Attachment 311497 Details for Bug 453445 – output of dmesg

output of dmesg

dmesg (text/plain), 63.65 KB, created by Homayoun Shahri on 2008-07-10 17:31:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Homayoun Shahri

Created: 2008-07-10 17:31:57 UTC

Size: 63.65 KB

patch

obsolete

>Linux version 2.6.18-92.1.6.el5 (mockbuild@builder16.centos.org) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-42)) #1 SMP Wed Jun 25 13:49:24 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
> BIOS-e820: 000000007fee0000 - 000000007fef3000 (ACPI data)
> BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI NVS)
> BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
>1150MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f68e0
>Memory for crash kernel (0x0 to 0x0) notwithin permissible range
>disabling kdump
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 524000
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 294624 pages, LIFO batch:31
>DMI present.
>Using APIC driver default
>ACPI: RSDP (v002 LENOVO                                ) @ 0x000f68a0
>ACPI: XSDT (v001 LENOVO TP-79    0x00001091  LTP 0x00000000) @ 0x7fee6132
>ACPI: FADT (v003 LENOVO TP-79    0x00001091 LNVO 0x00000001) @ 0x7fee6200
>ACPI: SSDT (v001 LENOVO TP-79    0x00001091 MSFT 0x0100000e) @ 0x7fee63b4
>ACPI: ECDT (v001 LENOVO TP-79    0x00001091 LNVO 0x00000001) @ 0x7fef2d3b
>ACPI: TCPA (v002 LENOVO TP-79    0x00001091 LNVO 0x00000001) @ 0x7fef2d8d
>ACPI: MADT (v001 LENOVO TP-79    0x00001091 LNVO 0x00000001) @ 0x7fef2dbf
>ACPI: MCFG (v001 LENOVO TP-79    0x00001091 LNVO 0x00000001) @ 0x7fef2e27
>ACPI: HPET (v001 LENOVO TP-79    0x00001091 LNVO 0x00000001) @ 0x7fef2e63
>ACPI: BOOT (v001 LENOVO TP-79    0x00001091  LTP 0x00000001) @ 0x7fef2fd8
>ACPI: SSDT (v001 LENOVO TP-79    0x00001091 INTL 0x20050513) @ 0x7fee56ab
>ACPI: SSDT (v001 LENOVO TP-79    0x00001091 INTL 0x20050513) @ 0x7fee54d3
>ACPI: DSDT (v001 LENOVO TP-79    0x00001091 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:14 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:14 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>Detected 1995.037 MHz processor.
>Built 1 zonelists.  Total pages: 524000
>Kernel command line: ro root=LABEL=/ rhgb quiet selinux=0 
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c074b000 soft=c072b000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2071172k/2096000k available (2096k kernel code, 23680k reserved, 874k data, 228k init, 1178496k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Using HPET for base-timer
>Calibrating delay using timer specific routine.. 3993.43 BogoMIPS (lpj=1996719)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00000940 0000c1a9 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz stepping 08
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c074c000 soft=c072c000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.03 BogoMIPS (lpj=1995016)
>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00000940 0000c1a9 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz stepping 08
>Total of 2 processors activated (7983.47 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: 
>CPU#0 had -158 usecs TSC skew, fixed it up.
>CPU#1 had 158 usecs TSC skew, fixed it up.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=136 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=52 bytes
>sizeof(skbuff)=172 bytes
>migration_cost=26
>checking if image is initramfs... it is
>Freeing initrd memory: 2356k freed
>NET: Registered protocol family 16
>ACPI: ACPI Dock Station Driver 
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>PCI: Buses that can't use MMCONFIG will use type 1 PCI conf access.
>Setting up standard PCI resources
>ACPI: Found ECDT
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:01:00.0
>PCI: If a device isn't working, try "pci=nommconf".
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: Embedded Controller [EC] (gpe 28) interrupt mode.
