Attachment 313133 Details for Bug 457482 – dmesg before inserting a disk

dmesg before inserting a disk

dmesg-before-disk.txt (text/plain), 40.96 KB, created by Chris Stankaitis on 2008-07-31 21:10:02 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Chris Stankaitis

Created: 2008-07-31 21:10:02 UTC

Size: 40.96 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.25.11-97.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Mon Jul 21 01:09:10 EDT 2008
>Command line: ro root=/dev/md1 rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
> BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
> BIOS-e820: 00000000cffb0000 - 00000000cffbe000 (ACPI data)
> BIOS-e820: 00000000cffbe000 - 00000000cffe0000 (ACPI NVS)
> BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>Entering add_active_range(0, 0, 154) 0 entries of 3200 used
>Entering add_active_range(0, 256, 851888) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
>end_pfn_map = 1245184
>DMI present.
>ACPI: RSDP 000FB0B0, 0014 (r0 ACPIAM)
>ACPI: RSDT CFFB0000, 0038 (r1 122607 OEMRSDT  20071226 MSFT       97)
>ACPI: FACP CFFB0200, 0084 (r2 122607 OEMFACP  20071226 MSFT       97)
>ACPI: DSDT CFFB0440, 943F (r1  P0001 P0001000        0 INTL 20051117)
>ACPI: FACS CFFBE000, 0040
>ACPI: APIC CFFB0390, 006C (r1 122607 OEMAPIC  20071226 MSFT       97)
>ACPI: MCFG CFFB0400, 003C (r1 122607 OEMMCFG  20071226 MSFT       97)
>ACPI: OEMB CFFBE040, 0071 (r1 122607 AMI_OEM  20071226 MSFT       97)
>ACPI: HPET CFFB9880, 0038 (r1 122607 OEMHPET  20071226 MSFT       97)
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000130000000
>Entering add_active_range(0, 0, 154) 0 entries of 3200 used
>Entering add_active_range(0, 256, 851888) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
>Bootmem setup node 0 0000000000000000-0000000130000000
>  NODE_DATA [000000000000e000 - 0000000000015fff]
>  bootmap [0000000000016000 -  000000000003bfff] pages 26
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-7572bb] TEXT DATA BSS
>early res: 3 [37ce8000-37fefc16] RAMDISK
>early res: 4 [9ac00-a0bff] EBDA
>early res: 5 [8000-dfff] PGTABLE
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
> [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
> [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
> [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
> [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
> [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
> [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
> [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
> [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0
> [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0
> [ffffe20003800000-ffffe200039fffff] PMD ->ffff810006e00000 on node 0
> [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810007200000 on node 0
> [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810007600000 on node 0
> [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810007a00000 on node 0
> [ffffe20004000000-ffffe200041fffff] PMD ->ffff810007e00000 on node 0
> [ffffe20004200000-ffffe200043fffff] PMD ->ffff810008200000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1245184
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0:        0 ->      154
>    0:      256 ->   851888
>    0:  1048576 ->  1245184
>On node 0 totalpages: 1048394
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1384 pages reserved
>  DMA zone: 2554 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 833512 pages, LIFO batch:31
>  Normal zone: 2688 pages used for memmap
>  Normal zone: 193920 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>Processor #2
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>Processor #3
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8300 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009a000 - 000000000009b000
>PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
>PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
>PM: Registered nosave memory: 00000000cffb0000 - 00000000cffbe000
>PM: Registered nosave memory: 00000000cffbe000 - 00000000cffe0000
>PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
>PM: Registered nosave memory: 00000000d0000000 - 00000000fff00000
>PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
>Allocating PCI resources starting at d4000000 (gap: d0000000:2ff00000)
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 42688 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1029986
>Policy zone: Normal
>Kernel command line: ro root=/dev/md1 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 2507.613 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Node 0: aperture @ ce6e000000 size 32 MB
>Aperture beyond 4GB. Ignoring.
>No AGP bridge found
>Your BIOS doesn't leave a aperture memory hole
>Please enable the IOMMU option in the BIOS setup
>This costs you 64 MB of RAM
>Mapping aperture over 65536 KB of RAM @ c000000
>PM: Registered nosave memory: 000000000c000000 - 0000000010000000
>Memory: 4059448k/4980736k available (2644k kernel code, 134128k reserved, 1390k data, 348k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 5018.17 BogoMIPS (lpj=2509086)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 12538069
>Detected 12.538 MHz APIC timer.
>Booting processor 1/4 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5015.59 BogoMIPS (lpj=2507798)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Booting processor 2/4 APIC 0x2
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 5015.60 BogoMIPS (lpj=2507801)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 2/2 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 2
>AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
>checking TSC synchronization [CPU#0 -> CPU#2]: passed.
