Attachment 312600 Details for Bug 456608 – dmesg output showing 2 BUGs

dmesg output showing 2 BUGs

dmesg.txt (text/plain), 57.90 KB, created by Tom London on 2008-07-24 21:58:17 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tom London

Created: 2008-07-24 21:58:17 UTC

Size: 57.90 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27-0.173.rc0.git11.fc10.i686 (mockbuild@x86-8) (gcc version 4.3.1 20080708 (Red Hat 4.3.1-4) (GCC) ) #1 SMP Thu Jul 24 07:15:26 EDT 2008
>PAT disabled. Not yet verified on this CPU type.
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
> BIOS-e820: 000000007f6d0000 - 000000007f6df000 (ACPI data)
> BIOS-e820: 000000007f6df000 - 000000007f700000 (ACPI NVS)
> BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
>last_pfn = 0x7f6d0 max_arch_pfn = 0x100000
>kernel direct mapping tables up to 38000000 @ 7000-c000
>Using x86 segment limits to approximate NX protection
>RAMDISK: 7f2c8000 - 7f6bfa09
>Allocated new RAMDISK: 00c42000 - 01039a09
>Move RAMDISK from 000000007f2c8000 - 000000007f6bfa08 to 00c42000 - 01039a08
>DMI present.
>ACPI: RSDP 000F67C0, 0024 (r2 LENOVO)
>ACPI: XSDT 7F6D191C, 0084 (r1 LENOVO TP-7B        2170  LTP        0)
>ACPI: FACP 7F6D1A00, 00F4 (r3 LENOVO TP-7B        2170 LNVO        1)
>ACPI Warning (tbfadt-0447): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080609]
>ACPI: DSDT 7F6D1D90, CFB9 (r1 LENOVO TP-7B        2170 MSFT  100000E)
>ACPI: FACS 7F6F4000, 0040
>ACPI: SSDT 7F6D1BB4, 01DC (r1 LENOVO TP-7B        2170 MSFT  100000E)
>ACPI: ECDT 7F6DED49, 0052 (r1 LENOVO TP-7B        2170 LNVO        1)
>ACPI: TCPA 7F6DED9B, 0032 (r2 LENOVO TP-7B        2170 LNVO        1)
>ACPI: APIC 7F6DEDCD, 0068 (r1 LENOVO TP-7B        2170 LNVO        1)
>ACPI: MCFG 7F6DEE35, 003C (r1 LENOVO TP-7B        2170 LNVO        1)
>ACPI: HPET 7F6DEE71, 0038 (r1 LENOVO TP-7B        2170 LNVO        1)
>ACPI: BOOT 7F6DEFD8, 0028 (r1 LENOVO TP-7B        2170  LTP        1)
>ACPI: SSDT 7F6F2645, 025F (r1 LENOVO TP-7B        2170 INTL 20050513)
>ACPI: SSDT 7F6F28A4, 00A6 (r1 LENOVO TP-7B        2170 INTL 20050513)
>ACPI: SSDT 7F6F294A, 04F7 (r1 LENOVO TP-7B        2170 INTL 20050513)
>ACPI: SSDT 7F6F2E41, 01D8 (r1 LENOVO TP-7B        2170 INTL 20050513)
>Entering add_active_range(0, 0x0, 0x9f) 0 entries of 256 used
>Entering add_active_range(0, 0x100, 0x7f6d0) 1 entries of 256 used
>1142MB HIGHMEM available.
>896MB LOWMEM available.
>  mapped low ram: 0 - 38000000
>  low ram: 00000000 - 38000000
>  bootmap 00008000 - 0000f000
>(9 early reservations) ==> bootmem [0000000000 - 0038000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000400000 - 0000c2c494]    TEXT DATA BSS ==> [0000400000 - 0000c2c494]
>  #4 [0000c2d000 - 0000c42000]    INIT_PG_TABLE ==> [0000c2d000 - 0000c42000]
>  #5 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
>  #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
>  #7 [0000c42000 - 0001039a09]      NEW RAMDISK ==> [0000c42000 - 0001039a09]
>  #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>found SMP MP-table at [c00f67f0] 000f67f0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x00038000
>  HighMem  0x00038000 -> 0x0007f6d0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0007f6d0
>On node 0 totalpages: 521839
>free_area_init_node: node 0, pgdat c07a4200, node_mem_map c103b000
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3943 pages, LIFO batch:0
>  Normal zone: 3080 pages used for memmap
>  Normal zone: 222200 pages, LIFO batch:31
>  HighMem zone: 4000 pages used for memmap
>  HighMem zone: 288560 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
>PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
>PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>PERCPU: Allocating 336436 bytes of per cpu data
>NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 514703
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 vga=795
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0897000 soft=c0877000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Extended CMOS year: 2000
>TSC calibrated against PM_TIMER
>Detected 1828.749 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1088 kB
> per task-struct memory footprint: 2688 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2043896k/2087744k available (2569k kernel code, 42696k reserved, 1358k data, 616k init, 1170240k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc57000 - 0xfffff000   (3744 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc07da000 - 0xc0874000   ( 616 kB)
>      .data : 0xc0682458 - 0xc07d5cf8   (1358 kB)
>      .text : 0xc0400000 - 0xc0682458   (2569 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 32 of 32 pages preallocated
>SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay loop (skipped), value calculated using timer frequency.. <6>3657.49 BogoMIPS (lpj=1828749)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using mwait in idle threads.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20080609
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
>lockdep: fixing up alternatives.
