Attachment 313541 Details for Bug 458039 – dmesg

dmesg

dmesg.log (text/plain), 59.83 KB, created by Sam Tygier on 2008-08-06 09:26:35 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Sam Tygier

Created: 2008-08-06 09:26:35 UTC

Size: 59.83 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27-0.166.rc0.git8.fc10.x86_64 (mockbuild@x86-6) (gcc version 4.3.1 20080708 (Red Hat 4.3.1-4) (GCC) ) #1 SMP Mon Jul 21 20:39:59 EDT 2008
>Command line: initrd=initrd0.img root=CDLABEL=Fedora-10-Alpha-x86_64 rootfstype=iso9660 ro liveimg quiet  rhgb  BOOT_IMAGE=vmlinuz0 
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
> BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
> BIOS-e820: 000000007fee0000 - 000000007fef5000 (ACPI data)
> BIOS-e820: 000000007fef5000 - 000000007ff80000 (ACPI NVS)
> BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>last_pfn = 0x7fee0 max_arch_pfn = 0x3ffffffff
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>init_memory_mapping
> 0000000000 - 007fe00000 page 2M
> 007fe00000 - 007fee0000 page 4k
>kernel direct mapping tables up to 7fee0000 @ 8000-c000
>last_map_addr: 7fee0000 end: 7fee0000
>RAMDISK: 7fa08000 - 7febfb9e
>DMI present.
>ACPI: RSDP 000F6A50, 0014 (r0 PTLTD )
>ACPI: RSDT 7FEEEF17, 0044 (r1 FSC    PC        6040000 NAYT        0)
>ACPI: FACP 7FEF4DDF, 0074 (r1 TYAN__ D1808___  6040000 PTL         3)
>ACPI: DSDT 7FEF0347, 4A98 (r1 TYAN__ D1808___  6040000 MSFT  100000E)
>ACPI: FACS 7FEF5FC0, 0040
>ACPI: TCPA 7FEF4E53, 0032 (r1 Phoeni  x        6040000  TL         0)
>ACPI: APIC 7FEF4E85, 0074 (r1 PTLTD  	 APIC    6040000  LTP        0)
>ACPI: MCFG 7FEF4EF9, 003C (r1 PTLTD    MCFG    6040000  LTP        0)
>ACPI: HPET 7FEF4F35, 0038 (r1 PTLTD  HPETTBL   6040000  LTP        1)
>ACPI: BOOT 7FEF4F6D, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
>ACPI: ASF! 7FEF4F95, 006B (r32 OEMID  OEMTBL    6040000 PTL         1)
>ACPI: SSDT 7FEEEF5B, 13EC (r1  PmRef    CpuPm     3000 INTL 20050228)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007fee0000
>Entering add_active_range(0, 0x0, 0x9e) 0 entries of 25600 used
>Entering add_active_range(0, 0x100, 0x7fee0) 1 entries of 25600 used
>Bootmem setup node 0 0000000000000000-000000007fee0000
>  NODE_DATA [000000000000a000 - 000000000001efff]
>  bootmap [000000000001f000 -  000000000002efdf] pages 10
>(6 early reservations) ==> bootmem [0000000000 - 007fee0000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 0000e56568]    TEXT DATA BSS ==> [0000200000 - 0000e56568]
>  #3 [007fa08000 - 007febfb9e]          RAMDISK ==> [007fa08000 - 007febfb9e]
>  #4 [000009e800 - 0000100000]    BIOS reserved ==> [000009e800 - 0000100000]
>  #5 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
>Scan SMP from ffff880000000000 for 1024 bytes.
>Scan SMP from ffff88000009fc00 for 1024 bytes.
>Scan SMP from ffff8800000f0000 for 65536 bytes.
>found SMP MP-table at [ffff8800000f6b00] 000f6b00
> [ffffe20000000000-ffffe20002ffffff] PMD -> [ffff880001200000-ffff8800041fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009e
>    0: 0x00000100 -> 0x0007fee0
>On node 0 totalpages: 523902
>  DMA zone: 96 pages used for memmap
>  DMA zone: 3262 pages reserved
>  DMA zone: 640 pages, LIFO batch:0
>  DMA32 zone: 12186 pages used for memmap
>  DMA32 zone: 507718 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
>IOAPIC[1]: apic_id 3, version 0, address 0xfec80000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Bus #0 is ISA
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0xffffffff base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PM: Registered nosave memory: 000000000009e000 - 000000000009f000
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
>PM: Registered nosave memory: 00000000000d0000 - 00000000000d4000
>PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>PERCPU: Allocating 442304 bytes of per cpu data
>NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
>Node to cpumask map at ffff880000030000 for 1 nodes
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 508358
>Policy zone: DMA32
>Kernel command line: initrd=initrd0.img root=CDLABEL=Fedora-10-Alpha-x86_64 rootfstype=iso9660 ro liveimg quiet  rhgb  BOOT_IMAGE=vmlinuz0 
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>Detected 1994.998 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1840 kB
> per task-struct memory footprint: 3456 bytes
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2027712k/2096000k available (3060k kernel code, 67896k reserved, 1753k data, 1544k init)
>CPA: page pool initialized 32 of 32 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay loop (skipped), value calculated using timer frequency.. <6>3989.99 BogoMIPS (lpj=1994998)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20080609
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Xeon(R) CPU            5130  @ 2.00GHz stepping 06
>Using local APIC timer interrupts.