>ACPI: Power Resource [PUBS] (on)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Bridge: 0000:00:01.0
>  IO window: 2000-2fff
>  MEM window: ee100000-ee1fffff
>  PREFETCH window: d8000000-dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: 3000-3fff
>  MEM window: ee000000-ee0fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: 4000-5fff
>  MEM window: ec000000-edffffff
>  PREFETCH window: e4000000-e40fffff
>PCI: Bridge: 0000:00:1c.2
>  IO window: 6000-7fff
>  MEM window: e8000000-e9ffffff
>  PREFETCH window: e4100000-e41fffff
>PCI: Bridge: 0000:00:1c.3
>  IO window: 8000-9fff
>  MEM window: ea000000-ebffffff
>  PREFETCH window: e4200000-e42fffff
>PCI: Bus 22, cardbus bridge: 0000:15:00.0
>  IO window: 0000a000-0000a0ff
>  IO window: 0000a400-0000a4ff
>  PREFETCH window: e0000000-e1ffffff
>  MEM window: e6000000-e7ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: a000-dfff
>  MEM window: e4300000-e7ffffff
>  PREFETCH window: e0000000-e3ffffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x35 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1214806321.731:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 78C1E0DBCDE18993
>- User ID: CentOS (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>Allocate Port Service[0000:00:1c.2:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>Allocate Port Service[0000:00:1c.3:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
>ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
>ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THM0] (41 C)
>ACPI: Thermal Zone [THM1] (42 C)
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH7: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 169
>ICH7: chipset revision 2
>ICH7: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio
>Probing IDE interface ide0...
>hda: HL-DT-ST DVDRAM GSA-4083N, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012]
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:15:00.0, mfunc 0x01d01002, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 169
>Socket status: 30000007
>pcmcia: parent PCI bridge I/O window: 0xa000 - 0xdfff
>pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff
>pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 228k freed
>Time: tsc clocksource has been installed.
>Write protecting the kernel read-only data: 393k
>Time: hpet clocksource has been installed.
>input: AT Translated Set 2 keyboard as /class/input/input0
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 66
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 66, io mem 0xee404000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 74
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 74, io base 0x00001820
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 82
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 82, io base 0x00001840
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
>serio: Synaptics pass-through port at isa0060/serio1/input0
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 66
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 66, io base 0x00001860
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 169
>ahci 0000:00:1f.2: nr_ports (4) and implemented port map (0x1) don't match, using nr_ports
>ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>input: Dell Dell USB Mouse as /class/input/input2
>input: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:1d.0-1
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>usb 5-2: new full speed USB device using uhci_hcd and address 2
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404500 irq 90
>ata2: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404580 irq 90
>ata3: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404600 irq 90
>ata4: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404680 irq 90
>usb 5-2: configuration #1 chosen from 1 choice
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-6: TOSHIBA MK1032GSX, AS024E, max UDMA/100
>ata1.00: 195371568 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2: SATA link down (SStatus 0 SControl 0)
>ata3: SATA link down (SStatus 0 SControl 0)
>ata4: SATA link down (SStatus 0 SControl 0)
>  Vendor: ATA       Model: TOSHIBA MK1032GS  Rev: AS02
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
>sd 0:0:0:0: Attached scsi disk sda
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /class/input/input3
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: sda8: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 3618257
>ext3_orphan_cleanup: deleting unreferenced inode 3616952
>ext3_orphan_cleanup: deleting unreferenced inode 3179161
>ext3_orphan_cleanup: deleting unreferenced inode 3179297
>ext3_orphan_cleanup: deleting unreferenced inode 3614524
>ext3_orphan_cleanup: deleting unreferenced inode 3616016
>ext3_orphan_cleanup: deleting unreferenced inode 3613904
>ext3_orphan_cleanup: deleting unreferenced inode 1704049
>ext3_orphan_cleanup: deleting unreferenced inode 3604484
>ext3_orphan_cleanup: deleting unreferenced inode 3342341
>ext3_orphan_cleanup: deleting unreferenced inode 3609382
>ext3_orphan_cleanup: deleting unreferenced inode 3607879
>ext3_orphan_cleanup: deleting unreferenced inode 3607844
>ext3_orphan_cleanup: deleting unreferenced inode 3615995
>ext3_orphan_cleanup: deleting unreferenced inode 3614425
