Attachment 311976 Details for Bug 428696 – Output of dmesg when USB key plugged in.

Output of dmesg when USB key plugged in.

qa-errors-kernel-PAE.txt (text/plain), 46.36 KB, created by Kelsey Hightower on 2008-07-16 18:14:25 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Kelsey Hightower

Created: 2008-07-16 18:14:25 UTC

Size: 46.36 KB

patch

obsolete

>Linux version 2.6.18-94.el5.gtest.49PAE (brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-41)) #1 SMP Thu Jul 3 16:37:00 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)
> BIOS-e820: 00000000dfff0000 - 00000000dfffe000 (ACPI data)
> BIOS-e820: 00000000dfffe000 - 00000000e0000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
>3712MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000ff780
>Memory for crash kernel (0x0 to 0x0) notwithin permissible range
>disabling kdump
>NX (Execute Disable) protection: active
>On node 0 totalpages: 1179648
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 950272 pages, LIFO batch:31
>DMI present.
>Using APIC driver default
>ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f9ee0
>ACPI: RSDT (v001 S M C  OEMRSDT  0x11000701 MSFT 0x00000097) @ 0xdfff0000
>ACPI: FADT (v002 S M C  OEMFACP  0x11000701 MSFT 0x00000097) @ 0xdfff0200
>ACPI: MADT (v001 S M C  OEMAPIC  0x11000701 MSFT 0x00000097) @ 0xdfff0390
>ACPI: MCFG (v001 S M C  OEMMCFG  0x11000701 MSFT 0x00000097) @ 0xdfff0430
>ACPI: OEMB (v001 S M C  SMC_OEM  0x11000701 MSFT 0x00000097) @ 0xdfffe040
>ACPI: SRAT (v001 AMD    HAMMER   0x00000001 AMD  0x00000001) @ 0xdfff5270
>ACPI: SSDT (v001 S M C  POWERNOW 0x00000001 AMD  0x00000001) @ 0xdfff5380
>ACPI: DSDT (v001  H8DM8 H8DM8000 0x00000000 INTL 0x20051117) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x2008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:1 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:1 APIC version 16
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>Processor #2 15:1 APIC version 16
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>Processor #3 15:1 APIC version 16
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
>Detected 2613.520 MHz processor.
>Built 1 zonelists.  Total pages: 1179648
>Kernel command line: ro root=/dev/SysVolGroup/LogVolRoot selinux=0
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c074a000 soft=c072a000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 4148008k/4718592k available (2092k kernel code, 44892k reserved, 873k data, 228k init, 3276736k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 5229.16 BogoMIPS (lpj=2614584)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
>CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0(2) -> Core 0
>CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: AMD Dual-Core AMD Opteron(tm) Processor 2218 HE stepping 03
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c074b000 soft=c072b000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5226.06 BogoMIPS (lpj=2613033)
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
>CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1(2) -> Core 1
>CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: AMD Dual-Core AMD Opteron(tm) Processor 2218 HE stepping 03
>SMP alternatives: switching to SMP code
>Booting processor 2/2 eip 3000
>CPU 2 irqstacks, hard=c074c000 soft=c072c000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 5226.07 BogoMIPS (lpj=2613037)
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
>CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 2(2) -> Core 0
>CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#2.
>CPU2: AMD Dual-Core AMD Opteron(tm) Processor 2218 HE stepping 03
>SMP alternatives: switching to SMP code
>Booting processor 3/3 eip 3000
>CPU 3 irqstacks, hard=c074d000 soft=c072d000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 5226.06 BogoMIPS (lpj=2613030)
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
>CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 3(2) -> Core 1
>CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#3.
>CPU3: AMD Dual-Core AMD Opteron(tm) Processor 2218 HE stepping 03
>Total of 4 processors activated (20907.36 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>checking TSC synchronization across 4 CPUs: 
>CPU#0 had 572 usecs TSC skew, fixed it up.
>CPU#1 had 572 usecs TSC skew, fixed it up.
>CPU#2 had -572 usecs TSC skew, fixed it up.
>CPU#3 had -572 usecs TSC skew, fixed it up.
>Brought up 4 CPUs
>sizeof(vma)=88 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=136 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=52 bytes
>sizeof(skbuff)=172 bytes
>migration_cost=421
>checking if image is initramfs... it is
>Freeing initrd memory: 3022k freed
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>Error attaching device data
>Error attaching device data
>Error attaching device data
>Error attaching device data
>Error attaching device data
>Error attaching device data
>Error attaching device data
>Error attaching device data
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:05.0
>PCI: Transparent bridge - 0000:00:06.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15.BR30._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15.BR31._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *11
>ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *14
>ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
>ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *14
>ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *5
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:09: ioport range 0x290-0x29f has been reserved
>PCI: Bridge: 0000:00:06.0
>  IO window: e000-efff
>  MEM window: fea00000-feafffff
>  PREFETCH window: f0000000-f7ffffff
>PCI: Bridge: 0000:02:00.0
>  IO window: disabled.
>  MEM window: feb00000-febfffff
>  PREFETCH window: fdf00000-fdffffff
