Attachment 313610 Details for Bug 458013 – Kdump on Dom0 worked correctly with .88.el5 Kernel

Kdump on Dom0 worked correctly with .88.el5 Kernel

work.txt (text/plain), 19.08 KB, created by Qian Cai on 2008-08-06 16:47:00 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Qian Cai

Created: 2008-08-06 16:47:00 UTC

Size: 19.08 KB

patch

obsolete

>ï»¿SysRq : Trigger a crashdump
>Linux version 2.6.18-88.el5 (brewbuilder@hs20-bc2-2.build.redhat.com) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-41)) #1 SMP Tue Apr 1 19:01:18 EDT 2008
>Command line: ro root=/dev/VolGroup00/LogVol00 console=ttyS1,115200 irqpoll maxcpus=1 reset_devices memmap=exactmap memmap=640K@0K memmap=5116K@32768K memmap=125300K@38524K elfcorehdr=163824K memmap=32K#1048352K
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000100 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffc8000 (usable)
> BIOS-e820: 000000003ffc8000 - 000000003ffd0000 (ACPI data)
> BIOS-e820: 000000003ffd0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
>user-defined physical RAM map:
> user: 0000000000000000 - 00000000000a0000 (usable)
> user: 0000000002000000 - 00000000024ff000 (usable)
> user: 000000000259f000 - 0000000009ffc000 (usable)
> user: 000000003ffc8000 - 000000003ffd0000 (ACPI data)
>DMI 2.3 present.
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000009ffc000
>Bootmem setup node 0 0000000000000000-0000000009ffc000
>Memory for crash kernel (0x0 to 0x0) notwithin permissible range
>disabling kdump
>ACPI: PM-Timer IO Port: 0x908
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:6 APIC version 20
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
>Processor #4 15:6 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>Processor #2 15:6 APIC version 20
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
>Processor #6 15:6 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:6 APIC version 20
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
>Processor #5 15:6 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>Processor #3 15:6 APIC version 20
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
>Processor #7 15:6 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
>IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Setting APIC routing to physical flat
>ACPI: HPET id: 0x10228201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 00000000000a0000 - 0000000002000000
>Nosave address range: 00000000024ff000 - 000000000259f000
>Allocating PCI resources starting at 40000000 (gap: 3ffd0000:c0030000)
>SMP: Allowing 8 CPUs, 0 hotplug CPUs
>Built 1 zonelists.  Total pages: 32197
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=ttyS1,115200 irqpoll maxcpus=1 reset_devices memmap=exactmap memmap=640K@0K memmap=5116K@32768K memmap=125300K@38524K elfcorehdr=163824K memmap=32K#1048352K
>Misrouted IRQ fixup and polling support enabled
>This may significantly impact system performance
>Initializing CPU#0
>PID hash table entries: 512 (order: 9, 4096 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
>Checking aperture...
>Memory: 118692k/163824k available (2456k kernel code, 12364k reserved, 1246k data, 196k init)
>Calibrating delay using timer specific routine.. 6416.40 BogoMIPS (lpj=3208202)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU0: Thermal monitoring enabled (TM1)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>result 16667938
>Detected 16.667 MHz APIC timer.
>Brought up 1 CPUs
>testing NMI watchdog ... OK.
>time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
>time.c: Detected 3200.263 MHz processor.
>checking if image is initramfs... it is
>Freeing initrd memory: 3023k freed
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11), disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11), disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11), disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11), disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11), disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11), disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11), disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>PCI-GART: No AMD northbridge found.
>pnp: 00:01: ioport range 0x408-0x40f has been reserved
>pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:01: ioport range 0x700-0x71f has been reserved
>PCI: Bridge: 0000:0a:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:0a:01.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:0a:02.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:09:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:09:00.3