>APIC timer calibration result 20781254
>Detected 20.781 MHz APIC timer.
>++++++++++++++++++++=_---CPU UP  1
>lockdep: fixing up alternatives.
>Booting processor 1/1 ip 6000
>Setting warm reset code and vector.
>1.
>2.
>3.
>Asserting INIT.
>Waiting for send to finish...
>Deasserting INIT.
>Waiting for send to finish...
>#startup loops: 2.
>Sending STARTUP #1.
>After apic_write.
>Startup point 1.
>Waiting for send to finish...
>Sending STARTUP #2.
>After apic_write.
>Initializing CPU#1
>CPU#1 (phys ID: 1) waiting for CALLOUT
>Startup point 1.
>Waiting for send to finish...
>After Startup.
>Before Callout 1.
>After Callout 1.
>CALLIN, before setup_local_APIC().
>Calibrating delay using timer specific routine.. <6>3990.02 BogoMIPS (lpj=1995014)
>Stack at about ffff88007ec0bf44
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>OK.
>CPU1: Intel(R) Xeon(R) CPU            5130  @ 2.00GHz stepping 06
>CPU has booted.
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Boot done.
>Before bogomips.
>Total of 2 processors activated (7980.02 BogoMIPS).
>Before bogocount - setting activated=1.
>sizeof(vma)=176 bytes
>sizeof(page)=96 bytes
>sizeof(inode)=1088 bytes
>sizeof(dentry)=256 bytes
>sizeof(ext3inode)=1488 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=9528 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>khelper used greatest stack depth: 5680 bytes left
>net_namespace: 1576 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  9:05:21  Date: 08/06/08
>NET: Registered protocol family 16
>No dock devices found.
>khelper used greatest stack depth: 4984 bytes left
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 12
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG at e0000000 - e0cfffff
>PCI: Using configuration type 1 for base access
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:00.0: PME# disabled
>pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:03.0: PME# disabled
>pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:04.0: PME# disabled
>pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:05.0: PME# disabled
>pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:06.0: PME# disabled
>pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:07.0: PME# disabled
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:01:00.0: PME# disabled
>pci 0000:01:00.3: PME# supported from D0 D3hot D3cold
>pci 0000:01:00.3: PME# disabled
>pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:01.0: PME# disabled
>pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:02.0: PME# disabled
>pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:05:00.0: PME# disabled
>pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
>pci 0000:05:00.1: PME# disabled
>pci 0000:08:00.0: supports D1
>pci 0000:08:00.0: supports D2
>pci 0000:08:00.1: supports D1
>pci 0000:08:00.1: supports D2
>pci 0000:0d:05.0: supports D1
>pci 0000:0d:05.0: supports D2
>pci 0000:0d:05.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:0d:05.0: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMF3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 14 15) *9
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>tracer: 1286 pages allocated for 65536 entries of 80 bytes
>   actual entries 65586
>ACPI: RTC can wake from S4
>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
>system 00:01: ioport range 0x800-0x80f has been reserved
>system 00:01: ioport range 0x1000-0x107f has been reserved
>system 00:01: ioport range 0x1180-0x11bf has been reserved
>system 00:01: ioport range 0xfe00-0xfe00 has been reserved
>system 00:01: ioport range 0xc05-0xc06 has been reserved
>system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved
>system 00:01: iomem range 0xfec81000-0xfec81fff has been reserved
>system 00:01: iomem range 0xfec81400-0xfec823ff could not be reserved
>pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
>pci 0000:02:00.0:   IO window: disabled
>pci 0000:02:00.0:   MEM window: disabled
>pci 0000:02:00.0:   PREFETCH window: disabled
>pci 0000:02:01.0: PCI bridge, secondary bus 0000:04
>pci 0000:02:01.0:   IO window: disabled
>pci 0000:02:01.0:   MEM window: disabled
>pci 0000:02:01.0:   PREFETCH window: disabled
>pci 0000:02:02.0: PCI bridge, secondary bus 0000:05
>pci 0000:02:02.0:   IO window: 0x2000-0x2fff
>pci 0000:02:02.0:   MEM window: 0xd0000000-0xd00fffff
>pci 0000:02:02.0:   PREFETCH window: disabled
>pci 0000:01:00.0: PCI bridge, secondary bus 0000:02
>pci 0000:01:00.0:   IO window: 0x2000-0x2fff
>pci 0000:01:00.0:   MEM window: 0xd0000000-0xd00fffff
>pci 0000:01:00.0:   PREFETCH window: disabled
>pci 0000:01:00.3: PCI bridge, secondary bus 0000:06
>pci 0000:01:00.3:   IO window: disabled
>pci 0000:01:00.3:   MEM window: disabled
>pci 0000:01:00.3:   PREFETCH window: disabled
>pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:02.0:   IO window: 0x2000-0x2fff
