Attachment 313534 Details for Bug 458032 – dmesg info

dmesg info

dmesg.txt (text/plain), 30.55 KB, created by info on 2008-08-06 08:33:25 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: info

Created: 2008-08-06 08:33:25 UTC

Size: 30.55 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.25.11-97.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Mon Jul 21 01:09:10 EDT 2008
>Command line: ro root=UUID=c76e4d94-748b-46f0-a2c0-16387f1315b5 rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
> BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000037ea0000 (usable)
> BIOS-e820: 0000000037ea0000 - 0000000037eaf000 (ACPI data)
> BIOS-e820: 0000000037eaf000 - 0000000037f00000 (ACPI NVS)
> BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 155) 0 entries of 3200 used
>Entering add_active_range(0, 256, 229024) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP 000F7ED0, 0014 (r0 PTLTD )
>ACPI: RSDT 37EAA467, 0034 (r1 PTLTD    RSDT    6040000  LTP        0)
>ACPI: FACP 37EAEE20, 0074 (r1 FUJ    W37       6040000 W37     F4240)
>ACPI: DSDT 37EAA49B, 4985 (r1 FUJ    W37       6040000 MSFT  100000E)
>ACPI: FACS 37EAFFC0, 0040
>ACPI: SSDT 37EAEE94, 00D6 (r1 PTLTD  POWERNOW  6040000  LTP        1)
>ACPI: APIC 37EAEF6A, 005A (r1 PTLTD  	 APIC    6040000  LTP        0)
>ACPI: MCFG 37EAEFC4, 003C (r1 PTLTD    MCFG    6040000  LTP        0)
>ACPI: DMI detected: Fujitsu Siemens
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000037ea0000
>Entering add_active_range(0, 0, 155) 0 entries of 3200 used
>Entering add_active_range(0, 256, 229024) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-0000000037ea0000
>  NODE_DATA [000000000000b000 - 0000000000012fff]
>  bootmap [0000000000013000 -  0000000000019fd7] pages 7
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-7572bb] TEXT DATA BSS
>early res: 3 [37b25000-37e8f919] RAMDISK
>early res: 4 [9b800-9c7ff] EBDA
>early res: 5 [8000-afff] PGTABLE
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      155
>    0:      256 ->   229024
>On node 0 totalpages: 228923
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1376 pages reserved
>  DMA zone: 2563 pages, LIFO batch:0
>  DMA32 zone: 3075 pages used for memmap
>  DMA32 zone: 221853 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009b000 - 000000000009c000
>PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
>PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 42688 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 224416
>Policy zone: DMA32
>Kernel command line: ro root=UUID=c76e4d94-748b-46f0-a2c0-16387f1315b5 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 799.995 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Node 0: aperture @ e0e6000000 size 32 MB
>Aperture beyond 4GB. Ignoring.
>No AGP bridge found
>Memory: 892096k/916096k available (2644k kernel code, 23596k reserved, 1390k data, 348k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 1601.46 BogoMIPS (lpj=800734)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 28k freed
>ACPI: Core revision 20070126
>..MP-BIOS bug: 8254 timer not connected to IO-APIC
>Using local APIC timer interrupts.
>APIC timer calibration result 12499920
>Detected 12.499 MHz APIC timer.