>CPU 1 irqstacks, hard=c0898000 soft=c0878000
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. <6>3657.36 BogoMIPS (lpj=1828682)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
>checking TSC synchronization [CPU#0 -> CPU#1]:
>Measured 579832 cycles TSC warp between CPUs, turning off TSC clock.
>Marking TSC unstable due to check_tsc_sync_source failed
>Brought up 2 CPUs
>Total of 2 processors activated (7314.86 BogoMIPS).
>sizeof(vma)=84 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=608 bytes
>sizeof(dentry)=160 bytes
>sizeof(ext3inode)=860 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=184 bytes
>sizeof(task_struct)=6064 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>khelper used greatest stack depth: 3016 bytes left
>khelper used greatest stack depth: 2592 bytes left
>net_namespace: 896 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 14:33:56  Date: 07/24/08
>NET: Registered protocol family 16
>ACPI: ACPI Dock Station Driver
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
>PCI: MCFG area at f0000000 reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:15:00.0: supports D1
>pci 0000:15:00.0: supports D2
>pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:15:00.0: PME# disabled
>pci 0000:15:00.1: PME# supported from D0 D3hot D3cold
>pci 0000:15:00.1: PME# disabled
>pci 0000:15:00.2: supports D1
>pci 0000:15:00.2: supports D2
>pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:15:00.2: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>bus 00 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: Power Resource [PUBS] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>tracer: 772 pages allocated for 65536 entries of 48 bytes
>   actual entries 65620
>ACPI: RTC can wake from S4
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
>system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
>system 00:00: iomem range 0xc8000-0xcbfff has been reserved
>system 00:00: iomem range 0xcc000-0xcffff could not be reserved
>system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
>system 00:00: iomem range 0xdc000-0xdffff could not be reserved
>system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
>system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
>system 00:00: iomem range 0xe8000-0xebfff could not be reserved
>system 00:00: iomem range 0xec000-0xeffff could not be reserved
>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x7fffffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
>system 00:00: iomem range 0xfed41000-0xffffffff could not be reserved
>system 00:02: ioport range 0x164e-0x164f has been reserved
>system 00:02: ioport range 0x1000-0x107f has been reserved
>system 00:02: ioport range 0x1180-0x11bf has been reserved
>system 00:02: ioport range 0x800-0x80f has been reserved
>system 00:02: ioport range 0x15e0-0x15ef has been reserved
>system 00:02: ioport range 0x1600-0x165f could not be reserved
>system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
>system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
>system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
>system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
>pci 0000:00:1c.0:   MEM window: 0xee000000-0xee0fffff
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
>pci 0000:00:1c.1:   IO window: 0x3000-0x4fff
>pci 0000:00:1c.1:   MEM window: 0xec000000-0xedffffff
>pci 0000:00:1c.1:   PREFETCH window: 0x000000e4000000-0x000000e40fffff
>pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
>pci 0000:00:1c.2:   IO window: 0x5000-0x6fff
>pci 0000:00:1c.2:   MEM window: 0xe8000000-0xe9ffffff
>pci 0000:00:1c.2:   PREFETCH window: 0x000000e4100000-0x000000e41fffff
>pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c
>pci 0000:00:1c.3:   IO window: 0x7000-0x8fff
>pci 0000:00:1c.3:   MEM window: 0xea000000-0xebffffff
>pci 0000:00:1c.3:   PREFETCH window: 0x000000e4200000-0x000000e42fffff
>pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
>pci 0000:15:00.0:   IO window: 0x009000-0x0090ff
>pci 0000:15:00.0:   IO window: 0x009400-0x0094ff
>pci 0000:15:00.0:   PREFETCH window: 0xe0000000-0xe3ffffff
>pci 0000:15:00.0:   MEM window: 0x88000000-0x8bffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
>pci 0000:00:1e.0:   IO window: 0x9000-0xcfff
>pci 0000:00:1e.0:   MEM window: 0xe4300000-0xe7ffffff
>pci 0000:00:1e.0:   PREFETCH window: 0x000000e0000000-0x000000e3ffffff
>pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>pci 0000:00:1e.0: enabling device (0005 -> 0007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:15:00.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>debug: unmapping init memory c0c42000..c103a000
>Simple Boot Flag at 0x35 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1216910036.224:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1707
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000
>pci 0000:00:1d.0: Performing full reset
>pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
>pci 0000:00:1d.1: Performing full reset
>pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
>pci 0000:00:1d.2: Performing full reset
>pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000
>pci 0000:00:1d.3: Performing full reset
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>pcieport-driver 0000:00:1c.0: found MSI capability
>pci_express 0000:00:1c.0:pcie00: allocate port service
>pci_express 0000:00:1c.0:pcie02: allocate port service
>pci_express 0000:00:1c.0:pcie03: allocate port service
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>pcieport-driver 0000:00:1c.1: found MSI capability
>pci_express 0000:00:1c.1:pcie00: allocate port service
>pci_express 0000:00:1c.1:pcie02: allocate port service
>pci_express 0000:00:1c.1:pcie03: allocate port service
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>pcieport-driver 0000:00:1c.2: found MSI capability
>pci_express 0000:00:1c.2:pcie00: allocate port service
