Attachment 311984 Details for Bug 446284 – Dmesg, raid fail to boot after intall redhat 5.2, on motherboard with ICH9R

Dmesg, raid fail to boot after intall redhat 5.2, on motherboard with ICH9R

raid_fail.txt (text/plain), 20.38 KB, created by Hanh Le on 2008-07-16 19:11:40 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Hanh Le

Created: 2008-07-16 19:11:40 UTC

Size: 20.38 KB

patch

obsolete

>Linux version 2.6.18-53.el5 (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc versi
>on 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Wed Oct 10 16:34:02 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009a000 (usable)
> BIOS-e820: 000000000009a000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ffa0000 (usable)
> BIOS-e820: 000000001ffa0000 - 000000001ffae000 (ACPI data)
> BIOS-e820: 000000001ffae000 - 000000001ffe0000 (ACPI NVS)
> BIOS-e820: 000000001ffe0000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>found SMP MP-table at 000ff780
>Memory for crash kernel (0x0 to 0x0) notwithin permissible range
>disabling kdump
>Using x86 segment limits to approximate NX protection
>DMI present.
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x808
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
>Processor #6 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
>Processor #7 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 20000000:dee00000)
>Detected 2128.156 MHz processor.
>Built 1 zonelists.  Total pages: 130976
>Kernel command line: ro root=LABEL=/ rhgb console=ttyS0,115200
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0743000 soft=c0723000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 512260k/523904k available (2080k kernel code, 11052k reserved, 869k data
>, 220k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 4257.94 BogoMIPS (lpj=2128970)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: Intel(R) Xeon(R) CPU            5138  @ 2.13GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0744000 soft=c0724000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4255.41 BogoMIPS (lpj=2127706)
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Xeon(R) CPU            5138  @ 2.13GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 2/6 eip 3000
>CPU 2 irqstacks, hard=c0745000 soft=c0725000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 4255.45 BogoMIPS (lpj=2127725)
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#2.
>CPU2: Intel(R) Xeon(R) CPU            5138  @ 2.13GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 3/7 eip 3000
>CPU 3 irqstacks, hard=c0746000 soft=c0726000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 4255.45 BogoMIPS (lpj=2127726)
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#3.
>CPU3: Intel(R) Xeon(R) CPU            5138  @ 2.13GHz stepping 06
>Total of 4 processors activated (17024.25 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 4 CPUs: passed.
>Brought up 4 CPUs
>migration_cost=113,10567
>checking if image is initramfs... it is
>Freeing initrd memory: 2407k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>Error attaching device data
>Error attaching device data
>Error attaching device data
>Error attaching device data
>Error attaching device data
>Error attaching device data
>Error attaching device data
>Error attaching device data
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 *15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 18 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:0b: ioport range 0xa00-0xa7f has been reserved
>PCI: Bridge: 0000:00:02.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:05.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:07.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: e000-efff
>  MEM window: fdf00000-fdffffff
>  PREFETCH window: f0000000-f7ffffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1216220566.177:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key FF48355AC6B12D27
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P001Ist] [
>20060707]
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P002Ist] [
>20060707]
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P003Ist] [
>20060707]
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P004Ist] [
>20060707]
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not pres
>ent [20060707]
>ACPI: Getting cpuindex for acpiid 0x5
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not pres
>ent [20060707]
>ACPI: Getting cpuindex for acpiid 0x6
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not pres
>ent [20060707]
>ACPI: Getting cpuindex for acpiid 0x7
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not pres
>ent [20060707]
>ACPI: Getting cpuindex for acpiid 0x8
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
>PNP: PS/2 controller doesn't have KBD irq; using default 1
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports<6>Time: tsc clocksource has been installed.
> S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 220k freed
>Write protecting the kernel read-only data: 388k
>Red Hat nash version 5.1.19.6 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Setting up hotplug.
>logips2pp: Detected unknown logitech mouse model 11
>Creating block device nodes.
>Loading uhci-hcd.ko module
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 225
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 225, io base 0x0000b480
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 233
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 233, io base 0x0000b800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 50
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.2: irq 50, io base 0x0000b880
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 58
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.0: irq 58, io base 0x0000bc00
>usb usb4: configuration #1 chosen from 1 choice
>input: PS/2 Logitech Mouse as /class/input/input0
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 50
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.1: irq 50, io base 0x0000c000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 66
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.2: irq 66, io base 0x0000c080
