Attachment 313025 Details for Bug 457287 – dmesg

dmesg

dmesg.txt (text/plain), 32.86 KB, created by Fabrice Bellet on 2008-07-30 19:50:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Fabrice Bellet

Created: 2008-07-30 19:50:57 UTC

Size: 32.86 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27-0.186.rc0.git15.fc10.i686 (mockbuild@x86-1) (gcc version 4.3.1 20080708 (Red Hat 4.3.1-4) (GCC) ) #1 SMP Sun Jul 27 05:22:35 EDT 2008
>PAT disabled. Not yet verified on this CPU type.
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ff60000 (usable)
> BIOS-e820: 000000003ff60000 - 000000003ff77000 (ACPI data)
> BIOS-e820: 000000003ff77000 - 000000003ff79000 (ACPI NVS)
> BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
>last_pfn = 0x3ff60 max_arch_pfn = 0x100000
>kernel direct mapping tables up to 38000000 @ 7000-c000
>Using x86 segment limits to approximate NX protection
>RAMDISK: 37d8e000 - 37fef883
>DMI present.
>ACPI: RSDP 000F6D70, 0024 (r2 IBM   )
>ACPI: XSDT 3FF6A672, 004C (r1 IBM    TP-1R        3230  LTP        0)
>ACPI: FACP 3FF6A700, 00F4 (r3 IBM    TP-1R        3230 IBM         1)
>ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080609]
>ACPI: DSDT 3FF6A8E7, C530 (r1 IBM    TP-1R        3230 MSFT  100000E)
>ACPI: FACS 3FF78000, 0040
>ACPI: SSDT 3FF6A8B4, 0033 (r1 IBM    TP-1R        3230 MSFT  100000E)
>ACPI: ECDT 3FF76E17, 0052 (r1 IBM    TP-1R        3230 IBM         1)
>ACPI: TCPA 3FF76E69, 0032 (r1 IBM    TP-1R        3230 PTL         1)
>ACPI: BOOT 3FF76FD8, 0028 (r1 IBM    TP-1R        3230  LTP        1)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>  mapped low ram: 0 - 38000000
>  low ram: 00000000 - 38000000
>  bootmap 00008000 - 0000f000
>(9 early reservations) ==> bootmem [0000000000 - 0038000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000400000 - 0000c34594]    TEXT DATA BSS ==> [0000400000 - 0000c34594]
>  #4 [0037d8e000 - 0037fef883]          RAMDISK ==> [0037d8e000 - 0037fef883]
>  #5 [0000c35000 - 0000c4a000]    INIT_PG_TABLE ==> [0000c35000 - 0000c4a000]
>  #6 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
>  #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
>  #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>Scan SMP from c009f000 for 1024 bytes.
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x00038000
>  HighMem  0x00038000 -> 0x0003ff60
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0003ff60
>On node 0 totalpages: 261887
>free_area_init_node: node 0, pgdat c07a9380, node_mem_map c1001000
>  DMA zone: 3943 pages, LIFO batch:0
>  Normal zone: 222200 pages, LIFO batch:31
>  HighMem zone: 32162 pages, LIFO batch:7
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>Local APIC disabled by BIOS -- reenabling.
>Found and enabled local APIC!
>mapped APIC to ffffb000 (fee00000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
>PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
>PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>Allocating PCI resources starting at 50000000 (gap: 40000000:bf800000)
>PERCPU: Allocating 336436 bytes of per cpu data
>NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258305
>Kernel command line: ro root=LABEL=/ elevator=as lapic hpet=force
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c089d000 soft=c087d000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Extended CMOS year: 2000
>TSC calibrated against PM_TIMER
>Detected 1598.639 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1088 kB
> per task-struct memory footprint: 2688 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1020704k/1047936k available (2580k kernel code, 26528k reserved, 1366k data, 620k init, 130432k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc57000 - 0xfffff000   (3744 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc07df000 - 0xc087a000   ( 620 kB)
>      .data : 0xc068510c - 0xc07dac78   (1366 kB)
>      .text : 0xc0400000 - 0xc068510c   (2580 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 16 of 16 pages preallocated
>SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>Calibrating delay loop (skipped), value calculated using timer frequency.. <6>3197.27 BogoMIPS (lpj=1598639)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>debug: unmapping init memory c07dc000..c07df000
>ACPI: Core revision 20080609
>ACPI: setting ELCR to 0200 (from 0800)
>weird, boot CPU (#0) not listedby the BIOS.
