Attachment 311094 Details for Bug 454193 – lspci -vvv

lspci -vvv

lspci-vvv.out (text/plain), 25.49 KB, created by Jeff Layton on 2008-07-06 11:21:53 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jeff Layton

Created: 2008-07-06 11:21:53 UTC

Size: 25.49 KB

patch

obsolete

>00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
>	Subsystem: Foxconn International, Inc. Unknown device 0d00
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [44] HyperTransport: Slave or Primary Interface
>		Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
>		Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>		Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>		Link Control 1: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn+ ExtCTL- 64b-
>		Link Config 1: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
>		Revision ID: 1.03
>		Link Frequency 0: 1.0GHz
>		Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
>		Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>		Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
>		Link Frequency 1: 800MHz
>		Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
>		Link Frequency Capability 1: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>		Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
>		Prefetchable memory behind bridge Upper: 00-00
>		Bus Number: 00
>	Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed-
>		Mapping Address Base: 00000000fee00000
>
>00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
>	Subsystem: Foxconn International, Inc. Unknown device 0d00
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
>
>00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
>	Subsystem: Foxconn International, Inc. Unknown device 0d00
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
>	Subsystem: Foxconn International, Inc. Unknown device 0d00
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
>	Subsystem: Foxconn International, Inc. Unknown device 0d00
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>
>00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
>	Subsystem: Foxconn International, Inc. Unknown device 0d00
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [44] #00 [00fe]
>	Capabilities: [fc] #00 [0000]
>
>00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
>	Subsystem: Foxconn International, Inc. Unknown device 0d00
>	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
>	Subsystem: Foxconn International, Inc. Unknown device 0d00
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	I/O behind bridge: 0000a000-0000afff
>	Memory behind bridge: fdd00000-fddfffff
>	Prefetchable memory behind bridge: 00000000fda00000-00000000fdafffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
>		Mapping Address Base: 00000000fee00000
>	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 512 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #2, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <512ns, L1 <4us
>			ClockPM- Suprise- LLActRep+ BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
>			Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Off, PwrInd On, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>			Changed: MRL- PresDet- LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [100] Virtual Channel <?>
>	Kernel driver in use: pcieport-driver
>
>00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>	I/O behind bridge: 00008000-00008fff
>	Memory behind bridge: fd900000-fd9fffff
>	Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
>		Mapping Address Base: 00000000fee00000
>	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 512 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <512ns, L1 <4us
>			ClockPM- Suprise- LLActRep+ BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
>			Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Off, PwrInd On, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>			Changed: MRL- PresDet- LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [100] Virtual Channel <?>
>	Kernel driver in use: pcieport-driver
>
>00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>	I/O behind bridge: 0000b000-0000bfff
>	Memory behind bridge: fa000000-fcffffff
>	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
>		Mapping Address Base: 00000000fee00000
>	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 512 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s, Latency L0 <512ns, L1 <4us
>			ClockPM- Suprise- LLActRep+ BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
>			Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Off, PwrInd On, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet+ LinkState+
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [100] Virtual Channel <?>
>	Kernel driver in use: pcieport-driver
>
>00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
>	Subsystem: Foxconn International, Inc. Unknown device 0d00
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [44] HyperTransport: Slave or Primary Interface
>		Command: BaseUnitID=9 UnitCnt=15 MastHost- DefDir- DUL-
>		Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn+ ExtCTL- 64b-
>		Link Config 0: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
>		Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>		Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
>		Revision ID: 1.03
>		Link Frequency 0: 800MHz
>		Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
>		Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>		Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
>		Link Frequency 1: 200MHz
>		Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
>		Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>		Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
>		Prefetchable memory behind bridge Upper: 00-00
>		Bus Number: 00
>	Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed-
>		Mapping Address Base: 00000000fee00000
>
>00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a2)
>	Subsystem: Foxconn International, Inc. Unknown device 0d00
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>