>pci_express 0000:00:1c.2:pcie02: allocate port service
>pci_express 0000:00:1c.2:pcie03: allocate port service
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>pcieport-driver 0000:00:1c.3: found MSI capability
>pci_express 0000:00:1c.3:pcie00: allocate port service
>pci_express 0000:00:1c.3:pcie02: allocate port service
>pci_express 0000:00:1c.3:pcie03: allocate port service
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 7872k, total 7872k
>vesafb: mode is 1280x1024x32, linelength=5120, pages=0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>fbcon: VESA VGA (fb0) is primary device
>Console: switching to colour frame buffer device 160x64
>fb0: VESA VGA frame buffer device
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: SSDT 7F6F1D26, 0240 (r1  PmRef  Cpu0Ist      100 INTL 20050513)
>ACPI: SSDT 7F6F1FEB, 065A (r1  PmRef  Cpu0Cst      100 INTL 20050513)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI0007:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7F6F1C5E, 00C8 (r1  PmRef  Cpu1Ist      100 INTL 20050513)
>ACPI: SSDT 7F6F1F66, 0085 (r1  PmRef  Cpu1Cst      100 INTL 20050513)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI0007:01: registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM0] (63 C)
>thermal LNXTHERM:02: registered as thermal_zone1
>ACPI: Thermal Zone [THM1] (62 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>serial 00:0a: activated
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input3
>Driver 'sd' needs updating - please use bus_type methods
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 0:324:587
>debug: unmapping init memory c07da000..c0874000
>Write protecting the kernel read-only data: 1116k
>plymouthd used greatest stack depth: 2516 bytes left
>ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
>ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>drivers/usb/core/inode.c: creating file 'devices'
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
>ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
>ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: supports USB remote wakeup
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000
>ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: default language 0x0409
>usb usb1: uevent
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>usb 1-0:1.0: uevent
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
>ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 6: status 0501 change 0001
>ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 7: status 0501 change 0001
>ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 8: status 0501 change 0001
>hub 1-0:1.0: state 7 ports 8 chg 01c0 evt 0000
>drivers/usb/core/inode.c: creating file '001'
>hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27-0.173.rc0.git11.fc10.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: port 6 high speed
>ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
>modprobe used greatest stack depth: 1436 bytes left
>usb 1-6: new high speed USB device using ehci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd: block sizes: ed 64 td 64
>USB Universal Host Controller Interface driver v3.0
>uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>ehci_hcd 0000:00:1d.7: port 6 high speed
>ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
>drivers/usb/core/inode.c: creating file '002'
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: detected 2 ports
>uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.0: Performing full reset
>uhci_hcd 0000:00:1d.0: supports USB remote wakeup
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
>usb usb2: default language 0x0409
>usb usb2: uevent
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>usb 2-0:1.0: uevent
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: individual port over-current protection
>hub 2-0:1.0: power on to power good time: 2ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>usb 1-6: uevent
>usb 1-6: usb_probe_device
>usb 1-6: configuration #1 chosen from 1 choice
>usb 1-6: adding 1-6:1.0 (config #1, interface 0)
>usb 1-6:1.0: uevent
>hub 1-6:1.0: usb_probe_interface
>hub 1-6:1.0: usb_probe_interface - got id
>hub 1-6:1.0: USB hub found
>hub 1-6:1.0: 4 ports detected
>hub 1-6:1.0: standalone hub
>hub 1-6:1.0: individual port power switching
>hub 1-6:1.0: individual port over-current protection
>hub 1-6:1.0: TT per port
>hub 1-6:1.0: TT requires at most 8 FS bit times (666 ns)
>hub 1-6:1.0: power on to power good time: 100ms
>hub 1-6:1.0: local power source is good
>hub 1-6:1.0: enabling power on all ports
>drivers/usb/core/inode.c: creating file '001'
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27-0.173.rc0.git11.fc10.i686 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>hub 1-6:1.0: port 2: status 0301 change 0001
>drivers/usb/core/inode.c: creating file '003'
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: detected 2 ports
>uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.1: Performing full reset
>uhci_hcd 0000:00:1d.1: supports USB remote wakeup
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
>usb usb3: default language 0x0409
>usb usb3: uevent
>usb usb3: usb_probe_device
>usb usb3: configuration #1 chosen from 1 choice
>usb usb3: adding 3-0:1.0 (config #1, interface 0)
>usb 3-0:1.0: uevent
>hub 3-0:1.0: usb_probe_interface
>hub 3-0:1.0: usb_probe_interface - got id
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hub 3-0:1.0: standalone hub
>hub 3-0:1.0: no power switching (usb 1.0)
>hub 3-0:1.0: individual port over-current protection
>hub 3-0:1.0: power on to power good time: 2ms
>hub 3-0:1.0: local power source is good
>hub 3-0:1.0: trying to enable port power on non-switchable hub
>usb 1-6: link qh256-0001/f6ea7100 start 255 [1/0 us]
>drivers/usb/core/inode.c: creating file '002'
>usb 1-6: New USB device found, idVendor=17ef, idProduct=1000
>usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s
>drivers/usb/core/inode.c: creating file '001'