>PCI: Bridge: 0000:02:00.1
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0a.0
>  IO window: disabled.
>  MEM window: feb00000-febfffff
>  PREFETCH window: fdf00000-fdffffff
>PCI: Bridge: 0000:00:0d.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0e.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0f.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>PCI: Setting latency timer of device 0000:02:00.1 to 64
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>PCI: Setting latency timer of device 0000:00:0f.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1216189042.130:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 6C37FE53D330168B
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Detected use of extended apic ids on hypertransport bus
>Detected use of extended apic ids on hypertransport bus
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0a.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0d.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0e.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0f.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0f.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x5
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x6
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x7
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x8
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 2 Dual-Core AMD Opteron(tm) Processor 2218 HE processors (4 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0x12 (2600 MHz), vid 0xe
>powernow-k8:    1 : fid 0x10 (2400 MHz), vid 0x10
>powernow-k8:    2 : fid 0xe (2200 MHz), vid 0x10
>powernow-k8:    3 : fid 0xc (2000 MHz), vid 0x10
>powernow-k8:    4 : fid 0xa (1800 MHz), vid 0x10
>powernow-k8:    5 : fid 0x2 (1000 MHz), vid 0x12
>powernow-k8:    0 : fid 0x12 (2600 MHz), vid 0xe
>powernow-k8:    1 : fid 0x10 (2400 MHz), vid 0x10
>powernow-k8:    2 : fid 0xe (2200 MHz), vid 0x10
>powernow-k8:    3 : fid 0xc (2000 MHz), vid 0x10
>powernow-k8:    4 : fid 0xa (1800 MHz), vid 0x10
>powernow-k8:    5 : fid 0x2 (1000 MHz), vid 0x12
>Using IPI No-Shortcut mode
>ACPI: (supports<6>Time: acpi_pm clocksource has been installed.
> S0 S1 S4 S5)
>Freeing unused kernel memory: 228k freed
>Write protecting the kernel read-only data: 392k
>input: AT Translated Set 2 keyboard as /class/input/input0
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.0: irq 217, io mem 0xfe9fb000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:02.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.1
>ehci_hcd 0000:00:02.1: irq 225, io mem 0xfe9fac00
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
>SCSI subsystem initialized
>megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
>megaraid: probe new device 0x1000:0x1960:0x1000:0x0520: bus 3:slot 6:func 0
>ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:03:06.0[A] -> Link [LNEA] -> GSI 19 (level, low) -> IRQ 233
>megaraid: fw version:[1L49] bios version:[G500]
>scsi0 : LSI Logic MegaRAID driver
>scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices
>scsi[0]: scanning scsi channel 1 [virtual] for logical drives
>  Vendor: MegaRAID  Model: LD 0 RAID1   70G  Rev: 1L49
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>SCSI device sda: 143372288 512-byte hdwr sectors (73407 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 00 00 00
>sda: asking for cache data failed
>sda: assuming drive cache: write through
>SCSI device sda: 143372288 512-byte hdwr sectors (73407 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 00 00 00
>sda: asking for cache data failed
>sda: assuming drive cache: write through
> sda: sda1 sda2 sda3
>sd 0:1:0:0: Attached scsi disk sda
>libata version 3.00 loaded.
>sata_nv 0000:00:05.0: version 3.5
>ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>scsi1 : sata_nv
>scsi2 : sata_nv
>ata1: SATA max UDMA/133 cmd 0xd480 ctl 0xd400 bmdma 0xcc00 irq 50
>ata2: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xcc08 irq 50
>ata1: SATA link down (SStatus 0 SControl 300)
>ata2: SATA link down (SStatus 0 SControl 300)
>ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LSA1] -> GSI 20 (level, low) -> IRQ 58
>PCI: Setting latency timer of device 0000:00:05.1 to 64
>scsi3 : sata_nv
>scsi4 : sata_nv
>ata3: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc080 irq 58
>ata4: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xc088 irq 58
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [LSA2] -> GSI 23 (level, low) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:05.2 to 64
>scsi5 : sata_nv
>scsi6 : sata_nv
>ata5: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 217
>ata6: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 217
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>input: PC Speaker as /class/input/input1
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>EDAC MC: Ver: 2.0.1 Jul  3 2008
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x2d00
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2e00
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>EDAC MC1: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:19.2
>sd 0:1:0:0: Attached scsi generic sg0 type 0
>lp: driver loaded but no devices found
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>Adding 2096472k swap on /dev/sda2.  Priority:-1 extents:1 across:2096472k
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack
>irq 225: nobody cared (try booting with the "irqpoll" option)
> [<c044c3c2>] __report_bad_irq+0x2b/0x69
> [<c044c5af>] note_interrupt+0x1af/0x1e8
> [<c0579e84>] usb_hcd_irq+0x23/0x50
> [<c044bbef>] handle_IRQ_event+0x23/0x49
> [<c044bcb0>] __do_IRQ+0x9b/0xd6
> [<c04073e4>] do_IRQ+0x93/0xae
> [<c040592e>] common_interrupt+0x1a/0x20
> [<c0403b98>] default_idle+0x0/0x59
> [<c0403bc9>] default_idle+0x31/0x59
> [<c0403c90>] cpu_idle+0x9f/0xb9
