Attachment 313488 Details for Bug 457971 – full dmesg for 2.6.27-0.215.rc1.git4.fc10.x86_64 showing the crash in question

full dmesg for 2.6.27-0.215.rc1.git4.fc10.x86_64 showing the crash in question

dmesg.2.6.27-0.215.rc1.git4.fc10.x86_64 (text/plain), 41.49 KB, created by Michal Jaegermann on 2008-08-05 20:29:03 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Michal Jaegermann

Created: 2008-08-05 20:29:03 UTC

Size: 41.49 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27-0.215.rc1.git4.fc10.x86_64 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.3.1 20080801 (Red Hat 4.3.1-6) (GCC) ) #1 SMP Mon Aug 4 00:38:41 EDT 2008
>Command line: ro root=LABEL=/1 selinux=0 3
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ff30000 (usable)
> BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data)
> BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS)
> BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>last_pfn = 0x1ff30 max_arch_pfn = 0x3ffffffff
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>init_memory_mapping
> 0000000000 - 001fe00000 page 2M
> 001fe00000 - 001ff30000 page 4k
>kernel direct mapping tables up to 1ff30000 @ 8000-b000
>last_map_addr: 1ff30000 end: 1ff30000
>RAMDISK: 1fc47000 - 1ff1fd00
>DMI 2.3 present.
>ACPI: RSDP 000FA870, 0021 (r2 ACPIAM)
>ACPI: XSDT 1FF30100, 003C (r1 A M I  OEMXSDT   9000323 MSFT       97)
>ACPI: FACP 1FF30290, 00F4 (r3 A M I  OEMFACP   9000323 MSFT       97)
>ACPI: DSDT 1FF303E0, 35D8 (r1  SK8V_ SK8V_013       13 MSFT  100000D)
>ACPI: FACS 1FF40000, 0040
>ACPI: APIC 1FF30390, 004A (r1 A M I  OEMAPIC   9000323 MSFT       97)
>ACPI: OEMB 1FF40040, 003F (r1 A M I  OEMBIOS   9000323 MSFT       97)
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-000000001ff30000
>Bootmem setup node 0 0000000000000000-000000001ff30000
>  NODE_DATA [0000000000009000 - 000000000001dfff]
>  bootmap [000000000001e000 -  0000000000021fe7] pages 4
>(6 early reservations) ==> bootmem [0000000000 - 001ff30000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 0000ed8688]    TEXT DATA BSS ==> [0000200000 - 0000ed8688]
>  #3 [001fc47000 - 001ff1fd00]          RAMDISK ==> [001fc47000 - 001ff1fd00]
>  #4 [000009c400 - 0000100000]    BIOS reserved ==> [000009c400 - 0000100000]
>  #5 [0000008000 - 0000009000]          PGTABLE ==> [0000008000 - 0000009000]
>Scan SMP from ffff880000000000 for 1024 bytes.
>Scan SMP from ffff88000009fc00 for 1024 bytes.
>Scan SMP from ffff8800000f0000 for 65536 bytes.
>found SMP MP-table at [ffff8800000ff780] 000ff780
> [ffffe20000000000-ffffe20000bfffff] PMD -> [ffff880001200000-ffff880001dfffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0001ff30
>On node 0 totalpages: 130767
>  DMA zone: 510 pages, LIFO batch:0
>  DMA32 zone: 123796 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
>PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
>Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
>PERCPU: Allocating 450624 bytes of per cpu data
>NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 124306
>Policy zone: DMA32
>Kernel command line: ro root=LABEL=/1 selinux=0 3
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 16384 bytes)
>Extended CMOS year: 2000
>TSC calibrated against PM_TIMER
>Detected 1600.058 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1840 kB
> per task-struct memory footprint: 3456 bytes
>Checking aperture...
>AGP bridge at 00:00:00
>Aperture from AGP @ e0000000 old size 32 MB
>Aperture from AGP @ e0000000 size 256 MB (APSIZE f00)
>Node 0: aperture @ e0000000 size 256 MB
>Memory: 493984k/523456k available (3152k kernel code, 29084k reserved, 1810k data, 1596k init)
>CPA: page pool initialized 16 of 16 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.11 BogoMIPS (lpj=1600058)
>Security Framework initialized
>SELinux:  Disabled at boot.
>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0/0 -> Node 0
>tseg: 0000000000
>SMP alternatives: switching to UP code
>debug: unmapping init memory ffffffff81523000..ffffffff81529000
>ACPI: Core revision 20080609
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
>CPU0: AMD Opteron(tm) Processor 142 stepping 01
>Using local APIC timer interrupts.
>APIC timer calibration result 12500530
>Detected 12.500 MHz APIC timer.