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:02.0
>  IO window: disabled.
>  MEM window: fdf00000-fdffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: 4000-4fff
>  MEM window: fdd00000-fdefffff
>  PREFETCH window: 50000000-500fffff
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:05.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:02:00.0
>  IO window: disabled.
>  MEM window: f8000000-f9ffffff
>  PREFETCH window: 50100000-501fffff
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: f8000000-f9ffffff
>  PREFETCH window: 50100000-501fffff
>PCI: Bridge: 0000:04:00.0
>  IO window: disabled.
>  MEM window: fa000000-fbffffff
>  PREFETCH window: 50200000-502fffff
>PCI: Bridge: 0000:00:07.0
>  IO window: disabled.
>  MEM window: fa000000-fbffffff
>  PREFETCH window: 50200000-502fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 2000-3fff
>  MEM window: f7e00000-f7ffffff
>  PREFETCH window: d8000000-dfffffff
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>GSI 17 sharing vector 0xB1 and IRQ 17
>ACPI: PCI Interrupt 0000:0a:01.0[A] -> GSI 17 (level, low) -> IRQ 177
>GSI 18 sharing vector 0xB9 and IRQ 18
>ACPI: PCI Interrupt 0000:0a:02.0[A] -> GSI 18 (level, low) -> IRQ 185
>NET: Registered protocol family 2
>IP route cache hash table entries: 1024 (order: 1, 8192 bytes)
>TCP established hash table entries: 4096 (order: 4, 65536 bytes)
>TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
>TCP: Hash tables configured (established 4096 bind 2048)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1207701003.586:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 11A1AB3E644B0A76
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Thermal Zone [THM0] (8 C)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Ã¿Ã¿serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ESB2: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 177
>ESB2: chipset revision 9
>ESB2: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x0500-0x0507, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0x0508-0x050f, BIOS settings: hdc:pio, hdd:pio
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S4 S5)
>Freeing unused kernel memory: 196k freed
>Write protecting the kernel read-only data: 475k
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Loading scsi_mod.ko module
>SCSI subsystem initialized
>Loading sd_mod.ko module
>Loading cciss.ko module
>HP CISS Driver (v 3.6.20-RH1)
>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>cciss0: <0x3230> at PCI 0000:06:00.0 IRQ 98 using DAC
>      blocks= 142130880 block_size= 512
>      heads= 255, sectors= 32, cylinders= 17418
>
>      blocks= 142130880 block_size= 512
>      heads= 255, sectors= 32, cylinders= 17418
>
> cciss/c0d0: p1 p2
>Loading libata.ko module
>Loading ata_piix.ko module
>Loading jbd.ko module
>Loading ext3.ko module
>Loading dm-mod.ko module
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
>Loading dm-mirror.ko module
>Loading dm-zero.ko module
>Loading dm-snapshot.ko module
>Creating Block Devices
>Creating block device cciss/c0d0
>Creating block device ram0
>Creating block device ram1
>Creating block device ram10
>Creating block device ram11
>Creating block device ram12
>Creating block device ram13
>Creating block device ram14
>Creating block device ram15
>Creating block device ram2
>Creating block device ram3
>Creating block device ram4
>Creating block device ram5
>Creating block device ram6
>Creating block device ram7
>Creating block device ram8
>Creating block device ram9
>Making device-mapper control node
>Scanning logical volumes
>  Reading all physical volumes.  This may take a while...
>  Found volume group "VolGroup00" using metadata type lvm2
>Activating logical volumes
>  2 logical volume(s) in volume group "VolGroup00" now active
>Attempting to enter user-space to capture vmcore
>Creating root device.
>Checking root filesystem.
>fsck 1.38 (30-Jun-2005)
>fsck: WARNING: couldn't open /etc/fstab: No such file or directory
>e2fsck 1.38 (30-Jun-2005)
>fsck.ext3: while determining whether /dev/VolGroup00/LogVol00 is mounted.
>/dev/VolGroup00/LogVol00: recovering journal
>/dev/VolGroup00/LogVol00: clean, 82846/17235968 files, 1223073/17227776 blocks
>Mounting root filesystem.
>Trying mount -t ext3 /dev/VolGroup00/LogVol00 /sysroot
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Using ext3 on root filesystem
>Switching to new root and running init.
>audit(1207701008.725:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>audit(1207701008.955:3): policy loaded auid=4294967295 ses=4294967295
>
INIT: version 2.86 booting