> =======================
>handlers:
>[<c0579e61>] (usb_hcd_irq+0x0/0x50)
>Disabling IRQ #225
>eth0: link up.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>eth0: no IPv6 routers present
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link up.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: link up.
>eth0: link down.
>eth0: link up.
>eth0: no IPv6 routers present
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link up.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: link up.
>eth0: link down.
>eth0: link up.
>eth0: no IPv6 routers present
>eth0: link up.
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link up.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: link up.
>eth0: link down.
>eth0: link up.
>eth0: no IPv6 routers present
>eth0: link up.
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link up.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: link up.
>eth0: link down.
>eth0: link up.
>eth0: no IPv6 routers present
>eth0: link up.
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link up.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: link up.
>eth0: no IPv6 routers present
>eth0: link down.
>eth0: link up.
>eth0: link down.
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link up.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: link up.
>eth0: no IPv6 routers present
>eth0: link down.
>eth0: link up.
>eth0: link down.
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link up.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: link up.
>eth0: link down.
>eth0: no IPv6 routers present
>eth0: link up.
>eth0: link down.
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link up.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: link up.
>eth0: link down.
>eth0: no IPv6 routers present
>eth0: link up.
>eth0: link down.
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link up.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: link up.
>eth0: link down.
>eth0: link up.
>eth0: no IPv6 routers present
>eth0: link down.
>eth0: link up.
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link up.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: link up.
>eth0: link down.
>eth0: link up.
>eth0: no IPv6 routers present
>eth0: link down.
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link up.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: link up.
>eth0: link down.
>eth0: link up.
>eth0: no IPv6 routers present
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link up.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: link up.
>eth0: no IPv6 routers present
>eth0: link down.
>eth0: link up.
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link up.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: link up.
>eth0: no IPv6 routers present
>eth0: link down.
>eth0: link up.
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link up.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: link up.
>eth0: no IPv6 routers present
>eth0: link down.
>eth0: link up.
>eth0: link up.
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link up.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: link up.
>eth0: no IPv6 routers present
>eth0: link down.
>eth0: link up.
>eth0: link up.
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link up.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: link up.
>eth0: no IPv6 routers present
>eth0: link down.
>eth0: link up.
>eth0: link up.
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link up.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: link up.
>eth0: no IPv6 routers present
>eth0: link down.
>eth0: link up.
>eth0: link up.
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link up.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: link up.
>eth0: link down.
>eth0: no IPv6 routers present
>eth0: link up.
>eth0: link up.
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link up.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: link up.
>eth0: link down.
>eth0: link up.
>eth0: no IPv6 routers present
>eth0: link up.
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link up.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: link up.
>eth0: no IPv6 routers present
>eth0: link down.
>eth0: link up.
>eth0: link up.
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link up.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: link up.
>eth0: no IPv6 routers present
>eth0: link down.
>eth0: link up.
>eth0: link up.
>usb 2-2: new high speed USB device using ehci_hcd and address 2
>ehci_hcd 0000:00:02.1: Unlink after no-IRQ?  Controller is probably using the wrong IRQ.
>usb 2-2: device not accepting address 2, error -110
>usb 2-2: new high speed USB device using ehci_hcd and address 3
>usb 2-2: device not accepting address 3, error -110
>usb 2-2: new high speed USB device using ehci_hcd and address 4
>usb 2-2: device not accepting address 4, error -110
>usb 2-2: new high speed USB device using ehci_hcd and address 5
>usb 2-2: device not accepting address 5, error -110
>eth0: link down.
>eth0: link up.
>eth0: link down.
>eth0: link up.
>eth0: link down.
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link up.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: link up.
>eth0: link down.
>eth0: link up.
>eth0: link up.
>eth0: link down.
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ACPI: PCI interrupt for device 0000:00:09.0 disabled
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0
>PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link up.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: link up.
>eth0: link down.
>eth0: link up.
>eth0: link up.
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0

Actions: View

Attachments on bug 428696: 291604 | 291745 | 291746 | 294922 | 296659 | 302347 | 311508 | 311976