>Brought up 1 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=224 bytes
>sizeof(task_struct)=6224 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000001
>  groups: 00000000,00000001
>net_namespace: 1016 bytes
>Time:  8:57:40  Date: 08/06/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
> 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:08: ioport range 0x1080-0x1080 has been reserved
>system 00:08: ioport range 0x1200-0x120f has been reserved
>system 00:08: ioport range 0x40b-0x40b has been reserved
>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
>system 00:08: ioport range 0x4d6-0x4d6 has been reserved
>system 00:08: ioport range 0xc00-0xc01 has been reserved
>system 00:08: ioport range 0xc14-0xc14 has been reserved
>system 00:08: ioport range 0xc50-0xc52 has been reserved
>system 00:08: ioport range 0xc6c-0xc6c has been reserved
>system 00:08: ioport range 0xc6f-0xc6f has been reserved
>system 00:08: ioport range 0xcd4-0xcd5 has been reserved
>system 00:08: ioport range 0xcd6-0xcd7 has been reserved
>system 00:08: ioport range 0xcd8-0xcdf has been reserved
>system 00:08: ioport range 0x8000-0x805f has been reserved
>system 00:08: ioport range 0xf40-0xf47 has been reserved
>system 00:08: ioport range 0x87f-0x87f has been reserved
>system 00:09: iomem range 0xe0000-0xfffff could not be reserved
>system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: 0xc0100000-0xc01fffff
>  PREFETCH window: 0x00000000c8000000-0x00000000cfffffff
>PCI: Bus 3, cardbus bridge: 0000:02:09.0
>  IO window: 0x0000a400-0x0000a4ff
>  IO window: 0x0000a800-0x0000a8ff
>  PREFETCH window: 0x50000000-0x53ffffff
>  MEM window: 0x54000000-0x57ffffff
>PCI: Bridge: 0000:00:14.4
>  IO window: a000-afff
>  MEM window: 0xc0200000-0xc02fffff
>  PREFETCH window: 0x0000000050000000-0x0000000053ffffff
>ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 20 (level, low) -> IRQ 20
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 3498k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1218013061.018:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:00.0: MSI quirk detected; MSI disabled
>pci 0000:01:05.0: Boot video device
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [TZS0] (51 C)
>ACPI: LNXTHERM:02 is registered as thermal_zone1
>ACPI: Thermal Zone [TZS2] (52 C)
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
>ACPI: PCI interrupt for device 0000:00:14.6 disabled
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>Yenta: CardBus bridge found at 0000:02:09.0 [1734:1092]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:09.0, mfunc 0x010a1b22, devctl 0x64
>Yenta: ISA IRQ mask 0x0ef8, PCI irq 20
>Socket status: 30000810
>Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
>pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
>pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 4:750:977
>Freeing unused kernel memory: 348k freed
>Write protecting the kernel read-only data: 1116k
>Marking TSC unstable due to TSC halts in idle
>ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0002000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25.11-97.fc9.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:13.2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0000000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x92a0b1, caps: 0xa04713/0x200000
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25.11-97.fc9.x86_64 ohci_hcd
>usb usb2: SerialNumber: 0000:00:13.0
>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0001000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input2
>hub 1-0:1.0: unable to enumerate USB device on port 2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 4 ports detected
>pccard: PCMCIA card inserted into slot 0
>cs: memory probe 0x50000000-0x53ffffff: excluding 0x50000000-0x53ffffff
>cs: memory probe 0xc0200000-0xc02fffff: excluding 0xc0200000-0xc021ffff
>pcmcia: registering new device pcmcia0.0
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25.11-97.fc9.x86_64 ohci_hcd
>usb usb3: SerialNumber: 0000:00:13.1
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:14.1 to 64
>scsi0 : pata_atiixp
>scsi1 : pata_atiixp
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15
>ata1.00: ATA-7: SAMSUNG MP0804H, UE100-14, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>usb 3-1: new full speed USB device using ohci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>hub 3-1:1.0: USB hub found
>hub 3-1:1.0: 7 ports detected
>ata2.00: ATAPI: _NEC DVD+/-RW ND-6650A, 1.42, max UDMA/33
>usb 3-1: New USB device found, idVendor=0451, idProduct=2077
>usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 3-1: Product: General Purpose USB Hub
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG MP0804H  UE10 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>usb 3-1.5: new full speed USB device using ohci_hcd and address 3
> sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            _NEC     DVD+-RW ND-6650A 1.42 PQ: 0 ANSI: 5
>usb 3-1.5: configuration #1 chosen from 1 choice
>usb 3-1.5: New USB device found, idVendor=067b, idProduct=2305
>usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1.5: Product: IEEE-1284 Controller
>usb 3-1.5: Manufacturer: Prolific Technology Inc.