>Booting processor 3/4 APIC 0x3
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 5015.59 BogoMIPS (lpj=2507799)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 3/3 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 3
>AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
>checking TSC synchronization [CPU#0 -> CPU#3]: passed.
>Brought up 4 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=224 bytes
>sizeof(task_struct)=6224 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,0000000f
>  groups: 00000000,00000001 00000000,00000002 00000000,00000004 00000000,00000008
>  domain 1: span 00000000,0000000f
>   groups: 00000000,0000000f
>CPU1 attaching sched-domain:
> domain 0: span 00000000,0000000f
>  groups: 00000000,00000002 00000000,00000004 00000000,00000008 00000000,00000001
>  domain 1: span 00000000,0000000f
>   groups: 00000000,0000000f
>CPU2 attaching sched-domain:
> domain 0: span 00000000,0000000f
>  groups: 00000000,00000004 00000000,00000008 00000000,00000001 00000000,00000002
>  domain 1: span 00000000,0000000f
>   groups: 00000000,0000000f
>CPU3 attaching sched-domain:
> domain 0: span 00000000,0000000f
>  groups: 00000000,00000008 00000000,00000001 00000000,00000002 00000000,00000004
>  domain 1: span 00000000,0000000f
>   groups: 00000000,0000000f
>net_namespace: 1016 bytes
>Time: 20:06:51  Date: 07/31/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: Error attaching device data
>ACPI: Error attaching device data
>ACPI: Error attaching device data
>ACPI: Error attaching device data
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:12.0: set SATA to AHCI mode
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  ED, should be E4 [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-DMA: Disabling AGP.
>PCI-DMA: aperture base @ c000000 size 65536 KB
>PCI-DMA: using GART IOMMU.
>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 32-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:09: ioport range 0x4d0-0x4d1 has been reserved
>system 00:09: ioport range 0x40b-0x40b has been reserved
>system 00:09: ioport range 0x4d6-0x4d6 has been reserved
>system 00:09: ioport range 0xc00-0xc01 has been reserved
>system 00:09: ioport range 0xc14-0xc14 has been reserved
>system 00:09: ioport range 0xc50-0xc51 has been reserved
>system 00:09: ioport range 0xc52-0xc52 has been reserved
>system 00:09: ioport range 0xc6c-0xc6c has been reserved
>system 00:09: ioport range 0xc6f-0xc6f has been reserved
>system 00:09: ioport range 0xcd0-0xcd1 has been reserved
>system 00:09: ioport range 0xcd2-0xcd3 has been reserved
>system 00:09: ioport range 0xcd4-0xcd5 has been reserved
>system 00:09: ioport range 0xcd6-0xcd7 has been reserved
>system 00:09: ioport range 0xcd8-0xcdf has been reserved
>system 00:09: ioport range 0x800-0x89f has been reserved
>system 00:09: ioport range 0xb10-0xb1f has been reserved
>system 00:09: ioport range 0x900-0x90f has been reserved
>system 00:09: ioport range 0x910-0x91f has been reserved
>system 00:09: ioport range 0xfe00-0xfefe has been reserved
>system 00:09: iomem range 0xffb80000-0xffbfffff has been reserved
>system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
>system 00:0a: ioport range 0xe00-0xe0f has been reserved
>system 00:0a: ioport range 0xe80-0xe8f has been reserved
>system 00:0a: ioport range 0xf40-0xf4f has been reserved
>system 00:0a: ioport range 0xa30-0xa3f has been reserved
>system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0c: iomem range 0x0-0x9ffff could not be reserved
>system 00:0c: iomem range 0xc0000-0xcffff has been reserved
>system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved
>system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved
>PCI: Bridge: 0000:00:02.0
>  IO window: 9000-9fff
>  MEM window: 0xfe700000-0xfe7fffff
>  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
>PCI: Bridge: 0000:00:04.0
>  IO window: a000-bfff
>  MEM window: 0xfe800000-0xfe8fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:06.0
>  IO window: c000-cfff
>  MEM window: 0xfe900000-0xfe9fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:07.0
>  IO window: d000-efff
>  MEM window: 0xfea00000-0xfeafffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:14.4
>  IO window: disabled.