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>Loading ohci-hcd.ko module
>Loading ehci-hcd.ko module
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 66
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: irq 66, io mem 0xfdefec00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>usb 5-1: new full speed USB device using uhci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 58
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: irq 58, io mem 0xfdeff800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 6 ports detected
>Loading jbd.ko module
>Loading ext3.ko module
>Loading scsi_mod.ko module
>SCSI subsystem initialized
>Loading sd_mod.ko module
>Loading libata.ko module
>Loading ahci.ko module
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 50
>usb 5-1: device not accepting address 2, error -71
>usb 8-3: new high speed USB device using ehci_hcd and address 2
>usb 8-3: configuration #1 chosen from 1 choice
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0xf impl RAID mode
>ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 cmd 0xe0824100 ctl 0x00000000 bmdma 0x00000000 irq 74
>ata2: SATA max UDMA/133 cmd 0xe0824180 ctl 0x00000000 bmdma 0x00000000 irq 74
>ata3: SATA max UDMA/133 cmd 0xe0824200 ctl 0x00000000 bmdma 0x00000000 irq 74
>ata4: SATA max UDMA/133 cmd 0xe0824280 ctl 0x00000000 bmdma 0x00000000 irq 74
>usb 5-2: new low speed USB device using uhci_hcd and address 4
>usb 5-2: configuration #1 chosen from 1 choice
>input: HID 1267:0103 as /class/input/input1
>input: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:1d.1-2
>input: HID 1267:0103 as /class/input/input2
>input: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:1d.1-2
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: FUJITSU MHT2040BS, 0000104A, max UDMA/100
>ata1.00: 78140160 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/100
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATA-7: FUJITSU MHT2040BH, 0000104A, max UDMA/100
>ata2.00: 78140160 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata2.00: configured for UDMA/100
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>  Vendor: ATA       Model: FUJITSU MHT2040B  Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
>sda: Write Protect is off
>SCSI device sda: drive cache: write back
>SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
>sda: Write Protect is off
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4 < >
> sda: p3 exceeds device capacity
> sda: p4 exceeds device capacity
>sd 0:0:0:0: Attached scsi disk sda
>  Vendor: ATA       Model: FUJITSU MHT2040B  Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sdb: 78140160 512-byte hdwr sectors (40008 MB)
>sdb: Write Protect is off
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 78140160 512-byte hdwr sectors (40008 MB)
>sdb: Write Protect is off
>SCSI device sdb: drive cache: write back
> sdb: unknown partition table
>sd 1:0:0:0: Attached scsi disk sdb
>Loading ata_piix.ko module
>ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 50
>scsi4 : ata_piix
>scsi5 : ata_piix
>ata5: SATA max UDMA/133 cmd 0x0001dc00 ctl 0x0001d882 bmdma 0x0001d400 irq 50
>ata6: SATA max UDMA/133 cmd 0x0001d800 ctl 0x0001d482 bmdma 0x0001d408 irq 50
>Loading usb-storage.ko module
>Initializing USB Mass Storage driver...
>scsi6 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>Waiting for driver initialization.
>  Vendor: LITE-ON   Model: COMBO SOHC-5232K  Rev: NK0G
>  Type:   CD-ROM                             ANSI SCSI revision: 00
>Loading dm-mod.ko module
>device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>
>Loading dm-mirror.ko module
>Loading dm-zero.ko module
>Loading dm-snapshot.ko module
>Waiting for driver initialization.
>Scanning and configuring dmraid supported devices
>No RAID sets and with names: "isw_cjhdafahac_Volume0"
>failed to stat() /dev/mapper/isw_cjhdafahac_Volume0
>Trying to resume from LABEL=SWAP-isw_cjhdaf
>attempt to access beyond end of device
>sda: rw=0, want=154175807, limit=78140160
>Buffer I/O error on device sda4, logical block 0
>attempt to access beyond end of device
>sda: rw=0, want=154175807, limit=78140160
>Buffer I/O error on device sda4, logical block 0
>attempt to access beyond end of device
>sda: rw=0, want=154175589, limit=78140160
>Buffer I/O error on device sda3, logical block 35840960
>attempt to access beyond end of device
>sda: rw=0, want=154175593, limit=78140160
>Buffer I/O error on device sda3, logical block 35840961
>attempt to access beyond end of device
>sda: rw=0, want=154175589, limit=78140160
>Buffer I/O error on device sda3, logical block 35840960
>attempt to access beyond end of device
>sda: rw=0, want=154175593, limit=78140160
>Buffer I/O error on device sda3, logical block 35840961
>Unable to access resume device (LABEL=SWAP-isw_cjhdaf)
>Creating root device.
>attempt to access beyond end of device
>sda: rw=0, want=154175807, limit=78140160
>Buffer I/O error on device sda4, logical block 0
>attempt to access beyond end of device
>sda: rw=0, want=154175807, limit=78140160
>Buffer I/O error on device sda4, logical block 0
>attempt to access beyond end of device
>sda: rw=0, want=154175589, limit=78140160
>Buffer I/O error on device sda3, logical block 35840960
>attempt to access beyond end of device
>sda: rw=0, want=154175593, limit=78140160
>Buffer I/O error on device sda3, logical block 35840961
>attempt to access beyond end of device
>sda: rw=0, want=154175589, limit=78140160
>attempt to access beyond end of device
>sda: rw=0, want=154175593, limit=78140160
>Mounting root filesystem.
>attempt to access beyond end of device
>sda: rw=0, want=154175807, limit=78140160
>attempt to access beyond end of device
>sda: rw=0, want=154175807, limit=78140160
>attempt to access beyond end of device
>sda: rw=0, want=154175589, limit=78140160
>attempt to access beyond end of device
>sda: rw=0, want=154175593, limit=78140160
>attempt to access beyond end of device
>sda: rw=0, want=154175589, limit=78140160
>attempt to access beyond end of device
>sda: rw=0, want=154175593, limit=78140160
>mount: could not find filesystemKernel panic - not syncing: Attempted to kill in
>it!
> '/dev/root'
>Se

Actions: View

Attachments on bug 446284: 306550 | 311984 | 324554