>usb 3-1.7: new low speed USB device using ohci_hcd and address 4
>usb 3-1.7: configuration #1 chosen from 1 choice
>input: KYE Systems Corp. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1.7/3-1.7:1.0/input/input3
>input,hidraw0: USB HID v1.10 Keyboard [KYE Systems Corp. Wireless Keyboard & Mouse] on usb-0000:00:13.1-1.7
>input: KYE Systems Corp. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1.7/3-1.7:1.1/input/input4
>input,hidraw1: USB HID v1.10 Mouse [KYE Systems Corp. Wireless Keyboard & Mouse] on usb-0000:00:13.1-1.7
>usb 3-1.7: New USB device found, idVendor=0458, idProduct=0048
>usb 3-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1.7: Product: Wireless Keyboard & Mouse
>usb 3-1.7: Manufacturer: KYE Systems Corp.
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:8192 avtab hash slots allocated. Num of rules:171431
>SELinux:8192 avtab hash slots allocated. Num of rules:171431
>security:  6 users, 12 roles, 2356 types, 115 bools, 1 sens, 1024 cats
>security:  72 classes, 171431 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1218013071.164:2): policy loaded auid=4294967295 ses=4294967295
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
>usbcore: registered new interface driver usblp
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
>ACPI: Lid Switch [LID0]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: WMI: Mapper loaded
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:13/device:14/input/input8
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>proc_dir_entry 'VGA' already registered
>Pid: 669, comm: modprobe Not tainted 2.6.25.11-97.fc9.x86_64 #1
>
>Call Trace:
> [<ffffffff8112b95d>] ? idr_get_new+0x13/0x32
> [<ffffffff810e5bba>] proc_register+0x11b/0x151
> [<ffffffff810e5d62>] proc_mkdir_mode+0x3d/0x53
> [<ffffffff810e5d89>] proc_mkdir+0x11/0x13
> [<ffffffff8811480f>] :video:acpi_video_bus_add+0x21c/0xddd
> [<ffffffff810ee2df>] ? sysfs_create_link+0xbf/0x110
> [<ffffffff81170d7f>] acpi_device_probe+0x49/0x8c
> [<ffffffff811a8535>] driver_probe_device+0xc0/0x16e
> [<ffffffff811a8676>] __driver_attach+0x93/0xd3
> [<ffffffff811a85e3>] ? __driver_attach+0x0/0xd3
> [<ffffffff811a7d52>] bus_for_each_dev+0x4f/0x89
> [<ffffffff8112c3c6>] ? kobject_get+0x1a/0x22
> [<ffffffff811a8380>] driver_attach+0x1c/0x1e
> [<ffffffff811a75c9>] bus_add_driver+0xb7/0x200
> [<ffffffff811a883f>] driver_register+0x5e/0xde
> [<ffffffff811710fe>] acpi_bus_register_driver+0x3e/0x40
> [<ffffffff8811b03c>] :video:acpi_video_init+0x3c/0x5e
> [<ffffffff81056773>] sys_init_module+0x193f/0x1a87
> [<ffffffff810a3e4c>] ? do_sync_read+0xe7/0x12d
> [<ffffffff811710c0>] ? acpi_bus_register_driver+0x0/0x40
> [<ffffffff810a4891>] ? vfs_read+0xab/0x154
> [<ffffffff8100bedb>] system_call_after_swapgs+0x7b/0x80
>
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1c/device:1d/input/input9
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>ACPI: AC Adapter [ADP1] (on-line)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
>fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
>ACPI: Battery Slot [BAT0] (battery present)
>[fglrx]   vendor: 1002 device: 5955 count: 1
>[fglrx] ioport: bar 1, base 0x9000, size: 0x100
>[fglrx] Maximum main memory to use for locked dma buffers: 794 MBytes.
>[fglrx] PAT is enabled successfully!