>		Welcome to Red Hat Enterprise Linux Server
>		Press 'I' to enter interactive startup.
>Setting clock  (utc): Tue Apr  8 20:30:11 EDT 2008 [  OK  ]

>Starting udev: Disabling IRQ #169
>[  OK  ]

>Loading default keymap (us): [  OK  ]

>Setting hostname hp-dl360g5-02.rhts.boston.redhat.com:  [  OK  ]

>Setting up Logical Volume Management:   2 logical volume(s) in volume group "VolGroup00" now active
>[  OK  ]

>Mounting local filesystems:  [  OK  ]

>Enabling local filesystem quotas:  [  OK  ]

>Enabling /etc/fstab swaps:  [  OK  ]
>
INIT: Entering runlevel: 3

>Entering non-interactive startup
>Applying Intel CPU microcode update: [  OK  ]

>Starting monitoring for VG VolGroup00:   2 logical volume(s) in volume group "VolGroup00" monitored
>[  OK  ]

>Checking for hardware changes [  OK  ]

>Bringing up loopback interface:  [  OK  ]

>Bringing up interface eth0:  
>Determining IP information for eth0... done.
>[  OK  ]

>Starting auditd: [  OK  ]

>Starting restorecond: [  OK  ]

>Starting system logger: [  OK  ]

>Starting kernel logger: [  OK  ]

>Starting irqbalance: [  OK  ]

>Starting mcstransd: [  OK  ]

>Starting portmap: [  OK  ]

>Starting NFS statd: [  OK  ]

>Starting RPC idmapd: [  OK  ]

>+ . /etc/init.d/functions
>++ TEXTDOMAIN=initscripts
>++ umask 022
>++ PATH=/sbin:/usr/sbin:/bin:/usr/bin
>++ export PATH
>++ '[' -z '' ']'
>++ COLUMNS=80
>++ '[' -z '' ']'
>+++ /sbin/consoletype
>++ CONSOLETYPE=serial
>++ '[' -f /etc/sysconfig/i18n -a -z '' ']'
>++ . /etc/profile.d/lang.sh
>+++ sourced=0
>+++ for langfile in /etc/sysconfig/i18n '$HOME/.i18n'
>+++ '[' -f /etc/sysconfig/i18n ']'
>+++ . /etc/sysconfig/i18n
>++++ LANG=en_US.UTF-8
>++++ SYSFONT=latarcyrheb-sun16
>+++ sourced=1
>+++ for langfile in /etc/sysconfig/i18n '$HOME/.i18n'
>+++ '[' -f //.i18n ']'
>+++ '[' -n '' ']'
>+++ '[' 1 = 1 ']'
>+++ '[' -n en_US.UTF-8 ']'
>+++ export LANG
>+++ '[' -n '' ']'
>+++ unset LC_ADDRESS
>+++ '[' -n '' ']'
>+++ unset LC_CTYPE
>+++ '[' -n '' ']'
>+++ unset LC_COLLATE
>+++ '[' -n '' ']'
>+++ unset LC_IDENTIFICATION
>+++ '[' -n '' ']'
>+++ unset LC_MEASUREMENT
>+++ '[' -n '' ']'
>+++ unset LC_MESSAGES
>+++ '[' -n '' ']'
>+++ unset LC_MONETARY
>+++ '[' -n '' ']'
>+++ unset LC_NAME
>+++ '[' -n '' ']'
>+++ unset LC_NUMERIC
>+++ '[' -n '' ']'
>+++ unset LC_PAPER
>+++ '[' -n '' ']'
>+++ unset LC_TELEPHONE
>+++ '[' -n '' ']'
>+++ unset LC_TIME
>+++ '[' -n '' ']'
>+++ unset LC_ALL
>+++ '[' -n '' ']'
>+++ unset LANGUAGE
>+++ '[' -n '' ']'
>+++ unset LINGUAS
>+++ '[' -n '' ']'
>+++ unset _XKB_CHARSET
>++++ /sbin/consoletype
>+++ consoletype=serial
>+++ '[' -n '' ']'
>+++ '[' -n '' ']'
>+++ '[' -n en_US.UTF-8 ']'
>+++ case $LANG in
>+++ '[' linux = linux ']'
>+++ '[' serial = vt ']'
>+++ unset SYSFONTACM SYSFONT
>+++ unset sourced
>+++ unset langfile
>++ '[' -z '' ']'
>++ '[' -f /etc/sysconfig/init ']'
>++ . /etc/sysconfig/init
>+++ BOOTUP=serial
>+++ GRAPHICAL=yes
>+++ RES_COL=60
>+++ MOVE_TO_COL='echo -en \033[60G'
>+++ SETCOLOR_SUCCESS='echo -en \033[0;32m'
>+++ SETCOLOR_FAILURE='echo -en \033[0;31m'
>+++ SETCOLOR_WARNING='echo -en \033[0;33m'
>+++ SETCOLOR_NORMAL='echo -en \033[0;39m'
>+++ LOGLEVEL=3
>+++ PROMPT=yes
>+++ AUTOSWAP=no
>++ '[' serial = serial ']'
>++ BOOTUP=serial
>++ MOVE_TO_COL=
>++ SETCOLOR_SUCCESS=
>++ SETCOLOR_FAILURE=
>++ SETCOLOR_WARNING=
>++ SETCOLOR_NORMAL=
>++ '[' serial '!=' verbose ']'
>++ INITLOG_ARGS=-q
>++ __sed_discard_ignored_files='/$~\|\.bak\|\.orig\|\.rpmnew\|\.rpmorig\|\.rpmsave$$/d'
>+ KEXEC=/sbin/kexec
>+ BOOTDIR=/boot
>+ KDUMP_KERNELVER=
>+ KDUMP_COMMANDLINE=
>+ KEXEC_ARGS=
>+ KDUMP_CONFIG_FILE=/etc/kdump.conf
>+ LOGGER='/usr/bin/logger -p info -t kdump'
>++ uname -m
>+ ARCH=x86_64
>+ standard_kexec_args=-p
>+ '[' -f /etc/sysconfig/kdump ']'
>+ . /etc/sysconfig/kdump
>++ KDUMP_KERNELVER=
>++ KDUMP_COMMANDLINE=
>++ KDUMP_COMMANDLINE_APPEND='irqpoll maxcpus=1 reset_devices'
>++ KEXEC_ARGS=' --args-linux'
>++ KDUMP_BOOTDIR=/boot
>++ KDUMP_IMG=vmlinuz
>++ KDUMP_IMG_EXT=
>+ case "$1" in
>+ '[' -s /proc/vmcore ']'
>+ save_core
>++ date +%Y-%m-%d-%H:%M
>+ coredir=/var/crash/2008-04-08-20:30
>+ mkdir -p /var/crash/2008-04-08-20:30
>+ cp --sparse=always /proc/vmcore /var/crash/2008-04-08-20:30/vmcore-incomplete
>+ exitcode=0
>+ '[' 0 == 0 ']'
>+ mv /var/crash/2008-04-08-20:30/vmcore-incomplete /var/crash/2008-04-08-20:30/vmcore
>+ /usr/bin/logger -p info -t kdump 'saved a vmcore to /var/crash/2008-04-08-20:30'
>+ return 0
>+ run_kdump_post 0
>+ kdumpsuccess=0
>++ grep '^kdump_post' /etc/kdump.conf
>++ cut '-d ' -f2
>+ KDUMP_POST=
>+ '[' -x '' ']'
>+ do_final_action
>++ grep default /etc/kdump.conf
>++ grep -vm1 '^#'
>++ cut '-d ' -f2
>+ FINAL_ACTION=
>+ [[ '' != \h\a\l\t ]]
>+ FINAL_ACTION=reboot
>+ reboot
>+ exit 0
>
INIT: Switching to runlevel: 6

