Attachment 314285 Details for Bug 451586 – kernel panic still exists with kernel -102.el5.bz451586.2

kernel panic still exists with kernel -102.el5.bz451586.2

SATA_HDD_ODD_x86_64_bz451586.2.txt (text/plain), 20.92 KB, created by Shane Huang on 2008-08-14 07:18:01 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Shane Huang

Created: 2008-08-14 07:18:01 UTC

Size: 20.92 KB

patch

obsolete

>Linux version 2.6.18-102.el5.bz451586.2 (brewbuilder@hs20-bc2-2.build.redhat.com) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-41)) #1 SMP Wed Aug 13 12:02:00 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002fe90000 (usable)
> BIOS-e820: 000000002fe90000 - 000000002fe9e000 (ACPI data)
> BIOS-e820: 000000002fe9e000 - 000000002fee0000 (ACPI NVS)
> BIOS-e820: 000000002fee0000 - 000000002feee000 (reserved)
> BIOS-e820: 000000002fef0000 - 000000002ff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>766MB LOWMEM available.
>found SMP MP-table at 000ff780
>Memory for crash kernel (0x0 to 0x0) notwithin permissible range
>disabling kdump
>Using x86 segment limits to approximate NX protection
>DMI present.
>Using APIC driver default
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x808
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:11 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:11 APIC version 16
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8300 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 2ff00000:b0100000)
>Detected 2100.139 MHz processor.
>Built 1 zonelists.  Total pages: 196240
>Kernel command line: ro root=LABEL=/12 console=ttyS0,115200
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c074b000 soft=c072b000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 770924k/784960k available (2096k kernel code, 13400k reserved, 877k data, 224k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>hpet0: at MMIO 0xfed00000 (virtual 0xf0800000), IRQs 2, 8, 0, 0
>hpet0: 4 32-bit timers, 14318180 Hz
>Using HPET for base-timer
>Calibrating delay using timer specific routine.. 4202.47 BogoMIPS (lpj=2101238)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0(2) -> Core 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c074c000 soft=c072c000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4199.82 BogoMIPS (lpj=2099914)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1(2) -> Core 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01
>Total of 2 processors activated (8402.30 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: 
>CPU#0 had -178 usecs TSC skew, fixed it up.
>CPU#1 had 178 usecs TSC skew, fixed it up.
>Brought up 2 CPUs
>migration_cost=200
>checking if image is initramfs... it is
>Freeing initrd memory: 2338k freed
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>Error attaching device data
>Error attaching device data
>Error attaching device data
>Error attaching device data
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 15 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:09: ioport range 0xe00-0xe0f has been reserved
>pnp: 00:09: ioport range 0xe80-0xe8f has been reserved
>pnp: 00:09: ioport range 0xf40-0xf4f has been reserved
>pnp: 00:09: ioport range 0xa30-0xa3f has been reserved
>PCI: Ignore bogus resource 6 [0:0] of 0000:01:05.0
>PCI: Bridge: 0000:00:01.0
>  IO window: e000-efff
>  MEM window: fe900000-feafffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:0a.0
>  IO window: disabled.
>  MEM window: feb00000-febfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:14.4
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 169
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1218724044.007:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key D1529EB0238425C7
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Detected use of extended apic ids on hypertransport bus
>assign_interrupt_mode Found MSI capability
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [P001] (supports 8 throttling states)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ATIIXP: IDE controller at PCI slot 0000:00:14.1
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 193
>ATIIXP: chipset revision 0
>ATIIXP: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:pio, hdd:pio
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PSKE,PNP0f03:PSMS] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ processors (2 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0xd (2100 MHz), vid 0xa
>powernow-k8:    1 : fid 0xc (2000 MHz), vid 0xb
>powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xd
>powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
>Using IPI No-Shortcut mode
>Time: hpet clocksource has been installed.
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 224k freed
>Write protecting the kernel read-only data: 393k
>Red Hat nash version 5.1.19.6 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Setting up hotplug.
>Creating block device nodes.
>Loading uhci-hcd.ko module
>USB Universal Host Controller Interface driver v3.0
>Loading ohci-hcd.ko module
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 193
>ohci_hcd 0000:00:12.0: OHCI Host Controller
>ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:12.0: irq 193, io mem 0xfe8fe000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:12.1[A] -> GSI 16 (level, low) -> IRQ 193
>ohci_hcd 0000:00:12.1: OHCI Host Controller
>ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:12.1: irq 193, io mem 0xfe8fd000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 169
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.0: irq 169, io mem 0xfe8fc000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 18 (level, low) -> IRQ 169
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.1: irq 169, io mem 0xfe8f7000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:14.5[C] -> GSI 18 (level, low) -> IRQ 169
>ohci_hcd 0000:00:14.5: OHCI Host Controller
>ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:14.5: irq 169, io mem 0xfe8f5000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>Loading ehci-hcd.ko module
>ACPI: PCI Interrupt 0000:00:12.2[B] -> GSI 17 (level, low) -> IRQ 201
>ehci_hcd 0000:00:12.2: EHCI Host Controller
>ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:12.2: debug port 1
>ehci_hcd 0000:00:12.2: irq 201, io mem 0xfe8ff000
>ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb 4-2: new low speed USB device using ohci_hcd and address 2
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 6 ports detected
>ACPI: PCI Interrupt 0000:00:13.2[B] -> GSI 19 (level, low) -> IRQ 209
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:13.2: debug port 1
>ehci_hcd 0000:00:13.2: irq 209, io mem 0xfe8f6800
>usb 4-2: configuration #1 chosen from 1 choice
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>usb 4-2: USB disconnect, address 2
>Loading jbd.ko module
>Loading ext3.ko module
>Loading scsi_mod.ko module
>SCSI subsystem initialized
>Loading sd_mod.ko module
>Loading libata.ko module
>Loading ahci.ko module
>ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 22 (level, low) -> IRQ 217
>usb 4-2: new low speed USB device using ohci_hcd and address 3
>usb 4-2: configuration #1 chosen from 1 choice
>input: Microsoft Basic Optical Mouse as /class/input/input0
>input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:13.1-2
>usb 4-3: new low speed USB device using ohci_hcd and address 4
>ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ff900 irq 217
>ata2: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ff980 irq 217
>ata3: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ffa00 irq 217
>ata4: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ffa80 irq 217
>usb 4-3: configuration #1 chosen from 1 choice
>input: Logitech Logitech USB Keyboard as /class/input/input1
>input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:13.1-3
>ata1: SATA link down (SStatus 0 SControl 300)
>ata2: SATA link down (SStatus 0 SControl 300)
>ata3: softreset failed (device not ready)
>ata3: failed due to HW bug, retry pmp=0
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATAPI: PIONEER DVD-RW  DVR-215, 1.13, max UDMA/66
>ata3.00: configured for UDMA/66
>ata4: softreset failed (device not ready)
>ata4: failed due to HW bug, retry pmp=0
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: HPA detected: current 156299375, native 156301488
>ata4.00: ATA-7: ST3802110AS, 3.AAE, max UDMA/133
>ata4.00: 156299375 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata4.00: configured for UDMA/133
>  Vendor: PIONEER   Model: DVD-RW  DVR-215   Rev: 1.13
>  Type:   CD-ROM                             ANSI SCSI revision: 05
>  Vendor: ATA       Model: ST3802110AS       Rev: 3.AA
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 156299375 512-byte hdwr sectors (80025 MB)
>sda: Write Protect is off
>SCSI device sda: drive cache: write back
>SCSI device sda: 156299375 512-byte hdwr sectors (80025 MB)
>sda: Write Protect is off
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 > sda3 sda4
>sd 3:0:0:0: Attached scsi disk sda
>Waiting for driver initialization.
>Scanning and configuring dmraid supported devices
>Trying to resume from /dev/sda7
>No suspend signature on swap, not resuming.
>Creating root device.
>Mounting root filesystem.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Setting up other filesystems.
>Setting up new root fs
>no fstab.sys, mounting internal defaults
>Switching to new root and running init.
>unmounting old /dev
>unmounting old /proc
>unmounting old /sys
>SELinux:  Disabled at runtime.
>type=1404 audit(1218724055.647:2): selinux=0 auid=4294967295 ses=4294967295
>
INIT: version 2.86 booting