>SMP motherboard not detected.
>SMP disabled
>Brought up 1 CPUs
>Total of 1 processors activated (3197.27 BogoMIPS).
>sizeof(vma)=84 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=608 bytes
>sizeof(dentry)=160 bytes
>sizeof(ext3inode)=860 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=184 bytes
>sizeof(task_struct)=6064 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0 level CPU
>  groups: 0
>khelper used greatest stack depth: 3016 bytes left
>net_namespace: 896 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 19:42:11  Date: 07/30/08
>NET: Registered protocol family 16
>ACPI: ACPI Dock Station Driver
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
>PCI: Using configuration type 1 for base access
>khelper used greatest stack depth: 2424 bytes left
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
>pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1f.5: PME# disabled
>pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
>pci 0000:00:1f.6: PME# disabled
>pci 0000:01:00.0: supports D1
>pci 0000:01:00.0: supports D2
>pci 0000:02:00.0: supports D1
>pci 0000:02:00.0: supports D2
>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:00.1: supports D1
>pci 0000:02:00.1: supports D2
>pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:00.1: PME# disabled
>pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:01.0: PME# disabled
>pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:02.0: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>bus 00 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: Power Resource [PUBS] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>tracer: 772 pages allocated for 65536 entries of 48 bytes
>   actual entries 65620
>ACPI: RTC can wake from S4
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
>system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
>system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
>system 00:00: iomem range 0xcc000-0xcffff could not be reserved
>system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
>system 00:00: iomem range 0xdc000-0xdffff could not be reserved
>system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
>system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
>system 00:00: iomem range 0xe8000-0xebfff could not be reserved
>system 00:00: iomem range 0xec000-0xeffff could not be reserved
>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x3fffffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
>system 00:02: ioport range 0x1000-0x107f has been reserved
>system 00:02: ioport range 0x1180-0x11bf has been reserved
>system 00:02: ioport range 0x15e0-0x15ef has been reserved
>system 00:02: ioport range 0x1600-0x162f has been reserved
>system 00:02: ioport range 0x1632-0x167f has been reserved
>system 00:02: ioport range 0x1630-0x1631 has been reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: 0x3000-0x3fff
>pci 0000:00:01.0:   MEM window: 0xc0100000-0xc01fffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000e0000000-0x000000e7ffffff
>pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03
>pci 0000:02:00.0:   IO window: 0x004000-0x0040ff
>pci 0000:02:00.0:   IO window: 0x004400-0x0044ff
>pci 0000:02:00.0:   PREFETCH window: 0xe8000000-0xebffffff
>pci 0000:02:00.0:   MEM window: 0xc4000000-0xc7ffffff
>pci 0000:02:00.1: CardBus bridge, secondary bus 0000:07
>pci 0000:02:00.1:   IO window: 0x004800-0x0048ff
>pci 0000:02:00.1:   IO window: 0x004c00-0x004cff
>pci 0000:02:00.1:   PREFETCH window: 0xec000000-0xefffffff
>pci 0000:02:00.1:   MEM window: 0xc8000000-0xcbffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1e.0:   IO window: 0x4000-0x8fff
>pci 0000:00:1e.0:   MEM window: 0xc0200000-0xcfffffff
>pci 0000:00:1e.0:   PREFETCH window: 0x000000e8000000-0x000000efffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>pci 0000:02:00.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>debug: unmapping init memory f7d8e000..f7ff0000
>Simple Boot Flag at 0x35 set to 0x1
>IBM machine detected. Enabling interrupts during APM calls.
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1217446932.101:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1739
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered (default)
>io scheduler deadline registered
>io scheduler cfq registered
>pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000
>pci 0000:00:1d.0: Performing full reset
>pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
>pci 0000:00:1d.1: Performing full reset
>pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
>pci 0000:00:1d.2: Performing full reset
>pci 0000:01:00.0: Boot video device
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI0007:00: registered as cooling_device0
>ACPI: Processor [CPU] (supports 8 throttling states)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM0] (50 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel 855PM Chipset.