>Brought up 1 CPUs
>Total of 1 processors activated (3200.11 BogoMIPS).
>sizeof(vma)=176 bytes
>sizeof(page)=96 bytes
>sizeof(inode)=1088 bytes
>sizeof(dentry)=256 bytes
>sizeof(ext3inode)=1488 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=9544 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0 level CPU
>  groups: 0
>khelper used greatest stack depth: 5728 bytes left
>net_namespace: 1680 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 19:54:30  Date: 08/05/08
>NET: Registered protocol family 16
>No dock devices found.
>node 0 link 0: io port [1000, ffffff]
>TOM: 0000000020000000 aka 512M
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [20000000, fe0bffff]
>bus: [00,ff] on node 0 link 0
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [a0000, bffff]
>bus: 00 index 2 mmio: [20000000, fcffffffff]
>ACPI: bus type pci registered
>PCI: Using configuration type 1 for base access
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:01.0: supports D1
>pci 0000:00:07.0: supports D2
>pci 0000:00:07.0: PME# supported from D2 D3hot D3cold
>pci 0000:00:07.0: PME# disabled
>pci 0000:00:08.0: supports D1
>pci 0000:00:0a.0: supports D1
>pci 0000:00:0a.0: supports D2
>pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0a.0: PME# disabled
>pci 0000:00:0e.0: supports D1
>pci 0000:00:0e.0: supports D2
>pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0e.0: PME# disabled
>pci 0000:00:10.0: supports D1
>pci 0000:00:10.0: supports D2
>pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:10.0: PME# disabled
>pci 0000:00:10.1: supports D1
>pci 0000:00:10.1: supports D2
>pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:10.1: PME# disabled
>pci 0000:00:10.2: supports D1
>pci 0000:00:10.2: supports D2
>pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:10.2: PME# disabled
>pci 0000:00:10.3: supports D1
>pci 0000:00:10.3: supports D2
>pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:10.3: PME# disabled
>pci 0000:00:10.4: supports D1
>pci 0000:00:10.4: supports D2
>pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:10.4: PME# disabled
>HPET not enabled in BIOS. You might try hpet=force boot option
>pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
>pci 0000:00:11.5: supports D1
>pci 0000:00:11.5: supports D2
>pci 0000:01:00.0: supports D1
>pci 0000:01:00.0: supports D2
>pci 0000:01:00.1: supports D1
>pci 0000:01:00.1: supports D2
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:0a: io resource (0x10-0x1f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:0a: io resource (0x22-0x3f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:0a: io resource (0x44-0x5f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:0a: io resource (0x62-0x63) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:0a: io resource (0x65-0x6f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:0a: io resource (0x72-0x7f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:0a: io resource (0x80-0x80) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:0a: io resource (0x84-0x86) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:0a: io resource (0x88-0x88) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:0a: io resource (0x8c-0x8e) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:0a: io resource (0x90-0x9f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:0a: io resource (0xa2-0xbf) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp 00:0a: io resource (0xe0-0xef) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>pci 0000:00:00.0: BAR 0: can't allocate resource
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>agpgart: Detected AGP bridge 0
>agpgart: AGP aperture is 256M @ 0xe0000000
>tracer: 1286 pages allocated for 65536 entries of 80 bytes
>   actual entries 65586
>ACPI: RTC can wake from S4
>system 00:0a: ioport range 0x295-0x296 has been reserved
>system 00:0a: ioport range 0x3e1-0x3e7 has been reserved
>system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
>system 00:0a: ioport range 0x800-0x87f has been reserved
>system 00:0a: ioport range 0x400-0x41f has been reserved
>system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:0b: iomem range 0xfff80000-0xffffffff could not be reserved
>system 00:0e: iomem range 0x0-0x9ffff could not be reserved
>system 00:0e: iomem range 0xc0000-0xdffff has been reserved
>system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0e: iomem range 0x100000-0x1ffeffff could not be reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: 0x9000-0x9fff
>pci 0000:00:01.0:   MEM window: 0xfc900000-0xfcefffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000cff00000-0x000000dfefffff
>pci 0000:00:01.0: setting latency timer to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
>TCP established hash table entries: 16384 (order: 6, 262144 bytes)
>TCP bind hash table entries: 16384 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>debug: unmapping init memory ffff88001fc47000..ffff88001ff20000
>audit: initializing netlink socket (disabled)
>type=2000 audit(1217966071.502:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 964
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: VIA PCI bridge detected.Disabling DAC.
