Attachment 310738 Details for Bug 450918 – dmesg output for kernel.TEST.bz450918.2

dmesg output for kernel.TEST.bz450918.2

dmesg_out.kernel.TEST.bz450918.2 (text/plain), 51.97 KB, created by Wei Li on 2008-07-02 00:24:03 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Wei Li

Created: 2008-07-02 00:24:03 UTC

Size: 51.97 KB

patch

obsolete

>Linux version 2.6.9-75.EL.TEST.bz450918.2smp (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-10)) #1 SMP Tue Jul 1 16:38:24 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
> BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
> BIOS-e820: 000000000fef0000 - 000000000feff000 (ACPI data)
> BIOS-e820: 000000000feff000 - 000000000ff00000 (ACPI NVS)
> BIOS-e820: 000000000ff00000 - 0000000010000000 (usable)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>256MB LOWMEM available.
>found SMP MP-table at 000f6aa0
>NX (Execute Disable) protection: active
>On node 0 totalpages: 65536
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 61440 pages, LIFO batch:15
>  HighMem zone: 0 pages, LIFO batch:1
>DMI present.
>Using APIC driver default
>ACPI: RSDP (v002 PTLTD                                 ) @ 0x000f6a30
>ACPI: XSDT (v001 INTEL  440BX    0x06040000 VMW  0x01324272) @ 0x0fef076d
>ACPI: FADT (v004 INTEL  440BX    0x06040000 PTL  0x000f4240) @ 0x0fefee98
>ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x0fef08fd
>ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0x0fef08ad
>ACPI: MCFG (v001 PTLTD  $PCITBL$ 0x06040000  LTP 0x00000001) @ 0x0fef0871
>ACPI: SRAT (v002 VMWARE MEMPLUG  0x06040000 VMW  0x00000001) @ 0x0fef07f1
>ACPI: DSDT (v001 PTLTD  Custom   0x06040000 MSFT 0x03000001) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:5 APIC version 17
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>Enabling APIC mode:  Flat.  Using 0 I/O APICs
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 20000000 (gap: 10000000:d0000000)
>Built 1 zonelists
>Kernel command line: ro root=LABEL=/ rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0403000 soft=c03e3000
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 2592.769 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 253544k/262144k available (1925k kernel code, 7980k reserved, 787k data, 192k init, 0k highmem)
>Calibrating delay using timer specific routine.. 5194.94 BogoMIPS (lpj=2597472)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
>CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000
>CPU: After vendor identify, caps:  078bfbff e3d3fbff 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU: After all inits, caps:        078bfbff e3d3fbff 00000000 00000410
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>CPU0: AMD Opteron(tm) Processor 252 stepping 01
>per-CPU timeslice cutoff: 2925.67 usecs.
>task migration cache decay timeout: 2 msecs.
>Total of 1 processors activated (5194.94 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 pin1=2 pin2=-1
>Brought up 1 CPUs
>zapping low mappings.
>checking if image is initramfs... it is
>Freeing initrd memory: 759k freed
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xfd8a0, last bus=34
>PCI: Using MMCONFIG
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20040816
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:11.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>xen_mem: Initialising balloon driver.
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>ACPI: PCI Interrupt 0000:00:07.7[A] -> GSI 16 (level, low) -> IRQ 169
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 16 (level, low) -> IRQ 169
>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 177
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 185
>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 193
>ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 16 (level, low) -> IRQ 169
>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 17 (level, low) -> IRQ 177
>Simple Boot Flag at 0x36 set to 0x80
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1214942099.284:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 8D9F06CD159A201D
>  - key was been created 1792 seconds in future
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Limiting direct PCI/PCI transfers.
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports C1, 8 throttling states)
>Real Time Clock Driver v1.12
>Linux agpgart interface v0.100 (c) Dave Jones
>agpgart: Detected an Intel 440BX Chipset.
