Attachment 312009 Details for Bug 455691 – full boot log

full boot log

full.log (text/plain), 14.75 KB, created by Qian Cai on 2008-07-17 05:56:44 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Qian Cai

Created: 2008-07-17 05:56:44 UTC

Size: 14.75 KB

patch

obsolete

>root (hd0,0)
> Filesystem type is ext2fs, partition type 0x83
>kernel /vmlinuz-2.6.18-92.1.6.el5debug ro root=/dev/VolGroup00/LogVol00 console
>=tty0 console=ttyS0,115200 nmi_watchdog=0 
>   [Linux-bzImage, setup=0x1e00, size=0x1eb6fc]
>initrd /initrd-2.6.18-92.1.6.el5debug.img
>   [Linux-initrd @ 0x37cdf000, 0x3100b0 bytes]
>
>Linux version 2.6.18-92.1.6.el5debug (brewbuilder@ls20-bc2-13.build.redhat.com) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-42)) #1 SMP Fri Jun 20 03:07:33 EDT 2008
>Command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS0,115200 nmi_watchdog=0 
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
> BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
> BIOS-e820: 000000003ff70000 - 000000003ff76000 (ACPI data)
> BIOS-e820: 000000003ff76000 - 000000003ff80000 (ACPI NVS)
> BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
>DMI present.
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003ff70000
>Bootmem setup node 0 0000000000000000-000000003ff70000
>Memory for crash kernel (0x0 to 0x0) notwithin permissible range
>disabling kdump
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24])
>IOAPIC[1]: apic_id 3, version 32, address 0xfec10000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009b000 - 000000000009c000
>Nosave address range: 000000000009c000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000e0000
>Nosave address range: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>Built 1 zonelists.  Total pages: 253422
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS0,115200 nmi_watchdog=0 
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      8192
>... CHAINHASH_SIZE:          4096
> memory used by lock dependency info: 1392 kB
> per task-struct memory footprint: 2160 bytes
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Checking aperture...
>Memory: 1007440k/1048000k available (2525k kernel code, 40156k reserved, 1623k data, 196k init)
>Calibrating delay using timer specific routine.. 2806.87 BogoMIPS (lpj=1403435)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>result 6251141
>Detected 6.251 MHz APIC timer.
>lockdep: not fixing up alternatives.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 2800.17 BogoMIPS (lpj=1400086)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU1: Thermal monitoring enabled (TM1)
>                   Genuine Intel(R) CPU 6.00GHz stepping 01
>CPU 1: Syncing TSC to CPU 0.
>CPU 1: synchronized TSC with CPU 0 (last diff -6 cycles, maxerr 777 cycles)
>Brought up 2 CPUs
>testing NMI watchdog ... <4>WARNING: CPU#0: NMI appears to be stuck (0->0)!
>Disabling vsyscall due to use of PM timer
>time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
>time.c: Detected 1400.266 MHz processor.
>migration_cost=45
>checking if image is initramfs... it is
>Freeing initrd memory: 3136k freed
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH4 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Link [LNKA] (IRQs *3 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 10 11 14 15) *5
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 11 14 15) *5
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 11 14 15) *7
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 7 of bridge 0000:00:1e.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>PCI: Bridge: 0000:00:03.0
>  IO window: 2000-2fff
>  MEM window: d0100000-d01fffff
>  PREFETCH window: 50000000-500fffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: d0200000-d02fffff
>  PREFETCH window: e0000000-efffffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 65536 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 32768 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 65536 bind 32768)
>TCP reno registered
>Simple Boot Flag at 0x38 set to 0x1
>audit: initializing netlink socket (disabled)
>audit(1220587736.232:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 5C9DD0FD4CC9C295
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: CPU1 (power states: C1[C1] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel i875 Chipset.
>agpgart: AGP aperture is 32M @ 0xd2000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>hda: CD-224E, ATAPI CD/DVD-ROM drive
>ide1: I/O resource 0x170-0x177 not free.
>ide1: ports already in use, skipping probe
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 196k freed
>Write protecting the kernel read-only data: 496k
>Red Hat nash version 5.1.19.6 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Setting up hotplug.
>Creating block device nodes.
>Loading ehci-hcd.ko module
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 169