>ext3_orphan_cleanup: deleting unreferenced inode 1689263
>ext3_orphan_cleanup: deleting unreferenced inode 1689239
>ext3_orphan_cleanup: deleting unreferenced inode 1687800
>ext3_orphan_cleanup: deleting unreferenced inode 7307796
>ext3_orphan_cleanup: deleting unreferenced inode 7307791
>ext3_orphan_cleanup: deleting unreferenced inode 3615141
>ext3_orphan_cleanup: deleting unreferenced inode 7307835
>ext3_orphan_cleanup: deleting unreferenced inode 3616001
>ext3_orphan_cleanup: deleting unreferenced inode 3616688
>ext3_orphan_cleanup: deleting unreferenced inode 3615944
>ext3_orphan_cleanup: deleting unreferenced inode 3615934
>ext3_orphan_cleanup: deleting unreferenced inode 3615932
>ext3_orphan_cleanup: deleting unreferenced inode 3620783
>ext3_orphan_cleanup: deleting unreferenced inode 1687576
>ext3_orphan_cleanup: deleting unreferenced inode 3620758
>ext3_orphan_cleanup: deleting unreferenced inode 7307425
>ext3_orphan_cleanup: deleting unreferenced inode 3612719
>ext3_orphan_cleanup: deleting unreferenced inode 1687571
>ext3_orphan_cleanup: deleting unreferenced inode 1687757
>ext3_orphan_cleanup: deleting unreferenced inode 3612740
>ext3_orphan_cleanup: deleting unreferenced inode 3611589
>ext3_orphan_cleanup: deleting unreferenced inode 1687609
>ext3_orphan_cleanup: deleting unreferenced inode 3613864
>ext3_orphan_cleanup: deleting unreferenced inode 7307684
>ext3_orphan_cleanup: deleting unreferenced inode 1689254
>ext3_orphan_cleanup: deleting unreferenced inode 1687820
>ext3_orphan_cleanup: deleting unreferenced inode 1689250
>ext3_orphan_cleanup: deleting unreferenced inode 1687711
>ext3_orphan_cleanup: deleting unreferenced inode 1687859
>ext3_orphan_cleanup: deleting unreferenced inode 3615621
>ext3_orphan_cleanup: deleting unreferenced inode 1689246
>ext3_orphan_cleanup: deleting unreferenced inode 1687673
>ext3_orphan_cleanup: deleting unreferenced inode 1687685
>ext3_orphan_cleanup: deleting unreferenced inode 1687826
>ext3_orphan_cleanup: deleting unreferenced inode 3607797
>ext3_orphan_cleanup: deleting unreferenced inode 1690274
>ext3_orphan_cleanup: deleting unreferenced inode 1687655
>ext3_orphan_cleanup: deleting unreferenced inode 3613784
>ext3_orphan_cleanup: deleting unreferenced inode 3612857
>ext3_orphan_cleanup: deleting unreferenced inode 1689249
>ext3_orphan_cleanup: deleting unreferenced inode 1689248
>ext3_orphan_cleanup: deleting unreferenced inode 1687742
>ext3_orphan_cleanup: deleting unreferenced inode 1689255
>ext3_orphan_cleanup: deleting unreferenced inode 1687608
>ext3_orphan_cleanup: deleting unreferenced inode 1687572
>ext3_orphan_cleanup: deleting unreferenced inode 1687767
>EXT3-fs: sda8: 61 orphan inodes deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>usbcore: registered new driver usbserial
>drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
>usbcore: registered new driver usbserial_generic
>drivers/usb/serial/usb-serial.c: USB Serial Driver core
>ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 201
>drivers/usb/serial/usb-serial.c: USB Serial support registered for airprime
>airprime 3-1:1.0: airprime converter detected
>usb 3-1: airprime converter now attached to ttyUSB0
>usb 3-1: airprime converter now attached to ttyUSB1
>usb 3-1: airprime converter now attached to ttyUSB2
>usbcore: registered new driver airprime
>e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
>e1000e: Copyright (c) 1999-2007 Intel Corporation.
>e1000e 0000:02:00.0: Disabling L1 ASPM
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>ieee80211_crypt: registered algorithm 'NULL'
>0000:00:1c.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:15:58:2e:65:f0
>0000:00:1c.0: eth0: Intel(R) PRO/1000 Network Connection
>0000:00:1c.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003
>intel_rng: FWH not detected
>input: PC Speaker as /class/input/input4
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.1.0d
>ipw3945: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 74
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 74
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>ACPI: Sleep Button (CM) [SLPB]
>ibm_acpi: IBM ThinkPad ACPI Extras v0.13-rh
>ibm_acpi: http://ibm-acpi.sf.net/
>ibm_acpi: ThinkPad EC firmware 79HT48WW-1.05b
>input: Video Bus as /class/input/input5
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /class/input/input6
>ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda8, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2101640k swap on /dev/sda6.  Priority:-1 extents:1 across:2101640k
>ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>vmmon: module license 'unspecified' taints kernel.
>/dev/vmmon[2544]: VMCI: Driver initialized.
>/dev/vmmon[2544]: Module vmmon: registered with major=10 minor=165
>/dev/vmmon[2544]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=0 anyDisabled=1
>/dev/vmmon[2544]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=0 anyDisabled=1
>/dev/vmmon[2544]: Module vmmon: initialized
>/dev/vmnet: open called by PID 2598 (vmnet-bridge)
>/dev/vmnet: hub 0 does not exist, allocating memory.
>/dev/vmnet: port on hub 0 successfully opened
>bridge-eth1: peer interface eth1 not found, will wait for it to come up
>bridge-eth1: attached
>/dev/vmnet: open called by PID 2615 (vmnet-netifup)
>/dev/vmnet: hub 1 does not exist, allocating memory.
