Attachment 311800 Details for Bug 455359 – dmesg

dmesg

dmesg (text/plain), 23.44 KB, created by Martin Stransky on 2008-07-15 10:48:12 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Martin Stransky

Created: 2008-07-15 10:48:12 UTC

Size: 23.44 KB

patch

obsolete

>Linux version 2.6.18-53.el5 (brewbuilder@hs20-bc1-7.build.redhat.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Wed Oct 10 16:34:19 EDT 2007
>Command line: ro root=/dev/sda3 rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fe0ac00 (usable)
> BIOS-e820: 000000007fe0ac00 - 000000007fe0cc00 (ACPI NVS)
> BIOS-e820: 000000007fe0ec00 - 000000007fe5cc00 (reserved)
> BIOS-e820: 000000007fe5cc00 - 000000007fe5ec00 (ACPI data)
> BIOS-e820: 000000007fe5ec00 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fe000000 - 00000000ff000000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>DMI 2.3 present.
>ACPI: RSDP (v002 DELL                                  ) @ 0x00000000000febf0
>ACPI: XSDT (v001 DELL    B8K     0x0000000d ASL  0x00000061) @ 0x00000000000fce54
>ACPI: FADT (v003 DELL    B8K     0x0000000d ASL  0x00000061) @ 0x00000000000fcf7c
>ACPI: SSDT (v001   DELL    st_ex 0x00001000 INTL 0x20050624) @ 0x00000000fff620c0
>ACPI: MADT (v001 DELL    B8K     0x0000000d ASL  0x00000061) @ 0x00000000000fd070
>ACPI: BOOT (v001 DELL    B8K     0x0000000d ASL  0x00000061) @ 0x00000000000fd10e
>ACPI: ASF! (v016 DELL    B8K     0x0000000d ASL  0x00000061) @ 0x00000000000fd136
>ACPI: MCFG (v001 DELL    B8K     0x0000000d ASL  0x00000061) @ 0x00000000000fd19d
>ACPI: HPET (v001 DELL    B8K     0x0000000d ASL  0x00000061) @ 0x00000000000fd1db
>ACPI: TCPA (v001 DELL    B8K     0x0000000d ASL  0x00000061) @ 0x00000000000fd437
>  >>> ERROR: Invalid checksum
>ACPI: SLIC (v001 DELL    B8K     0x0000000d ASL  0x00000061) @ 0x00000000000fd213
>ACPI: DSDT (v001   DELL    dt_ex 0x00001000 INTL 0x20050624) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007fe0a000
>Bootmem setup node 0 0000000000000000-000000007fe0a000
>Memory for crash kernel (0x0 to 0x0) notwithin permissible range
>disabling kdump
>On node 0 totalpages: 515293
>  DMA zone: 2708 pages, LIFO batch:0
>  DMA32 zone: 512585 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
>IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009e000 - 00000000000f0000
>Nosave address range: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>SMP: Allowing 8 CPUs, 6 hotplug CPUs
>Built 1 zonelists.  Total pages: 515293
>Kernel command line: ro root=/dev/sda3 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>Memory: 2055092k/2095144k available (2434k kernel code, 39660k reserved, 1235k data, 192k init)
>Calibrating delay using timer specific routine.. 3195.50 BogoMIPS (lpj=1597754)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>result 16629987
>Detected 16.629 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3192.82 BogoMIPS (lpj=1596411)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Xeon(R) CPU            5110  @ 1.60GHz stepping 06
>Brought up 2 CPUs
>testing NMI watchdog ... OK.
>time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
>time.c: Detected 1596.479 MHz processor.
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=216 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=96 bytes
>sizeof(skbuff)=240 bytes
>migration_cost=32
>checking if image is initramfs... it is
>Freeing initrd memory: 2391k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:07:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2.PCI3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2.PCI3.PCIF._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2.PCI5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI7._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI9._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>PCI-GART: No AMD northbridge found.
>pnp: 00:01: ioport range 0x800-0x85f could not be reserved
>pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
>pnp: 00:01: ioport range 0x860-0x8ff has been reserved
>PCI: Bridge: 0000:02:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:02:01.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:01:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:01:00.3
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:02.0
>  IO window: disabled.
>  MEM window: dfc00000-dfcfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: disabled.
>  MEM window: dfb00000-dfbfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:04.0
>  IO window: d000-dfff
>  MEM window: dfd00000-dfefffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Bridge: 0000:00:05.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:07.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: dfa00000-dfafffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:02:01.0 to 64
>PCI: Setting latency timer of device 0000:01:00.3 to 64
>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x7a set to 0x1
>audit: initializing netlink socket (disabled)
>audit(1216125496.811:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 836E299A424CB51A
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>Allocate Port Service[0000:00:02.0:pcie01]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>Allocate Port Service[0000:00:03.0:pcie01]
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>Allocate Port Service[0000:00:04.0:pcie01]
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:05.0:pcie00]
>Allocate Port Service[0000:00:05.0:pcie01]
