0000:00:1f.1
>ACPI: Unable to derive IRQ for device 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI
>ICH7: chipset revision 1
>ICH7: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:DMA, hdb:DMA
>Probing IDE interface ide0...
>hda: HL-DT-STCD-RW/DVD DRIVE GCC-T10N, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>i8042.c: Can't read CTR while initializing i8042.
>i8042: probe of i8042 failed with error -5
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S5)
>Freeing unused kernel memory: 196k freed
>Write protecting the kernel read-only data: 475k
>GSI 16 sharing vector 0xB9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 185, io mem 0xf6100000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 185, io base 0x00003000
>uhci_hcd 0000:00:1d.0: host controller process error, something bad happened!
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: host controller halted, very bad!
>uhci_hcd 0000:00:1d.0: HC died; cleaning up
>serial8250: too much work for irq4
>serial8250: too much work for irq4
>serial8250: too much work for irq4
>hub 2-0:1.0: activate --> -108
>uhci_hcd 0000:00:1d.0: HC died; cleaning up
>GSI 17 sharing vector 0xC1 and IRQ 17
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 193, io base 0x00003100
>uhci_hcd 0000:00:1d.1: host controller process error, something bad happened!
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: host controller halted, very bad!
>uhci_hcd 0000:00:1d.1: HC died; cleaning up
>serial8250: too much work for irq4
>hub 3-0:1.0: activate --> -108
>uhci_hcd 0000:00:1d.1: HC died; cleaning up
>GSI 18 sharing vector 0xC9 and IRQ 18
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 201, io base 0x00003200
>uhci_hcd 0000:00:1d.2: host controller process error, something bad happened!
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: host controller halted, very bad!
>uhci_hcd 0000:00:1d.2: HC died; cleaning up
>hub 4-0:1.0: activate --> -108
>uhci_hcd 0000:00:1d.2: HC died; cleaning up
>hub 4-0:1.0: hub_port_status failed (err = -108)
>hub 4-0:1.0: hub_port_status failed (err = -108)
>GSI 19 sharing vector 0xD1 and IRQ 19
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 209, io base 0x00003300
>uhci_hcd 0000:00:1d.3: host controller process error, something bad happened!
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: host controller halted, very bad!
>uhci_hcd 0000:00:1d.3: HC died; cleaning up
>hub 5-0:1.0: activate --> -108
>uhci_hcd 0000:00:1d.3: HC died; cleaning up
>hub 5-0:1.0: hub_port_status failed (err = -108)
>hub 5-0:1.0: hub_port_status failed (err = -108)
>SCSI subsystem initialized
>ttyS0: 230 input overrun(s)
>Fusion MPT base driver 3.04.05
>Copyright (c) 1999-2007 LSI Corporation
>Fusion MPT SAS Host driver 3.04.05
>GSI 20 sharing vector 0xD9 and IRQ 20
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 46 (level, low) -> IRQ 217
>mptbase: ioc0: Initiating bringup
>ioc0: LSISAS1078 C1: Capabilities={Initiator}
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>scsi0 : ioc0: LSISAS1078 C1, FwRev=01175000h, Ports=1, MaxQ=276, IRQ=217
>  Vendor: IBM-ESXS  Model: ST973451SS        Rev: B612
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 143374000 512-byte hdwr sectors (73407 MB)
>serial8250: too much work for irq4
>serial8250: too much work for irq4
>serial8250: too much work for irq4
>serial8250: too much work for irq4
>serial8250: too much work for irq4
>sda: Write Protect is off
>sda: Mode Sense: bb 00 10 08
>SCSI device sda: drive cache: write through w/ FUA
>SCSI device sda: 143374000 512-byte hdwr sectors (73407 MB)
>sda: Write Protect is off
>sda: Mode Sense: bb 00 10 08
>SCSI device sda: drive cache: write through w/ FUA
> sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
>sd 0:0:0:0: Attached scsi disk sda
>  Vendor: IBM-ESXS  Model: ST973451SS        Rev: B612
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sdb: 143374000 512-byte hdwr sectors (73407 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: bb 00 10 08
>SCSI device sdb: drive cache: write through w/ FUA
>SCSI device sdb: 143374000 512-byte hdwr sectors (73407 MB)
>serial8250: too much work for irq4
>serial8250: too much work for irq4
>serial8250: too much work for irq4
>serial8250: too much work for irq4
>serial8250: too much work for irq4
>sdb: Write Protect is off