>pci 0000:00:0e.0: Firmware left e100 interrupts enabled; disabling
>pci 0000:00:10.0: uhci_check_and_reset_hc: legsup = 0x8030
>pci 0000:00:10.0: Performing full reset
>pci 0000:00:10.1: uhci_check_and_reset_hc: legsup = 0x8030
>pci 0000:00:10.1: Performing full reset
>pci 0000:00:10.2: uhci_check_and_reset_hc: legsup = 0x8030
>pci 0000:00:10.2: Performing full reset
>pci 0000:00:10.3: uhci_check_and_reset_hc: legsup = 0x8030
>pci 0000:00:10.3: Performing full reset
>pci 0000:01:00.0: Boot video device
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: processor limited to max C-state 1
>processor ACPI0007:00: registered as cooling_device0
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input3
>Driver 'sd' needs updating - please use bus_type methods
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 4:294:950
>tty tty7: hash matches
>debug: unmapping init memory ffffffff81529000..ffffffff816b8000
>Write protecting the kernel read-only data: 1420k
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>plymouthd used greatest stack depth: 4736 bytes left
>modprobe used greatest stack depth: 4496 bytes left
>ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
>ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>drivers/usb/core/inode.c: creating file 'devices'
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:10.4: reset hcs_params 0x4208 dbg=0 cc=4 pcc=2 ordered !ppc ports=8
>ehci_hcd 0000:00:10.4: reset hcc_params 6872 thresh 7 uframes 256/512/1024
>ehci_hcd 0000:00:10.4: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:10.4: MWI active
>ehci_hcd 0000:00:10.4: supports USB remote wakeup
>ehci_hcd 0000:00:10.4: irq 21, io mem 0xfdf00000
>ehci_hcd 0000:00:10.4: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:10.4: init command 010009 (park)=0 ithresh=1 period=256 RUN
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: default language 0x0409
>usb usb1: uevent
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>usb 1-0:1.0: uevent
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27-0.215.rc1.git4.fc10.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:10.4
>modprobe used greatest stack depth: 3944 bytes left
>hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd: block sizes: ed 80 td 96
>USB Universal Host Controller Interface driver v3.0
>uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '002'
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.0: detected 2 ports
>uhci_hcd 0000:00:10.0: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:10.0: Performing full reset
>uhci_hcd 0000:00:10.0: supports USB remote wakeup
>uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b400
>usb usb2: default language 0x0409
>usb usb2: uevent
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>usb 2-0:1.0: uevent
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: individual port over-current protection
>hub 2-0:1.0: power on to power good time: 2ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input5
>uhci_hcd 0000:00:10.0: port 1 portsc 018a,00
>uhci_hcd 0000:00:10.0: port 2 portsc 018a,00
>hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
>drivers/usb/core/inode.c: creating file '001'
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27-0.215.rc1.git4.fc10.x86_64 uhci_hcd
>usb usb2: SerialNumber: 0000:00:10.0
>uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '003'
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.1: detected 2 ports
>uhci_hcd 0000:00:10.1: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:10.1: Performing full reset
>uhci_hcd 0000:00:10.1: supports USB remote wakeup
>uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b800
>usb usb3: default language 0x0409
>usb usb3: uevent
>usb usb3: usb_probe_device
>usb usb3: configuration #1 chosen from 1 choice
>usb usb3: adding 3-0:1.0 (config #1, interface 0)
>usb 3-0:1.0: uevent
>hub 3-0:1.0: usb_probe_interface