>  MEM window: 0xfeb00000-0xfebfffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 2
>Switched to high resolution mode on CPU 3
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 3103k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1217534810.543:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:06.0:pcie00]
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:07.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: duty_cycle spans bit 4
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI: ACPI0007:02 is registered as cooling_device2
>ACPI: ACPI0007:03 is registered as cooling_device3
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 0:523:145
>  hash matches device device:16
>Freeing unused kernel memory: 348k freed
>Write protecting the kernel read-only data: 1116k
>ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.5: EHCI Host Controller
>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.5: debug port 1
>ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe6ff000
>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25.11-97.fc9.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:13.5
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe6fe000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25.11-97.fc9.x86_64 ohci_hcd
>usb usb2: SerialNumber: 0000:00:13.0
>ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe6fd000
>hub 1-0:1.0: unable to enumerate USB device on port 3
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25.11-97.fc9.x86_64 ohci_hcd
>usb usb3: SerialNumber: 0000:00:13.1
>ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.2: OHCI Host Controller
>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe6fc000
>hub 1-0:1.0: unable to enumerate USB device on port 4
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25.11-97.fc9.x86_64 ohci_hcd
>usb usb4: SerialNumber: 0000:00:13.2
>ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.3: OHCI Host Controller
>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe6fb000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>hub 1-0:1.0: unable to enumerate USB device on port 5
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: OHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25.11-97.fc9.x86_64 ohci_hcd
>usb usb5: SerialNumber: 0000:00:13.3
>ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.4: OHCI Host Controller
>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
>ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe6fa000
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>hub 1-0:1.0: unable to enumerate USB device on port 6
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: OHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25.11-97.fc9.x86_64 ohci_hcd
>usb usb6: SerialNumber: 0000:00:13.4
>USB Universal Host Controller Interface driver v3.0
>xor: automatically using best checksumming function: generic_sse
>   generic_sse: 10380.000 MB/sec
>xor: using function: generic_sse (10380.000 MB/sec)
>async_tx: api initialized (async)
>raid6: int64x1   2398 MB/s
>raid6: int64x2   3187 MB/s
>raid6: int64x4   2308 MB/s
>raid6: int64x8   2355 MB/s
>raid6: sse2x1    3574 MB/s
>raid6: sse2x2    5859 MB/s
>raid6: sse2x4    7195 MB/s
>raid6: using algorithm sse2x4 (7195 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ahci 0000:00:12.0: version 3.0
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
>ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
>ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP
>usb 3-1: new full speed USB device using ohci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>usb 3-1: New USB device found, idVendor=22b8, idProduct=0850
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 3-1: Product: BCM92035DGROM
>usb 3-1: Manufacturer: Broadcom
>usb 3-1: SerialNumber: 000C553576FA
>usb 3-2: new low speed USB device using ohci_hcd and address 3
>usb 3-2: configuration #1 chosen from 1 choice
>hiddev96hidraw0: USB HID v1.10 Device [APC Back-UPS ES 725 FW:802.n2.D USB FW:n2] on usb-0000:00:13.1-2
>usb 3-2: New USB device found, idVendor=051d, idProduct=0002
>usb 3-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
>usb 3-2: Product: Back-UPS ES 725 FW:802.n2.D USB FW:n2
>usb 3-2: Manufacturer: APC
>usb 3-2: SerialNumber: 3B0526X10333  
>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:12.0: flags: ncq sntf ilck led clo pio 
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xfe6ff800 port 0xfe6ff900 irq 22
>ata2: SATA max UDMA/133 abar m1024@0xfe6ff800 port 0xfe6ff980 irq 22
>ata3: SATA max UDMA/133 abar m1024@0xfe6ff800 port 0xfe6ffa00 irq 22
>ata4: SATA max UDMA/133 abar m1024@0xfe6ff800 port 0xfe6ffa80 irq 22
>usb 4-1: new full speed USB device using ohci_hcd and address 2