>sdb: Mode Sense: bb 00 10 08
>SCSI device sdb: drive cache: write through w/ FUA
> sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 >
>sd 0:0:1:0: Attached scsi disk sdb
>libata version 3.00 loaded.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1206142629.157:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>security:  3 users, 6 roles, 1672 types, 213 bools, 1 sens, 1024 cats
>security:  61 classes, 59381 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sdb9, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1206142629.349:3): policy loaded auid=4294967295 ses=4294967295
>input: PC Speaker as /class/input/input0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.6.9 (December 8, 2007)
>GSI 21 sharing vector 0xE1 and IRQ 21
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>eth0: Broadcom NetXtreme II BCM5709 1000Base-T (A1) PCI Express found at mem f2000000, IRQ 225, node addr 001a643520c8
>ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 17 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:02:00.1 to 64
>eth1: Broadcom NetXtreme II BCM5709 1000Base-T (A1) PCI Express found at mem f4000000, IRQ 193, node addr 001a643520ca
>hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>intel_rng: FWH not detected
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>Hotplug Mem Device 
>ACPI: Power Button (FF) [PWRF]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sdb9, internal journal
>audit(1206142638.125:4): avc:  denied  { write } for  pid=4230 comm="mount" name="blkid.tab" dev=sdb9 ino=1606497 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file
>audit(1206142638.229:5): avc:  denied  { unlink } for  pid=4234 comm="mount" name="blkid.tab.old" dev=sdb9 ino=1608018 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda5, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>audit(1206142638.286:6): avc:  denied  { unlink } for  pid=4239 comm="mount" name="blkid.tab.old" dev=sdb9 ino=1608018 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file
>audit(1206142638.392:7): enforcing=0 old_enforcing=1 auid=4294967295 ses=4294967295
>audit(1206142675.188:8): avc:  denied  { getattr } for  pid=4260 comm="setfiles" path="/proc/mdstat" dev=proc ino=4026532487 scontext=system_u:system_r:setfiles_t:s0 tcontext=system_u:object_r:proc_mdstat_t:s0 tclass=file
>audit(1206142675.189:9): avc:  denied  { getattr } for  pid=4260 comm="setfiles" path="/proc/irq" dev=proc ino=4026532097 scontext=system_u:system_r:setfiles_t:s0 tcontext=system_u:object_r:sysctl_irq_t:s0 tclass=dir
>audit(1206142675.189:10): avc:  denied  { read } for  pid=4260 comm="setfiles" name="irq" dev=proc ino=4026532097 scontext=system_u:system_r:setfiles_t:s0 tcontext=system_u:object_r:sysctl_irq_t:s0 tclass=dir
>audit(1206142675.189:11): avc:  denied  { search } for  pid=4260 comm="setfiles" name="irq" dev=proc ino=4026532097 scontext=system_u:system_r:setfiles_t:s0 tcontext=system_u:object_r:sysctl_irq_t:s0 tclass=dir
>audit(1206142675.189:12): avc:  denied  { getattr } for  pid=4260 comm="setfiles" path="/proc/irq/217/smp_affinity" dev=proc ino=4026532518 scontext=system_u:system_r:setfiles_t:s0 tcontext=system_u:object_r:sysctl_irq_t:s0 tclass=file
>audit(1206142675.191:13): avc:  denied  { getattr } for  pid=4260 comm="setfiles" path="/proc/sys/dev" dev=proc ino=4026532096 scontext=system_u:system_r:setfiles_t:s0 tcontext=system_u:object_r:sysctl_dev_t:s0 tclass=dir
>audit(1206142675.191:14): avc:  denied  { read } for  pid=4260 comm="setfiles" name="dev" dev=proc ino=4026532096 scontext=system_u:system_r:setfiles_t:s0 tcontext=system_u:object_r:sysctl_dev_t:s0 tclass=dir
>audit(1206142675.191:15): avc:  denied  { search } for  pid=4260 comm="setfiles" name="dev" dev=proc ino=4026532096 scontext=system_u:system_r:setfiles_t:s0 tcontext=system_u:object_r:sysctl_dev_t:s0 tclass=dir
>audit(1206142675.191:16): avc:  denied  { getattr } for  pid=4260 comm="setfiles" path="/proc/sys/dev/parport/default/spintime" dev=proc ino=4026532544 scontext=system_u:system_r:setfiles_t:s0 tcontext=system_u:object_r:sysctl_dev_t:s0 tclass=file
>audit(1206142675.191:17): avc:  denied  { getattr } for  pid=4260 comm="setfiles" path="/proc/sys/net" dev=proc ino=4026531964 scontext=system_u:system_r:setfiles_t:s0 tcontext=system_u:object_r:sysctl_net_t:s0 tclass=dir
>printk: 138 messages suppressed.