>hub 3-0:1.0: usb_probe_interface - got id
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hub 3-0:1.0: standalone hub
>hub 3-0:1.0: no power switching (usb 1.0)
>hub 3-0:1.0: individual port over-current protection
>hub 3-0:1.0: power on to power good time: 2ms
>hub 3-0:1.0: local power source is good
>hub 3-0:1.0: trying to enable port power on non-switchable hub
>uhci_hcd 0000:00:10.1: port 1 portsc 008a,00
>uhci_hcd 0000:00:10.1: port 2 portsc 018a,00
>hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
>drivers/usb/core/inode.c: creating file '001'
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.27-0.215.rc1.git4.fc10.x86_64 uhci_hcd
>usb usb3: SerialNumber: 0000:00:10.1
>uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '004'
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.2: detected 2 ports
>uhci_hcd 0000:00:10.2: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:10.2: Performing full reset
>uhci_hcd 0000:00:10.2: supports USB remote wakeup
>uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c000
>usb usb4: default language 0x0409
>usb usb4: uevent
>usb usb4: usb_probe_device
>usb usb4: configuration #1 chosen from 1 choice
>usb usb4: adding 4-0:1.0 (config #1, interface 0)
>usb 4-0:1.0: uevent
>hub 4-0:1.0: usb_probe_interface
>hub 4-0:1.0: usb_probe_interface - got id
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hub 4-0:1.0: standalone hub
>hub 4-0:1.0: no power switching (usb 1.0)
>hub 4-0:1.0: individual port over-current protection
>hub 4-0:1.0: power on to power good time: 2ms
>hub 4-0:1.0: local power source is good
>hub 4-0:1.0: trying to enable port power on non-switchable hub
>uhci_hcd 0000:00:10.2: port 1 portsc 008a,00
>uhci_hcd 0000:00:10.2: port 2 portsc 008a,00
>hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
>drivers/usb/core/inode.c: creating file '001'
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.27-0.215.rc1.git4.fc10.x86_64 uhci_hcd
>usb usb4: SerialNumber: 0000:00:10.2
>uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '005'
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:10.3: detected 2 ports
>uhci_hcd 0000:00:10.3: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:10.3: Performing full reset
>uhci_hcd 0000:00:10.3: supports USB remote wakeup
>uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c400
>usb usb5: default language 0x0409
>usb usb5: uevent
>usb usb5: usb_probe_device
>usb usb5: configuration #1 chosen from 1 choice
>usb usb5: adding 5-0:1.0 (config #1, interface 0)
>usb 5-0:1.0: uevent
>hub 5-0:1.0: usb_probe_interface
>hub 5-0:1.0: usb_probe_interface - got id
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>hub 5-0:1.0: standalone hub
>hub 5-0:1.0: no power switching (usb 1.0)
>hub 5-0:1.0: individual port over-current protection
>hub 5-0:1.0: power on to power good time: 2ms
>hub 5-0:1.0: local power source is good
>hub 5-0:1.0: trying to enable port power on non-switchable hub
>uhci_hcd 0000:00:10.3: port 1 portsc 018a,00
>uhci_hcd 0000:00:10.3: port 2 portsc 018a,00
>hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
>drivers/usb/core/inode.c: creating file '001'
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.27-0.215.rc1.git4.fc10.x86_64 uhci_hcd
>usb usb5: SerialNumber: 0000:00:10.3
>modprobe used greatest stack depth: 3576 bytes left
>sata_via 0000:00:0f.0: version 2.3
>sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
>sata_via 0000:00:0f.0: routed to hard irq line 5
>scsi0 : sata_via
>scsi1 : sata_via
>ata1: SATA max UDMA/133 cmd 0xe800 ctl 0xe400 bmdma 0xd400 irq 20
>ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xd800 bmdma 0xd408 irq 20
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-6: WDC WD800JD-00HKA0, 13.03G13, max UDMA/133
>ata1.00: 156301488 sectors, multi 16: LBA 
>ata1.00: configured for UDMA/133
>usb usb2: suspend_rh (auto-stop)
>ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>isa bounce pool size: 16 pages