>[fglrx] module loaded - fglrx 8.51.3 [Jul  3 2008] with 1 minors
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 23 (level, low) -> IRQ 23
>eth0: RealTek RTL8139 at 0xffffc200004f2000, 00:0a:e4:a6:c6:ed, IRQ 23
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
>wlan: 0.9.4
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>ath_pci: 0.9.4
>scsi2 : pata_pcmcia
>ata3: PATA max PIO0 cmd 0xa100 ctl 0xa10e irq 20
>input: PC Speaker as /devices/platform/pcspkr/input/input10
>ata3.00: CFA: TOSHIBA THNCF4G09QG, 3.00, max PIO4
>ata3.00: 7952112 sectors, multi 1: LBA 
>ata3.00: configured for PIO0
>ata3.00: configured for PIO0
>ata3: EH complete
>isa bounce pool size: 16 pages
>scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA THNCF4G0 3.00 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdb] 7952112 512-byte hardware sectors (4071 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdb] 7952112 512-byte hardware sectors (4071 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 2:0:0:0: [sdb] Attached SCSI removable disk
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>ACPI: PCI Interrupt 0000:02:09.2[C] -> GSI 21 (level, low) -> IRQ 21
>firewire_ohci: Added fw-ohci device 0000:02:09.2, OHCI version 1.10
>ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 20 (level, low) -> IRQ 20
>firewire_core: created device fw0: GUID 000ae4052510109a, S400
>ath_rate_sample: 1.2 (0.9.4)
>wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
>wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>wifi0: H/W encryption support: WEP AES AES_CCM TKIP
>wifi0: mac 7.8 phy 4.5 radio 5.6
>wifi0: Use hw queue 1 for WME_AC_BE traffic
>wifi0: Use hw queue 0 for WME_AC_BK traffic
>wifi0: Use hw queue 2 for WME_AC_VI traffic
>wifi0: Use hw queue 3 for WME_AC_VO traffic
>wifi0: Use hw queue 8 for CAB traffic
>wifi0: Use hw queue 9 for beacons
>wifi0: Atheros 5212: mem=0xc0200000, irq=20
>ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
>ALSA sound/pci/atiixp_modem.c:1095: atiixp-modem: codec 0 not available for modem
>ALSA sound/pci/ac97/ac97_codec.c:2152: MC'97 1 converters and GPIO not ready (0xff00)
>ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17
>ALSA sound/pci/atiixp.c:1432: atiixp: codec 1 not available for audio
>ACPI: PCI Interrupt 0000:02:09.3[A] -> GSI 20 (level, low) -> IRQ 20
>acer-wmi: Acer Laptop ACPI-WMI Extras version 0.1
>Registered led device: acer-wmi::mail
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>fuse init (API version 7.9)
>SELinux: initialized (dev sda1, type fuseblk), uses genfs_contexts
>Adding 1802232k swap on /dev/dm-1.  Priority:-1 extents:1 across:1802232k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-32 processors (1 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x4
>powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0x6
>powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x16
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (7168 buckets, 28672 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>warning: `mcstransd' uses deprecated v2 capabilities in a way that may be insecure.
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Clocksource tsc unstable (delta = 410555468 ns)
>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>BUG: unable to handle kernel NULL pointer dereference at 0000000000000002
>IP: [<ffffffff883c9855>] :wlan:giwscan_cb+0x90/0x928
>PGD 27992067 PUD 2edce067 PMD 0 
>Oops: 0000 [1] SMP 
>CPU 0 
