Attachment 312762 Details for Bug 443259 – dmesg output for comment 16

dmesg output for comment 16

dmesg.txt (text/plain), 29.46 KB, created by Igor Bukanov on 2008-07-28 10:45:14 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Igor Bukanov

Created: 2008-07-28 10:45:14 UTC

Size: 29.46 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.25.11-97.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Mon Jul 21 01:31:09 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000004f7d1800 (usable)
> BIOS-e820: 000000004f7d1800 - 0000000050000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
> BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>375MB HIGHMEM available.
>896MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>Scan SMP from c009f000 for 1024 bytes.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 325585) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   325585
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   325585
>On node 0 totalpages: 325585
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 751 pages used for memmap
>  HighMem zone: 95458 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FC9B0, 0014 (r0 DELL  )
>ACPI: RSDT 4F7D1F90, 0040 (r1 DELL    CPi R   27D50405 ASL        61)
>ACPI: FACP 4F7D2C00, 0074 (r1 DELL    CPi R   27D50405 ASL        61)
>ACPI: DSDT 4F7D3800, 2F92 (r1 INT430 SYSFexxx     1001 MSFT  100000E)
>ACPI: FACS 4F7E2000, 0040
>ACPI: APIC 4F7D3400, 0068 (r1 DELL    CPi R   27D50405 ASL        47)
>ACPI: ASF! 4F7D3000, 005B (r16 DELL    CPi R   27D50405 ASL        61)
>ACPI: MCFG 4F7D33C0, 003E (r16 DELL    CPi R   27D50405 ASL        61)
>ACPI: SSDT 4F7D23E6, 0280 (r1  PmRef  Cpu0Ist     3000 INTL 20030522)
>ACPI: SSDT 4F7D220E, 01D8 (r1  PmRef  Cpu0Cst     3001 INTL 20030522)
>ACPI: SSDT 4F7D2013, 01FB (r1  PmRef    CpuPm     3000 INTL 20030522)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 60000000 (gap: 50000000:90000000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 323042
>Kernel command line: ro root=UUID=6a4afb80-b0b8-4fc5-b973-8d018ecdfae0 quiet i915.modeset=1
>Unknown boot option `i915.modeset=1': ignoring
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07b8000 soft=c0798000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1097.320 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1282852k/1302340k available (2234k kernel code, 18212k reserved, 1119k data, 284k init, 384836k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc074e000 - 0xc0795000   ( 284 kB)
>      .data : 0xc062ea45 - 0xc0746800   (1119 kB)
>      .text : 0xc0400000 - 0xc062ea45   (2234 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 2196.53 BogoMIPS (lpj=1098269)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 20k freed
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) M processor 1.10GHz stepping 08
>Total of 1 processors activated (2196.53 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=3696 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 10:26:24  Date: 07/28/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: SSDT 4F7D1FD0, 0043 (r1  LMPWR  DELLLOM     1001 INTL 20030522)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnpacpi: exceeded the max number of IO resources: 40 
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>system 00:00: iomem range 0x0-0x9fbff could not be reserved
>system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xcffff could not be reserved
>system 00:00: iomem range 0xe0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x4f7d17ff could not be reserved
>system 00:00: iomem range 0x4f7d1800-0x4f7fffff could not be reserved
>system 00:00: iomem range 0x4f800000-0x4fffffff could not be reserved
>system 00:00: iomem range 0xfeda0000-0xfedfffff could not be reserved
>system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
>system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved
>system 00:00: iomem range 0xfed20000-0xfed9ffff could not be reserved
>system 00:00: iomem range 0xf0000000-0xf0003fff could not be reserved
>system 00:00: iomem range 0xf0004000-0xf0004fff could not be reserved
>system 00:00: iomem range 0xf0005000-0xf0005fff could not be reserved
>system 00:00: iomem range 0xf0006000-0xf0006fff could not be reserved
>system 00:00: iomem range 0xf0008000-0xf000bfff could not be reserved
>system 00:00: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:02: ioport range 0x1000-0x1005 has been reserved
>system 00:02: ioport range 0x1008-0x100f has been reserved
>system 00:03: ioport range 0xf400-0xf4fe has been reserved