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.27-0.173.rc0.git11.fc10.i686 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>ehci_hcd 0000:00:1d.7: port 7 full speed --> companion
>ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003801 POWER OWNER sig=j CONNECT
>hub 1-0:1.0: port 7 not reset yet, waiting 50ms
>uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '004'
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: detected 2 ports
>uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.2: Performing full reset
>uhci_hcd 0000:00:1d.2: supports USB remote wakeup
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
>ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC
>hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s
>usb usb4: default language 0x0409
>usb usb4: uevent
>usb usb4: usb_probe_device
>usb usb4: configuration #1 chosen from 1 choice
>usb usb4: adding 4-0:1.0 (config #1, interface 0)
>usb 4-0:1.0: uevent
>hub 4-0:1.0: usb_probe_interface
>hub 4-0:1.0: usb_probe_interface - got id
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hub 4-0:1.0: standalone hub
>hub 4-0:1.0: no power switching (usb 1.0)
>hub 4-0:1.0: individual port over-current protection
>hub 4-0:1.0: power on to power good time: 2ms
>hub 4-0:1.0: local power source is good
>hub 4-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:1d.7: port 8 full speed --> companion
>ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003801 POWER OWNER sig=j CONNECT
>hub 1-0:1.0: port 8 not reset yet, waiting 50ms
>ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003002 POWER OWNER sig=se0 CSC
>hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 1-6:1.0: state 7 ports 4 chg 0004 evt 0000
>hub 1-6:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
>hub 1-6:1.0: port 2 not reset yet, waiting 10ms
>uhci_hcd 0000:00:1d.2: port 2 portsc 008a,00
>usb 1-6.2: new low speed USB device using ehci_hcd and address 5
>hub 1-6:1.0: port 2 not reset yet, waiting 10ms
>drivers/usb/core/inode.c: creating file '001'
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.27-0.173.rc0.git11.fc10.i686 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '005'
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: detected 2 ports
>uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.3: Performing full reset
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
>usb usb5: default language 0x0409
>usb usb5: uevent
>usb usb5: usb_probe_device
>usb usb5: configuration #1 chosen from 1 choice
>usb usb5: adding 5-0:1.0 (config #1, interface 0)
>usb 5-0:1.0: uevent
>hub 5-0:1.0: usb_probe_interface
>hub 5-0:1.0: usb_probe_interface - got id
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>hub 5-0:1.0: standalone hub
>hub 5-0:1.0: no power switching (usb 1.0)
>hub 5-0:1.0: individual port over-current protection
>hub 5-0:1.0: power on to power good time: 2ms
>hub 5-0:1.0: local power source is good
>hub 5-0:1.0: trying to enable port power on non-switchable hub
>usb 1-6.2: skipped 1 descriptor after interface
>usb 1-6.2: skipped 1 descriptor after interface
>usb 1-6.2: default language 0x0409
>usb 1-6.2: uevent
>usb 1-6.2: usb_probe_device
>usb 1-6.2: configuration #1 chosen from 1 choice
>usb 1-6.2: adding 1-6.2:1.0 (config #1, interface 0)
>usb 1-6.2:1.0: uevent
>usbhid 1-6.2:1.0: usb_probe_interface
>usbhid 1-6.2:1.0: usb_probe_interface - got id
>input: P.I. Engineering PC Keyboard/Mouse to USB  Adapter as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.2/1-6.2:1.0/input/input6
>usb 1-6.2: link qh8-0e01/f6ea7200 start 7 [1/2 us]
>input,hidraw0: USB HID v1.00 Keyboard [P.I. Engineering PC Keyboard/Mouse to USB  Adapter] on usb-0000:00:1d.7-6.2
>usb 1-6.2: adding 1-6.2:1.1 (config #1, interface 1)
>usb 1-6.2:1.1: uevent
>usbhid 1-6.2:1.1: usb_probe_interface
>usbhid 1-6.2:1.1: usb_probe_interface - got id
>input: P.I. Engineering PC Keyboard/Mouse to USB  Adapter as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.2/1-6.2:1.1/input/input7
>input,hidraw1: USB HID v1.00 Mouse [P.I. Engineering PC Keyboard/Mouse to USB  Adapter] on usb-0000:00:1d.7-6.2
>drivers/usb/core/inode.c: creating file '005'
>usb 1-6.2: New USB device found, idVendor=05f3, idProduct=0203
>usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-6.2: Product: PC Keyboard/Mouse to USB  Adapter
>usb 1-6.2: Manufacturer: P.I. Engineering
>uhci_hcd 0000:00:1d.3: port 1 portsc 009b,00
>hub 5-0:1.0: port 1: status 0101 change 0003
>uhci_hcd 0000:00:1d.3: port 2 portsc 009b,00
>hub 5-0:1.0: port 2: status 0101 change 0003
>hub 1-6:1.0: port 3, status 0101, change 0001, 12 Mb/s
>drivers/usb/core/inode.c: creating file '001'
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.27-0.173.rc0.git11.fc10.i686 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>hub 1-6:1.0: debounce: port 3: total 100ms stable 100ms status 0x101
>hub 1-6:1.0: port 3 not reset yet, waiting 10ms
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
>usb usb2: suspend_rh (auto-stop)
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>usb 1-6.3: new high speed USB device using ehci_hcd and address 6
>scsi0 : ahci
>hub 1-6:1.0: port 3 not reset yet, waiting 10ms
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 16
>ata2: DUMMY
>ata3: DUMMY
>ata4: DUMMY
>usb 1-6.3: skipped 3 descriptors after interface
>usb 1-6.3: skipped 2 descriptors after interface
>usb 1-6.3: skipped 1 descriptor after endpoint
>usb 1-6.3: skipped 1 descriptor after interface
>usb 1-6.3: default language 0x0409
>usb 1-6.3: uevent
>usb 1-6.3: usb_probe_device
>usb 1-6.3: configuration #1 chosen from 3 choices
>usb 1-6.3: adding 1-6.3:1.0 (config #1, interface 0)
>usb 1-6.3:1.0: uevent
>drivers/usb/core/inode.c: creating file '006'
>usb 1-6.3: New USB device found, idVendor=05ac, idProduct=1292
>usb 1-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-6.3: Product: iPhone
>usb 1-6.3: Manufacturer: Apple Inc.
