Attachment 311425 Details for Bug 446074 – smartctl newly run on my reinstalled F8 system

smartctl newly run on my reinstalled F8 system

smartctl-20080709 (text/plain), 4.55 KB, created by Chris Schembari on 2008-07-09 21:31:12 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Chris Schembari

Created: 2008-07-09 21:31:12 UTC

Size: 4.55 KB

patch

obsolete

>smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
>Home page is http://smartmontools.sourceforge.net/
>
>=== START OF INFORMATION SECTION ===
>Model Family:     Western Digital Caviar SE family
>Device Model:     WDC WD800JB-00JJA0
>Serial Number:    WD-WMAM94197887
>Firmware Version: 05.01C05
>User Capacity:    80,026,361,856 bytes
>Device is:        In smartctl database [for details use: -P show]
>ATA Version is:   6
>ATA Standard is:  Exact ATA specification draft version not indicated
>Local Time is:    Wed Jul  9 16:12:43 2008 CDT
>SMART support is: Available - device has SMART capability.
>SMART support is: Enabled
>
>=== START OF READ SMART DATA SECTION ===
>SMART overall-health self-assessment test result: PASSED
>
>General SMART Values:
>Offline data collection status:  (0x84)	Offline data collection activity
>					was suspended by an interrupting command from host.
>					Auto Offline Data Collection: Enabled.
>Self-test execution status:      (   0)	The previous self-test routine completed
>					without error or no self-test has ever 
>					been run.
>Total time to complete Offline 
>data collection: 		 (2460) seconds.
>Offline data collection
>capabilities: 			 (0x7b) SMART execute Offline immediate.
>					Auto Offline data collection on/off support.
>					Suspend Offline collection upon new
>					command.
>					Offline surface scan supported.
>					Self-test supported.
>					Conveyance Self-test supported.
>					Selective Self-test supported.
>SMART capabilities:            (0x0003)	Saves SMART data before entering
>					power-saving mode.
>					Supports SMART auto save timer.
>Error logging capability:        (0x01)	Error logging supported.
>					No General Purpose Logging support.
>Short self-test routine 
>recommended polling time: 	 (   2) minutes.
>Extended self-test routine
>recommended polling time: 	 (  35) minutes.
>Conveyance self-test routine
>recommended polling time: 	 (   5) minutes.
>SCT capabilities: 	       (0x003f)	SCT Status supported.
>					SCT Feature Control supported.
>					SCT Data Table supported.
>
>SMART Attributes Data Structure revision number: 16
>Vendor Specific SMART Attributes with Thresholds:
>ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
>  1 Raw_Read_Error_Rate     0x000f   200   200   051    Pre-fail  Always       -       0
>  3 Spin_Up_Time            0x0003   164   163   021    Pre-fail  Always       -       2775
>  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1127
>  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
>  7 Seek_Error_Rate         0x000f   200   200   051    Pre-fail  Always       -       0
>  9 Power_On_Hours          0x0032   090   090   000    Old_age   Always       -       7928
> 10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always       -       0
> 11 Calibration_Retry_Count 0x0012   100   100   051    Old_age   Always       -       0
> 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       915
>194 Temperature_Celsius     0x0022   103   086   000    Old_age   Always       -       40
>196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
>197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
>198 Offline_Uncorrectable   0x0010   200   200   000    Old_age   Offline      -       0
>199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
>200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail  Offline      -       0
>
>SMART Error Log Version: 1
>No Errors Logged
>
>SMART Self-test log structure revision number 1
>Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
># 1  Extended offline    Completed without error       00%      7327         -
># 2  Extended offline    Completed without error       00%      7326         -
># 3  Extended offline    Aborted by host               90%      7325         -
># 4  Short offline       Completed without error       00%      2531         -
># 5  Extended offline    Aborted by host               90%      2531         -
>
>SMART Selective self-test log data structure revision number 1
> SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
>    1        0        0  Not_testing
>    2        0        0  Not_testing
>    3        0        0  Not_testing
>    4        0        0  Not_testing
>    5        0        0  Not_testing
>Selective self-test flags (0x0):
>  After scanning selected spans, do NOT read-scan remainder of disk.
>If Selective self-test is pending on power-up, resume after 0 minute delay.
>

Actions: View

Attachments on bug 446074: 305281 | 308316 | 311424 | 311425