>/dev/vmnet: port on hub 1 successfully opened
>/dev/vmnet: open called by PID 2614 (vmnet-dhcpd)
>/dev/vmnet: port on hub 1 successfully opened
>/dev/vmnet: open called by PID 2647 (vmnet-netifup)
>/dev/vmnet: hub 8 does not exist, allocating memory.
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 2663 (vmnet-dhcpd)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 2702 (vmnet-natd)
>/dev/vmnet: port on hub 8 successfully opened
>Bluetooth: Core ver 2.10
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>Cisco Systems VPN Client Version 4.8.00 (0490) kernel module loaded
>vmnet1: no IPv6 routers present
>vmnet8: no IPv6 routers present
>ieee80211_crypt: registered algorithm 'WEP'
>bridge-eth1: enabling the bridge
>bridge-eth1: is a Wireless Adapter
>bridge-eth1: up
>eth1: no IPv6 routers present
>usb 2-1: USB disconnect, address 2
>Disabling non-boot CPUs ...
>Breaking affinity for irq 1
>Breaking affinity for irq 12
>Breaking affinity for irq 74
>Breaking affinity for irq 90
>Breaking affinity for irq 169
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU1 is down
>Stopping tasks: =====================================================================================================================================|
> usbdev5.2_ep83: PM: suspend 0->2, parent 5-2:1.0 already 1
> usbdev5.2_ep02: PM: suspend 0->2, parent 5-2:1.0 already 1
> usbdev5.2_ep81: PM: suspend 0->2, parent 5-2:1.0 already 1
>airprime 3-1:1.0: no suspend for driver airprime?
>ACPI: PCI interrupt for device 0000:15:00.0 disabled
>eth1: Going into suspend...
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>ACPI: PCI interrupt for device 0000:02:00.0 disabled
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.3 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 20002020, writing 2020)
>PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100100)
>PCI: Enabling device 0000:00:1b.0 (0100 -> 0102)
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 74
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 180107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20007060, writing 7060)
>PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040b)
>PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing e421e421)
>PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing ebf0ea00)
>PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 9080)
>PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010)
>PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb2: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 74
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb3: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 82
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb4: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 66
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>usb usb5: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 66
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>usb usb1: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005)
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 100103, writing 100107)
>e1000e 0000:02:00.0: Disabling L1 ASPM
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>eth1: Coming out of suspend...
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 74
>PM: Writing back config space on device 0000:15:00.0 at offset f (was 34001ff, writing 5c0010b)
>PM: Writing back config space on device 0000:15:00.0 at offset e (was 0, writing a4fc)
>PM: Writing back config space on device 0000:15:00.0 at offset d (was 0, writing a400)
>PM: Writing back config space on device 0000:15:00.0 at offset c (was 0, writing a0fc)
>PM: Writing back config space on device 0000:15:00.0 at offset b (was 0, writing a000)
>PM: Writing back config space on device 0000:15:00.0 at offset a (was 0, writing e7fff000)
>PM: Writing back config space on device 0000:15:00.0 at offset 9 (was 0, writing e6000000)
>PM: Writing back config space on device 0000:15:00.0 at offset 8 (was 0, writing e1fff000)
>PM: Writing back config space on device 0000:15:00.0 at offset 7 (was 0, writing e0000000)
>PM: Writing back config space on device 0000:15:00.0 at offset 6 (was 0, writing b0171615)
>PM: Writing back config space on device 0000:15:00.0 at offset 4 (was 0, writing e4300000)
>PM: Writing back config space on device 0000:15:00.0 at offset 3 (was 20000, writing 2a820)
>PM: Writing back config space on device 0000:15:00.0 at offset 1 (was 2100000, writing 2100007)
>ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>pnp: Device 00:08 does not support activation.
>pnp: Device 00:09 does not support activation.
>ata2: SATA link down (SStatus 0 SControl 0)
>ata3: SATA link down (SStatus 0 SControl 0)
>ata4: SATA link down (SStatus 0 SControl 0)
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: configured for UDMA/100
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> usbdev5.2_ep81: PM: resume from 0, parent 5-2:1.0 still 1
> usbdev5.2_ep02: PM: resume from 0, parent 5-2:1.0 still 1
> usbdev5.2_ep83: PM: resume from 0, parent 5-2:1.0 still 1
>Restarting tasks...<6>ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
> done
>Enabling non-boot CPUs ...
