Attachment 311301 Details for Bug 453472 – Boot log 5.2 PAE kernel

Boot log 5.2 PAE kernel

52_boot.txt (text/plain), 17.59 KB, created by M Smith on 2008-07-08 17:58:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: M Smith

Created: 2008-07-08 17:58:06 UTC

Size: 17.59 KB

patch

obsolete

>
>PhoenixBIOS 4.0 Release 6.0                                                     
>Copyright 1985-2001 Phoenix Technologies Ltd.                                   
>All Rights Reserved                                                             
>                                                                                
>Supermicro X5DP8-G2/X5DPE-G2 BIOS Rev 1.4c                                      
>                                                                                
>CPU = 4 Intel(R) Xeon(TM) CPU 3.06GHz                                           
>System Bus at 533MHz                                                            
>Hyper-Threading Enabled                                                         
>8192M System RAM Passed                                                         
>512K L2 Cache SRAM Passed                                                       
>System BIOS shadowed                                                            
>Video BIOS shadowed                                                             
>Mouse initialized                                                               
>                                                                                
>
>
>                                                                                
>Booting the Controller Kernel......Controller started                           
>                                                                                
>Controller #00: Adaptec 2200S at PCI Bus:06, Dev:01, Func:00                    
>Waiting for Controller to Start....Controller started                           
>Controller monitor V4.0-0[6011], Controller kernel V4.0-0[6011]                 
>Controller POST operation successful                                            
>Controller Memory Size: 064 MB                                                  
>Ch#  ID# Lun#  Vendor    Product Info        Rev#                               
>-----------------------------------------------------                           
>0     0   0    SEAGATE   ST3146707LC         0003                               
>0     1   0    SEAGATE   ST3146707LC         0003                               
>0     2   0    SEAGATE   ST3146707LC         0003                               
>0     3   0    SEAGATE   ST3146707LC         0003                               
>0     4   0    SEAGATE   ST3146707LC         0003                               
>0     5   0    SEAGATE   ST3146707LC         0003                               
>0     6   0    SUPER     GEM318              0                                  
>                                                                                
>Array#0 - RAID-10     410.15 GB     Optimal                                     
>1 Array(s) Found                                                                
>                                                                                
>                                                                                
>BIOS Installed Successfully!                                                    
>                                                                                
>                                                     
>
>  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
>  ³                        PhoenixBIOS Setup Utility                        ³
>  ³                                                                         ³
>  ³ CPU Type        : Intel(R) Xeon(TM) CPU 3.06GHz                         ³
>  ³ CPU Speed       : 3.06 GHz          System ROM   : E56F - FFFF          ³
>  ³ System Memory   : 640 KB            BIOS Date    : 06/24/03             ³
>  ³ Extended Memory : 8387584 KB                                            ³
>  ³ Shadow Ram      : 384 KB            COM Ports    : 03F8                 ³
>  ³ L2 Cache        : 512 KB            LPT Ports    : None                 ³
>  ³                                     Display Type : EGA \ VGA            ³
>  ³ Hard Disk 0     : None              PS/2 Mouse   : Installed            ³
>  ³ Hard Disk 1     : None                                                  ³
>  ³ Hard Disk 2     : None              Diskette A   : 1.44/1.25 MB  3«"    ³
>  ³ Hard Disk 3     : None              Diskette B   : Disabled             ³