>Modules linked in: autofs4 sunrpc ipt_REJECT nf_conntrack_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp ip6t_ipv6header nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables cpufreq_ondemand powernow_k8 freq_table fuse ipv6 acer_wmi wlan_scan_sta ath_rate_sample snd_atiixp snd_seq_dummy snd_atiixp_modem snd_ac97_codec ac97_bus snd_seq_oss snd_seq_midi_event snd_seq pcspkr snd_seq_device snd_pcm_oss snd_mixer_oss tifm_7xx1 ath_pci snd_pcm firewire_ohci 8139cp pata_pcmcia tifm_core firewire_core wlan snd_timer ath_hal(P) 8139too crc_itu_t snd k8temp mii serio_raw hwmon soundcore snd_page_alloc fglrx(P) i2c_piix4 i2c_core battery sg ac video output wmi button shpchp usblp joydev sr_mod cdrom dm_snapshot dm_zero dm_mirror dm_mod pata_acpi ata_generic pata_atiixp libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: scsi_wait_scan]
>Pid: 2207, comm: wpa_supplicant Tainted: P         2.6.25.11-97.fc9.x86_64 #1
>RIP: 0010:[<ffffffff883c9855>]  [<ffffffff883c9855>] :wlan:giwscan_cb+0x90/0x928
>RSP: 0018:ffff81002b4a99b8  EFLAGS: 00010293
>RAX: 0000000000000000 RBX: ffff8100361efe00 RCX: 0000000000000000
>RDX: ffff81002b4a9b48 RSI: ffff810036493200 RDI: ffff81002b4a9b60
>RBP: ffff81002b4a9b98 R08: ffff8100365e2000 R09: ffffffff8143efa0
>R10: ffff81002597b000 R11: ffff8100365e2700 R12: 0000000000000000
>R13: ffff810036493200 R14: ffffffff883c97c5 R15: ffff81002b4a9be8
>FS:  00007f78359ff7a0(0000) GS:ffffffff813f1000(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>CR2: 0000000000000002 CR3: 000000002ed7e000 CR4: 00000000000006e0
>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>Process wpa_supplicant (pid: 2207, threadinfo ffff81002b4a8000, task ffff81002799a000)
>Stack:  ffff81002b4a99c8 ffffffff8128f168 ffff81002b4a99f8 ffffffff812781a0
> ffff81002b4a9a08 0000000000000200 0000000000000200 0000000000000300
> ffff81003652a840 0000000000000000 ffff81002b4a9d38 ffffffff810b148d
>Call Trace:
> [<ffffffff8128f168>] ? _spin_unlock_bh+0xf/0x11
> [<ffffffff812781a0>] ? packet_poll+0x74/0x80
> [<ffffffff810b148d>] ? do_select+0x4db/0x506
> [<ffffffff81203437>] ? sock_alloc_send_skb+0xa1/0x1f9
> [<ffffffff8102b55f>] ? default_wake_function+0x0/0xf
> [<ffffffff8110482c>] ? avc_has_perm+0x4e/0x60
> [<ffffffff81203064>] ? sock_def_readable+0x18/0x67
> [<ffffffff883c97c5>] ? :wlan:giwscan_cb+0x0/0x928
> [<ffffffff884c30d8>] :wlan_scan_sta:sta_iterate+0x6c/0x91
> [<ffffffff883c3561>] :wlan:ieee80211_scan_iterate+0x19/0x1b
> [<ffffffff883c67ed>] :wlan:ieee80211_ioctl_giwscan+0x6c/0xb8
> [<ffffffff8127a1e9>] ioctl_standard_iw_point+0x16d/0x1fc
> [<ffffffff883c6781>] ? :wlan:ieee80211_ioctl_giwscan+0x0/0xb8
> [<ffffffff8127a30d>] ioctl_standard_call+0x95/0xb4
> [<ffffffff8127a457>] wext_ioctl_dispatch+0x9a/0x16e
> [<ffffffff8127a003>] ? ioctl_private_call+0x0/0x79
> [<ffffffff8127a278>] ? ioctl_standard_call+0x0/0xb4
> [<ffffffff8127a616>] wext_handle_ioctl+0x39/0x6f
> [<ffffffff8120e9f0>] dev_ioctl+0x5f8/0x621
> [<ffffffff81200080>] sock_ioctl+0x1fc/0x20a
> [<ffffffff810b00ce>] vfs_ioctl+0x2a/0x78
> [<ffffffff810b0363>] do_vfs_ioctl+0x247/0x261
> [<ffffffff810b03d2>] sys_ioctl+0x55/0x77
> [<ffffffff8100c052>] tracesys+0xd5/0xda
>
>
>Code: c7 45 b8 01 00 41 83 bb d8 02 00 00 06 75 0a 8b 06 89 45 ba 8b 46 04 eb 0a 8b 46 06 89 45 ba 66 8b 46 0a 66 89 42 0e 49 8b 47 08 <0f> b7 40 02 83 e0 01 83 f8 01 19 d2 83 e2 04 83 c2 14 83 f8 01 
>RIP  [<ffffffff883c9855>] :wlan:giwscan_cb+0x90/0x928
> RSP <ffff81002b4a99b8>
>CR2: 0000000000000002
>---[ end trace a6a7f40bf7ceb0b5 ]---
>eth0: no IPv6 routers present
>ath0: no IPv6 routers present

Actions: View

Attachments on bug 458032: 313534