>usb 3-1: USB disconnect, address 2
>airprime ttyUSB0: airprime converter now disconnected from ttyUSB0
>airprime ttyUSB1: airprime converter now disconnected from ttyUSB1
>airprime ttyUSB2: airprime converter now disconnected from ttyUSB2
>airprime 3-1:1.0: device disconnected
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c074c000 soft=c072c000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.04 BogoMIPS (lpj=1995023)
>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00000940 0000c1a9 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz stepping 08
>CPU1 is up
>usb 5-2: USB disconnect, address 2
>usb 1-6: new high speed USB device using ehci_hcd and address 6
>usb 1-6: configuration #1 chosen from 1 choice
>hub 1-6:1.0: USB hub found
>hub 1-6:1.0: 4 ports detected
>usb 3-1: new full speed USB device using uhci_hcd and address 3
>usb 3-1: configuration #1 chosen from 1 choice
>airprime 3-1:1.0: airprime converter detected
>usb 3-1: airprime converter now attached to ttyUSB0
>usb 3-1: airprime converter now attached to ttyUSB1
>usb 3-1: airprime converter now attached to ttyUSB2
>usb 1-6.2: new low speed USB device using ehci_hcd and address 8
>usb 1-6.2: configuration #1 chosen from 1 choice
>input: ABBAHOME as /class/input/input7
>input: USB HID v1.10 Keyboard [ABBAHOME] on usb-0000:00:1d.7-6.2
>input: ABBAHOME as /class/input/input8
>input: USB HID v1.10 Mouse [ABBAHOME] on usb-0000:00:1d.7-6.2
>usb 5-2: new full speed USB device using uhci_hcd and address 3
>usb 5-2: configuration #1 chosen from 1 choice
>bridge-eth1: disabling the bridge
>bridge-eth1: down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>0000:00:1c.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX
>0000:00:1c.0: eth0: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>Disabling non-boot CPUs ...
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU1 is down
>Stopping tasks: ==================================================================================================================================|
> usbdev5.3_ep83: PM: suspend 0->2, parent 5-2:1.0 already 1
> usbdev5.3_ep02: PM: suspend 0->2, parent 5-2:1.0 already 1
> usbdev5.3_ep81: PM: suspend 0->2, parent 5-2:1.0 already 1
>airprime 3-1:1.0: no suspend for driver airprime?
>ACPI: PCI interrupt for device 0000:15:00.0 disabled
>eth1: Going into suspend...
>ipw3945: Error sending cmd #07 to daemon: time out after 500ms.
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>ACPI: PCI interrupt for device 0000:02:00.0 disabled
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.3 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100100)
>PCI: Enabling device 0000:00:1b.0 (0100 -> 0102)
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 74
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 180107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040b)
>PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing e421e421)
>PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing ebf0ea00)
>PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 20009080)
>PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010)
>PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb2: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 74
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb3: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 82
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb4: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 66
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>usb usb5: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 66
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>usb usb1: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005)
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 100103, writing 100107)
>e1000e 0000:02:00.0: Disabling L1 ASPM
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>eth1: Coming out of suspend...
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 74
>PM: Writing back config space on device 0000:15:00.0 at offset f (was 34001ff, writing 5c0010b)
>PM: Writing back config space on device 0000:15:00.0 at offset e (was 0, writing a4fc)
>PM: Writing back config space on device 0000:15:00.0 at offset d (was 0, writing a400)
>PM: Writing back config space on device 0000:15:00.0 at offset c (was 0, writing a0fc)
>PM: Writing back config space on device 0000:15:00.0 at offset b (was 0, writing a000)
>PM: Writing back config space on device 0000:15:00.0 at offset a (was 0, writing e7fff000)
>PM: Writing back config space on device 0000:15:00.0 at offset 9 (was 0, writing e6000000)
>PM: Writing back config space on device 0000:15:00.0 at offset 8 (was 0, writing e1fff000)
>PM: Writing back config space on device 0000:15:00.0 at offset 7 (was 0, writing e0000000)
>PM: Writing back config space on device 0000:15:00.0 at offset 6 (was 0, writing b0171615)
>PM: Writing back config space on device 0000:15:00.0 at offset 4 (was 0, writing e4300000)
>PM: Writing back config space on device 0000:15:00.0 at offset 3 (was 20000, writing 2a820)
>PM: Writing back config space on device 0000:15:00.0 at offset 1 (was 2100000, writing 2100007)
>ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>pnp: Device 00:08 does not support activation.
>pnp: Device 00:09 does not support activation.