>pci 0000:00:02.0:   MEM window: 0xd0000000-0xd01fffff
>pci 0000:00:02.0:   PREFETCH window: disabled
>pci 0000:00:03.0: PCI bridge, secondary bus 0000:07
>pci 0000:00:03.0:   IO window: disabled
>pci 0000:00:03.0:   MEM window: disabled
>pci 0000:00:03.0:   PREFETCH window: disabled
>pci 0000:00:04.0: PCI bridge, secondary bus 0000:08
>pci 0000:00:04.0:   IO window: 0x3000-0x3fff
>pci 0000:00:04.0:   MEM window: 0xd0200000-0xd02fffff
>pci 0000:00:04.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
>pci 0000:00:05.0: PCI bridge, secondary bus 0000:09
>pci 0000:00:05.0:   IO window: disabled
>pci 0000:00:05.0:   MEM window: disabled
>pci 0000:00:05.0:   PREFETCH window: disabled
>pci 0000:00:06.0: PCI bridge, secondary bus 0000:0a
>pci 0000:00:06.0:   IO window: disabled
>pci 0000:00:06.0:   MEM window: disabled
>pci 0000:00:06.0:   PREFETCH window: disabled
>pci 0000:00:07.0: PCI bridge, secondary bus 0000:0b
>pci 0000:00:07.0:   IO window: disabled
>pci 0000:00:07.0:   MEM window: disabled
>pci 0000:00:07.0:   PREFETCH window: disabled
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0c
>pci 0000:00:1c.0:   IO window: disabled
>pci 0000:00:1c.0:   MEM window: disabled
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0d
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: 0xd0300000-0xd03fffff
>pci 0000:00:1e.0:   PREFETCH window: disabled
>pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>Pin 2-16 already programmed
>pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>Pin 2-16 already programmed
>pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>pci 0000:02:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:02:01.0 to 64
>pci 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:02:02.0 to 64
>PCI: Setting latency timer of device 0000:01:00.3 to 64
>Pin 2-16 already programmed
>pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>Pin 2-16 already programmed
>pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>Pin 2-16 already programmed
>pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>Pin 2-16 already programmed
>pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>Pin 2-16 already programmed
>pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>Pin 2-17 already programmed
>pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>debug: unmapping init memory ffff88007fa08000..ffff88007fec0000
>Simple Boot Flag at 0x41 set to 0x1
>audit: initializing netlink socket (disabled)
>type=2000 audit(1218013522.158:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 3960
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b
>pci 0000:00:1d.0: Performing full reset
>pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
>pci 0000:00:1d.1: Performing full reset
>pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
>pci 0000:00:1d.2: Performing full reset
>pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010
>pci 0000:00:1d.3: Performing full reset
>pci 0000:08:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>pcieport-driver 0000:00:02.0: found MSI capability
>pci_express 0000:00:02.0:pcie00: allocate port service
>pci_express 0000:00:02.0:pcie01: allocate port service
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>pcieport-driver 0000:00:03.0: found MSI capability
>pci_express 0000:00:03.0:pcie00: allocate port service
>pci_express 0000:00:03.0:pcie01: allocate port service
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>pcieport-driver 0000:00:04.0: found MSI capability
>pci_express 0000:00:04.0:pcie00: allocate port service
>pci_express 0000:00:04.0:pcie01: allocate port service
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>pcieport-driver 0000:00:05.0: found MSI capability
>pci_express 0000:00:05.0:pcie00: allocate port service
>pci_express 0000:00:05.0:pcie01: allocate port service
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>pcieport-driver 0000:00:06.0: found MSI capability
>pci_express 0000:00:06.0:pcie00: allocate port service
>pci_express 0000:00:06.0:pcie01: allocate port service
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>pcieport-driver 0000:00:07.0: found MSI capability
>pci_express 0000:00:07.0:pcie00: allocate port service
>pci_express 0000:00:07.0:pcie01: allocate port service
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>pcieport-driver 0000:00:1c.0: found MSI capability
>pci_express 0000:00:1c.0:pcie00: allocate port service
>pci_express 0000:00:1c.0:pcie02: allocate port service
>pci_express 0000:00:1c.0:pcie03: allocate port service
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>pci_express 0000:01:00.0:pcie11: allocate port service
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>pcieport-driver 0000:02:00.0: found MSI capability
>pci_express 0000:02:00.0:pcie21: allocate port service