>usb 1-6.3: SerialNumber: 99a21bf8a8f65a1ca270e055cd379af92555df60
>usb usb3: suspend_rh (auto-stop)
>hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
>hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 1-6:1.0: state 7 ports 4 chg 0000 evt 0008
>hub 5-0:1.0: state 7 ports 2 chg 0006 evt 0000
>hub 5-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
>usb 5-1: new full speed USB device using uhci_hcd and address 2
>usb usb4: suspend_rh (auto-stop)
>usb 5-1: skipped 1 descriptor after interface
>usb 5-1: default language 0x0409
>usb 5-1: uevent
>usb 5-1: usb_probe_device
>usb 5-1: configuration #1 chosen from 1 choice
>usb 5-1: adding 5-1:1.0 (config #1, interface 0)
>usb 5-1:1.0: uevent
>usb 5-1: adding 5-1:1.1 (config #1, interface 1)
>usb 5-1:1.1: uevent
>usb 5-1: adding 5-1:1.2 (config #1, interface 2)
>usb 5-1:1.2: uevent
>usb 5-1: adding 5-1:1.3 (config #1, interface 3)
>usb 5-1:1.3: uevent
>drivers/usb/core/inode.c: creating file '002'
>usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110
>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 5-1: Product: BCM2045B
>usb 5-1: Manufacturer: Broadcom Corp
>hub 5-0:1.0: port 2, status 0101, change 0000, 12 Mb/s
>usb 5-2: new full speed USB device using uhci_hcd and address 3
>usb 5-2: ep0 maxpacket = 8
>usb 5-2: default language 0x0409
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>usb 5-2: uevent
>usb 5-2: usb_probe_device
>usb 5-2: configuration #1 chosen from 1 choice
>usb 5-2: adding 5-2:1.0 (config #1, interface 0)
>usb 5-2:1.0: uevent
>drivers/usb/core/inode.c: creating file '003'
>usb 5-2: New USB device found, idVendor=0483, idProduct=2016
>usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 5-2: Product: Biometric Coprocessor
>usb 5-2: Manufacturer: STMicroelectronics
>hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
>ata1.00: ATA-6: TOSHIBA MK8032GSX, AS114E, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA48 
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>hub 2-0:1.0: hub_suspend
>usb usb2: bus auto-suspend
>usb usb2: suspend_rh
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK8032GS AS11 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>modprobe used greatest stack depth: 436 bytes left
>hub 3-0:1.0: hub_suspend
>usb usb3: bus auto-suspend
>usb usb3: suspend_rh
>hub 4-0:1.0: hub_suspend
>usb usb4: bus auto-suspend
>usb usb4: suspend_rh
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1216910044.406:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux: 8192 avtab hash slots, 166813 rules.
>SELinux: 8192 avtab hash slots, 166813 rules.
>SELinux:  8 users, 13 roles, 2437 types, 116 bools, 1 sens, 1024 cats
>SELinux:  73 classes, 166813 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>type=1403 audit(1216910045.512:3): policy loaded auid=4294967295 ses=4294967295
>usb usb2: uevent
>usb 2-0:1.0: uevent
>usb usb3: uevent
>usb 3-0:1.0: uevent
>usb usb4: uevent
>usb 4-0:1.0: uevent
>usb usb5: uevent
>usb 5-0:1.0: uevent
>usb 5-1: uevent
>usb 5-1:1.0: uevent
>usb 5-1:1.1: uevent
>usb 5-1:1.2: uevent
>usb 5-1:1.3: uevent
>usb 5-2: uevent
>usb 5-2:1.0: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>usb 1-6: uevent
>usb 1-6.2: uevent
>usb 1-6.2:1.0: uevent
>usb 1-6.2:1.1: uevent
>usb 1-6.3: uevent
>usb 1-6.3:1.0: uevent
>usb 1-6:1.0: uevent
>Bluetooth: Core ver 2.12
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
>e1000e: Copyright (c) 1999-2008 Intel Corporation.