>ata2: SATA link down (SStatus 0 SControl 0)
>ata3: SATA link down (SStatus 0 SControl 0)
>ata4: SATA link down (SStatus 0 SControl 0)
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: configured for UDMA/100
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>0000:00:1c.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX
>0000:00:1c.0: eth0: 10/100 speed: disabling TSO
> usbdev5.3_ep81: PM: resume from 0, parent 5-2:1.0 still 1
> usbdev5.3_ep02: PM: resume from 0, parent 5-2:1.0 still 1
> usbdev5.3_ep83: PM: resume from 0, parent 5-2:1.0 still 1
>Restarting tasks...<6>usb 3-1: USB disconnect, address 3
>airprime ttyUSB0: airprime converter now disconnected from ttyUSB0
>airprime ttyUSB1: airprime converter now disconnected from ttyUSB1
>airprime ttyUSB2: airprime converter now disconnected from ttyUSB2
>airprime 3-1:1.0: device disconnected
>ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
> done
>Enabling non-boot CPUs ...
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c074c000 soft=c072c000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.04 BogoMIPS (lpj=1995021)
>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00000940 0000c1a9 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz stepping 08
>usb 5-2: USB disconnect, address 3
>CPU1 is up
>usb 1-6: USB disconnect, address 6
>usb 1-6.2: USB disconnect, address 8
>usb 1-6: new high speed USB device using ehci_hcd and address 10
>usb 1-6: configuration #1 chosen from 1 choice
>hub 1-6:1.0: USB hub found
>hub 1-6:1.0: 4 ports detected
>usb 3-1: new full speed USB device using uhci_hcd and address 4
>usb 3-1: configuration #1 chosen from 1 choice
>airprime 3-1:1.0: airprime converter detected
>usb 3-1: airprime converter now attached to ttyUSB0
>usb 3-1: airprime converter now attached to ttyUSB1
>usb 3-1: airprime converter now attached to ttyUSB2
>usb 1-6.2: new low speed USB device using ehci_hcd and address 12
>usb 1-6.2: configuration #1 chosen from 1 choice
>input: ABBAHOME as /class/input/input9
>input: USB HID v1.10 Keyboard [ABBAHOME] on usb-0000:00:1d.7-6.2
>input: ABBAHOME as /class/input/input10
>input: USB HID v1.10 Mouse [ABBAHOME] on usb-0000:00:1d.7-6.2
>usb 5-2: new full speed USB device using uhci_hcd and address 4
>usb 5-2: configuration #1 chosen from 1 choice
>Uhhuh. NMI received for unknown reason b0 on CPU 0.
>You probably have a hardware problem with your RAM chips
>Dazed and confused, but trying to continue
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>bridge-eth1: enabling the bridge
>bridge-eth1: is a Wireless Adapter
>bridge-eth1: up
>bridge-eth1: disabling the bridge
>bridge-eth1: down
>bridge-eth1: enabling the bridge
>bridge-eth1: is a Wireless Adapter
>bridge-eth1: up
>bridge-eth1: disabling the bridge
>bridge-eth1: down
>bridge-eth1: enabling the bridge
>bridge-eth1: is a Wireless Adapter
>bridge-eth1: up
>Disabling non-boot CPUs ...
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU1 is down
>Stopping tasks: ===================================================================================================================================|
> usbdev5.4_ep83: PM: suspend 0->2, parent 5-2:1.0 already 1
> usbdev5.4_ep02: PM: suspend 0->2, parent 5-2:1.0 already 1
> usbdev5.4_ep81: PM: suspend 0->2, parent 5-2:1.0 already 1
>airprime 3-1:1.0: no suspend for driver airprime?
>ACPI: PCI interrupt for device 0000:15:00.0 disabled
>eth1: Going into suspend...
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>ACPI: PCI interrupt for device 0000:02:00.0 disabled
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.3 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100107, writing 40100507)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100100)
>PCI: Enabling device 0000:00:1b.0 (0100 -> 0102)
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 74
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 180107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040b)
>PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing e421e421)
>PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing ebf0ea00)
>PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 9080)
>PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010)
>PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb2: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 74
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb3: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 82
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb4: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 66
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>usb usb5: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 66
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>usb usb1: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005)
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 100103, writing 100107)
>e1000e 0000:02:00.0: Disabling L1 ASPM
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>eth1: Coming out of suspend...