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD800JD-00HK 13.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14<7>usb usb3: suspend_rh (auto-stop)
> sda15 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>modprobe used greatest stack depth: 2640 bytes left
>usb usb4: suspend_rh (auto-stop)
>usb usb5: suspend_rh (auto-stop)
>hub 1-0:1.0: hub_suspend
>usb usb1: bus auto-suspend
>ehci_hcd 0000:00:10.4: suspend root hub
>hub 2-0:1.0: hub_suspend
>usb usb2: bus auto-suspend
>usb usb2: suspend_rh
>hub 3-0:1.0: hub_suspend
>usb usb3: bus auto-suspend
>usb usb3: suspend_rh
>hub 4-0:1.0: hub_suspend
>usb usb4: bus auto-suspend
>usb usb4: suspend_rh
>hub 5-0:1.0: hub_suspend
>usb usb5: bus auto-suspend
>usb usb5: suspend_rh
>sata_promise 0000:00:08.0: version 2.12
>sata_promise 0000:00:08.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>scsi2 : sata_promise
>scsi3 : sata_promise
>scsi4 : sata_promise
>ata3: SATA max UDMA/133 mmio m4096@0xfda00000 ata 0xfda00200 irq 18
>ata4: SATA max UDMA/133 mmio m4096@0xfda00000 ata 0xfda00280 irq 18
>ata5: PATA max UDMA/133 mmio m4096@0xfda00000 ata 0xfda00300 irq 18
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATA-6: WDC WD2500JD-00GBB0, 02.05D02, max UDMA/100
>ata3.00: 488397168 sectors, multi 0: LBA48 
>ata3.00: applying bridge limits
>ata3.00: configured for UDMA/100
>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata4.00: ATA-6: WDC WD2500JD-00GBB0, 02.05D02, max UDMA/100
>ata4.00: 488397168 sectors, multi 0: LBA48 
>ata4.00: applying bridge limits
>ata4.00: configured for UDMA/100
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD2500JD-00G 02.0 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4
>sd 2:0:0:0: [sdb] Attached SCSI disk
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>scsi 3:0:0:0: Direct-Access     ATA      WDC WD2500JD-00G 02.0 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 >
>sd 3:0:0:0: [sdc] Attached SCSI disk
>sd 3:0:0:0: Attached scsi generic sg2 type 0
>modprobe used greatest stack depth: 2168 bytes left
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>usb usb2: uevent
>usb 2-0:1.0: uevent
>usb usb3: uevent
>usb 3-0:1.0: uevent
>usb usb4: uevent
>usb 4-0:1.0: uevent
>usb usb5: uevent
>usb 5-0:1.0: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>parport_pc 00:08: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>firewire_ohci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>firewire_ohci: Added fw-ohci device 0000:00:07.0, OHCI version 1.0
>skge 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>skge 0000:00:0a.0: PCI: Disallowing DAC for device
>skge 1.13 addr 0xfdb00000 irq 17 chip Yukon rev 1
>skge eth0: addr 00:0e:a6:4a:bf:fa
>firewire_core: created device fw0: GUID 00e0180000575a14, S400
>e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>e100 0000:00:0e.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>e100: 0000:00:0e.0: e100_probe: Error clearing wake event
>e100: eth1: e100_probe: addr 0xfde00000, irq 19, MAC addr 00:02:b3:a3:60:e4
>pata_via 0000:00:0f.1: version 0.3.3
>pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>scsi5 : pata_via
>scsi6 : pata_via
>ata6: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
>ata7: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
>ata7.00: ATAPI: _NEC DVD_RW ND-3550A, 1.05, max UDMA/33
>ata7.00: configured for UDMA/33
>scsi 6:0:0:0: CD-ROM            _NEC     DVD_RW ND-3550A  1.05 PQ: 0 ANSI: 5
>scsi 6:0:0:0: Attached scsi generic sg3 type 5
>input: PC Speaker as /devices/platform/pcspkr/input/input6
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
>ALSA sound/pci/via82xx.c:580: codec_read: codec 0 is not valid [0xfe0000]
>ALSA sound/pci/via82xx.c:580: codec_read: codec 0 is not valid [0xfe0000]
>ALSA sound/pci/via82xx.c:580: codec_read: codec 0 is not valid [0xfe0000]
>ALSA sound/pci/via82xx.c:580: codec_read: codec 0 is not valid [0xfe0000]
>VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001)
>VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>ppdev: user-space parallel port driver
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 6:0:0:0: Attached scsi CD-ROM sr0
>VIA 82xx Modem 0000:00:11.6: setting latency timer to 64
>VIA 82xx Modem 0000:00:11.6: PCI INT C disabled
>VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>EXT3 FS on sda11, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda14, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda13, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda12, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1052216k swap on /dev/sda5.  Priority:-1 extents:1 across:1052216k
>powernow-k8: Power state transitions not supported
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>e100: eth1: e100_watchdog: link up, 10Mbps, half-duplex
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>w83627hf: Found W83697HF chip at 0x290
>eth1: no IPv6 routers present
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[drm] Initialized radeon 1.29.0 20080528 on minor 0
>[drm] Setting GART location based on new memory map
>BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
>IP: [<ffffffffa0309aa2>] drm_ati_pcigart_init+0x1be/0x210 [drm]
>PGD 1e584067 PUD 19901067 PMD 19900067 PTE 0
>Oops: 0002 [1] SMP DEBUG_PAGEALLOC
>CPU 0 
>Modules linked in: radeon drm i2c_algo_bit autofs4 w83627hf hwmon_vid eeprom sunrpc ipv6 ipt_REJECT xt_tcpudp xt_state iptable_filter ipt_LOG iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack ip_tables x_tables ext2 dm_mirror dm_log dm_mod sr_mod cdrom ppdev snd_via82xx_modem snd_via82xx gameport snd_mpu401 snd_ac97_codec ac97_bus snd_seq_dummy floppy snd_seq_oss snd_seq_midi_event snd_seq pcspkr snd_pcm_oss snd_mixer_oss snd_pcm k8temp snd_mpu401_uart hwmon snd_rawmidi snd_timer snd_seq_device snd_page_alloc snd i2c_viapro i2c_core soundcore pata_acpi pata_via ata_generic e100 mii skge firewire_ohci firewire_core crc_itu_t parport_pc parport shpchp sata_promise sata_via ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: freq_table]
>Pid: 2659, comm: X Not tainted 2.6.27-0.215.rc1.git4.fc10.x86_64 #1
>RIP: 0010:[<ffffffffa0309aa2>]  [<ffffffffa0309aa2>] drm_ati_pcigart_init+0x1be/0x210 [drm]
>RSP: 0018:ffff88001e581db8  EFLAGS: 00010293
>RAX: 00000000189dc000 RBX: 0000000000000000 RCX: 0000000000000001
>RDX: 00000000189dc000 RSI: 00000000189dc000 RDI: ffff88001fbfb240
>RBP: ffff88001e581e08 R08: ffff88001e581af8 R09: ffff880018a9a000
>R10: 0000000000000046 R11: ffff880000009880 R12: ffff88001f9ce608
>R13: 0000000000000000 R14: ffff88001ddecdd0 R15: 0000000000000000
>FS:  00007fdb0f6df780(0000) GS:ffffffff814f7380(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>CR2: 0000000000000000 CR3: 000000001e10c000 CR4: 00000000000006e0
>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>Process X (pid: 2659, threadinfo ffff88001e580000, task ffff88001898a590)
>Stack:  ffff88001e581e08 ffff880018a9a000 ffff880018ac0000 0000000000000000
> 0000000000002000 ffff88001f9ce1b0 ffff880018a9a000 ffff88001a8c8640
> ffff880018885d68 ffff880018a9a000 ffff88001e581e48 ffffffffa033568e
>Call Trace:
> [<ffffffffa033568e>] radeon_cp_init+0x927/0x9a1 [radeon]
> [<ffffffffa0302e26>] drm_ioctl+0x1e4/0x26f [drm]
> [<ffffffff8116ca31>] ? _raw_spin_lock+0x68/0x116
> [<ffffffffa0334d67>] ? radeon_cp_init+0x0/0x9a1 [radeon]
> [<ffffffff810db014>] vfs_ioctl+0x64/0x7d
> [<ffffffff810db289>] do_vfs_ioctl+0x25c/0x279
> [<ffffffff8130c504>] ? trace_hardirqs_on_thunk+0x3a/0x3f
> [<ffffffff810db300>] sys_ioctl+0x5a/0x7e
> [<ffffffff8101034a>] system_call_fastpath+0x16/0x1b
>
>
>Code: e8 48 fd ff ff 31 db eb 3f 48 c1 e8 20 83 ca 0c 25 ff 00 00 00 c1 e0 04 09 c2 eb 0f 48 c1 e8 20 c1 ea 08 c1 e0 18 09 c2 83 ca 0c <41> 89 54 9d 00 48 ff c3 48 3b 5d d0 0f 82 0d ff ff ff 0f 09 66 