>00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a2)
>	Subsystem: Foxconn International, Inc. Unknown device 0d00
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin A routed to IRQ 11
>	Region 4: I/O ports at 1c00 [size=64]
>	Region 5: I/O ports at 1c40 [size=64]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: nForce2_smbus
>	Kernel modules: i2c-nforce2
>
>00:0a.2 RAM memory: nVidia Corporation MCP51 Memory Controller 0 (rev a2)
>	Subsystem: Foxconn International, Inc. Unknown device 0d00
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2) (prog-if 10 [OHCI])
>	Subsystem: Foxconn International, Inc. Unknown device 0d00
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0 (750ns min, 250ns max)
>	Interrupt: pin A routed to IRQ 22
>	Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: ohci_hcd
>	Kernel modules: ohci-hcd
>
>00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2) (prog-if 20 [EHCI])
>	Subsystem: Foxconn International, Inc. Unknown device 0d00
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0 (750ns min, 250ns max)
>	Interrupt: pin B routed to IRQ 23
>	Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [44] Debug port: BAR=1 offset=0098
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME+
>	Kernel driver in use: ehci_hcd
>	Kernel modules: ehci-hcd
>
>00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) (prog-if 8a [Master SecP PriP])
>	Subsystem: Unknown device f05b:0d00
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0 (750ns min, 250ns max)
>	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
>	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
>	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
>	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
>	Region 4: I/O ports at f400 [size=16]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: pata_amd
>	Kernel modules: pata_amd
>
>00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
>	Subsystem: Foxconn International, Inc. Unknown device 0d00
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0 (750ns min, 250ns max)
>	Interrupt: pin A routed to IRQ 21
>	Region 0: I/O ports at 09f0 [size=8]
>	Region 1: I/O ports at 0bf0 [size=4]
>	Region 2: I/O ports at 0970 [size=8]
>	Region 3: I/O ports at 0b70 [size=4]
>	Region 4: I/O ports at e000 [size=16]
>	Region 5: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
>	Kernel driver in use: sata_nv
>	Kernel modules: sata_nv
>
>00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
>	Subsystem: Foxconn International, Inc. Unknown device 0d00
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0 (750ns min, 250ns max)
>	Interrupt: pin A routed to IRQ 20
>	Region 0: I/O ports at 09e0 [size=8]
>	Region 1: I/O ports at 0be0 [size=4]
>	Region 2: I/O ports at 0960 [size=8]
>	Region 3: I/O ports at 0b60 [size=4]
>	Region 4: I/O ports at cc00 [size=16]
>	Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
>	Kernel driver in use: sata_nv
>	Kernel modules: sata_nv
>
>00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
>	I/O behind bridge: 00009000-00009fff
>	Memory behind bridge: fdc00000-fdcfffff
>	Prefetchable memory behind bridge: fdb00000-fdbfffff
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [b8] Subsystem: Gammagraphx, Inc. Unknown device 0000
>	Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-
>		Mapping Address Base: 00000000fee00000
>
>00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
>	Subsystem: Foxconn International, Inc. Unknown device 0d00
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0 (500ns min, 1250ns max)
>	Interrupt: pin B routed to IRQ 22
>	Region 0: Memory at fe024000 (32-bit, non-prefetchable) [size=16K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>		Masking: 00000000  Pending: 00000000
>	Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
>	Kernel driver in use: HDA Intel
>	Kernel modules: snd-hda-intel
>
>00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a1)
>	Subsystem: Foxconn International, Inc. Unknown device 0d00
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0 (250ns min, 5000ns max)
>	Interrupt: pin A routed to IRQ 23
>	Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
>	Region 1: I/O ports at c800 [size=8]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
>	Kernel driver in use: forcedeth
>	Kernel modules: forcedeth
>
>00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Capabilities: [80] HyperTransport: Host or Secondary Interface
>		!!! Possibly incomplete decoding
>		Command: WarmRst+ DblEnd-
>		Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
>		Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
>		Revision ID: 1.02
>
>00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Kernel driver in use: k8temp
>	Kernel modules: k8temp
>
>03:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600 GT] (rev a1) (prog-if 00 [VGA controller])
>	Subsystem: eVga.com. Corp. Unknown device c615
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
>	Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
>	Region 3: Memory at fb000000 (64-bit, non-prefetchable) [size=16M]
>	Region 5: I/O ports at bc00 [size=128]
>	[virtual] Expansion ROM at fc000000 [disabled] [size=128K]
>	Capabilities: [60] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [78] Express (v1) Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <4us
>			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 512 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Capabilities: [100] Virtual Channel <?>
>	Capabilities: [128] Power Budgeting <?>
>	Kernel driver in use: nvidia
>	Kernel modules: nvidiafb, nvidia
>
>04:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
>	Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32 (8000ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at fdcff000 (32-bit, non-prefetchable) [size=2K]
>	Region 1: I/O ports at 9c00 [size=128]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: firewire_ohci
>	Kernel modules: firewire-ohci
>

Actions: View

Attachments on bug 454193: 311093 | 311094 | 311096 | 314868 | 314869 | 314870 | 323078