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: irq 169, io mem 0xd0000400
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>Loading ohci-hcd.ko module
>Loading uhci-hcd.ko module
>USB Universal Host Controller Interface driver v3.0
>GSI 17 sharing vector 0xB1 and IRQ 17
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 177, io base 0x00001400
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>GSI 18 sharing vector 0xB9 and IRQ 18
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 185, io base 0x00001420
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>Loading jbd.ko module
>Loading ext3.ko module
>Loading scsi_mod.ko module
>SCSI subsystem initialized
>Loading sd_mod.ko module
>Loading libata.ko module
>Loading ata_piix.ko module
>ata_piix 0000:00:1f.2: MAP [ IDE IDE P0 P1 ]
>GSI 19 sharing vector 0xC1 and IRQ 19
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 193
>ata_piix 0000:00:1f.2: 0x1F0 IDE port busy
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: DUMMY
>ata2: SATA max UDMA/133 bmdma 0x1478 irq 15
>ata2.00: ATA-6: WDC WD400JD-75HKA1, 14.03G14, max UDMA/133
>ata2.00: 78125000 sectors, multi 16: LBA 
>ata2.00: configured for UDMA/133
>  Vendor: ATA       Model: WDC WD400JD-75HK  Rev: 14.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 78125000 512-byte hdwr sectors (40000 MB)
>sda: Write Protect is off
>SCSI device sda: drive cache: write back
>SCSI device sda: 78125000 512-byte hdwr sectors (40000 MB)
>sda: Write Protect is off
>SCSI device sda: drive cache: write back
> sda: sda1 sda2
>sd 1:0:0:0: Attached scsi disk sda
>Loading dm-mod.ko module
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
>Loading dm-mirror.ko module
>Loading dm-zero.ko module
>Loading dm-snapshot.ko module
>Waiting for driver initialization.
>Scanning and configuring dmraid supported devices
>Scanning logical volumes
>  Reading all physical volumes.  This may take a while...
>  Found volume group "VolGroup00" using metadata type lvm2
>Activating logical volumes
>  2 logical volume(s) in volume group "VolGroup00" now active
>Trying to resume from /dev/VolGroup00/LogVol01
>No suspend signature on swap, not resuming.
>Creating root device.
>Mounting root filesystem.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Setting up other filesystems.
>Setting up new root fs
>no fstab.sys, mounting internal defaults
>Switching to new root and running init.
>unmounting old /dev
>unmounting old /proc
>unmounting old /sys
>audit(1220587742.905:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>audit(1220587743.698:3): policy loaded auid=4294967295 ses=4294967295
>INIT: version 2.86 booting
>                Welcome to Red Hat Enterprise Linux Server
>                Press 'I' to enter interactive startup.
>Setting clock  (utc): Fri Sep  5 00:09:05 EDT 2008 [  OK  ]
>Starting udev: Unable to handle kernel paging request at ffffffff8405e2d9 RIP: 
> [<ffffffff8405e2d9>]
>PGD 203067 PUD 205063 PMD 0 
>Oops: 0010 [1] SMP 
>last sysfs file: /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/timeout
>CPU 1 
>Modules linked in: dm_snapshot dm_zero dm_mirror dm_mod ata_piix libata sd_mod scsi_mod ext3 jbd uhci_hcd ohci_hcd ehci_hcd
>Pid: 573, comm: udevd Tainted: G   M  2.6.18-92.1.6.el5debug #1
>RIP: 0010:[<ffffffff8405e2d9>]  [<ffffffff8405e2d9>]
>RSP: 0000:ffff810037c13ef8  EFLAGS: 00010286
>RAX: ffff81003f5f9130 RBX: 0000000000000003 RCX: 0000000000000000
>RDX: 000000000000000a RSI: ffff810001000038 RDI: ffff81003f5f9130
>RBP: ffff810002600d20 R08: 0000000000000002 R09: 0000000000000000
>R10: 0000000000000002 R11: 0000000000000158 R12: ffff81003f753440
>R13: 0000000000000003 R14: 0000000000000007 R15: ffff81003fd461c0
>FS:  00002b2979d6c710(0000) GS:ffff810037cdd300(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>CR2: ffffffff8405e2d9 CR3: 000000003d942000 CR4: 00000000000006e0
>Process udevd (pid: 573, threadinfo ffff81003e106000, task ffff81003fd461c0)
>Stack:  ffffffff800a0a96 ffff810037c00000 ffff810002600e20 0000000000000000
> 000000000000000a 0000000000000001 ffffffff800a0b4e ffffffff80425fd0
> ffffffff800971d2 ffffffff80425f90 0000000000000001 ffffffff80425fd0
>Call Trace:
> <IRQ>  [<ffffffff800a0a96>] __rcu_process_callbacks+0x140/0x1d5
> [<ffffffff800a0b4e>] rcu_process_callbacks+0x23/0x43
> [<ffffffff800971d2>] tasklet_action+0x6c/0xc3
> [<ffffffff80012a0e>] __do_softirq+0x67/0xf3
> [<ffffffff800613d0>] call_softirq+0x1c/0x28
> [<ffffffff8007066a>] do_softirq+0x35/0xa0
> [<ffffffff80060d3b>] apic_timer_interrupt+0x6b/0x70
> <EOI>  [<ffffffff800688ef>] _spin_unlock_irqrestore+0x40/0x44
> [<ffffffff8006a85e>] do_page_fault+0x503/0x835
> [<ffffffff80013274>] poison_obj+0x26/0x2f
> [<ffffffff80060e9d>] error_exit+0x0/0x96
>
>
>Code:  Bad RIP value.
>RIP  [<ffffffff8405e2d9>]
> RSP <ffff810037c13ef8>
>CR2: ffffffff8405e2d9
> <0>Kernel panic - not syncing: Fatal exception
>

Actions: View

Attachments on bug 455691: 312009