>audit(1206142736.304:64): avc:  denied  { create } for  pid=4259 comm="setfiles" scontext=system_u:system_r:setfiles_t:s0 tcontext=system_u:system_r:setfiles_t:s0 tclass=netlink_audit_socket
>audit(1206142736.304:65): avc:  denied  { write } for  pid=4259 comm="setfiles" scontext=system_u:system_r:setfiles_t:s0 tcontext=system_u:system_r:setfiles_t:s0 tclass=netlink_audit_socket
>audit(1206142736.304:66): avc:  denied  { nlmsg_relay } for  pid=4259 comm="setfiles" scontext=system_u:system_r:setfiles_t:s0 tcontext=system_u:system_r:setfiles_t:s0 tclass=netlink_audit_socket
>audit(1206142736.304:67): avc:  denied  { audit_write } for  pid=4259 comm="setfiles" capability=29 scontext=system_u:system_r:setfiles_t:s0 tcontext=system_u:system_r:setfiles_t:s0 tclass=capability
>audit(1206142736.304:68): avc:  denied  { read } for  pid=4259 comm="setfiles" scontext=system_u:system_r:setfiles_t:s0 tcontext=system_u:system_r:setfiles_t:s0 tclass=netlink_audit_socket
>audit(1206142736.327:69): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>Adding 4200988k swap on /dev/sda2.  Priority:-1 extents:1 across:4200988k
>Adding 1052248k swap on /dev/sdb2.  Priority:-2 extents:1 across:1052248k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
>ACPI: Invalid _PSS data: freq is zero
>ACPI: Invalid _PSS data: freq is zero
>ACPI: Invalid _PSS data: freq is zero
>ACPI: Invalid _PSS data: freq is zero
>ACPI: Invalid _PSS data: freq is zero
>ACPI: Invalid _PSS data: freq is zero
>ACPI: Invalid _PSS data: freq is zero
>ACPI: Invalid _PSS data: freq is zero
>ACPI: Invalid _PSS data: freq is zero
>ACPI: Invalid _PSS data: freq is zero
>ACPI: Invalid _PSS data: freq is zero
>ACPI: Invalid _PSS data: freq is zero
>ACPI: Invalid _PSS data: freq is zero
>ACPI: Invalid _PSS data: freq is zero
>ACPI: Invalid _PSS data: freq is zero
>ACPI: Invalid _PSS data: freq is zero
>ACPI: Invalid _PSS data: freq is zero
>ACPI: Invalid _PSS data: freq is zero
>ACPI: Invalid _PSS data: freq is zero
>ACPI: Invalid _PSS data: freq is zero
>ACPI: Invalid _PSS data: freq is zero
>ACPI: Invalid _PSS data: freq is zero
>ACPI: Invalid _PSS data: freq is zero
>ACPI: Invalid _PSS data: freq is zero
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
>bnx2: eth0: using MSI
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>bnx2: eth0 NIC Copper Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.10
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bridge firewalling registered
>virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>eth0: no IPv6 routers present
>ttyS0: 1 input overrun(s)
>virbr0: no IPv6 routers present
>ttyS0: 20 input overrun(s)

Actions: View

Attachments on bug 453680: 310722 | 310723 | 315160 | 316513 | 316864 | 324530