>PCI: Setting latency timer of device 0000:02:01.0 to 64
>pcieport-driver 0000:02:01.0: found MSI capability
>pci_express 0000:02:01.0:pcie21: allocate port service
>PCI: Setting latency timer of device 0000:02:02.0 to 64
>pcieport-driver 0000:02:02.0: found MSI capability
>pci_express 0000:02:02.0:pcie21: allocate port service
>aer 0000:00:02.0:pcie01: AER service couldn't init device: no _OSC support
>aer 0000:00:03.0:pcie01: AER service couldn't init device: no _OSC support
>aer 0000:00:04.0:pcie01: AER service couldn't init device: no _OSC support
>aer 0000:00:05.0:pcie01: AER service couldn't init device: no _OSC support
>aer 0000:00:06.0:pcie01: AER service couldn't init device: no _OSC support
>aer 0000:00:07.0:pcie01: AER service couldn't init device: no _OSC support
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input1
>ACPI: Power Button (CM) [PWRB]
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 3) is a 16550A
>00:02: ttyS0 at I/O 0x3f8 (irq = 3) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input2
>Driver 'sd' needs updating - please use bus_type methods
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 4:926:69
>debug: unmapping init memory ffffffff814e2000..ffffffff81664000
>Write protecting the kernel read-only data: 1380k
>mount used greatest stack depth: 4768 bytes left
>modprobe used greatest stack depth: 4528 bytes left
>Driver 'sr' needs updating - please use bus_type methods
>loop: module loaded
>udevd version 124 started
>USB Universal Host Controller Interface driver v3.0
>Pin 2-17 already programmed
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>drivers/usb/core/inode.c: creating file 'devices'
>drivers/usb/core/inode.c: creating file '001'
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: detected 2 ports
>uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.0: Performing full reset
>uhci_hcd 0000:00:1d.0: supports USB remote wakeup
>uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001800
>usb usb1: default language 0x0409
>usb usb1: uevent
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>usb 1-0:1.0: uevent
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: power on to power good time: 2ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
>hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
>drivers/usb/core/inode.c: creating file '001'
>uhci_hcd 0000:00:1d.0: port 2 portsc 009b,00
>hub 1-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27-0.166.rc0.git8.fc10.x86_64 uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '002'
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: detected 2 ports
>uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.1: Performing full reset
>uhci_hcd 0000:00:1d.1: supports USB remote wakeup
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
>usb usb2: default language 0x0409
>usb usb2: uevent
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>usb 2-0:1.0: uevent
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: individual port over-current protection
>hub 2-0:1.0: power on to power good time: 2ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27-0.166.rc0.git8.fc10.x86_64 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.1
>Pin 2-18 already programmed
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '003'
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: detected 2 ports
>uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.2: Performing full reset
>uhci_hcd 0000:00:1d.2: supports USB remote wakeup
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
>usb usb3: default language 0x0409
>usb usb3: uevent
>usb usb3: usb_probe_device
>usb usb3: configuration #1 chosen from 1 choice
>usb usb3: adding 3-0:1.0 (config #1, interface 0)
>usb 3-0:1.0: uevent
>hub 3-0:1.0: usb_probe_interface
>hub 3-0:1.0: usb_probe_interface - got id
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hub 3-0:1.0: standalone hub
>hub 3-0:1.0: no power switching (usb 1.0)
>hub 3-0:1.0: individual port over-current protection
>hub 3-0:1.0: power on to power good time: 2ms
>hub 3-0:1.0: local power source is good
>hub 3-0:1.0: trying to enable port power on non-switchable hub
>hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
>drivers/usb/core/inode.c: creating file '001'
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.27-0.166.rc0.git8.fc10.x86_64 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.2
>Pin 2-16 already programmed
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '004'
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: detected 2 ports
>uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.3: Performing full reset
>uhci_hcd 0000:00:1d.3: supports USB remote wakeup
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
>usb usb4: default language 0x0409
>usb usb4: uevent
>usb usb4: usb_probe_device