>e1000e 0000:02:00.0: Disabling L1 ASPM
>e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>Bluetooth: HCI USB driver ver 2.9
>hci_usb 5-1:1.0: usb_probe_interface
>hci_usb 5-1:1.0: usb_probe_interface - got id
>hci_usb 5-1:1.2: usb_probe_interface
>hci_usb 5-1:1.2: usb_probe_interface - got id
>hci_usb 5-1:1.3: usb_probe_interface
>hci_usb 5-1:1.3: usb_probe_interface - got id
>usbcore: registered new interface driver hci_usb
>intel_rng: FWH not detected
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>eth0: (PCI Express:2.5GB/s:Width x1) 00:16:d3:26:85:6f
>eth0: Intel(R) PRO/1000 Network Connection
>eth0: MAC: 2, PHY: 2, PBA No: 005302-003
>pata_acpi 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>pata_acpi 0000:00:1f.1: PCI INT C disabled
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds
>iwl3945: Copyright(c) 2003-2008 Intel Corporation
>iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>iwl3945: Detected Intel Wireless WiFi Link 3945ABG
>parport_pc 00:0b: reported by Plug and Play ACPI
>parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
>parport0: Printer, Hewlett-Packard HP LaserJet 5MP
>iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>acpi device:03: registered as cooling_device2
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input8
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>acpi device:07: registered as cooling_device3
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/device:06/input/input9
>ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
>ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay
>ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler
>ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Is dependent on dock
>
>ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added
>ACPI: AC Adapter [AC] (on-line)
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>ACPI: Battery Slot [BAT0] (battery present)
>iwl3945 0000:03:00.0: PCI INT A disabled
>Yenta: CardBus bridge found at 0000:15:00.0 [17aa:201c]
>i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>Yenta: ISA IRQ mask 0x0c38, PCI irq 16
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff
>cs: IO port probe 0x9000-0xcfff: clean.
>pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff
>pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff
>ata_piix 0000:00:1f.1: version 2.12
>firewire_ohci 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:15:00.1 to 64
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi4 : ata_piix
>scsi5 : ata_piix
>ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
>ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
>firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI version 1.0
>sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 18)
>sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>Registered led device: mmc0
>mmc0: SDHCI controller on PCI [0000:15:00.2] using PIO
>ata5.00: ATAPI: MATSHITADVD-RAM UJ-842, RB01, max UDMA/33
>ata5.00: configured for UDMA/33
>ata6: port disabled. ignoring.
>scsi 4:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-842   RB01 PQ: 0 ANSI: 5
>scsi 4:0:0:0: Attached scsi generic sg1 type 5
>HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>hda_intel: probe_mask set to 0x1 for device 17aa:2010
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:2069: chipset global capabilities = 0x4401
>ALSA sound/pci/hda/hda_intel.c:754: codec_mask = 0x3
>ALSA sound/pci/hda/hda_codec.c:2350: hda_codec: model 'thinkpad' is selected for config 17aa:0 (Lenovo Thinkpad)
>thinkpad_acpi: ThinkPad ACPI Extras v0.20
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 7BETD6WW (2.17 ), EC 7BHT40WW-1.13
>thinkpad_acpi: Lenovo ThinkPad X60, model 170685U
>thinkpad_acpi: radio switch found; radios are enabled
>thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
>thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
>Registered led device: tpacpi::thinklight
>Registered led device: tpacpi::power
>Registered led device: tpacpi:orange:batt
>Registered led device: tpacpi:green:batt
>Registered led device: tpacpi::dock_active
>Registered led device: tpacpi::bay_active
>Registered led device: tpacpi::dock_batt
>Registered led device: tpacpi::unknown_led
>Registered led device: tpacpi::standby
>thinkpad_acpi: Lenovo BIOS switched to ACPI backlight control mode
>thinkpad_acpi: standard ACPI backlight interface available, not loading native one...
>input: ThinkPad Extra Buttons as /devices/virtual/input/input10
>firewire_core: created device fw0: GUID 000ae4060029200b, S400
>ppdev: user-space parallel port driver
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>fuse init (API version 7.9)
>SELinux: initialized (dev sda1, type fuseblk), uses genfs_contexts
>Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>Loading iSCSI transport class v2.0-870.