>agpgart: Maximum main memory to use for agp memory: 204M
>agpgart: AGP aperture is 256M @ 0x0
>i8042_init: aux_irq 12 kbd_irq 1
>drivers/input/serio/i8042.c: 20 -> i8042 (command) [0]
>drivers/input/serio/i8042.c: 47 <- i8042 (return) [0]
>drivers/input/serio/i8042.c: 60 -> i8042 (command) [0]
>drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [0]
>drivers/input/serio/i8042.c: d3 -> i8042 (command) [0]
>drivers/input/serio/i8042.c: f0 -> i8042 (parameter) [0]
>drivers/input/serio/i8042.c: 0f <- i8042 (return) [0]
>drivers/input/serio/i8042.c: d3 -> i8042 (command) [0]
>drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [0]
>drivers/input/serio/i8042.c: a9 <- i8042 (return) [0]
>drivers/input/serio/i8042.c: d3 -> i8042 (command) [0]
>drivers/input/serio/i8042.c: a4 -> i8042 (parameter) [0]
>drivers/input/serio/i8042.c: 5b <- i8042 (return) [0]
>i8042_init: i8042_noaux 0 i8042_check_aux() -1
>drivers/input/serio/i8042.c: d3 -> i8042 (command) [1]
>drivers/input/serio/i8042.c: 5a -> i8042 (parameter) [1]
>drivers/input/serio/i8042.c: a5 <- i8042 (return) [1]
>drivers/input/serio/i8042.c: a7 -> i8042 (command) [1]
>drivers/input/serio/i8042.c: 20 -> i8042 (command) [1]
>drivers/input/serio/i8042.c: 76 <- i8042 (return) [1]
>drivers/input/serio/i8042.c: a8 -> i8042 (command) [1]
>drivers/input/serio/i8042.c: 20 -> i8042 (command) [1]
>drivers/input/serio/i8042.c: 56 <- i8042 (return) [1]
>drivers/input/serio/i8042.c: 60 -> i8042 (command) [1]
>drivers/input/serio/i8042.c: 74 -> i8042 (parameter) [1]
>drivers/input/serio/i8042.c: d3 -> i8042 (command) [1]
>drivers/input/serio/i8042.c: f0 -> i8042 (parameter) [1]
>drivers/input/serio/i8042.c:      -- i8042 (timeout) [528]
>drivers/input/serio/i8042.c: 60 -> i8042 (command) [528]
>drivers/input/serio/i8042.c: 54 -> i8042 (parameter) [528]
>serio: i8042 AUX port at 0x60,0x64 irq 12
>i8042_init: i8042_mux_present 0 i8042_aux_port -1053345792
>i8042_setup_aux_irq: 
>i8042_enable_aux_port: 
>drivers/input/serio/i8042.c: 60 -> i8042 (command) [529]
>drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [529]
>i8042_setup_aux_irq: i8042_enable_aux_port ret 0
>i8042_init: i8042_kbd_port 0xc1373600
>drivers/input/serio/i8042.c: 60 -> i8042 (command) [529]
>drivers/input/serio/i8042.c: 46 -> i8042 (parameter) [529]
>serio: i8042 KBD port at 0x60,0x64 irq 1
>i8042_setup_kbd_irq: 
>i8042_enable_kbd_port: 
>drivers/input/serio/i8042.c: 60 -> i8042 (command) [529]
>drivers/input/serio/i8042.c: 47 -> i8042 (parameter) [529]
>Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>PIIX4: IDE controller at PCI slot 0000:00:07.1
>PIIX4: chipset revision 1
>PIIX4: not 100% native mode: will probe irqs later
>    ide1: BM-DMA at 0x10c8-0x10cf, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide1...
>hdc: VMware Virtual IDE CDROM Drive, ATAPI CD/DVD-ROM drive
>Using cfq io scheduler
>ide1 at 0x170-0x177,0x376 on irq 15
>Probing IDE interface ide0...
>Probing IDE interface ide2...
>Probing IDE interface ide3...
>Probing IDE interface ide4...
>Probing IDE interface ide5...
>hdc: ATAPI 1X CD-ROM drive, 32kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>drivers/input/serio/i8042.c: d4 -> i8042 (command) [4602]
>drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [4602]
>drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [4602]
>i8042_interrupt str: 0x35
>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 0) [4603]
>i8042_interrupt str: 0x35
>drivers/input/serio/i8042.c: d4 -> i8042 (command) [5103]
>drivers/input/serio/i8042.c: ed -> i8042 (parameter) [5103]
>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [5103]
>i8042_interrupt str: 0x35
>drivers/input/serio/i8042.c: d4 -> i8042 (command) [5104]
>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [5104]
>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [5104]
>i8042_interrupt str: 0x35
>drivers/input/serio/i8042.c: d4 -> i8042 (command) [5104]
>drivers/input/serio/i8042.c: ed -> i8042 (parameter) [5104]
>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [5104]
>i8042_interrupt str: 0x35