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: WDC WD6400AAKS-00A7B0, 01.03B01, max UDMA/133
>ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata1.00: configured for UDMA/133
>usb 4-1: configuration #1 chosen from 1 choice
>hub 4-1:1.0: USB hub found
>hub 4-1:1.0: 4 ports detected
>usb 4-1: New USB device found, idVendor=0451, idProduct=1446
>usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 4-2: new low speed USB device using ohci_hcd and address 3
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-8: WDC WD6400AAKS-75A7B0, 01.03B01, max UDMA/133
>ata2.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata2.00: configured for UDMA/133
>usb 4-2: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft IntelliMouse® Explorer as /devices/pci0000:00/0000:00:13.2/usb4/4-2/4-2:1.0/input/input1
>input,hidraw1: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:13.2-2
>usb 4-2: New USB device found, idVendor=045e, idProduct=001e
>usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-2: Product: Microsoft IntelliMouse® Explorer
>usb 4-2: Manufacturer: Microsoft
>usb 4-1.1: new low speed USB device using ohci_hcd and address 4
>usb 4-1.1: configuration #1 chosen from 1 choice
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-8: WDC WD6400AAKS-75A7B0, 01.03B01, max UDMA/133
>ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata3.00: configured for UDMA/133
>input: Microsoft Natural Keyboard Pro as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1.1/4-1.1:1.0/input/input2
>input,hidraw2: USB HID v1.10 Keyboard [Microsoft Natural Keyboard Pro] on usb-0000:00:13.2-1.1
>input: Microsoft Natural Keyboard Pro as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1.1/4-1.1:1.1/input/input3
>input,hidraw3: USB HID v1.10 Device [Microsoft Natural Keyboard Pro] on usb-0000:00:13.2-1.1
>usb 4-1.1: New USB device found, idVendor=045e, idProduct=001d
>usb 4-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 4-1.1: Product: Microsoft Natural Keyboard Pro
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: ATA-8: WDC WD6400AAKS-75A7B0, 01.03B01, max UDMA/133
>ata4.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata4.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-0 01.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-7 01.0 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 1250263728 512-byte hardware sectors (640135 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 1250263728 512-byte hardware sectors (640135 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >
>sd 1:0:0:0: [sdb] Attached SCSI disk
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-7 01.0 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdc] 1250263728 512-byte hardware sectors (640135 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdc] 1250263728 512-byte hardware sectors (640135 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 >
>sd 2:0:0:0: [sdc] Attached SCSI disk
>scsi 3:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-7 01.0 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdd] 1250263728 512-byte hardware sectors (640135 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdd] 1250263728 512-byte hardware sectors (640135 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1 sdd2 sdd3 sdd4 < sdd5 sdd6 sdd7 >
>sd 3:0:0:0: [sdd] Attached SCSI disk
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>ahci 0000:02:00.0: controller can't do NCQ, turning off CAP_NCQ
>ahci 0000:02:00.0: MV_AHCI HACK: port_map 7 -> 3
>ahci 0000:02:00.0: AHCI 0001.0000 32 slots 3 ports 3 Gbps 0x3 impl IDE mode
>ahci 0000:02:00.0: flags: 64bit stag led pmp slum part 
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>scsi4 : ahci
>scsi5 : ahci
>scsi6 : ahci
>ata5: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 16
>ata6: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 16
>ata7: DUMMY
>ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata5.00: ATAPI: HL-DT-ST DVDRAM GH20LS10, FL00, max UDMA/100
>ata5.00: configured for UDMA/100
>ata6: SATA link down (SStatus 0 SControl 300)
>scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH20LS10  FL00 PQ: 0 ANSI: 5
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:04:00.0: controller can't do NCQ, turning off CAP_NCQ
>ahci 0000:04:00.0: MV_AHCI HACK: port_map 7 -> 3
>ahci 0000:04:00.0: AHCI 0001.0000 32 slots 3 ports 3 Gbps 0x3 impl IDE mode
>ahci 0000:04:00.0: flags: 64bit stag led pmp slum part 
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>scsi7 : ahci
>scsi8 : ahci
>scsi9 : ahci
>ata8: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd00 irq 19
>ata9: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd80 irq 19
>ata10: DUMMY
>ata8: SATA link down (SStatus 0 SControl 300)
>ata9: SATA link down (SStatus 0 SControl 300)
>md: md1 stopped.