>usb usb4: configuration #1 chosen from 1 choice
>usb usb4: adding 4-0:1.0 (config #1, interface 0)
>usb 4-0:1.0: uevent
>hub 4-0:1.0: usb_probe_interface
>hub 4-0:1.0: usb_probe_interface - got id
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hub 4-0:1.0: standalone hub
>hub 4-0:1.0: no power switching (usb 1.0)
>hub 4-0:1.0: individual port over-current protection
>hub 4-0:1.0: power on to power good time: 2ms
>hub 4-0:1.0: local power source is good
>hub 4-0:1.0: trying to enable port power on non-switchable hub
>usb 1-2: new full speed USB device using uhci_hcd and address 2
>drivers/usb/core/inode.c: creating file '001'
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.27-0.166.rc0.git8.fc10.x86_64 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.3
>Pin 2-17 already programmed
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>drivers/usb/core/inode.c: creating file '005'
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
>ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
>ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT
>modprobe used greatest stack depth: 4112 bytes left
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: supports USB remote wakeup
>ehci_hcd 0000:00:1d.7: irq 17, io mem 0xd0604000
>ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>usb 1-2: uhci_result_common: failed with status 440000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: default language 0x0409
>usb usb5: uevent
>usb usb5: usb_probe_device
>usb usb5: configuration #1 chosen from 1 choice
>usb usb5: adding 5-0:1.0 (config #1, interface 0)
>usb 5-0:1.0: uevent
>hub 5-0:1.0: usb_probe_interface
>hub 5-0:1.0: usb_probe_interface - got id
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>hub 5-0:1.0: standalone hub
>hub 5-0:1.0: no power switching (usb 1.0)
>hub 5-0:1.0: individual port over-current protection
>hub 5-0:1.0: power on to power good time: 20ms
>hub 5-0:1.0: local power source is good
>hub 5-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: EHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.27-0.166.rc0.git8.fc10.x86_64 ehci_hcd
>usb usb5: SerialNumber: 0000:00:1d.7
>Pin 2-18 already programmed
>pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>pata_acpi 0000:00:1f.1: PCI INT A disabled
>ahci 0000:00:1f.2: version 3.0
>Pin 2-19 already programmed
>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led pmp slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 19
>ata2: SATA max UDMA/133 abar m1024@0xd0604400 port 0xd0604580 irq 19
>ata3: SATA max UDMA/133 abar m1024@0xd0604400 port 0xd0604600 irq 19
>ata4: SATA max UDMA/133 abar m1024@0xd0604400 port 0xd0604680 irq 19
>ata5: SATA max UDMA/133 abar m1024@0xd0604400 port 0xd0604700 irq 19
>ata6: SATA max UDMA/133 abar m1024@0xd0604400 port 0xd0604780 irq 19
>usb 1-2: uhci_result_common: failed with status 440000
>usb 1-2: device not accepting address 2, error -71
>hub 1-0:1.0: unable to enumerate USB device on port 2
>hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004
>hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 5-0:1.0: state 7 ports 8 chg 0000 evt 0000
>ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
>hub 5-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
>hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
>ehci_hcd 0000:00:1d.7: port 2 high speed
>ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
>usb 5-2: new high speed USB device using ehci_hcd and address 2
>ehci_hcd 0000:00:1d.7: port 2 high speed
>ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
>usb 5-2: default language 0x0409
>usb 5-2: uevent
>usb 5-2: usb_probe_device
>usb 5-2: configuration #1 chosen from 1 choice
>usb 5-2: adding 5-2:1.0 (config #1, interface 0)
>usb 5-2:1.0: uevent
>hub 5-2:1.0: usb_probe_interface
>hub 5-2:1.0: usb_probe_interface - got id
>hub 5-2:1.0: USB hub found
>hub 5-2:1.0: 4 ports detected
>hub 5-2:1.0: standalone hub
>hub 5-2:1.0: individual port power switching
>hub 5-2:1.0: individual port over-current protection
>hub 5-2:1.0: Single TT
>hub 5-2:1.0: TT requires at most 32 FS bit times (2664 ns)
>hub 5-2:1.0: Port indicators are supported
>hub 5-2:1.0: power on to power good time: 100ms
>hub 5-2:1.0: local power source is good
>hub 5-2:1.0: enabling power on all ports
>usb 5-2: link qh256-0001/ffff88007b4ff140 start 255 [1/0 us]
>drivers/usb/core/inode.c: creating file '002'
>usb 5-2: New USB device found, idVendor=05e3, idProduct=0608
>usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 5-2: Product: USB2.0 Hub
>hub 5-2:1.0: state 7 ports 4 chg 0000 evt 0000
>hub 5-2:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
>usb usb2: suspend_rh (auto-stop)
>usb usb3: suspend_rh (auto-stop)
>hub 5-2:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: WDC WD1500ADFD-00NLR5, 21.07QR5, max UDMA/133