>RIP  [<ffffffffa0309aa2>] drm_ati_pcigart_init+0x1be/0x210 [drm]
> RSP <ffff88001e581db8>
>CR2: 0000000000000000
>---[ end trace a3f86217b3d3084b ]---
>=============================================================================
>BUG kmalloc-32 (Tainted: G      D  ): Padding overwritten. 0xffff880015ac1fd8-0xffff880015ac1fff
>-----------------------------------------------------------------------------
>
>INFO: Slab 0xffffe20000820860 objects=39 used=1 fp=0xffff880015ac1068 flags=0x200000000000c3
>Pid: 2659, comm: X Tainted: G      D   2.6.27-0.215.rc1.git4.fc10.x86_64 #1
>
>Call Trace:
> [<ffffffff810c6964>] slab_err+0xb7/0xc5
> [<ffffffff810c6544>] ? add_partial+0x1f/0x56
> [<ffffffff810c5a2c>] ? compound_order+0x1a/0x2b
> [<ffffffff810c6fc8>] ? check_object+0x17b/0x1b4
> [<ffffffff810c8863>] ? __slab_free+0xbe/0x2b5
> [<ffffffff810c6c30>] slab_pad_check+0xe4/0x13a
> [<ffffffff81163546>] ? kzalloc+0xf/0x11
> [<ffffffff810c6d4a>] check_slab+0xc4/0xd0
> [<ffffffff810c8d38>] __slab_alloc+0x2de/0x3eb
> [<ffffffff81163546>] ? kzalloc+0xf/0x11
> [<ffffffff81163546>] ? kzalloc+0xf/0x11
> [<ffffffff810ca066>] __kmalloc+0xbc/0x111
> [<ffffffff81163546>] kzalloc+0xf/0x11
> [<ffffffff81163d49>] kobject_get_path+0x4b/0xaf
> [<ffffffff811641ca>] kobject_uevent_env+0xcd/0x37b
> [<ffffffff81164483>] kobject_uevent+0xb/0xd
> [<ffffffff811f00c1>] device_del+0x17c/0x1c2
> [<ffffffff811f011d>] device_unregister+0x16/0x22
> [<ffffffff811f0164>] device_destroy+0x3b/0x3f
> [<ffffffff811d400e>] vcs_remove_sysfs+0x28/0x4a
> [<ffffffff811d9802>] con_close+0x5c/0x71
> [<ffffffff811ccd3f>] release_dev+0x219/0x521
> [<ffffffff8106597e>] ? trace_hardirqs_on_caller+0x1f/0x133
> [<ffffffff81065a9f>] ? trace_hardirqs_on+0xd/0xf
> [<ffffffff810df906>] ? d_free+0x53/0x6c
> [<ffffffff810df906>] ? d_free+0x53/0x6c
> [<ffffffff811cd166>] tty_release+0x1e/0x2a
> [<ffffffff810cff1e>] __fput+0xcf/0x173
> [<ffffffff810cffdc>] fput+0x1a/0x1c
> [<ffffffff810cd185>] filp_close+0x6c/0x77
> [<ffffffff8104564d>] put_files_struct+0x79/0xcd
> [<ffffffff810456ed>] exit_files+0x4c/0x54
> [<ffffffff81047072>] do_exit+0x2bb/0x904
> [<ffffffff81010164>] ? mcount_call+0x5/0x31
> [<ffffffff8130db29>] oops_begin+0x0/0x91
> [<ffffffff8130fd30>] do_page_fault+0x9da/0xace
> [<ffffffff81064a83>] ? trace_hardirqs_off_caller+0x21/0xa4
> [<ffffffff81064b13>] ? trace_hardirqs_off+0xd/0xf
> [<ffffffff810644b0>] ? register_lock_class+0x20/0x35a
> [<ffffffff81064b13>] ? trace_hardirqs_off+0xd/0xf
> [<ffffffff8109f9a1>] ? expand+0x8c/0xb5
> [<ffffffff81064a83>] ? trace_hardirqs_off_caller+0x21/0xa4
> [<ffffffff81064b13>] ? trace_hardirqs_off+0xd/0xf
> [<ffffffff8102d4c9>] ? kernel_map_pages+0x122/0x12d
> [<ffffffff810a1f1e>] ? get_page_from_freelist+0x4cb/0x720
> [<ffffffff810a2501>] ? __alloc_pages_internal+0x152/0x4b5
> [<ffffffff8130d15a>] error_exit+0x0/0xc8
> [<ffffffffa0309aa2>] ? drm_ati_pcigart_init+0x1be/0x210 [drm]
> [<ffffffffa0309a3a>] ? drm_ati_pcigart_init+0x156/0x210 [drm]
> [<ffffffffa033568e>] radeon_cp_init+0x927/0x9a1 [radeon]
> [<ffffffffa0302e26>] drm_ioctl+0x1e4/0x26f [drm]
> [<ffffffff8116ca31>] ? _raw_spin_lock+0x68/0x116
> [<ffffffffa0334d67>] ? radeon_cp_init+0x0/0x9a1 [radeon]
> [<ffffffff810db014>] vfs_ioctl+0x64/0x7d
> [<ffffffff810db289>] do_vfs_ioctl+0x25c/0x279
> [<ffffffff8130c504>] ? trace_hardirqs_on_thunk+0x3a/0x3f
> [<ffffffff810db300>] sys_ioctl+0x5a/0x7e
> [<ffffffff8101034a>] system_call_fastpath+0x16/0x1b
>
> Padding 0xffff880015ac1fd8:  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> Padding 0xffff880015ac1fe8:  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> Padding 0xffff880015ac1ff8:  00 00 00 00 00 00 00 00                         ........        
>FIX kmalloc-32: Restoring 0xffff880015ac1000-0xffff880015ac1fff=0x5a
>
>=============================================================================
>BUG kmalloc-32 (Tainted: G      D  ): Redzone overwritten