>drivers/input/serio/i8042.c: d4 -> i8042 (command) [5104]
>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [5104]
>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [5105]
>i8042_interrupt str: 0x35
>drivers/input/serio/i8042.c: d4 -> i8042 (command) [5105]
>drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [5105]
>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [5106]
>i8042_interrupt str: 0x35
>drivers/input/serio/i8042.c: d4 -> i8042 (command) [5106]
>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [5106]
>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [5106]
>i8042_interrupt str: 0x35
>drivers/input/serio/i8042.c: d4 -> i8042 (command) [5107]
>drivers/input/serio/i8042.c: f4 -> i8042 (parameter) [5107]
>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [5107]
>i8042_interrupt str: 0x35
>input: AT Raw Set 2 keyboard on isa0060/serio1
>drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [5133]
>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [5133]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: ab <- i8042 (interrupt, kbd, 1) [5135]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 41 <- i8042 (interrupt, kbd, 1) [5136]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [5136]
>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [5137]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [5137]
>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [5138]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: f3 -> i8042 (kbd-data) [5138]
>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [5139]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [5139]
>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [5140]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: f4 -> i8042 (kbd-data) [5140]
>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [5141]
>i8042_interrupt str: 0x15
>input: AT Translated Set 2 keyboard on isa0060/serio0
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 6, 262144 bytes)
>TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI wakeup devices: 
>PCI0  USB P2P0 S1F0 S2F0 S3F0 S4F0 PE40 PE50 PE60 PE70 PE41 PE42 PE43 PE44 PE45 PE46 PE47 PE51 PE52 PE53 PE54 PE55 PE56 PE57 PE61 PE62 PE63 PE64 PE65 PE66 PE67 PE71 PE72 PE73 PE74 PE75 PE76 PE77 SLPB 
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 192k freed
>SCSI subsystem initialized
>Fusion MPT base driver 3.12.19.00rh
>Copyright (c) 1999-2007 LSI Corporation
>Fusion MPT SPI Host driver 3.12.19.00rh
>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 177
>mptbase: Initiating ioc0 bringup
>ioc0: 53C1030: Capabilities={Initiator}
>scsi0 : ioc0: LSI53C1030, FwRev=00000000h, Ports=1, MaxQ=128, IRQ=177
>  Vendor: VMware,   Model: VMware Virtual S  Rev: 1.0 
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>SCSI device sda: 16777216 512-byte hdwr sectors (8590 MB)
>sda: cache data unavailable
>sda: assuming drive cache: write through
>SCSI device sda: 16777216 512-byte hdwr sectors (8590 MB)
>sda: cache data unavailable
>sda: assuming drive cache: write through
> sda: sda1 sda2 sda3 sda4 < sda5 >
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>Fusion MPT SAS Host driver 3.12.19.00rh
>libata version 2.00 loaded.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 4 roles, 356 types, 26 bools
>security:  55 classes, 22665 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>inserting floppy driver for 2.6.9-75.EL.TEST.bz450918.2smp
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>pcnet32.c:v1.31 29.04.2005 tsbogend@alpha.franken.de
>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 193
>pcnet32: PCnet/PCI II 79C970A at 0x2000, 00 0c 29 c2 96 04 assigned IRQ 193.
>divert: allocating divert_blk for eth0
>eth0: registered as PCnet/PCI II 79C970A
>pcnet32: 1 cards_found.
>ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 16 (level, low) -> IRQ 169
>pciehp: acpi_pciehprm:   Slot sun(20) at s:b:d:f=0x00:02:00:00
>pciehp: acpi_pciehprm:   Slot sun(21) at s:b:d:f=0x00:02:01:00
>pciehp: acpi_pciehprm:   Slot sun(22) at s:b:d:f=0x00:02:02:00