>iscsi: registered transport (tcp)
>iscsi: registered transport (iser)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>iwl3945 0000:03:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
>firmware: requesting iwlwifi-3945-1.ucode
>Registered led device: iwl-phy0:radio
>Registered led device: iwl-phy0:assoc
>Registered led device: iwl-phy0:RX
>Registered led device: iwl-phy0:TX
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
>eth0: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>wlan0: authenticate with AP 00:0d:97:04:0c:be
>wlan0: authenticated
>wlan0: associate with AP 00:0d:97:04:0c:be
>wlan0: associate with AP 00:0d:97:04:0c:be
>wlan0: associate with AP 00:0d:97:04:0c:be
>wlan0: association with AP 00:0d:97:04:0c:be timed out
>eth0: no IPv6 routers present
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:00:02.0: power state changed by ACPI to D0
>pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>usb 1-6.2: link qh8-0e01/f6ea7300 start 7 [1/2 us]
>usb 1-6.2: unlink qh8-0e01/f6ea7300 start 7 [1/2 us]
>ehci_hcd 0000:00:1d.7: reused qh f6ea7300 schedule
>usb 1-6.2: link qh8-0e01/f6ea7300 start 7 [1/2 us]
>usb 1-6.2: unlink qh8-0e01/f6ea7300 start 7 [1/2 us]
>ehci_hcd 0000:00:1d.7: reused qh f6ea7300 schedule
>usb 1-6.2: link qh8-0e01/f6ea7300 start 7 [1/2 us]
>BUG: unable to handle kernel NULL pointer dereference at 00000002
>IP: [<c0427b7d>] sched_mc_power_savings_store+0x1/0x2f
>*pde = 7f3ab067 
>Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
>Modules linked in: i915 drm ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi scsi_transport_iscsi coretemp nf_conntrack_ipv4 ipt_REJECT iptable_filter ip_tables nf_conntrack_netbios_ns nf_conntrack_ipv6 xt_state nf_conntrack xt_tcpudp ip6t_ipv6header ip6t_REJECT ip6table_filter ip6_tables x_tables ipv6 cpufreq_ondemand acpi_cpufreq fuse loop kvm_intel kvm sr_mod cdrom ppdev thinkpad_acpi hwmon snd_hda_intel ata_piix arc4 i2c_i801 snd_seq_dummy i2c_core battery ecb crypto_blkcipher sdhci_pci firewire_ohci firewire_core sdhci ac mmc_core yenta_socket rsrc_nonstatic snd_seq_oss crc_itu_t bay snd_seq_midi_event snd_seq snd_seq_device video snd_pcm_oss snd_mixer_oss output snd_pcm parport_pc parport snd_timer ata_generic snd_page_alloc iwl3945 rfkill pata_acpi snd_hwdep mac80211 snd iTCO_wdt iTCO_vendor_support hci_usb soundcore cfg80211 e1000e bluetooth dm_snapshot dm_zero dm_mirror dm_log dm_mod ahci ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd
>
>Pid: 3079, comm: sched-powersave Not tainted (2.6.27-0.173.rc0.git11.fc10.i686 #1)
>EIP: 0060:[<c0427b7d>] EFLAGS: 00010282 CPU: 1
>EIP is at sched_mc_power_savings_store+0x1/0x2f
>EAX: c07b8414 EBX: c0427b7c ECX: 00000002 EDX: ebe42000
>ESI: c07b8454 EDI: ebe42000 EBP: f3932f44 ESP: f3932f30
> DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
>Process sched-powersave (pid: 3079, ti=f3932000 task=f3b647a0 task.ti=f3932000)
>Stack: f3932f44 c05896eb c07b80b0 f7c2e7e8 f4191e70 f3932f74 c04d671a 00000002 
>       00000002 b7fbb000 ebe46000 f4191e84 c07b80b0 c07b8454 00000002 ebe46000 
>       c04d665c f3932f90 c0499ab9 f3932f9c b7fbb000 ebe46000 fffffff7 b7fbb000 
>Call Trace:
> [<c05896eb>] ? sysdev_class_store+0x25/0x2a
> [<c04d671a>] ? sysfs_write_file+0xbe/0xe9
> [<c04d665c>] ? sysfs_write_file+0x0/0xe9
> [<c0499ab9>] ? vfs_write+0x89/0xe4
> [<c0499bb7>] ? sys_write+0x40/0x65
> [<c0403d0e>] ? syscall_call+0x7/0xb
> [<c068007b>] ? arch_prepare_kprobe+0xf0/0x16b
> =======================
>Code: c0 01 76 0d 8d 43 40 ba b4 f0 79 c0 e8 e5 f0 0a 00 5b 5d c3 55 89 e5 e8 4e 61 00 00 e8 1c 5c 03 00 e8 f9 60 00 00 31 c0 5d c3 55 <8a> 09 ba ea ff ff ff 89 e5 8d 41 d0 3c 01 77 1a 31 c0 80 f9 31 
>EIP: [<c0427b7d>] sched_mc_power_savings_store+0x1/0x2f SS:ESP 0068:f3932f30
>---[ end trace 114c6d5ae1aeef70 ]---
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
>wlan0: authenticate with AP 00:12:17:46:42:51
>wlan0: authenticated
>wlan0: associate with AP 00:12:17:46:42:51
>wlan0: associate with AP 00:12:17:46:42:51
>wlan0: associate with AP 00:12:17:46:42:51
>wlan0: association with AP 00:12:17:46:42:51 timed out