>agpgart: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>serial 00:0a: activated
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
>serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
>serial 0000:00:1f.6: PCI INT B disabled
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input3
>Driver 'sd' needs updating - please use bus_type methods
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 0:960:749
>tty ttyS0: hash matches
>debug: unmapping init memory c07df000..c087a000
>Write protecting the kernel read-only data: 1124k
>Marking TSC unstable due to TSC halts in idle
>ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
>ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>drivers/usb/core/inode.c: creating file 'devices'
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
>ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
>ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: supports USB remote wakeup
>ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
>ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: default language 0x0409
>usb usb1: uevent
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>usb 1-0:1.0: uevent
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 5: status 0501 change 0001
>drivers/usb/core/inode.c: creating file '001'
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27-0.186.rc0.git15.fc10.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>modprobe used greatest stack depth: 1436 bytes left
>hub 1-0:1.0: state 7 ports 6 chg 0020 evt 0000
>hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd: block sizes: ed 64 td 64
>USB Universal Host Controller Interface driver v3.0
>uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '002'
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: detected 2 ports
>uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.0: Performing full reset
>uhci_hcd 0000:00:1d.0: supports USB remote wakeup
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
>usb usb2: default language 0x0409
>usb usb2: uevent
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>usb 2-0:1.0: uevent
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: individual port over-current protection
>hub 2-0:1.0: power on to power good time: 2ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:1d.7: port 5 full speed --> companion
>ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003801 POWER OWNER sig=j CONNECT
>hub 1-0:1.0: port 5 not reset yet, waiting 50ms
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
>serio: Synaptics pass-through port at isa0060/serio1/input0
>ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC
>hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0020
>drivers/usb/core/inode.c: creating file '001'
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27-0.186.rc0.git15.fc10.i686 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
>uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '003'
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: detected 2 ports
>uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.1: Performing full reset
>uhci_hcd 0000:00:1d.1: supports USB remote wakeup
>uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
>usb usb3: default language 0x0409
>usb usb3: uevent
>usb usb3: usb_probe_device
>usb usb3: configuration #1 chosen from 1 choice
>usb usb3: adding 3-0:1.0 (config #1, interface 0)
>usb 3-0:1.0: uevent
>hub 3-0:1.0: usb_probe_interface
>hub 3-0:1.0: usb_probe_interface - got id
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hub 3-0:1.0: standalone hub
>hub 3-0:1.0: no power switching (usb 1.0)
>hub 3-0:1.0: individual port over-current protection
>hub 3-0:1.0: power on to power good time: 2ms
>hub 3-0:1.0: local power source is good
>hub 3-0:1.0: trying to enable port power on non-switchable hub
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
>drivers/usb/core/inode.c: creating file '001'
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.27-0.186.rc0.git15.fc10.i686 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '004'
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: detected 2 ports
>uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.2: Performing full reset
>uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
>usb usb4: default language 0x0409
>usb usb4: uevent
>usb usb4: usb_probe_device
>usb usb4: configuration #1 chosen from 1 choice
>usb usb4: adding 4-0:1.0 (config #1, interface 0)
>usb 4-0:1.0: uevent
>hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 4-0:1.0: usb_probe_interface
>hub 4-0:1.0: usb_probe_interface - got id
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hub 4-0:1.0: standalone hub
>hub 4-0:1.0: no power switching (usb 1.0)
>hub 4-0:1.0: individual port over-current protection
>hub 4-0:1.0: power on to power good time: 2ms
>hub 4-0:1.0: local power source is good
>hub 4-0:1.0: trying to enable port power on non-switchable hub
>uhci_hcd 0000:00:1d.2: port 1 portsc 0093,00
>hub 4-0:1.0: port 1: status 0101 change 0001
>drivers/usb/core/inode.c: creating file '001'
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.27-0.186.rc0.git15.fc10.i686 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000
>hub 4-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
>pata_acpi 0000:00:1f.1: enabling device (0005 -> 0007)
>pata_acpi 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>pata_acpi 0000:00:1f.1: PCI INT A disabled
>usb 4-1: new full speed USB device using uhci_hcd and address 2
>usb 4-1: skipped 1 descriptor after interface