>pciehp: acpi_pciehprm:   Slot sun(23) at s:b:d:f=0x00:02:03:00
>pciehp: acpi_pciehprm:   Slot sun(24) at s:b:d:f=0x00:02:04:00
>pciehp: acpi_pciehprm:   Slot sun(25) at s:b:d:f=0x00:02:05:00
>pciehp: acpi_pciehprm:   Slot sun(26) at s:b:d:f=0x00:02:06:00
>pciehp: acpi_pciehprm:   Slot sun(27) at s:b:d:f=0x00:02:07:00
>pciehp: acpi_pciehprm:   Slot sun(28) at s:b:d:f=0x00:02:08:00
>pciehp: acpi_pciehprm:   Slot sun(29) at s:b:d:f=0x00:02:09:00
>pciehp: acpi_pciehprm:   Slot sun(2a) at s:b:d:f=0x00:02:0a:00
>pciehp: acpi_pciehprm:   Slot sun(2b) at s:b:d:f=0x00:02:0b:00
>pciehp: acpi_pciehprm:   Slot sun(2c) at s:b:d:f=0x00:02:0c:00
>pciehp: acpi_pciehprm:   Slot sun(2d) at s:b:d:f=0x00:02:0d:00
>pciehp: acpi_pciehprm:   Slot sun(2e) at s:b:d:f=0x00:02:0e:00
>pciehp: acpi_pciehprm:   Slot sun(2f) at s:b:d:f=0x00:02:0f:00
>pciehp: acpi_pciehprm:   Slot sun(30) at s:b:d:f=0x00:02:10:00
>pciehp: acpi_pciehprm:   Slot sun(31) at s:b:d:f=0x00:02:11:00
>pciehp: acpi_pciehprm:   Slot sun(32) at s:b:d:f=0x00:02:12:00
>pciehp: acpi_pciehprm:   Slot sun(33) at s:b:d:f=0x00:02:13:00
>pciehp: acpi_pciehprm:   Slot sun(34) at s:b:d:f=0x00:02:14:00
>pciehp: acpi_pciehprm:   Slot sun(35) at s:b:d:f=0x00:02:15:00
>pciehp: acpi_pciehprm:   Slot sun(36) at s:b:d:f=0x00:02:16:00
>pciehp: acpi_pciehprm:   Slot sun(37) at s:b:d:f=0x00:02:17:00
>pciehp: acpi_pciehprm:   Slot sun(38) at s:b:d:f=0x00:02:18:00
>pciehp: acpi_pciehprm:   Slot sun(39) at s:b:d:f=0x00:02:19:00
>pciehp: acpi_pciehprm:   Slot sun(3a) at s:b:d:f=0x00:02:1a:00
>pciehp: acpi_pciehprm:   Slot sun(3b) at s:b:d:f=0x00:02:1b:00
>pciehp: acpi_pciehprm:   Slot sun(3c) at s:b:d:f=0x00:02:1c:00
>pciehp: acpi_pciehprm:   Slot sun(3d) at s:b:d:f=0x00:02:1d:00
>pciehp: acpi_pciehprm:   Slot sun(3e) at s:b:d:f=0x00:02:1e:00
>pciehp: acpi_pciehprm:   Slot sun(3f) at s:b:d:f=0x00:02:1f:00
>pciehp: acpi_pciehprm:   Slot sun(a0) at s:b:d:f=0x00:03:00:00
>pciehp: acpi_pciehprm:   Slot sun(c0) at s:b:d:f=0x00:0b:00:00
>pciehp: acpi_pciehprm:   Slot sun(e0) at s:b:d:f=0x00:13:00:00
>pciehp: acpi_pciehprm:   Slot sun(100) at s:b:d:f=0x00:1b:00:00
>pciehp: acpi_pciehprm:   Slot sun(a1) at s:b:d:f=0x00:04:00:00
>pciehp: acpi_pciehprm:   Slot sun(a2) at s:b:d:f=0x00:05:00:00
>pciehp: acpi_pciehprm:   Slot sun(a3) at s:b:d:f=0x00:06:00:00
>pciehp: acpi_pciehprm:   Slot sun(a4) at s:b:d:f=0x00:07:00:00
>pciehp: acpi_pciehprm:   Slot sun(a5) at s:b:d:f=0x00:08:00:00
>pciehp: acpi_pciehprm:   Slot sun(a6) at s:b:d:f=0x00:09:00:00
>pciehp: acpi_pciehprm:   Slot sun(a7) at s:b:d:f=0x00:0a:00:00
>pciehp: acpi_pciehprm:   Slot sun(c1) at s:b:d:f=0x00:0c:00:00
>pciehp: acpi_pciehprm:   Slot sun(c2) at s:b:d:f=0x00:0d:00:00
>pciehp: acpi_pciehprm:   Slot sun(c3) at s:b:d:f=0x00:0e:00:00
>pciehp: acpi_pciehprm:   Slot sun(c4) at s:b:d:f=0x00:0f:00:00
>pciehp: acpi_pciehprm:   Slot sun(c5) at s:b:d:f=0x00:10:00:00
>pciehp: acpi_pciehprm:   Slot sun(c6) at s:b:d:f=0x00:11:00:00
>pciehp: acpi_pciehprm:   Slot sun(c7) at s:b:d:f=0x00:12:00:00
>pciehp: acpi_pciehprm:   Slot sun(e1) at s:b:d:f=0x00:14:00:00
>pciehp: acpi_pciehprm:   Slot sun(e2) at s:b:d:f=0x00:15:00:00
>pciehp: acpi_pciehprm:   Slot sun(e3) at s:b:d:f=0x00:16:00:00
>pciehp: acpi_pciehprm:   Slot sun(e4) at s:b:d:f=0x00:17:00:00
>pciehp: acpi_pciehprm:   Slot sun(e5) at s:b:d:f=0x00:18:00:00
>pciehp: acpi_pciehprm:   Slot sun(e6) at s:b:d:f=0x00:19:00:00
>pciehp: acpi_pciehprm:   Slot sun(e7) at s:b:d:f=0x00:1a:00:00
>pciehp: acpi_pciehprm:   Slot sun(101) at s:b:d:f=0x00:1c:00:00
>pciehp: acpi_pciehprm:   Slot sun(102) at s:b:d:f=0x00:1d:00:00
>pciehp: acpi_pciehprm:   Slot sun(103) at s:b:d:f=0x00:1e:00:00
>pciehp: acpi_pciehprm:   Slot sun(104) at s:b:d:f=0x00:1f:00:00
>pciehp: acpi_pciehprm:   Slot sun(105) at s:b:d:f=0x00:20:00:00
>pciehp: acpi_pciehprm:   Slot sun(106) at s:b:d:f=0x00:21:00:00
>pciehp: acpi_pciehprm:   Slot sun(107) at s:b:d:f=0x00:22:00:00
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>MSI INIT SUCCESS
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: bapr:  No  IO Resource on PCI 0x6.