>-----------------------------------------------------------------------------
>
>INFO: 0xffff880015ac1088-0xffff880015ac108f. First byte 0x5a instead of 0xbb
>INFO: Allocated in 0x5a5a5a5a5a5a5a5a age=11936128522577515149 cpu=1515870810 pid=1515870810
>INFO: Freed in 0x5a5a5a5a5a5a5a5a age=11936128522577515149 cpu=1515870810 pid=1515870810
>INFO: Slab 0xffffe20000820860 objects=39 used=1 fp=0xffff880015ac1068 flags=0x200000000000c3
>INFO: Object 0xffff880015ac1068 @offset=104 fp=0x5a5a5a5a5a5a5a5a
>
>Bytes b4 0xffff880015ac1058:  5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
>  Object 0xffff880015ac1068:  5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
>  Object 0xffff880015ac1078:  5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
> Redzone 0xffff880015ac1088:  5a 5a 5a 5a 5a 5a 5a 5a                         ZZZZZZZZ        
> Padding 0xffff880015ac10c8:  5a 5a 5a 5a 5a 5a 5a 5a                         ZZZZZZZZ        
>Pid: 2659, comm: X Tainted: G      D   2.6.27-0.215.rc1.git4.fc10.x86_64 #1
>
>Call Trace:
> [<ffffffff810c675d>] print_trailer+0x140/0x149
> [<ffffffff810c6e0d>] check_bytes_and_report+0xb7/0xf7
> [<ffffffff81163546>] ? kzalloc+0xf/0x11
> [<ffffffff810c6eae>] check_object+0x61/0x1b4
> [<ffffffff810c8d92>] __slab_alloc+0x338/0x3eb
> [<ffffffff81163546>] ? kzalloc+0xf/0x11
> [<ffffffff81163546>] ? kzalloc+0xf/0x11
> [<ffffffff810ca066>] __kmalloc+0xbc/0x111
> [<ffffffff81163546>] kzalloc+0xf/0x11
> [<ffffffff81163d49>] kobject_get_path+0x4b/0xaf
> [<ffffffff811641ca>] kobject_uevent_env+0xcd/0x37b
> [<ffffffff81164483>] kobject_uevent+0xb/0xd
> [<ffffffff811f00c1>] device_del+0x17c/0x1c2
> [<ffffffff811f011d>] device_unregister+0x16/0x22
> [<ffffffff811f0164>] device_destroy+0x3b/0x3f
> [<ffffffff811d400e>] vcs_remove_sysfs+0x28/0x4a
> [<ffffffff811d9802>] con_close+0x5c/0x71
> [<ffffffff811ccd3f>] release_dev+0x219/0x521
> [<ffffffff8106597e>] ? trace_hardirqs_on_caller+0x1f/0x133
> [<ffffffff81065a9f>] ? trace_hardirqs_on+0xd/0xf
> [<ffffffff810df906>] ? d_free+0x53/0x6c
> [<ffffffff810df906>] ? d_free+0x53/0x6c
> [<ffffffff811cd166>] tty_release+0x1e/0x2a
> [<ffffffff810cff1e>] __fput+0xcf/0x173
> [<ffffffff810cffdc>] fput+0x1a/0x1c
> [<ffffffff810cd185>] filp_close+0x6c/0x77
> [<ffffffff8104564d>] put_files_struct+0x79/0xcd
> [<ffffffff810456ed>] exit_files+0x4c/0x54
> [<ffffffff81047072>] do_exit+0x2bb/0x904
> [<ffffffff81010164>] ? mcount_call+0x5/0x31
> [<ffffffff8130db29>] oops_begin+0x0/0x91
> [<ffffffff8130fd30>] do_page_fault+0x9da/0xace
> [<ffffffff81064a83>] ? trace_hardirqs_off_caller+0x21/0xa4
> [<ffffffff81064b13>] ? trace_hardirqs_off+0xd/0xf
> [<ffffffff810644b0>] ? register_lock_class+0x20/0x35a
> [<ffffffff81064b13>] ? trace_hardirqs_off+0xd/0xf
> [<ffffffff8109f9a1>] ? expand+0x8c/0xb5
> [<ffffffff81064a83>] ? trace_hardirqs_off_caller+0x21/0xa4
> [<ffffffff81064b13>] ? trace_hardirqs_off+0xd/0xf
> [<ffffffff8102d4c9>] ? kernel_map_pages+0x122/0x12d
> [<ffffffff810a1f1e>] ? get_page_from_freelist+0x4cb/0x720
> [<ffffffff810a2501>] ? __alloc_pages_internal+0x152/0x4b5
> [<ffffffff8130d15a>] error_exit+0x0/0xc8
> [<ffffffffa0309aa2>] ? drm_ati_pcigart_init+0x1be/0x210 [drm]
> [<ffffffffa0309a3a>] ? drm_ati_pcigart_init+0x156/0x210 [drm]
> [<ffffffffa033568e>] radeon_cp_init+0x927/0x9a1 [radeon]
> [<ffffffffa0302e26>] drm_ioctl+0x1e4/0x26f [drm]
> [<ffffffff8116ca31>] ? _raw_spin_lock+0x68/0x116
> [<ffffffffa0334d67>] ? radeon_cp_init+0x0/0x9a1 [radeon]
> [<ffffffff810db014>] vfs_ioctl+0x64/0x7d
> [<ffffffff810db289>] do_vfs_ioctl+0x25c/0x279
> [<ffffffff8130c504>] ? trace_hardirqs_on_thunk+0x3a/0x3f
> [<ffffffff810db300>] sys_ioctl+0x5a/0x7e
> [<ffffffff8101034a>] system_call_fastpath+0x16/0x1b
>
>FIX kmalloc-32: Restoring 0xffff880015ac1088-0xffff880015ac108f=0xbb
>
>FIX kmalloc-32: Marking all objects used
>[drm:drm_release] *ERROR* Device busy: 1

Actions: View

Attachments on bug 457971: 313488