Attachment 312095 Details for Bug 428964 – dmesg in kernel 2.6.9-73 with EHCI failure

dmesg in kernel 2.6.9-73 with EHCI failure

dmsg-73.ng (text/plain), 15.56 KB, created by Shane Huang on 2008-07-18 03:16:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Shane Huang

Created: 2008-07-18 03:16:26 UTC

Size: 15.56 KB

patch

obsolete

>Bootdata ok (command line is ro root=LABEL=/12345)
>Linux version 2.6.9-73.EL (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-9)) #1 Tue Jun 10 17:16:08 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002fe90000 (usable)
> BIOS-e820: 000000002fe90000 - 000000002fe9e000 (ACPI data)
> BIOS-e820: 000000002fe9e000 - 000000002fee0000 (ACPI NVS)
> BIOS-e820: 000000002fee0000 - 000000002feee000 (reserved)
> BIOS-e820: 000000002fef0000 - 000000002ff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
>ACPI: RSDP (v000 ACPIAM                                ) @ 0x00000000000fa330
>ACPI: RSDT (v001 052008 RSDT2214 0x20080520 MSFT 0x00000097) @ 0x000000002fe90000
>ACPI: FADT (v001 052008 FACP2214 0x20080520 MSFT 0x00000097) @ 0x000000002fe90200
>ACPI: MADT (v001 052008 APIC2214 0x20080520 MSFT 0x00000097) @ 0x000000002fe90390
>ACPI: MCFG (v001 052008 OEMMCFG  0x20080520 MSFT 0x00000097) @ 0x000000002fe90400
>ACPI: OEMB (v001 052008 OEMB2214 0x20080520 MSFT 0x00000097) @ 0x000000002fe9e040
>ACPI: HPET (v001 052008 OEMHPET  0x20080520 MSFT 0x00000097) @ 0x000000002fe9a490
>ACPI: ASF! (v032 AMD    SB600ASF 0x00000001 INTL 0x20051117) @ 0x000000002fe9a4d0
>ACPI: SSDT (v001 A M I  POWERNOW 0x00000001 AMD  0x00000001) @ 0x000000002fe9a610
>ACPI: DSDT (v001  MS9A0 MS9A03-5 0x00000000 INTL 0x20051117) @ 0x0000000000000000
>On node 0 totalpages: 196143
>  DMA zone: 3999 pages, LIFO batch:1
>  Normal zone: 192144 pages, LIFO batch:16
>  HighMem zone: 0 pages, LIFO batch:1
>DMI present.
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:11 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:11 APIC version 16
>WARNING: NR_CPUS limit of 1 reached. Processor ignored.
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>Setting APIC routing to flat
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: HPET id: 0x8300 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 2ff00000:b0100000)
>Checking aperture...
>CPU 0: aperture @ f9c000000 size 32 MB
>Aperture from northbridge cpu 0 too small (32 MB)
>No AGP bridge found
>Built 1 zonelists
>Kernel command line: ro root=LABEL=/12345 console=tty0
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 14.317308 MHz HPET timer.
>time.c: Detected 2100.103 MHz processor.
>time.c: Using HPET/TSC based timekeeping.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Memory: 766028k/784960k available (2493k kernel code, 18288k reserved, 1379k data, 180k init)
>Calibrating delay using timer specific routine.. 4203.68 BogoMIPS (lpj=2101841)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01
>Using local APIC timer interrupts.
>Detected 12.500 MHz APIC timer.
>checking if image is initramfs... it is
>NET: Registered protocol family 16
>PCI: Using configuration type 1
>PCI: Using MMCONFIG at e0000000
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20040816
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>Error attaching device data
>Error attaching device data
>Error attaching device data
>Error attaching device data
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>xen_mem: Initialising balloon driver.
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 169
>GSI 17 sharing vector 0xB1 and IRQ 17
>ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 22 (level, low) -> IRQ 177
>GSI 18 sharing vector 0xB9 and IRQ 18
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 185
>ACPI: PCI Interrupt 0000:00:12.1[A] -> GSI 16 (level, low) -> IRQ 185
>GSI 19 sharing vector 0xC1 and IRQ 19
>ACPI: PCI Interrupt 0000:00:12.2[B] -> GSI 17 (level, low) -> IRQ 193
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 169
>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 18 (level, low) -> IRQ 169
>GSI 20 sharing vector 0xC9 and IRQ 20
>ACPI: PCI Interrupt 0000:00:13.2[B] -> GSI 19 (level, low) -> IRQ 201
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 185
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 185
>ACPI: PCI Interrupt 0000:00:14.5[C] -> GSI 18 (level, low) -> IRQ 169
>ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 18 (level, low) -> IRQ 169
>ACPI: PCI Interrupt 0000:01:05.1[B] -> GSI 19 (level, low) -> IRQ 201
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 169
>PCI-DMA: Disabling IOMMU.
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1216348094.290:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key E9FA2F2DF4F62938
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [P001] (supports C1, 8 throttling states)
>Real Time Clock Driver v1.12
>Linux agpgart interface v0.100 (c) Dave Jones
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ATIIXP: IDE controller at PCI slot 0000:00:14.1
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 185
>ATIIXP: chipset revision 0
>ATIIXP: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>Probing IDE interface ide2...
>Probing IDE interface ide3...
>Probing IDE interface ide4...
>Probing IDE interface ide5...
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI wakeup devices: 
>PCE2 PCE3 PCE4 PCE5 PCE6 PCE7 PCE9 PCEA SBAZ PSKE PSMS P0PC UHC7 UHC1 UHC2 UHC3 USB4 UHC5 UHC6 PWRB 