>
INIT: Sending processes the TERM signal

>Starting system message bus: Stopping RPC idmapd: [  OK  ]

>[  OK  ]

>Stopping NFS statd: [  OK  ]

>Stopping mcstransd: [  OK  ]

>Stopping portmap: [  OK  ]

>Shutting down restorecond: [  OK  ]

>Stopping auditd: audit(1207701048.237:6): audit_pid=0 old=2807 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>[  OK  ]

>Shutting down kernel logger: [  OK  ]

>Shutting down system logger: [  OK  ]

>Shutting down interface eth0:  [  OK  ]

>Shutting down loopback interface:  [  OK  ]

>Starting killall:  Stopping system message bus: [  OK  ]

>[  OK  ]

>Sending all processes the TERM signal... 
>Sending all processes the KILL signal... 
>Saving random seed:  
>Syncing hardware clock to system time audit(1207701055.999:7): user pid=3405 uid=0 auid=4294967295 subj=system_u:system_r:hwclock_t:s0 msg='changing system time: exe="/sbin/hwclock" (hostname=?, addr=?, terminal=console res=success)'
>
>Turning off swap:  
>Turning off quotas:  
>Unmounting pipe file systems:  
>Unmounting file systems:  
>umount2: Invalid argument
>umount: /dev/pts: not mounted
>Please stand by while rebooting the system...
>md: stopping all md devices.
>Completed flushing cache on controller 0
>Restarting system.
>.

Actions: View

Attachments on bug 458013: 313527 | 313610 | 314083 | 314085 | 314086 | 314088