>usb 4-1: uevent
>usb 4-1: usb_probe_device
>usb 4-1: configuration #1 chosen from 1 choice
>usb 4-1: adding 4-1:1.0 (config #1, interface 0)
>usb 4-1:1.0: uevent
>usb 4-1: adding 4-1:1.1 (config #1, interface 1)
>usb 4-1:1.1: uevent
>usb 4-1: adding 4-1:1.2 (config #1, interface 2)
>usb 4-1:1.2: uevent
>drivers/usb/core/inode.c: creating file '002'
>usb 4-1: New USB device found, idVendor=1668, idProduct=0441
>usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb usb2: suspend_rh (auto-stop)
>usb usb3: suspend_rh (auto-stop)
>hub 1-0:1.0: hub_suspend
>usb usb1: bus auto-suspend
>ehci_hcd 0000:00:1d.7: suspend root hub
>hub 2-0:1.0: hub_suspend
>usb usb2: bus auto-suspend
>usb usb2: suspend_rh
>hub 3-0:1.0: hub_suspend
>usb usb3: bus auto-suspend
>usb usb3: suspend_rh
>ata_piix 0000:00:1f.1: version 2.12
>ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
>ata1.00: HPA detected: current 189268770, native 195371568
>ata1.00: ATA-6: HTS721010G9AT00, MCZOA51A, max UDMA/100
>ata1.00: 189268770 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: MATSHITADVD-RAM UJ-822S, 1.03, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      HTS721010G9AT00  MCZO PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 189268770 512-byte hardware sectors (96906 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 189268770 512-byte hardware sectors (96906 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-822S  1.03 PQ: 0 ANSI: 5
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>modprobe used greatest stack depth: 700 bytes left
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>usb usb2: uevent
>usb 2-0:1.0: uevent
>usb usb3: uevent
>usb 3-0:1.0: uevent
>usb usb4: uevent
>usb 4-0:1.0: uevent
>usb 4-1: uevent
>usb 4-1:1.0: uevent
>usb 4-1:1.1: uevent
>usb 4-1:1.2: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>Bluetooth: Core ver 2.12
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>iTCO_vendor_support: vendor-support=0
>Bluetooth: HCI USB driver ver 2.9
>hci_usb 4-1:1.0: usb_probe_interface
>hci_usb 4-1:1.0: usb_probe_interface - got id
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
>iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>hci_usb 4-1:1.2: usb_probe_interface
>hci_usb 4-1:1.2: usb_probe_interface - got id
>usbcore: registered new interface driver hci_usb
>intel_rng: FWH not detected
>Yenta: CardBus bridge found at 0000:02:00.0 [1014:0512]
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>Yenta: ISA IRQ mask 0x04b8, PCI irq 11
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
>cs: IO port probe 0x4000-0x8fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
>pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
>Yenta: CardBus bridge found at 0000:02:00.1 [1014:0512]
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:00.1, mfunc 0x01d21022, devctl 0x64
>parport_pc 00:0b: reported by Plug and Play ACPI
>parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
>Yenta: ISA IRQ mask 0x0438, PCI irq 11
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
>cs: IO port probe 0x4000-0x8fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
>pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/device:04/input/input7
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay
>ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler
>ACPI: Error installing bay notify handler
>e1000 0000:02:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0d:60:b0:e6:ac
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery absent)
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>input: PC Speaker as /devices/platform/pcspkr/input/input8
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
>Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>thinkpad_acpi: ThinkPad ACPI Extras v0.21
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 1RETDRWW (3.23 ), EC 1RHT71WW-3.04
>thinkpad_acpi: IBM ThinkPad T40 , model 237392U
>Registered led device: tpacpi::thinklight
>thinkpad_acpi: another device driver is already handling bay events
>thinkpad_acpi: disabling subdriver bay
>Registered led device: tpacpi::power
>Registered led device: tpacpi:orange:batt
>Registered led device: tpacpi:green:batt
>Registered led device: tpacpi::dock_active
>Registered led device: tpacpi::bay_active
>Registered led device: tpacpi::dock_batt
>Registered led device: tpacpi::unknown_led
>Registered led device: tpacpi::standby
>input: ThinkPad Extra Buttons as /devices/virtual/input/input9
>ALSA sound/pci/ac97/ac97_codec.c:2121: AC'97 0 analog subsections not ready
>intel8x0_measure_ac97_clock: measured 50831 usecs
>intel8x0: measured clock 216 rejected
>intel8x0: clocking to 48000
>Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>modprobe used greatest stack depth: 676 bytes left
>ppdev: user-space parallel port driver
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>EXT3 FS on sda3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2094080k swap on /dev/sda6.  Priority:-1 extents:1 across:2094080k
>Clocksource tsc unstable (delta = -224817539 ns)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>eth0: no IPv6 routers present
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:01:00.0: power state changed by ACPI to D0
>pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>[drm] Initialized radeon 1.29.0 20080528 on minor 0
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Setting GART location based on new memory map
>[drm] Loading R200 Microcode
>[drm] writeback test succeeded in 2 usecs

Actions: View

Attachments on bug 457287: 313025