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: bapr:  No  IO Resource on PCI 0x7.
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: bapr:  No  IO Resource on PCI 0x8.
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: bapr:  No  IO Resource on PCI 0x9.
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: bapr:  No  IO Resource on PCI 0xa.
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: bapr:  No  IO Resource on PCI 0xe.
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: bapr:  No  IO Resource on PCI 0xf.
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: bapr:  No  IO Resource on PCI 0x10.
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: bapr:  No  IO Resource on PCI 0x11.
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: bapr:  No  IO Resource on PCI 0x12.
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: bapr:  No  IO Resource on PCI 0x16.
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: bapr:  No  IO Resource on PCI 0x17.
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: bapr:  No  IO Resource on PCI 0x18.
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: bapr:  No  IO Resource on PCI 0x19.
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: bapr:  No  IO Resource on PCI 0x1a.
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: bapr:  No  IO Resource on PCI 0x1e.
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: bapr:  No  IO Resource on PCI 0x1f.
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: bapr:  No  IO Resource on PCI 0x20.
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: bapr:  No  IO Resource on PCI 0x21.
>pciehp: HPC vendor_id 15ad device_id 7a0 ss_vid 0 ss_did 0
>pciehp: bapr:  No  IO Resource on PCI 0x22.
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 17 (level, low) -> IRQ 177
>ehci_hcd 0000:02:03.0: EHCI Host Controller
>ehci_hcd 0000:02:03.0: irq 177, pci mem d0ab6000
>SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
>ehci_hcd 0000:02:03.0: new USB bus registered, assigned bus number 1
>PCI: cache line size of 64 is not supported by device 0000:02:03.0
>ehci_hcd 0000:02:03.0: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>USB Universal Host Controller Interface driver v2.2
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 185
>uhci_hcd 0000:02:00.0: UHCI Host Controller
>uhci_hcd 0000:02:00.0: irq 185, io base 000020c0
>uhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SLPB]
>EXT3 FS on sda2, internal journal
>device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>Adding 265032k swap on /dev/sda5.  Priority:-1 extents:1
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>parport0: PC-style at 0x378 [PCSPP,TRISTATE]
>powernow-k8: Found 1 AMD Opteron(tm) Processor 252 processors (1 cpu cores) (version 2.00.00-rhel4)
>powernow-k8: BIOS error - no PSB or ACPI _PSS objects
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_conntrack version 2.1 (2048 buckets, 16384 max) - 348 bytes per conntrack
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4
>acpiphp: Slot [32] registered
>acpiphp: Slot [33] registered
>acpiphp: Slot [34] registered
>acpiphp: Slot [35] registered
>acpiphp: Slot [36] registered
>acpiphp: Slot [37] registered
>acpiphp: Slot [38] registered
>acpiphp: Slot [39] registered
>acpiphp: Slot [40] registered
>acpiphp: Slot [41] registered
>acpiphp: Slot [42] registered
>acpiphp: Slot [43] registered
>acpiphp: Slot [44] registered
>acpiphp: Slot [45] registered
>acpiphp: Slot [46] registered
>acpiphp: Slot [47] registered
>acpiphp: Slot [48] registered
>acpiphp: Slot [49] registered
>acpiphp: Slot [50] registered
>acpiphp: Slot [51] registered
>acpiphp: Slot [52] registered
>acpiphp: Slot [53] registered
>acpiphp: Slot [54] registered
>acpiphp: Slot [55] registered
>acpiphp: Slot [56] registered
>acpiphp: Slot [57] registered
>acpiphp: Slot [58] registered
>acpiphp: Slot [59] registered
>acpiphp: Slot [60] registered
>acpiphp: Slot [61] registered
>acpiphp: Slot [62] registered
>acpiphp: Slot [63] registered
>kobject_register failed for 160 (-17)
> [<c01c42f7>] kobject_register+0x31/0x39
> [<c01cfd8e>] pci_hp_register+0x3d/0xa6
> [<d09c116a>] init_slots+0x146/0x1d4 [acpiphp]
> [<c0138e51>] sys_init_module+0xf8/0x240
> [<c02e0a0f>] syscall_call+0x7/0xb
>pci_hotplug: Unable to register kobject<3>acpiphp: pci_hp_register failed with error -22
>parport0: PC-style at 0x378 [PCSPP,TRISTATE]
>lp0: using parport0 (polling).