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 74
>PM: Writing back config space on device 0000:15:00.0 at offset f (was 34001ff, writing 5c0010b)
>PM: Writing back config space on device 0000:15:00.0 at offset e (was 0, writing a4fc)
>PM: Writing back config space on device 0000:15:00.0 at offset d (was 0, writing a400)
>PM: Writing back config space on device 0000:15:00.0 at offset c (was 0, writing a0fc)
>PM: Writing back config space on device 0000:15:00.0 at offset b (was 0, writing a000)
>PM: Writing back config space on device 0000:15:00.0 at offset a (was 0, writing e7fff000)
>PM: Writing back config space on device 0000:15:00.0 at offset 9 (was 0, writing e6000000)
>PM: Writing back config space on device 0000:15:00.0 at offset 8 (was 0, writing e1fff000)
>PM: Writing back config space on device 0000:15:00.0 at offset 7 (was 0, writing e0000000)
>PM: Writing back config space on device 0000:15:00.0 at offset 6 (was 0, writing b0171615)
>PM: Writing back config space on device 0000:15:00.0 at offset 4 (was 0, writing e4300000)
>PM: Writing back config space on device 0000:15:00.0 at offset 3 (was 20000, writing 2a820)
>PM: Writing back config space on device 0000:15:00.0 at offset 1 (was 2100000, writing 2100007)
>ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>pnp: Device 00:08 does not support activation.
>pnp: Device 00:09 does not support activation.
>ata2: SATA link down (SStatus 0 SControl 0)
>ata3: SATA link down (SStatus 0 SControl 0)
>ata4: SATA link down (SStatus 0 SControl 0)
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: configured for UDMA/100
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> usbdev5.4_ep81: PM: resume from 0, parent 5-2:1.0 still 1
> usbdev5.4_ep02: PM: resume from 0, parent 5-2:1.0 still 1
> usbdev5.4_ep83: PM: resume from 0, parent 5-2:1.0 still 1
>Restarting tasks...<6>usb 3-1: USB disconnect, address 4
>airprime ttyUSB0: airprime converter now disconnected from ttyUSB0
>airprime ttyUSB1: airprime converter now disconnected from ttyUSB1
>airprime ttyUSB2: airprime converter now disconnected from ttyUSB2
>airprime 3-1:1.0: device disconnected
>ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
>usb 5-2: USB disconnect, address 4
> done
>Enabling non-boot CPUs ...
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c074c000 soft=c072c000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.06 BogoMIPS (lpj=1995034)
>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00000940 0000c1a9 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz stepping 08
>CPU1 is up
>usb 1-6: USB disconnect, address 10
>usb 1-6.2: USB disconnect, address 12
>Uhhuh. NMI received for unknown reason a0 on CPU 0.
>You probably have a hardware problem with your RAM chips
>Dazed and confused, but trying to continue
>usb 3-1: new full speed USB device using uhci_hcd and address 5
>usb 3-1: configuration #1 chosen from 1 choice
>airprime 3-1:1.0: airprime converter detected
>usb 3-1: airprime converter now attached to ttyUSB0
>usb 3-1: airprime converter now attached to ttyUSB1
>usb 3-1: airprime converter now attached to ttyUSB2
>usb 5-2: new full speed USB device using uhci_hcd and address 5
>usb 5-2: configuration #1 chosen from 1 choice
>usb 2-1: new low speed USB device using uhci_hcd and address 3
>usb 2-1: configuration #1 chosen from 1 choice
>input: Dell Dell USB Mouse as /class/input/input11
>input: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:1d.0-1
>bridge-eth1: disabling the bridge
>bridge-eth1: down
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>bridge-eth1: enabling the bridge
>bridge-eth1: is a Wireless Adapter
>bridge-eth1: up
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>bridge-eth1: disabling the bridge
>bridge-eth1: down
>bridge-eth1: enabling the bridge
>bridge-eth1: is a Wireless Adapter
>bridge-eth1: up
>eth1: no IPv6 routers present
>bridge-eth1: disabling the bridge
>bridge-eth1: down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>bridge-eth1: enabling the bridge
>bridge-eth1: is a Wireless Adapter
>bridge-eth1: up
>eth1: no IPv6 routers present
>hda_intel: azx_get_response timeout, switching to polling mode...
>ipw3945: ERROR: No TX rate available.
>ipw3945: tx cmd rate scale  failed.
>ipw3945: ERROR: No TX rate available.
>ipw3945: tx cmd rate scale  failed.
>ipw3945: ERROR: No TX rate available.
>ipw3945: tx cmd rate scale  failed.
>usb 2-1: USB disconnect, address 3
>Disabling non-boot CPUs ...
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU1 is down
>Stopping tasks: =================================================================================================================================|
> usbdev5.5_ep83: PM: suspend 0->2, parent 5-2:1.0 already 1
> usbdev5.5_ep02: PM: suspend 0->2, parent 5-2:1.0 already 1
> usbdev5.5_ep81: PM: suspend 0->2, parent 5-2:1.0 already 1
>airprime 3-1:1.0: no suspend for driver airprime?
>ACPI: PCI interrupt for device 0000:15:00.0 disabled
>eth1: Going into suspend...