>md: bind<sdb5>
>md: bind<sdc5>
>md: bind<sdd5>
>md: bind<sda5>
>raid5: device sda5 operational as raid disk 0
>raid5: device sdd5 operational as raid disk 3
>raid5: device sdc5 operational as raid disk 2
>raid5: device sdb5 operational as raid disk 1
>raid5: allocated 4274kB for md1
>raid5: raid level 5 set md1 active with 4 out of 4 devices, algorithm 2
>RAID5 conf printout:
> --- rd:4 wd:4
> disk 0, o:1, dev:sda5
> disk 1, o:1, dev:sdb5
> disk 2, o:1, dev:sdc5
> disk 3, o:1, dev:sdd5
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:8192 avtab hash slots allocated. Num of rules:170925
>SELinux:8192 avtab hash slots allocated. Num of rules:170925
>security:  8 users, 12 roles, 2350 types, 115 bools, 1 sens, 1024 cats
>security:  72 classes, 170925 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev md1, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1217534823.630:2): policy loaded auid=4294967295 ses=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>scsi 4:0:0:0: Attached scsi generic sg4 type 5
>Driver 'sr' needs updating - please use bus_type methods
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>sky2 0000:03:00.0: v1.21 addr 0xfe9fc000 irq 18 Yukon-EC Ultra (0xb4) rev 3
>sky2 eth0: addr 00:1f:c6:1d:69:9e
>ACPI: Power Button (CM) [PWRB]
>ACPI: WMI: Mapper loaded
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:14.1 to 64
>scsi10 : pata_atiixp
>scsi11 : pata_atiixp
>ata11: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
>ata12: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
>md: bind<sdb1>
>md: bind<sdb2>
>md: bind<sdc7>
>input: PC Speaker as /devices/platform/pcspkr/input/input6
>md: bind<sdb3>
>md: bind<sda2>
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>md: bind<sdb7>
>piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
>ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401
>md: bind<sdd3>
>ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x1
>md: bind<sdc1>
>hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:2857: autoconfig: line_outs=4 (0x12/0x16/0x24/0x25/0x0)
>ALSA sound/pci/hda/hda_codec.c:2861:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2865:    hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2866:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:2874:    inputs: mic=0x17, fmic=0x14, line=0x15, fline=0x0, cd=0x18, aux=0x0
>md: bind<sdc3>
>md: bind<sda7>
>md: bind<sda3>
>md: bind<sdc2>
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Switch, skipped
>ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 22 (level, low) -> IRQ 22
>firewire_ohci: Added fw-ohci device 0000:05:08.0, OHCI version 1.0
>ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:01:00.1 to 64
>ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x1001
>ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x1
>raid5: device sda3 operational as raid disk 0
>raid5: device sdc3 operational as raid disk 2
>raid5: device sdd3 operational as raid disk 3
>raid5: device sdb3 operational as raid disk 1
>raid5: allocated 4274kB for md2
>raid5: raid level 5 set md2 active with 4 out of 4 devices, algorithm 2
>RAID5 conf printout:
> --- rd:4 wd:4
> disk 0, o:1, dev:sda3
> disk 1, o:1, dev:sdb3
> disk 2, o:1, dev:sdc3
> disk 3, o:1, dev:sdd3
>md: bind<sdd1>
>md: bind<sdd7>
>md: bind<sdd2>
>raid5: device sdd7 operational as raid disk 3
>raid5: device sda7 operational as raid disk 0
>raid5: device sdb7 operational as raid disk 1
>raid5: device sdc7 operational as raid disk 2
>raid5: allocated 4274kB for md4
>raid5: raid level 5 set md4 active with 4 out of 4 devices, algorithm 2
>RAID5 conf printout:
> --- rd:4 wd:4
> disk 0, o:1, dev:sda7
> disk 1, o:1, dev:sdb7
> disk 2, o:1, dev:sdc7
> disk 3, o:1, dev:sdd7
>raid5: device sdd2 operational as raid disk 3
>raid5: device sdc2 operational as raid disk 2
>raid5: device sda2 operational as raid disk 0
>raid5: device sdb2 operational as raid disk 1
>raid5: allocated 4274kB for md3
>raid5: raid level 5 set md3 active with 4 out of 4 devices, algorithm 2
>RAID5 conf printout:
> --- rd:4 wd:4
> disk 0, o:1, dev:sda2
> disk 1, o:1, dev:sdb2
> disk 2, o:1, dev:sdc2
> disk 3, o:1, dev:sdd2
>md: bind<sda1>
>md: raid1 personality registered for level 1
>raid1: raid set md0 active with 4 out of 4 mirrors
>firewire_core: created device fw0: GUID 001e8c00011991c4, S400
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on md1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev md4, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev md3, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev md2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev md0, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 522072k swap on /dev/sdd6.  Priority:-1 extents:1 across:522072k
>Adding 522072k swap on /dev/sdc6.  Priority:-2 extents:1 across:522072k
>Adding 522072k swap on /dev/sdb6.  Priority:-3 extents:1 across:522072k
>Adding 522072k swap on /dev/sda6.  Priority:-4 extents:1 across:522072k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>powernow-k8: Found 1 AMD Phenom(tm) 9850 Quad-Core Processor processors (4 cpu cores) (version 2.20.00)
>powernow-k8: MP systems not supported by PSB BIOS structure
>powernow-k8: MP systems not supported by PSB BIOS structure
>powernow-k8: MP systems not supported by PSB BIOS structure
>powernow-k8: MP systems not supported by PSB BIOS structure
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure.
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>it87: Found IT8716F chip at 0xe80, revision 3
>it87: in3 is VCC (+5V)
>hwmon-vid: Unknown VRM version of your x86 CPU
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: BNEP (Ethernet Emulation) ver 1.2
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>sky2 eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>hda-intel: Invalid position buffer, using LPIB read method instead.
>sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts

Actions: View

Attachments on bug 457482: 313133 | 313134 | 313135