>ata1.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>usb 5-2.1: new low speed USB device using ehci_hcd and address 3
>usb 5-2.1: skipped 1 descriptor after interface
>usb 5-2.1: default language 0x0409
>usb 5-2.1: uevent
>usb 5-2.1: usb_probe_device
>usb 5-2.1: configuration #1 chosen from 1 choice
>usb 5-2.1: adding 5-2.1:1.0 (config #1, interface 0)
>usb 5-2.1:1.0: uevent
>usbhid 5-2.1:1.0: usb_probe_interface
>usbhid 5-2.1:1.0: usb_probe_interface - got id
>input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb5/5-2/5-2.1/5-2.1:1.0/input/input4
>usb usb4: suspend_rh (auto-stop)
>input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-2.1
>drivers/usb/core/inode.c: creating file '003'
>usb 5-2.1: New USB device found, idVendor=046d, idProduct=c043
>usb 5-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 5-2.1: Product: USB-PS/2 Optical Mouse
>usb 5-2.1: Manufacturer: Logitech
>hub 5-2:1.0: state 7 ports 4 chg 0000 evt 0002
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATA-7: HDT722525DLA380, V44OA9BA, max UDMA/133
>ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata2.00: configured for UDMA/133
>usb usb1: suspend_rh (auto-stop)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 21.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 293046768 512-byte hardware sectors (150040 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 293046768 512-byte hardware sectors (150040 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Direct-Access     ATA      HDT722525DLA380  V44O PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 < sdb5 sdb6 >
>hub 2-0:1.0: hub_suspend
>usb usb2: bus auto-suspend
>usb usb2: suspend_rh
>hub 3-0:1.0: hub_suspend
>usb usb3: bus auto-suspend
>usb usb3: suspend_rh
>hub 1-0:1.0: hub_suspend
>usb usb1: bus auto-suspend
>usb usb1: suspend_rh
>hub 4-0:1.0: hub_suspend
>usb usb4: bus auto-suspend
>usb usb4: suspend_rh
>sd 1:0:0:0: [sdb] Attached SCSI disk
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>Pin 2-16 already programmed
>firewire_ohci 0000:0d:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>firewire_ohci: Added fw-ohci device 0000:0d:05.0, OHCI version 1.10
>ata_piix 0000:00:1f.1: version 2.12
>Pin 2-18 already programmed
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>modprobe used greatest stack depth: 3944 bytes left
>scsi6 : ata_piix
>modprobe used greatest stack depth: 2312 bytes left
>scsi7 : ata_piix
>ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
>ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
>ata7.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB05, max UDMA/33
>ata7.01: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB05, max UDMA/33
>ata7.00: configured for UDMA/33
>ata7.01: configured for UDMA/33
>ata8: port disabled. ignoring.
>isa bounce pool size: 16 pages
>scsi 6:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S182D SB05 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 6:0:0:0: Attached scsi CD-ROM sr0
>sr 6:0:0:0: Attached scsi generic sg2 type 5
>scsi 6:0:1:0: CD-ROM            TSSTcorp CD/DVDW SH-S182D SB05 PQ: 0 ANSI: 5
>sr1: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
>sr 6:0:1:0: Attached scsi CD-ROM sr1
>sr 6:0:1:0: Attached scsi generic sg3 type 5
>firewire_core: created device fw0: GUID 00e081000027b9bf, S400
>ISO 9660 Extensions: Microsoft Joliet Level 3
>Unable to load NLS charset utf8
>Unable to load NLS charset utf8
>ISO 9660 Extensions: RRIP_1991A
>squashfs: version 3.3 (2007/10/31) Phillip Lougher
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1218013535.403:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux: 8192 avtab hash slots, 165739 rules.
>SELinux: 8192 avtab hash slots, 165739 rules.
>SELinux:  8 users, 13 roles, 2421 types, 118 bools, 1 sens, 1024 cats
>SELinux:  73 classes, 165739 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=6809
>SELinux: inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=4882
>SELinux: inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=4881
>SELinux: initialized (dev loop2, type squashfs), not configured for labeling
>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
>SELinux: initialized (dev sr1, type iso9660), uses genfs_contexts
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>type=1403 audit(1218013536.591:3): policy loaded auid=4294967295 ses=4294967295
>udevd version 124 started
>usb usb1: uevent
>usb 1-0:1.0: uevent
>usb usb2: uevent
>usb 2-0:1.0: uevent
>usb usb3: uevent
>usb 3-0:1.0: uevent
>usb usb4: uevent
>usb 4-0:1.0: uevent
>usb usb5: uevent
>usb 5-0:1.0: uevent
>usb 5-2: uevent
>usb 5-2.1: uevent
>usb 5-2.1:1.0: uevent
>usb 5-2:1.0: uevent
>EDAC MC: Ver: 2.1.0 Jul 21 2008
>EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0
>EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
>e1000e: Copyright (c) 1999-2008 Intel Corporation.