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>ACPI: PCI interrupt for device 0000:02:00.0 disabled
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.3 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100107, writing 40100507)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100100)
>PCI: Enabling device 0000:00:1b.0 (0100 -> 0102)
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 74
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 180107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040b)
>PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing e421e421)
>PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing ebf0ea00)
>PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 20009080)
>PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010)
>PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb2: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 74
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb3: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 82
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb4: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 66
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>usb usb5: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 66
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>usb usb1: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005)
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 100103, writing 100107)
>e1000e 0000:02:00.0: Disabling L1 ASPM
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>eth1: Coming out of suspend...
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 74
>PM: Writing back config space on device 0000:15:00.0 at offset f (was 34001ff, writing 5c0010b)
>PM: Writing back config space on device 0000:15:00.0 at offset e (was 0, writing a4fc)
>PM: Writing back config space on device 0000:15:00.0 at offset d (was 0, writing a400)
>PM: Writing back config space on device 0000:15:00.0 at offset c (was 0, writing a0fc)
>PM: Writing back config space on device 0000:15:00.0 at offset b (was 0, writing a000)
>PM: Writing back config space on device 0000:15:00.0 at offset a (was 0, writing e7fff000)
>PM: Writing back config space on device 0000:15:00.0 at offset 9 (was 0, writing e6000000)
>PM: Writing back config space on device 0000:15:00.0 at offset 8 (was 0, writing e1fff000)
>PM: Writing back config space on device 0000:15:00.0 at offset 7 (was 0, writing e0000000)
>PM: Writing back config space on device 0000:15:00.0 at offset 6 (was 0, writing b0171615)
>PM: Writing back config space on device 0000:15:00.0 at offset 4 (was 0, writing e4300000)
>PM: Writing back config space on device 0000:15:00.0 at offset 3 (was 20000, writing 2a820)
>PM: Writing back config space on device 0000:15:00.0 at offset 1 (was 2100000, writing 2100007)
>ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>pnp: Device 00:08 does not support activation.
>pnp: Device 00:09 does not support activation.
>ata2: SATA link down (SStatus 0 SControl 0)
>ata3: SATA link down (SStatus 0 SControl 0)
>ata4: SATA link down (SStatus 0 SControl 0)
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: configured for UDMA/100
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> usbdev5.5_ep81: PM: resume from 0, parent 5-2:1.0 still 1
> usbdev5.5_ep02: PM: resume from 0, parent 5-2:1.0 still 1
> usbdev5.5_ep83: PM: resume from 0, parent 5-2:1.0 still 1
>Restarting tasks...<6>usb 3-1: USB disconnect, address 5
>airprime ttyUSB0: airprime converter now disconnected from ttyUSB0
>airprime ttyUSB1: airprime converter now disconnected from ttyUSB1
>airprime ttyUSB2: airprime converter now disconnected from ttyUSB2
>airprime 3-1:1.0: device disconnected
>ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
>usb 5-2: USB disconnect, address 5
> done
>Enabling non-boot CPUs ...
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c074c000 soft=c072c000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.09 BogoMIPS (lpj=1995047)
>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00000940 0000c1a9 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz stepping 08
>CPU1 is up
>usb 1-6: new high speed USB device using ehci_hcd and address 17
>usb 1-6: configuration #1 chosen from 1 choice
>hub 1-6:1.0: USB hub found
>hub 1-6:1.0: 4 ports detected
>usb 3-1: new full speed USB device using uhci_hcd and address 6
>usb 3-1: configuration #1 chosen from 1 choice
>airprime 3-1:1.0: airprime converter detected
>usb 3-1: airprime converter now attached to ttyUSB0
>usb 3-1: airprime converter now attached to ttyUSB1
>usb 3-1: airprime converter now attached to ttyUSB2
>usb 1-6.2: new low speed USB device using ehci_hcd and address 19
>usb 1-6.2: configuration #1 chosen from 1 choice
>input: ABBAHOME as /class/input/input12
>input: USB HID v1.10 Keyboard [ABBAHOME] on usb-0000:00:1d.7-6.2
>input: ABBAHOME as /class/input/input13
>input: USB HID v1.10 Mouse [ABBAHOME] on usb-0000:00:1d.7-6.2
>usb 5-2: new full speed USB device using uhci_hcd and address 6
>usb 5-2: configuration #1 chosen from 1 choice
>Uhhuh. NMI received for unknown reason b0 on CPU 0.
>You probably have a hardware problem with your RAM chips
>Dazed and confused, but trying to continue
>bridge-eth1: disabling the bridge
>bridge-eth1: down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>0000:00:1c.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX
>0000:00:1c.0: eth0: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 453445: 311497