>  ³                                                                         ³
>  ³ PCIX Slot 1/2/3 : 66MHz             PCIX Slot 4  : 66MHz                ³
>  ³ PCIX Slot 5     : 133MHz            PCIX Slot 6  : 133MHz               ³
>  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
>
>                            
>                         
>inux version 2.6.18-92.1.6.el5PAE (mockbuild@builder16.centos.org) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-42)) #1 SMP Wed Jun 25 14:21:46 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
> BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000efef9000 (usable)
> BIOS-e820: 00000000efef9000 - 00000000eff00000 (ACPI NVS)
> BIOS-e820: 00000000eff00000 - 00000000eff80000 (usable)
> BIOS-e820: 00000000eff80000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000210000000 (usable)
>7552MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f6810
>Memory for crash kernel (0x0 to 0x0) notwithin permissible range
>disabling kdump
>Using x86 segment limits to approximate NX protection
>DMI present.
>Using APIC driver default
>ACPI: Unable to locate RSDP
>Intel MultiProcessor Specification v1.4
>    Virtual Wire compatibility mode.
>OEM ID:   Product ID: Kings Canyon APIC at: 0xFEE00000
>Processor #6 15:2 APIC version 20
>Processor #0 15:2 APIC version 20
>Processor #1 15:2 APIC version 20
>Processor #7 15:2 APIC version 20
>I/O APIC #2 Version 32 at 0xFEC00000.
>I/O APIC #3 Version 32 at 0xFEC80000.
>I/O APIC #4 Version 32 at 0xFEC80400.
>I/O APIC #5 Version 32 at 0xFEC81000.
>I/O APIC #8 Version 32 at 0xFEC81400.
>Enabling APIC mode:  Flat.  Using 5 I/O APICs
>Processors: 4
>Allocating PCI resources starting at f1000000 (gap: f0000000:0ec00000)
>Detected 3056.716 MHz processor.
>Built 1 zonelists.  Total pages: 2162688
>Kernel command line: ro root=LABEL=/  console=tty0 console=ttyS0,38400n8 nmi_watchdog=1
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c074a000 soft=c072a000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 8311732k/8650752k available (2093k kernel code, 74980k reserved, 873k data, 228k init, 7470564k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 6115.65 BogoMIPS (lpj=3057827)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 3
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>CPU0: Intel(R) Xeon(TM) CPU 3.06GHz stepping 07
>SMP alternatives: switching to SMP code
>Booting processor 1/0 eip 3000
>CPU 1 irqstacks, hard=c074b000 soft=c072b000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6112.15 BogoMIPS (lpj=3056075)
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09
>SMP alternatives: switching to SMP code
>Booting processor 2/1 eip 3000
>CPU 2 irqstacks, hard=c074c000 soft=c072c000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 6112.16 BogoMIPS (lpj=3056084)
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#2.
>CPU2: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU2: Thermal monitoring enabled
>CPU2: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09
>SMP alternatives: switching to SMP code
>Booting processor 3/7 eip 3000
>CPU 3 irqstacks, hard=c074d000 soft=c072d000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 6112.09 BogoMIPS (lpj=3056046)
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 3
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#3.
>CPU3: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU3: Thermal monitoring enabled
>CPU3: Intel(R) Xeon(TM) CPU 3.06GHz stepping 07
>Total of 4 processors activated (24452.06 BogoMIPS).
>ExtINT not setup in hardware but reported by MP table
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
>checking TSC synchronization across 4 CPUs: passed.
>Brought up 4 CPUs
>migration_cost=85,702
>checking if image is initramfs... it is
>Freeing initrd memory: 2393k freed
>NET: Registered protocol family 16
>ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C5319AA0 could not acquire Mutex [2] [20060707]
>No dock devices found.
>ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C5319AA0 could not acquire Mutex [2] [20060707]
>PCI: PCI BIOS revision 2.10 entry at 0xfd875, last bus=7
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Probing PCI hardware
>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH4 GPIO
>PCI: Ignoring BAR0-1 of IDE controller 0000:00:1f.1
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Discovered primary peer bus 10 [IRQ]
>PCI: Discovered primary peer bus 11 [IRQ]
>PCI: Discovered primary peer bus 12 [IRQ]
>PCI: Using IRQ router PIIX/ICH [8086/2480] at 0000:00:1f.0
>PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 153
>PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 169
>PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 161
>PCI->APIC IRQ transform: 0000:03:02.0[A] -> IRQ 177
>PCI->APIC IRQ transform: 0000:03:02.1[B] -> IRQ 185
>PCI->APIC IRQ transform: 0000:06:01.0[A] -> IRQ 193
>PCI->APIC IRQ transform: 0000:06:02.0[A] -> IRQ 201
>PCI->APIC IRQ transform: 0000:06:02.1[B] -> IRQ 209
>PCI->APIC IRQ transform: 0000:07:01.0[A] -> IRQ 153
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Bridge: 0000:01:1d.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:01:1f.0
>  IO window: 3000-3fff
>  MEM window: f4200000-f42fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:02.0
>  IO window: 3000-3fff
>  MEM window: f4100000-f42fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:04:1d.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: mem resource #6:80000@fc000000 for 0000:06:02.1 was not allocated.
>PCI: Bridge: 0000:04:1f.0
>  IO window: 4000-4fff
>  MEM window: f4400000-f44fffff
>  PREFETCH window: f8000000-fbffffff
>PCI: Bridge: 0000:00:03.0
>  IO window: 4000-4fff
>  MEM window: f4300000-f44fffff
>  PREFETCH window: f8000000-fbffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 5000-5fff
>  MEM window: f4500000-f5ffffff
>  PREFETCH window: f1000000-f10fffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1215517739.337:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 78C1E0DBCDE18993
>- User ID: CentOS (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH3: IDE controller at PCI slot 0000:00:1f.1
>PCI: No IRQ known for interrupt pin A of device 0000:00:1f.1. Probably buggy MP table.
>ICH3: chipset revision 2
>ICH3: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x2060-0x2067, BIOS settings: hda:pio, hdb:pio
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Testing NMI watchdog ... <6>input: AT Translated Set 2 keyboard as /class/input/input0
>OK.
>Using IPI No-Shortcut mode
>Freeing unused kernel memory: 228k freed
>Time: tsc clocksource has been installed.
>Write protecting the kernel read-only data: 392k
>Red Hat nash version 5.1.19.6 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Setting up hotplug.
>Creating block device nodes.
>Loading ehci-hcd.ko module
>LoadinUSB Universal Host Controller Interface driver v3.0
>g ohci-hcd.ko mouhci_hcd 0000:00:1d.0: UHCI Host Controller
>dule
>Loading uhuhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>ci-hcd.ko moduleuhci_hcd 0000:00:1d.0: irq 153, io base 0x00002000
>
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 169, io base 0x00002020
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>input: ImPS/2 Generic Wheel Mouse as /class/input/input1
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 161, io base 0x00002040
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>Loading jbd.ko module
>Loading ext3.ko module
>Loading scsi_mod.ko module
>SCSI subsystem initialized
>Loading sd_mod.ko module
>Loading aacraid.ko module
>Adaptec aacraid driver 1.1-5[2453]
>AAC0: kernel 4.0-0[6011] 
>AAC0: monitor 4.0-0[6011]
>AAC0: bios 4.0-0[6011]
>AAC0: serial B7E06F
>AAC0: Non-DASD support enabled.
>AAC0: 64bit support enabled.
>AAC0: 64 Bit DAC enabled
>AAC:        NMI ISR: NMI_PRIMARY_ATU_ERROR
>scsi0 : aacraid
>  Vendor: ADAPTEC   Model: ADAMS RAID10      Rev: V1.0
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>SCSI device sda: 860149632 512-byte hdwr sectors (440397 MB)
>sda: Write Protect is off
>SCSI device sda: drive cache: write back
>SCSI device sda: 860149632 512-byte hdwr sectors (440397 MB)
>sda: Write Protect is off
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: Attached scsi removable disk sda
>aac_srb: aac_fib_send failed with status: 8195
>aac_srb: aac_fib_send failed with status: 8195
>aac_srb: aac_fib_send failed with status: 8195
>aac_srb: aac_fib_send failed with status: 8195
>aac_srb: aac_fib_send failed with status: 8195
>aac_srb: aac_fib_send failed with status: 8195
>aac_srb: aac_fib_send failed with status: 8195
>aac_srb: aac_fib_send failed with status: 8195
>aac_srb: aac_fib_send failed with status: 8195
>aac_srb: aac_fib_send failed with status: 8195
>aac_srb: aac_fib_send failed with status: 8195
>aac_srb: aac_fib_send failed with status: 8195
>aac_srb: aac_fib_send failed with status: 8195
>aac_srb: aac_fib_send failed with status: 8195
>aac_srb: aac_fib_send failed with status: 8195
>aac_srb: aac_fib_send failed with status: 8195
>aac_srb: aac_fib_send failed with status: 8195
>
>...

Actions: View

Attachments on bug 453472: 311301 | 311302 | 316322 | 316323 | 316437 | 316438 | 317232 | 317233 | 318091 | 319352