>Pin 2-18 already programmed
>e1000e 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>eth0: (PCI Express:2.5GB/s:Width x4) 00:e0:81:77:12:ca
>eth0: Intel(R) PRO/1000 Network Connection
>eth0: MAC: 3, PHY: 5, PBA No: 401010-0f1
>Pin 2-19 already programmed
>e1000e 0000:05:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:05:00.1 to 64
>eth1: (PCI Express:2.5GB/s:Width x4) 00:e0:81:77:12:cb
>eth1: Intel(R) PRO/1000 Network Connection
>eth1: MAC: 3, PHY: 5, PBA No: 401010-0f1
>iTCO_vendor_support: vendor-support=0
>input: PC Speaker as /devices/platform/pcspkr/input/input5
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
>iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>parport_pc 00:03: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>tpm_inf_pnp 00:04: Found TPM with ID IFX0102
>tpm_inf_pnp 00:04: TPM found: config base 0x4e, data base 0x1670, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
>SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
>Pin 2-19 already programmed
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>intel_rng: FWH not detected
>ppdev: user-space parallel port driver
>ath5k_pci 0000:0d:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>ath5k_pci 0000:0d:04.0: registered as 'phy0'
>phy0: Selected rate control algorithm 'pid'
>ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
>Pin 2-16 already programmed
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:2069: chipset global capabilities = 0x4401
>ALSA sound/pci/hda/hda_intel.c:754: codec_mask = 0x1
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3025:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3029:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3030:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:3038:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x1c, aux=0x15
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Surround Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Center Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave LFE Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Side Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Headphone Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Speaker Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Mono Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Line-Out Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Surround Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Center Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave LFE Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Side Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Speaker Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Mono Playback Switch, skipped
>Pin 2-17 already programmed
>HDA Intel 0000:08:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:08:00.1 to 64
>ALSA sound/pci/hda/hda_intel.c:2069: chipset global capabilities = 0x1001
>ALSA sound/pci/hda/hda_intel.c:754: codec_mask = 0x1
>EXT3 FS on dm-0, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>Adding 5116660k swap on /dev/sda5.  Priority:-1 extents:1 across:5116660k
>Adding 2104472k swap on /dev/sdb1.  Priority:-2 extents:1 across:2104472k
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>firmware: requesting intel-ucode/06-0f-06
>firmware: requesting intel-ucode/06-0f-06
>microcode: CPU0 updated from revision 0xc9 to 0xcd, date = 09162007 
>microcode: CPU1 updated from revision 0xc9 to 0xcd, date = 09162007 
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>------------[ cut here ]------------
>WARNING: at net/core/dev.c:1330 __netif_schedule+0x36/0xc3() (Not tainted)
>Modules linked in: sunrpc ipv6 dm_mirror dm_log snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq arc4 ecb crypto_blkcipher snd_seq_device snd_pcm_oss snd_mixer_oss ath5k snd_pcm snd_timer snd_page_alloc ppdev snd_hwdep snd mac80211 i2c_i801 tpm_infineon parport_pc tpm iTCO_wdt parport tpm_bios pcspkr i2c_core iTCO_vendor_support e1000e shpchp serio_raw cfg80211 soundcore i5000_edac edac_core ext3 jbd mbcache dm_snapshot dm_mod squashfs ata_generic ata_piix ehci_hcd ahci firewire_ohci firewire_core crc_itu_t pata_acpi uhci_hcd loop sr_mod cdrom [last unloaded: freq_table]
>Pid: 3177, comm: NetworkManager Not tainted 2.6.27-0.166.rc0.git8.fc10.x86_64 #1
>
>Call Trace:
> [<ffffffff8103f6a4>] warn_on_slowpath+0x65/0xac
> [<ffffffff81060d80>] ? trace_hardirqs_on+0xd/0xf
> [<ffffffff81060d4f>] ? trace_hardirqs_on_caller+0x10f/0x133
> [<ffffffff81060d80>] ? trace_hardirqs_on+0xd/0xf
> [<ffffffff8126e4d7>] ? __netif_schedule+0x7/0xc3
> [<ffffffff8108d315>] ? ftrace_record_ip+0x206/0x22b
> [<ffffffff8100c114>] ? mcount_call+0x5/0x31
> [<ffffffff8126e506>] __netif_schedule+0x36/0xc3
> [<ffffffffa017af69>] ieee80211_wake_queue+0x75/0x7a [mac80211]
> [<ffffffffa017af8d>] ieee80211_wake_queues+0x1f/0x36 [mac80211]
> [<ffffffffa01e1435>] ath5k_txq_cleanup+0x1ec/0x2fa [ath5k]
> [<ffffffffa01e164d>] ath5k_stop_locked+0xb4/0xe9 [ath5k]
