Attachment 311420 Details for Bug 405361 – dmesg with s1

dmesg with s1

dmesg_s1 (text/plain), 12.23 KB, created by Andrew Schultz on 2008-07-09 20:55:05 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Andrew Schultz

Created: 2008-07-09 20:55:05 UTC

Size: 12.23 KB

patch

obsolete

>Linux version 2.6.18-92.1.6.el5.bz405361.s1 (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-41)) #1 SMP Wed Jul 9 03:47:31 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ff80000 (usable)
> BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec04000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>found SMP MP-table at 000f7170
>Memory for crash kernel (0x0 to 0x0) notwithin permissible range
>disabling kdump
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 130944
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 126848 pages, LIFO batch:31
>DMI 2.3 present.
>Using APIC driver default
>ACPI: Unable to locate RSDP
>Intel MultiProcessor Specification v1.4
>    Virtual Wire compatibility mode.
>OEM ID: TYAN     Product ID: PAULANER     APIC at: 0xFEE00000
>Processor #1 6:10 APIC version 16
>Processor #0 6:10 APIC version 16
>I/O APIC #2 Version 17 at 0xFEC00000.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Processors: 2
>Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
>Detected 2133.470 MHz processor.
>Built 1 zonelists.  Total pages: 130944
>Kernel command line: ro root=/dev/system/root
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c074b000 soft=c072b000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 511600k/523776k available (2096k kernel code, 11500k reserved, 874k data, 228k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 4269.81 BogoMIPS (lpj=2134909)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: After all inits, caps: 0383f3ff c1cbfbff 00000000 00000420 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>CPU0: AMD Athlon(tm) MP 2800+ stepping 00
>SMP alternatives: switching to SMP code
>Booting processor 1/0 eip 3000
>CPU 1 irqstacks, hard=c074c000 soft=c072c000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4266.67 BogoMIPS (lpj=2133338)
>CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: After all inits, caps: 0383f3ff c1cbfbff 00000000 00000420 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: AMD Athlon(tm) Processor stepping 00
>Total of 2 processors activated (8536.49 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=136 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=52 bytes
>sizeof(skbuff)=172 bytes
>migration_cost=1444
>checking if image is initramfs... it is
>Freeing initrd memory: 2889k freed
>NET: Registered protocol family 16
>ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C149DAA0 could not acquire Mutex [2] [20060707]
>No dock devices found.
>ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C149DAA0 could not acquire Mutex [2] [20060707]
>PCI: PCI BIOS revision 2.10 entry at 0xfd7d0, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>mtrr: your CPUs had inconsistent fixed MTRR settings
>mtrr: probably your BIOS does not setup all CPUs.
>mtrr: corrected configuration.
>ACPI: Interpreter disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:05.0
>PCI->APIC IRQ transform: 0000:01:05.0[A] -> IRQ 161
>PCI->APIC IRQ transform: 0000:02:00.0[D] -> IRQ 169
>PCI->APIC IRQ transform: 0000:02:04.0[A] -> IRQ 153
>PCI->APIC IRQ transform: 0000:02:08.0[A] -> IRQ 169
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: mem resource #6:20000@fc000000 for 0000:01:05.0 was not allocated.
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: f0000000-f0ffffff
>  PREFETCH window: f8000000-fbffffff
>PCI: Bridge: 0000:00:10.0
>  IO window: 2000-2fff
>  MEM window: f1000000-f10fffff
>  PREFETCH window: 30000000-300fffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1215636428.846:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key CF90F4606A3C3BB8
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>BIOS failed to enable PCI standards compliance, fixing this error.
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected AMD 760MP chipset
>agpgart: AGP aperture is 64M @ 0xf4000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>AMD7441: IDE controller at PCI slot 0000:00:07.1
>AMD7441: chipset revision 4
>AMD7441: not 100% native mode: will probe irqs later
>AMD7441: 0000:00:07.1 (rev 04) UDMA100 controller
>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: ST340014A, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: TOSHIBA DVD-ROM SD-M1712, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 512KiB
>hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Processor cpuid 6a0 not supported
>powernow-k8: Processor cpuid 6a0 not supported
>Using IPI No-Shortcut mode
>Freeing unused kernel memory: 228k freed
>Write protecting the kernel read-only data: 393k
>input: AT Translated Set 2 keyboard as /class/input/input0
>logips2pp: Detected unknown logitech mouse model 1
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ohci_hcd 0000:02:00.0: OHCI Host Controller
>ohci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:02:00.0: irq 169, io mem 0xf1000000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>USB Universal Host Controller Interface driver v3.0
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
>input: PS/2 Logitech Mouse as /class/input/input1
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1215636433.213:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>security:  3 users, 6 roles, 1676 types, 213 bools, 1 sens, 1024 cats
>security:  61 classes, 60092 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1215636433.459:3): policy loaded auid=4294967295 ses=4294967295
>input: PC Speaker as /class/input/input2
>EDAC MC: Ver: 2.0.1 Jul  9 2008
>AMD768 RNG detected
>3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
>0000:02:08.0: 3Com PCI 3c905C Tornado at e0862000.
>gameport: EMU10K1 is pci0000:02:04.1/gameport0, io 0x20a0, speed 946kHz
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>hdc: ATAPI 48X DVD-ROM drive, 128kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
>parport0: irq 7 detected
>lp0: using parport0 (polling).
>lp0: console ready
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 1048568k swap on /dev/system/swap.  Priority:-1 extents:1 across:1048568k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

Actions: View

Attachments on bug 405361: 309838 | 309859 | 309891 | 309935 | 311328 | 311419 | 311420 | 311423 | 314399