Attachment 311195 Details for Bug 450401 – log of failed association

log of failed association

wpa_supplicant.log (text/plain), 4.76 KB, created by Bob Hockney on 2008-07-07 17:04:21 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bob Hockney

Created: 2008-07-07 17:04:21 UTC

Size: 4.76 KB

patch

obsolete

># wpa_supplicant -du  -c /etc/wpa_supplicant/wpa_supplicant.conf -i wlan0 -Dwext
>
>Providing DBus service 'fi.epitest.hostap.WPASupplicant'.
>Initializing interface 'wlan0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
>Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf'
>Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
>ctrl_interface='/var/run/wpa_supplicant'
>ap_scan=1
>Priority group 0
>   id=0 ssid='fordprefect'
>Initializing interface (2) 'wlan0'
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: KEY_RX entering state NO_KEY_RECEIVE
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
>  capabilities: key_mgmt 0xf enc 0xf
>WEXT: Operstate: linkmode=1, operstate=5
>Own MAC address: 00:11:50:13:85:e8
>wpa_driver_wext_set_wpa
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>wpa_driver_wext_set_countermeasures
>wpa_driver_wext_set_drop_unencrypted
>Setting scan request: 0 sec 100000 usec
>Added interface wlan0
>RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
>Wireless event: cmd=0x8b06 len=8
>Ignore event for foreign ifindex 3
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>State: DISCONNECTED -> SCANNING
>Starting AP scan (broadcast SSID)
>Trying to get current scan results first without requesting a new scan to speed up initial association
>Scan results: -1
>Failed to get scan results
>Failed to get scan results - try scanning again
>Setting scan request: 0 sec 0 usec
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 5 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b19 len=8
>Received 0 bytes of scan results (0 BSSes)
>Scan results: 0
>Selecting BSS from priority group 0
>Try to find WPA-enabled AP
>Try to find non-WPA AP
>No suitable AP found.
>Setting scan request: 5 sec 0 usec
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b19 len=8
>Received 0 bytes of scan results (0 BSSes)
>Scan results: 0
>Selecting BSS from priority group 0
>Try to find WPA-enabled AP
>Try to find non-WPA AP
>No suitable AP found.
>Setting scan request: 5 sec 0 usec
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b19 len=8
>Received 318 bytes of scan results (1 BSSes)
>Scan results: 1
>Selecting BSS from priority group 0
>Try to find WPA-enabled AP
>0: 00:1e:2a:56:6f:8a ssid='fordprefect' wpa_ie_len=30 rsn_ie_len=26 caps=0x11
>   selected based on RSN IE
>   selected WPA AP 00:1e:2a:56:6f:8a ssid='fordprefect'
>Try to find non-WPA AP
>Trying to associate with 00:1e:2a:56:6f:8a (SSID='fordprefect' freq=2437 MHz)
>Cancelling scan request
>WPA: clearing own WPA/RSN IE
>Automatic auth_alg selection: 0x1
>RSN: using IEEE 802.11i/D9.0
>WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 2
>WPA: set AP WPA IE - hexdump(len=30): dd 1c 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 0c 00
>WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 04 00 0f ac 02 01 00 00 0f ac 02 0c 00
>WPA: using GTK TKIP
>WPA: using PTK CCMP
>WPA: using KEY_MGMT WPA-PSK
>WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
>No keys have been configured - skip key clearing
>wpa_driver_wext_set_drop_unencrypted
>State: SCANNING -> ASSOCIATING
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>wpa_driver_wext_associate
>Setting authentication timeout: 20 sec 0 usec
>EAPOL: External notification - EAP success=0
>EAPOL: External notification - EAP fail=0
>EAPOL: External notification - portControl=Auto
>RSN: Ignored PMKID candidate without preauth flag
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b06 len=8
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b04 len=12
>Authentication with 00:1e:2a:56:6f:8a timed out.
>Added BSSID 00:1e:2a:56:6f:8a into blacklist
>No keys have been configured - skip key clearing
>State: ASSOCIATING -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - EAP success=0

Actions: View

Attachments on bug 450401: 309399 | 309979 | 311195