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:06.0:pcie00]
>Allocate Port Service[0000:00:06.0:pcie01]
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:07.0:pcie00]
>Allocate Port Service[0000:00:07.0:pcie01]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>Allocate Port Service[0000:01:00.0:pcie10]
>Allocate Port Service[0000:01:00.0:pcie11]
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:02:00.0:pcie20]
>Allocate Port Service[0000:02:00.0:pcie21]
>PCI: Setting latency timer of device 0000:02:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:02:01.0:pcie20]
>Allocate Port Service[0000:02:01.0:pcie21]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x3
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x4
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x5
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x6
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x7
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x8
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ESB2: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169
>ESB2: chipset revision 9
>ESB2: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>Probing IDE interface ide0...
>hda: TSSTcorpDVD-ROM TS-H352C, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 192k freed
>Write protecting the kernel read-only data: 468k
>input: AT Translated Set 2 keyboard as /class/input/input0
>USB Universal Host Controller Interface driver v3.0
>GSI 17 sharing vector 0x42 and IRQ 17
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 66
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 66, io base 0x0000ff80
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>GSI 18 sharing vector 0x4A and IRQ 18
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 74
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 74, io base 0x0000ff60
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>GSI 19 sharing vector 0x52 and IRQ 19
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 82
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 82, io base 0x0000ff40
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>GSI 20 sharing vector 0x5A and IRQ 20
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 90
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 90, io base 0x0000ff20
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-1: new low speed USB device using uhci_hcd and address 2
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 66
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 66, io mem 0xff980800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ahci 0000:00:1f.2: version 2.2
>GSI 21 sharing vector 0x62 and IRQ 21
>ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 98
>usb 1-1: device not accepting address 2, error -71
>usb 1-1: new low speed USB device using uhci_hcd and address 4
>usb 1-1: configuration #1 chosen from 1 choice
>input: Genius Optical Mouse as /class/input/input1
>input: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 cmd 0xffffc20000006100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 98
>ata2: SATA max UDMA/133 cmd 0xffffc20000006180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 98
>ata3: SATA max UDMA/133 cmd 0xffffc20000006200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 98
>ata4: SATA max UDMA/133 cmd 0xffffc20000006280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 98
>ata5: SATA max UDMA/133 cmd 0xffffc20000006300 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 98
>ata6: SATA max UDMA/133 cmd 0xffffc20000006380 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 98
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7: WDC WD2500JS-75NCB3, 10.02E04, max UDMA/133
>ata1.00: 488281250 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 4 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 0)
>  Vendor: ATA       Model: WDC WD2500JS-75N  Rev: 10.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: Attached scsi disk sda
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 6 roles, 1676 types, 213 bools, 1 sens, 1024 cats
>security:  61 classes, 60092 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1216125506.137:2): policy loaded auid=4294967295
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>hda: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>tg3.c:v3.80 (August 2, 2007)
>ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:0b:00.0 to 64
>eth0: Tigon3 [partno(BCM5752KFBG) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:19:b9:45:80:22
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>input: PC Speaker as /class/input/input2
>GSI 22 sharing vector 0x6A and IRQ 22
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 106
>Floppy drive(s): fd0 is 1.44M
>intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't or
> don't want to <4>intel_rng: disable this in firmware setup, and <4>intel_rng: if
> you are certain that your <4>intel_rng: system has a functional
> RNG, try<4>intel_rng: using the 'no_fwh_detect' option.
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>floppy0: no floppy controllers found
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [VBTN]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda3, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 4088532k swap on /dev/sda2.  Priority:-1 extents:1 across:4088532k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

Actions: View

Attachments on bug 455359: 311800 | 311801 | 311802 | 311803 | 311805