> [<ffffffffa01e1b15>] ath5k_init+0x7c/0x17f [ath5k]
> [<ffffffffa01e1c2a>] ath5k_start+0x12/0x14 [ath5k]
> [<ffffffffa0166adc>] ieee80211_open+0x249/0x55b [mac80211]
> [<ffffffff8100c114>] ? mcount_call+0x5/0x31
> [<ffffffff81280e60>] ? eth_validate_addr+0x0/0x3d
> [<ffffffff8127180b>] dev_open+0x8b/0xcc
> [<ffffffff81271129>] dev_change_flags+0xb0/0x173
> [<ffffffff81278eac>] do_setlink+0x291/0x353
> [<ffffffff812f5cb6>] ? _read_unlock+0x2b/0x30
> [<ffffffff8127907e>] rtnl_setlink+0x110/0x112
> [<ffffffff8127a012>] rtnetlink_rcv_msg+0x1c9/0x1e7
> [<ffffffff81279e49>] ? rtnetlink_rcv_msg+0x0/0x1e7
> [<ffffffff8128b26a>] netlink_rcv_skb+0x43/0x95
> [<ffffffff81279e40>] rtnetlink_rcv+0x2e/0x37
> [<ffffffff8128adee>] netlink_unicast+0x119/0x182
> [<ffffffff8128b0ba>] netlink_sendmsg+0x263/0x276
> [<ffffffff81263350>] __sock_sendmsg+0x5e/0x67
> [<ffffffff81263cce>] sock_sendmsg+0xcc/0xe5
> [<ffffffff81053ef1>] ? autoremove_wake_function+0x0/0x3d
> [<ffffffff8105fd49>] ? trace_hardirqs_off_caller+0x21/0xa4
> [<ffffffff81264720>] ? move_addr_to_kernel+0x45/0x4e
> [<ffffffff8126b8bf>] ? verify_iovec+0x54/0x95
> [<ffffffff81263ebe>] sys_sendmsg+0x1d7/0x241
> [<ffffffff81060d4f>] ? trace_hardirqs_on_caller+0x10f/0x133
> [<ffffffff81060d80>] ? trace_hardirqs_on+0xd/0xf
> [<ffffffff8103570b>] ? hrtick_set+0x8a/0xf6
> [<ffffffff810ccb16>] ? path_put+0x22/0x26
> [<ffffffff81014d56>] ? syscall_trace_enter+0x114/0x126
> [<ffffffff8100c509>] tracesys+0xd0/0xd5
>
>---[ end trace bb3bfa687a041675 ]---
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
>eth0: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>usb 5-2.1: link qh8-0e01/ffff88007b4ff280 start 7 [1/2 us]
>usb 5-2.1: unlink qh8-0e01/ffff88007b4ff280 start 7 [1/2 us]
>ehci_hcd 0000:00:1d.7: reused qh ffff88007b4ff280 schedule
>usb 5-2.1: link qh8-0e01/ffff88007b4ff280 start 7 [1/2 us]
>usb 5-2.1: unlink qh8-0e01/ffff88007b4ff280 start 7 [1/2 us]
>ehci_hcd 0000:00:1d.7: reused qh ffff88007b4ff280 schedule
>usb 5-2.1: link qh8-0e01/ffff88007b4ff280 start 7 [1/2 us]
>fuse init (API version 7.9)
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>Bluetooth: Core ver 2.12
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.10
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.10
>Bluetooth: BNEP (Ethernet Emulation) ver 1.2
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x8
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x8
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x6
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x8
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x8
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x6
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x8
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x8
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x6
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
>hub 5-2:1.0: state 7 ports 4 chg 0000 evt 0010
>hub 5-2:1.0: port 4, status 0101, change 0001, 12 Mb/s
>hub 5-2:1.0: debounce: port 4: total 100ms stable 100ms status 0x101
>hub 5-2:1.0: port 4 not reset yet, waiting 10ms
>usb 5-2.4: new high speed USB device using ehci_hcd and address 4
>hub 5-2:1.0: port 4 not reset yet, waiting 10ms
>usb 5-2.4: default language 0x0409
>usb 5-2.4: uevent
>usb 5-2.4: usb_probe_device
>usb 5-2.4: configuration #1 chosen from 1 choice
>usb 5-2.4: adding 5-2.4:1.0 (config #1, interface 0)
>usb 5-2.4:1.0: uevent
>drivers/usb/core/inode.c: creating file '004'
>usb 5-2.4: New USB device found, idVendor=1221, idProduct=3234
>usb 5-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 5-2.4: Product: Flash Disk
>usb 5-2.4: Manufacturer: USB 2
>usb 5-2.4: SerialNumber: 2008061016480093
>Initializing USB Mass Storage driver...
>usb-storage 5-2.4:1.0: usb_probe_interface
>usb-storage 5-2.4:1.0: usb_probe_interface - got id
>scsi8 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>scsi 8:0:0:0: Direct-Access     USB 2.0  Flash Disk       2.10 PQ: 0 ANSI: 2
>sd 8:0:0:0: [sdc] 4120576 512-byte hardware sectors (2110 MB)
>sd 8:0:0:0: [sdc] Write Protect is off
>sd 8:0:0:0: [sdc] Mode Sense: 0b 00 00 08
>sd 8:0:0:0: [sdc] Assuming drive cache: write through
>sd 8:0:0:0: [sdc] 4120576 512-byte hardware sectors (2110 MB)
>sd 8:0:0:0: [sdc] Write Protect is off
>sd 8:0:0:0: [sdc] Mode Sense: 0b 00 00 08
>sd 8:0:0:0: [sdc] Assuming drive cache: write through
> sdc:
>sd 8:0:0:0: [sdc] Attached SCSI removable disk
>sd 8:0:0:0: Attached scsi generic sg4 type 0
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x8
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x8
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x6
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x8
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x8
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x6
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
>SELinux: initialized (dev sdc, type vfat), uses genfs_contexts

Actions: View

Attachments on bug 458039: 313540 | 313541 | 313542 | 313543