>BUG: unable to handle kernel NULL pointer dereference at 00000002
>IP: [<c0427b7d>] sched_mc_power_savings_store+0x1/0x2f
>*pde = 7e144067 
>Oops: 0000 [#2] SMP DEBUG_PAGEALLOC
>Modules linked in: i915 drm ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi scsi_transport_iscsi coretemp nf_conntrack_ipv4 ipt_REJECT iptable_filter ip_tables nf_conntrack_netbios_ns nf_conntrack_ipv6 xt_state nf_conntrack xt_tcpudp ip6t_ipv6header ip6t_REJECT ip6table_filter ip6_tables x_tables ipv6 cpufreq_ondemand acpi_cpufreq fuse loop kvm_intel kvm sr_mod cdrom ppdev thinkpad_acpi hwmon snd_hda_intel ata_piix arc4 i2c_i801 snd_seq_dummy i2c_core battery ecb crypto_blkcipher sdhci_pci firewire_ohci firewire_core sdhci ac mmc_core yenta_socket rsrc_nonstatic snd_seq_oss crc_itu_t bay snd_seq_midi_event snd_seq snd_seq_device video snd_pcm_oss snd_mixer_oss output snd_pcm parport_pc parport snd_timer ata_generic snd_page_alloc iwl3945 rfkill pata_acpi snd_hwdep mac80211 snd iTCO_wdt iTCO_vendor_support hci_usb soundcore cfg80211 e1000e bluetooth dm_snapshot dm_zero dm_mirror dm_log dm_mod ahci ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd
>
>Pid: 3330, comm: sched-powersave Tainted: G      D   (2.6.27-0.173.rc0.git11.fc10.i686 #1)
>EIP: 0060:[<c0427b7d>] EFLAGS: 00010282 CPU: 0
>EIP is at sched_mc_power_savings_store+0x1/0x2f
>EAX: c07b8414 EBX: c0427b7c ECX: 00000002 EDX: eac32000
>ESI: c07b8454 EDI: eac32000 EBP: eac3ef44 ESP: eac3ef30
> DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
>Process sched-powersave (pid: 3330, ti=eac3e000 task=ebdfafc0 task.ti=eac3e000)
>Stack: eac3ef44 c05896eb c07b80b0 f7c2e7e8 ebe25000 eac3ef74 c04d671a 00000002 
>       00000002 b7fc4000 ebf51700 ebe25014 c07b80b0 c07b8454 00000002 ebf51700 
>       c04d665c eac3ef90 c0499ab9 eac3ef9c b7fc4000 ebf51700 fffffff7 b7fc4000 
>Call Trace:
> [<c05896eb>] ? sysdev_class_store+0x25/0x2a
> [<c04d671a>] ? sysfs_write_file+0xbe/0xe9
> [<c04d665c>] ? sysfs_write_file+0x0/0xe9
> [<c0499ab9>] ? vfs_write+0x89/0xe4
> [<c0499bb7>] ? sys_write+0x40/0x65
> [<c0403d0e>] ? syscall_call+0x7/0xb
> [<c068007b>] ? arch_prepare_kprobe+0xf0/0x16b
> =======================
>Code: c0 01 76 0d 8d 43 40 ba b4 f0 79 c0 e8 e5 f0 0a 00 5b 5d c3 55 89 e5 e8 4e 61 00 00 e8 1c 5c 03 00 e8 f9 60 00 00 31 c0 5d c3 55 <8a> 09 ba ea ff ff ff 89 e5 8d 41 d0 3c 01 77 1a 31 c0 80 f9 31 
>EIP: [<c0427b7d>] sched_mc_power_savings_store+0x1/0x2f SS:ESP 0068:eac3ef30
>---[ end trace 114c6d5ae1aeef70 ]---
>usb usb4: usb auto-resume
>usb usb4: wakeup_rh
>hub 4-0:1.0: hub_resume
>hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
>usb usb3: usb auto-resume
>usb usb3: wakeup_rh
>hub 3-0:1.0: hub_resume
>usb usb2: usb auto-resume
>usb usb2: wakeup_rh
>hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 2-0:1.0: hub_resume
>hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
>usb usb3: suspend_rh (auto-stop)
>usb usb2: suspend_rh (auto-stop)
>usb usb4: suspend_rh (auto-stop)
>hub 4-0:1.0: hub_suspend
>usb usb4: bus auto-suspend
>usb usb4: suspend_rh
>hub 3-0:1.0: hub_suspend
>usb usb3: bus auto-suspend
>usb usb3: suspend_rh
>hub 2-0:1.0: hub_suspend
>usb usb2: bus auto-suspend
>usb usb2: suspend_rh
>wlan0: authenticate with AP 00:12:17:46:42:51
>wlan0: authenticated
>wlan0: associate with AP 00:12:17:46:42:51
>wlan0: associate with AP 00:12:17:46:42:51
>wlan0: associate with AP 00:12:17:46:42:51
>wlan0: association with AP 00:12:17:46:42:51 timed out
>wlan0: authenticate with AP 00:12:17:46:42:51
>wlan0: authenticated
>wlan0: associate with AP 00:12:17:46:42:51
>wlan0: associate with AP 00:12:17:46:42:51
>wlan0: associate with AP 00:12:17:46:42:51
>wlan0: association with AP 00:12:17:46:42:51 timed out
>wlan0: authenticate with AP 00:12:17:46:42:51
>wlan0: authenticate with AP 00:12:17:46:42:51
>wlan0: authenticated
>wlan0: associate with AP 00:12:17:46:42:51
>wlan0: associate with AP 00:12:17:46:42:51
>wlan0: associate with AP 00:12:17:46:42:51
>wlan0: association with AP 00:12:17:46:42:51 timed out
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011

Actions: View

Attachments on bug 456608: 312600 | 312601 | 312817 | 312818