>system 00:03: ioport range 0x1006-0x1007 has been reserved
>system 00:03: ioport range 0x100a-0x1059 could not be reserved
>system 00:03: ioport range 0x1060-0x107f has been reserved
>system 00:03: ioport range 0x1080-0x10bf has been reserved
>system 00:03: ioport range 0x10c0-0x10df has been reserved
>system 00:03: ioport range 0x10e0-0x10ff has been reserved
>system 00:08: ioport range 0x900-0x90f has been reserved
>system 00:08: ioport range 0x910-0x91f has been reserved
>system 00:08: ioport range 0x920-0x92f has been reserved
>system 00:08: ioport range 0x93c-0x93f has been reserved
>system 00:08: ioport range 0x940-0x97f has been reserved
>system 00:0b: ioport range 0x930-0x93b has been reserved
>system 00:0c: ioport range 0x7b0-0x7bb has been reserved
>system 00:0c: ioport range 0x7c0-0x7df has been reserved
>system 00:0c: ioport range 0xbb0-0xbbb has been reserved
>system 00:0c: ioport range 0xbc0-0xbdf has been reserved
>system 00:0c: ioport range 0xfb0-0xfbb has been reserved
>system 00:0c: ioport range 0xfc0-0xfdf has been reserved
>system 00:0c: ioport range 0x13b0-0x13bb has been reserved
>system 00:0c: ioport range 0x13c0-0x13df has been reserved
>system 00:0c: ioport range 0x17b0-0x17bb has been reserved
>system 00:0c: ioport range 0x17c0-0x17df has been reserved
>system 00:0c: ioport range 0x1bb0-0x1bbb has been reserved
>system 00:0c: ioport range 0x1bc0-0x1bdf has been reserved
>system 00:0c: ioport range 0x1fb0-0x1fbb has been reserved
>system 00:0c: ioport range 0x1fc0-0x1fdf has been reserved
>system 00:0c: ioport range 0x23b0-0x23bb has been reserved
>system 00:0c: ioport range 0x23c0-0x23df has been reserved
>system 00:0c: ioport range 0x27b0-0x27bb has been reserved
>system 00:0c: ioport range 0x27c0-0x27df has been reserved
>system 00:0c: ioport range 0x2bb0-0x2bbb has been reserved
>system 00:0c: ioport range 0x2bc0-0x2bdf has been reserved
>system 00:0c: ioport range 0x2fb0-0x2fbb has been reserved
>system 00:0c: ioport range 0x2fc0-0x2fdf has been reserved
>system 00:0c: ioport range 0x33b0-0x33bb has been reserved
>system 00:0c: ioport range 0x33c0-0x33df has been reserved
>system 00:0c: ioport range 0x37b0-0x37bb has been reserved
>system 00:0c: ioport range 0x37c0-0x37df has been reserved
>system 00:0c: ioport range 0x3bb0-0x3bbb has been reserved
>system 00:0c: ioport range 0x3bc0-0x3bdf has been reserved
>system 00:0c: ioport range 0x3fb0-0x3fbb has been reserved
>system 00:0c: ioport range 0x3fc0-0x3fdf has been reserved
>system 00:0c: ioport range 0x43b0-0x43bb has been reserved
>system 00:0c: ioport range 0x43c0-0x43df has been reserved
>system 00:0c: ioport range 0x47b0-0x47bb has been reserved
>system 00:0c: ioport range 0x47c0-0x47df has been reserved
>system 00:0c: ioport range 0x4bb0-0x4bbb has been reserved
>system 00:0c: ioport range 0x4bc0-0x4bdf has been reserved
>system 00:0c: ioport range 0x4fb0-0x4fbb has been reserved
>system 00:0c: ioport range 0x4fc0-0x4fdf has been reserved
>system 00:0c: ioport range 0x53b0-0x53bb has been reserved
>system 00:0c: ioport range 0x53c0-0x53df has been reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: 0xdfd00000-0xdfdfffff
>  PREFETCH window: disabled.
>PCI: Bus 3, cardbus bridge: 0000:02:01.0
>  IO window: 0x00006000-0x000060ff
>  IO window: 0x00006400-0x000064ff
>  PREFETCH window: 0x60000000-0x63ffffff
>  MEM window: 0x64000000-0x67ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 6000-6fff
>  MEM window: 0xdfc00000-0xdfcfffff
>  PREFETCH window: 0x0000000060000000-0x0000000063ffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 19
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2654k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1217240783.611:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THM] (60 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel 915GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xc0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>Yenta: CardBus bridge found at 0000:02:01.0 [1028:01a3]
>Yenta: ISA IRQ mask 0x0cb8, PCI irq 19
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
>pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
>cs: IO port probe 0x6000-0x6fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xdfc00000 - 0xdfcfffff
>pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 0:544:427
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 908k
>Marking TSC unstable due to: TSC halts in idle.