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 180k freed
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ahci 0000:00:11.0: version 2.0
>ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 22 (level, low) -> IRQ 177
>MSI INIT SUCCESS
>ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:11.0: flags: 64bit ncq ilck pm led clo pmp pio slum part 
>ata1: SATA max UDMA/133 cmd 0xFFFFFF000003A900 ctl 0x0 bmdma 0x0 irq 177
>ata2: SATA max UDMA/133 cmd 0xFFFFFF000003A980 ctl 0x0 bmdma 0x0 irq 177
>ata3: SATA max UDMA/133 cmd 0xFFFFFF000003AA00 ctl 0x0 bmdma 0x0 irq 177
>ata4: SATA max UDMA/133 cmd 0xFFFFFF000003AA80 ctl 0x0 bmdma 0x0 irq 177
>scsi0 : ahci
>ata1: SATA link down (SStatus 0 SControl 300)
>scsi1 : ahci
>ata2: SATA link down (SStatus 0 SControl 300)
>scsi2 : ahci
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATAPI, max UDMA/66
>ata3.00: configured for UDMA/66
>scsi3 : ahci
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: ATA-7, max UDMA/133, 156299375 sectors: LBA48 NCQ (depth 31/32)
>ata4.00: configured for UDMA/133
>Using cfq io scheduler
>  Vendor: PIONEER   Model: DVD-RW  DVR-215   Rev: 1.13
>  Type:   CD-ROM                             ANSI SCSI revision: 05
>  Vendor: ATA       Model: ST3802110AS       Rev: 3.AA
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 156299375 512-byte hdwr sectors (80025 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 156299375 512-byte hdwr sectors (80025 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 > sda3 sda4
>Attached scsi disk sda at scsi3, channel 0, id 0, lun 0
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>Attached scsi CD-ROM sr0 at scsi2, channel 0, id 0, lun 0
>inserting floppy driver for 2.6.9-73.EL
>floppy0: no floppy controllers found
>tg3.c:v3.86 (November 9, 2007)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>divert: allocating divert_blk for eth0
>eth0: Tigon3 [partno(BCM95755) rev a002 PHY(5755)] (PCI Express) 10/100/1000Base-T Ethernet 00:0c:87:00:56:87
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 185
>hda-intel: no codecs found!
>ACPI: PCI Interrupt 0000:01:05.1[B] -> GSI 19 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:01:05.1 to 64
>MC: drivers/edac/edac_mc.c version MC $Revision: 1.3 $
>MC0: Giving out device to k8_edac Athlon64/Opteron: PCI 0000:00:18.2 (0000:00:18.2)
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 185
>ohci_hcd 0000:00:12.0: OHCI Host Controller
>ohci_hcd 0000:00:12.0: irq 185, pci mem ffffff0000064000
>ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:12.1[A] -> GSI 16 (level, low) -> IRQ 185
>ohci_hcd 0000:00:12.1: OHCI Host Controller
>ohci_hcd 0000:00:12.1: irq 185, pci mem ffffff0000066000
>ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 169
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: irq 169, pci mem ffffff0000068000
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 3
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 18 (level, low) -> IRQ 169
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: irq 169, pci mem ffffff000006a000
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 4
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:14.5[C] -> GSI 18 (level, low) -> IRQ 169
>ohci_hcd 0000:00:14.5: OHCI Host Controller
>ohci_hcd 0000:00:14.5: irq 169, pci mem ffffff000006c000
>ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:12.2[B] -> GSI 17 (level, low) -> IRQ 193
>ehci_hcd 0000:00:12.2: EHCI Host Controller
>ehci_hcd 0000:00:12.2: irq 193, pci mem ffffff000006e000
>ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:12.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 6 ports detected
>ACPI: PCI Interrupt 0000:00:13.2[B] -> GSI 19 (level, low) -> IRQ 201
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: request interrupt 201 failed
>ehci_hcd 0000:00:13.2: init 0000:00:13.2 fail, -16
>ehci_hcd: probe of 0000:00:13.2 failed with error -16
>usb 3-1: new full speed USB device using address 2
>usb 3-1: not running at top speed; connect to a high speed hub
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>  Vendor: FUJITSU   Model: MHV2060AH         Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>SCSI device sdb: 117210240 512-byte hdwr sectors (60012 MB)
>sdb: assuming drive cache: write through
>SCSI device sdb: 117210240 512-byte hdwr sectors (60012 MB)
>sdb: assuming drive cache: write through
> sdb:<6>usb 4-2: new low speed USB device using address 2
>ACPI: Power Button (FF) [PWRF]
> sdb1 sdb2 sdb3
>Attached scsi disk sdb at scsi4, channel 0, id 0, lun 0
>USB Mass Storage device found at 2
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:13.1-2
>usb 4-3: new low speed USB device using address 3
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.1-3
>EXT3 FS on sda3, internal journal
>device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
>Adding 843372k swap on /dev/sda7.  Priority:-1 extents:1
>Linux Kernel Card Services
>  options:  [pci] [cardbus] [pm]
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>i2c /dev entries driver
>lp: driver loaded but no devices found
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device ffffffff80473b00(lo)
>IPv6 over IPv4 tunneling driver
>divert: not allocating divert_blk for non-ethernet device sit0

Actions: View

Attachments on bug 428964: 308764 | 308765 | 312095 | 312096 | 312097 | 312106 | 312108