>lp0: console ready
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c0353520(lo)
>IPv6 over IPv4 tunneling driver
>divert: not allocating divert_blk for non-ethernet device sit0
>drivers/input/serio/i8042.c: 13 <- i8042 (interrupt, kbd, 1) [106148]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 93 <- i8042 (interrupt, kbd, 1) [106252]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, kbd, 1) [106296]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 98 <- i8042 (interrupt, kbd, 1) [106373]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, kbd, 1) [106461]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 98 <- i8042 (interrupt, kbd, 1) [106548]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, kbd, 1) [106611]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 94 <- i8042 (interrupt, kbd, 1) [106764]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, kbd, 1) [109133]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, kbd, 1) [109353]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 2f <- i8042 (interrupt, kbd, 1) [111763]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: af <- i8042 (interrupt, kbd, 1) [111884]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, kbd, 1) [111940]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 11 <- i8042 (interrupt, kbd, 1) [112017]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, kbd, 1) [112050]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 1e <- i8042 (interrupt, kbd, 1) [112092]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 91 <- i8042 (interrupt, kbd, 1) [112148]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 13 <- i8042 (interrupt, kbd, 1) [112180]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 9e <- i8042 (interrupt, kbd, 1) [112225]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, kbd, 1) [112258]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 93 <- i8042 (interrupt, kbd, 1) [112300]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, kbd, 1) [112388]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, kbd, 1) [112444]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, kbd, 1) [112545]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 26 <- i8042 (interrupt, kbd, 1) [121133]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: a6 <- i8042 (interrupt, kbd, 1) [121256]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, kbd, 1) [121268]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, kbd, 1) [121423]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, kbd, 1) [122381]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, kbd, 1) [122524]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, kbd, 1) [123757]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, kbd, 1) [123934]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, aux, 12) [125519]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x18 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 18 <keycode>' to make it known.
>drivers/input/serio/i8042.c: ff <- i8042 (interrupt, aux, 12) [125520]
>i8042_interrupt str: 0x35
>atkbd.c: Keyboard on isa0060/serio1 reports too many keys pressed.
>drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [125521]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x0 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
>drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, aux, 12) [125527]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x18 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 18 <keycode>' to make it known.
>drivers/input/serio/i8042.c: fd <- i8042 (interrupt, aux, 12) [125528]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x17d on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 7d <keycode>' to make it known.
>drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [125529]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x0 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
>drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, aux, 12) [125538]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x18 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 18 <keycode>' to make it known.
>drivers/input/serio/i8042.c: ff <- i8042 (interrupt, aux, 12) [125539]
>i8042_interrupt str: 0x35
>atkbd.c: Keyboard on isa0060/serio1 reports too many keys pressed.
>drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [125539]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x0 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
>drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, aux, 12) [125550]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x18 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 18 <keycode>' to make it known.
>drivers/input/serio/i8042.c: ff <- i8042 (interrupt, aux, 12) [125551]
>i8042_interrupt str: 0x35
>atkbd.c: Keyboard on isa0060/serio1 reports too many keys pressed.
>drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [125551]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x0 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
>drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, aux, 12) [125562]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x18 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 18 <keycode>' to make it known.
>drivers/input/serio/i8042.c: ff <- i8042 (interrupt, aux, 12) [125563]
>i8042_interrupt str: 0x35
>atkbd.c: Keyboard on isa0060/serio1 reports too many keys pressed.
>drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [125563]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x0 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
>drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, aux, 12) [125586]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x18 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 18 <keycode>' to make it known.
>drivers/input/serio/i8042.c: ff <- i8042 (interrupt, aux, 12) [125587]
>i8042_interrupt str: 0x35
>atkbd.c: Keyboard on isa0060/serio1 reports too many keys pressed.
>drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [125588]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x0 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
>drivers/input/serio/i8042.c: 38 <- i8042 (interrupt, aux, 12) [125621]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x38 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 38 <keycode>' to make it known.
>drivers/input/serio/i8042.c: ff <- i8042 (interrupt, aux, 12) [125622]
>i8042_interrupt str: 0x35
>atkbd.c: Keyboard on isa0060/serio1 reports too many keys pressed.
>drivers/input/serio/i8042.c: ff <- i8042 (interrupt, aux, 12) [125623]
>i8042_interrupt str: 0x35
>atkbd.c: Keyboard on isa0060/serio1 reports too many keys pressed.
>drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, aux, 12) [125633]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x18 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 18 <keycode>' to make it known.
>drivers/input/serio/i8042.c: ff <- i8042 (interrupt, aux, 12) [125634]
>i8042_interrupt str: 0x35
>atkbd.c: Keyboard on isa0060/serio1 reports too many keys pressed.
>drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [125635]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x0 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
>drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, aux, 12) [125655]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x18 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 18 <keycode>' to make it known.
>drivers/input/serio/i8042.c: ff <- i8042 (interrupt, aux, 12) [125656]
>i8042_interrupt str: 0x35
>atkbd.c: Keyboard on isa0060/serio1 reports too many keys pressed.
>drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [125657]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x0 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
>drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, aux, 12) [125663]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x18 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 18 <keycode>' to make it known.