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25.11-97.fc9.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25.11-97.fc9.i686 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25.11-97.fc9.i686 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hub 1-0:1.0: unable to enumerate USB device on port 3
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25.11-97.fc9.i686 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000bf20
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25.11-97.fc9.i686 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>usb 3-1: configuration #1 chosen from 1 choice
>usb 3-1: New USB device found, idVendor=413c, idProduct=8103
>usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
>ata1.00: ATA-6: TOSHIBA MK6006GAH, BZ002A, max UDMA/100
>ata1.00: 117210240 sectors, multi 8: LBA48 
>ata1.00: configured for UDMA/100
>ata2: port disabled. ignoring.
>scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK6006GA BZ00 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1217240790.941:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux:8192 avtab hash slots allocated. Num of rules:170919
>SELinux:8192 avtab hash slots allocated. Num of rules:170919
>security:  8 users, 12 roles, 2350 types, 115 bools, 1 sens, 1024 cats
>security:  72 classes, 170919 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1217240792.670:3): policy loaded auid=4294967295 ses=4294967295
>Clocksource tsc unstable (delta = -180253014 ns)
>tg3.c:v3.91 (April 18, 2008)
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:13:72:6a:d8:40
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>[drm] Initialized drm 1.1.0 20060810
>intel_rng: FWH not detected
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>iTCO_vendor_support: vendor-support=0
>ACPI: AC Adapter [AC] (on-line)
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>setting up 8122368 bytes of VRAM space
>setting up 260313088 bytes of TT space
>ACPI: Battery Slot [BAT0] (battery present)
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
>ACPI: Sleep Button (CM) [SBTN]
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:18/input/input6
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1d/input/input7
>ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
>integrated sync not supported
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>ACPI: PCI Interrupt 0000:02:01.1[B] -> GSI 18 (level, low) -> IRQ 18
>firewire_ohci: Added fw-ohci device 0000:02:01.1, OHCI version 1.10
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:02:01.2 [1180:0822] (rev 17)
>ACPI: PCI Interrupt 0000:02:01.2[C] -> GSI 17 (level, low) -> IRQ 17
>mmc0: SDHCI at 0xdfcfe700 irq 17 DMA
>i2c-adapter i2c-0: unable to read EDID block.
>ieee80211_crypt: registered algorithm 'NULL'
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>i2c-adapter i2c-0: unable to read EDID block.
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
>ipw2200: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 17 (level, low) -> IRQ 17
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>firewire_core: created device fw0: GUID 484fc00025b01c50, S400
>input: PC Speaker as /devices/platform/pcspkr/input/input8
>integrated sync not supported
>allocated 2048x2048 fb: 0x007bf000, bo f6e20e00
>fbcon: intelfb (fb0) is primary device
>[drm] LVDS-1: set mode 1280x768 13
>Console: switching to colour frame buffer device 160x48
>fb0: intelfb frame buffer device
>[drm] LVDS-1: set mode 1280x768 13
>[drm] Initialized i915 1.12.0 20071122 on minor 0
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
>ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1e.2 to 64
>intel8x0_measure_ac97_clock: measured 50784 usecs
>intel8x0: clocking to 48000
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure.
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: BNEP (Ethernet Emulation) ver 1.2
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>integrated sync not supported
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>integrated sync not supported
>Xorg[1962]: segfault at ff080a10 ip 080c9d58 sp bfb02780 error 4 in Xorg[8047000+1a4000]
>[drm] LVDS-1: set mode 1280x768 13
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>integrated sync not supported
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>integrated sync not supported
>Xorg[1978]: segfault at ff080a10 ip 080c9d58 sp bfe33b90 error 4 in Xorg[8047000+1a4000]
>eth1: no IPv6 routers present
>[drm] LVDS-1: set mode 1280x768 13

Actions: View

Attachments on bug 443259: 303012 | 303013 | 303014 | 303015 | 303016 | 303017 | 303018 | 303019 | 303020 | 303021 | 303022 | 303023 | 303024 | 312761 | 312762