>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux, 12) [125664]
>i8042_interrupt str: 0x35
>drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [125665]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x0 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
>drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, aux, 12) [125672]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x18 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 18 <keycode>' to make it known.
>drivers/input/serio/i8042.c: ff <- i8042 (interrupt, aux, 12) [125673]
>i8042_interrupt str: 0x35
>atkbd.c: Keyboard on isa0060/serio1 reports too many keys pressed.
>drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [125673]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x0 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
>drivers/input/serio/i8042.c: 38 <- i8042 (interrupt, aux, 12) [125679]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x38 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 38 <keycode>' to make it known.
>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux, 12) [125680]
>i8042_interrupt str: 0x35
>drivers/input/serio/i8042.c: ff <- i8042 (interrupt, aux, 12) [125680]
>i8042_interrupt str: 0x35
>atkbd.c: Keyboard on isa0060/serio1 reports too many keys pressed.
>drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, aux, 12) [125690]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x18 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 18 <keycode>' to make it known.
>drivers/input/serio/i8042.c: ff <- i8042 (interrupt, aux, 12) [125691]
>i8042_interrupt str: 0x35
>atkbd.c: Keyboard on isa0060/serio1 reports too many keys pressed.
>drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [125691]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x0 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
>drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, aux, 12) [125703]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x18 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 18 <keycode>' to make it known.
>drivers/input/serio/i8042.c: fd <- i8042 (interrupt, aux, 12) [125704]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x17d on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 7d <keycode>' to make it known.
>drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [125706]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x0 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
>drivers/input/serio/i8042.c: 38 <- i8042 (interrupt, aux, 12) [125711]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x38 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 38 <keycode>' to make it known.
>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [125712]
>i8042_interrupt str: 0x35
>drivers/input/serio/i8042.c: ff <- i8042 (interrupt, aux, 12) [125712]
>i8042_interrupt str: 0x35
>atkbd.c: Keyboard on isa0060/serio1 reports too many keys pressed.
>drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, aux, 12) [125719]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x18 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 18 <keycode>' to make it known.
>drivers/input/serio/i8042.c: fb <- i8042 (interrupt, aux, 12) [125721]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x17b on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 7b <keycode>' to make it known.
>drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [125722]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x0 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
>drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, aux, 12) [125732]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x18 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 18 <keycode>' to make it known.
>drivers/input/serio/i8042.c: ff <- i8042 (interrupt, aux, 12) [125733]
>i8042_interrupt str: 0x35
>atkbd.c: Keyboard on isa0060/serio1 reports too many keys pressed.
>drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [125733]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x0 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
>drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, aux, 12) [125744]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x18 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 18 <keycode>' to make it known.
>drivers/input/serio/i8042.c: ff <- i8042 (interrupt, aux, 12) [125745]
>i8042_interrupt str: 0x35
>atkbd.c: Keyboard on isa0060/serio1 reports too many keys pressed.
>drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [125746]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x0 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
>drivers/input/serio/i8042.c: 08 <- i8042 (interrupt, aux, 12) [126012]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x8 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 08 <keycode>' to make it known.
>drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [126013]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x0 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
>drivers/input/serio/i8042.c: 01 <- i8042 (interrupt, aux, 12) [126014]
>i8042_interrupt str: 0x35
>drivers/input/serio/i8042.c: 08 <- i8042 (interrupt, aux, 12) [126079]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x8 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 08 <keycode>' to make it known.
>drivers/input/serio/i8042.c: 01 <- i8042 (interrupt, aux, 12) [126080]
>i8042_interrupt str: 0x35
>drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [126081]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x0 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
>drivers/input/serio/i8042.c: 08 <- i8042 (interrupt, aux, 12) [126103]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x8 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 08 <keycode>' to make it known.
>drivers/input/serio/i8042.c: 01 <- i8042 (interrupt, aux, 12) [126104]
>i8042_interrupt str: 0x35
>drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [126104]
>i8042_interrupt str: 0x35
>atkbd.c: Unknown key pressed (raw set 2, code 0x0 on isa0060/serio1).
>atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
>drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, kbd, 1) [127721]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, kbd, 1) [127918]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, kbd, 1) [128774]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, kbd, 1) [128906]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, kbd, 1) [129719]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, kbd, 1) [129839]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 19 <- i8042 (interrupt, kbd, 1) [132183]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 11 <- i8042 (interrupt, kbd, 1) [132247]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 99 <- i8042 (interrupt, kbd, 1) [132281]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, kbd, 1) [132304]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 91 <- i8042 (interrupt, kbd, 1) [132391]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, kbd, 1) [132480]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, kbd, 1) [132511]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, kbd, 1) [132567]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 2e <- i8042 (interrupt, kbd, 1) [133543]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: ae <- i8042 (interrupt, kbd, 1) [133622]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, kbd, 1) [133734]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, kbd, 1) [133823]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, kbd, 1) [133836]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 35 <- i8042 (interrupt, kbd, 1) [133948]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, kbd, 1) [133961]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: b5 <- i8042 (interrupt, kbd, 1) [134071]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 13 <- i8042 (interrupt, kbd, 1) [134326]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 93 <- i8042 (interrupt, kbd, 1) [134449]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, kbd, 1) [134527]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 98 <- i8042 (interrupt, kbd, 1) [134606]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, kbd, 1) [134696]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 98 <- i8042 (interrupt, kbd, 1) [134776]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, kbd, 1) [134844]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 94 <- i8042 (interrupt, kbd, 1) [134967]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, kbd, 1) [134990]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, kbd, 1) [135055]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 2e <- i8042 (interrupt, kbd, 1) [136224]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: ae <- i8042 (interrupt, kbd, 1) [136304]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, kbd, 1) [136391]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, kbd, 1) [136515]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, kbd, 1) [136573]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, kbd, 1) [136716]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, kbd, 1) [147834]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, kbd, 1) [148057]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, kbd, 1) [155602]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, kbd, 1) [155736]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, kbd, 1) [155914]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, kbd, 1) [156026]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, kbd, 1) [156026]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, kbd, 1) [156146]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, kbd, 1) [156280]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, kbd, 1) [156414]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 22 <- i8042 (interrupt, kbd, 1) [156537]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: a2 <- i8042 (interrupt, kbd, 1) [156714]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, kbd, 1) [158048]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, kbd, 1) [158223]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, kbd, 1) [159422]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 98 <- i8042 (interrupt, kbd, 1) [159543]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 16 <- i8042 (interrupt, kbd, 1) [159785]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 96 <- i8042 (interrupt, kbd, 1) [159895]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, kbd, 1) [160114]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 94 <- i8042 (interrupt, kbd, 1) [160235]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 19 <- i8042 (interrupt, kbd, 1) [160386]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 99 <- i8042 (interrupt, kbd, 1) [160507]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 16 <- i8042 (interrupt, kbd, 1) [160540]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 96 <- i8042 (interrupt, kbd, 1) [160639]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, kbd, 1) [160728]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 94 <- i8042 (interrupt, kbd, 1) [160849]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, kbd, 1) [161379]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [161511]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, kbd, 1) [161523]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 34 <- i8042 (interrupt, kbd, 1) [161654]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: b4 <- i8042 (interrupt, kbd, 1) [161762]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: aa <- i8042 (interrupt, kbd, 1) [161850]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, kbd, 1) [162259]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, kbd, 1) [162413]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, kbd, 1) [165955]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, kbd, 1) [166078]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, kbd, 1) [166323]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, kbd, 1) [166475]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, kbd, 1) [166488]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, kbd, 1) [166590]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, kbd, 1) [167230]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, kbd, 1) [167353]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 22 <- i8042 (interrupt, kbd, 1) [167630]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: a2 <- i8042 (interrupt, kbd, 1) [167786]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [168386]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 0c <- i8042 (interrupt, kbd, 1) [168542]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 8c <- i8042 (interrupt, kbd, 1) [168619]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: aa <- i8042 (interrupt, kbd, 1) [168620]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, kbd, 1) [168996]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 98 <- i8042 (interrupt, kbd, 1) [169131]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 16 <- i8042 (interrupt, kbd, 1) [169140]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 96 <- i8042 (interrupt, kbd, 1) [169251]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, kbd, 1) [169283]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 94 <- i8042 (interrupt, kbd, 1) [169396]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 34 <- i8042 (interrupt, kbd, 1) [169950]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: b4 <- i8042 (interrupt, kbd, 1) [170093]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 25 <- i8042 (interrupt, kbd, 1) [172668]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: a5 <- i8042 (interrupt, kbd, 1) [172823]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, kbd, 1) [173668]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 13 <- i8042 (interrupt, kbd, 1) [173802]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, kbd, 1) [173869]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 93 <- i8042 (interrupt, kbd, 1) [173969]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 31 <- i8042 (interrupt, kbd, 1) [174068]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: b1 <- i8042 (interrupt, kbd, 1) [174189]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, kbd, 1) [174728]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, kbd, 1) [174849]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 26 <- i8042 (interrupt, kbd, 1) [174860]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: a6 <- i8042 (interrupt, kbd, 1) [174980]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 03 <- i8042 (interrupt, kbd, 1) [175354]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 83 <- i8042 (interrupt, kbd, 1) [175530]
>i8042_interrupt str: 0x15
>drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, kbd, 1) [176135]
>i8042_interrupt str: 0x15

Actions: View

Attachments on bug 450918: 308971 | 310711 | 310714 | 310736 | 310738 | 310867 | 310945