>		Welcome to Red Hat Enterprise Linux Client
>		Press 'I' to enter interactive startup.
>Setting clock  (localtime): Thu Aug 14 14:27:37 CST 2008 [  OK  ]

>Starting udev: BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000
> printing eip:
>*pde = 00000000
>Oops: 0002 [#1]
>SMP 
>last sysfs file: /devices/pci0000:00/0000:00:14.5/usb5/5-0:1.0/usbdev5.1_ep81/dev
>Modules linked in: snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device sr_mod cdrom snd_pcm_oss k8_edac edac_mc k8temp pcspkr snd_hda_intel hwmon sg i2c_piix4 snd_mixer_oss i2c_core tg3 serio_raw snd_pcm snd_timer snd_page_alloc snd_hwdep snd soundcore ahci libata sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd
>CPU:    1
>EIP:    0060:[<f08f1510>]    Not tainted VLI
>EFLAGS: 00010046   (2.6.18-102.el5.bz451586.2 #1) 
>EIP is at ata_qc_issue+0x1cb/0x4e0 [libata]
>eax: ef5758ac   ebx: ef5740f8   ecx: ef574000   edx: edf0b4c0
>esi: 00000000   edi: 00000000   ebp: ef57407c   esp: ee84db54
>ds: 007b   es: 007b   ss: 0068
>Process scsi_id (pid: 1305, ti=ee84d000 task=ee84c550 task.ti=ee84d000)
>Stack: ef574000 ef575788 edf0b4c0 ef5740f8 edf0b4c0 ef574000 00000001 00000000 
>       00000000 ef57407c 00000000 ef5758ac f087b4f7 f08f58f8 ef574000 ef5758ac 
>       ef419940 f087b4f7 ef574000 f08f7f33 f08f5d10 ef418800 ef419940 ef418800 
>Call Trace:
> [<f087b4f7>] scsi_done+0x0/0x16 [scsi_mod]
> [<f08f58f8>] ata_scsi_translate+0x107/0x12c [libata]
> [<f087b4f7>] scsi_done+0x0/0x16 [scsi_mod]
> [<f08f7f33>] ata_scsi_queuecmd+0x18f/0x1ac [libata]
> [<f08f5d10>] atapi_xlat+0x0/0x11e [libata]
> [<f087ba76>] scsi_dispatch_cmd+0x208/0x281 [scsi_mod]
> [<f0880258>] scsi_request_fn+0x247/0x2f9 [scsi_mod]
> [<c04d691f>] elv_insert+0xc8/0x1ad
> [<c04d8ee5>] blk_execute_rq_nowait+0x6d/0x84
> [<c04d8f72>] blk_execute_rq+0x76/0x97
> [<c04d8623>] blk_end_sync_rq+0x0/0x1d
> [<c04d779d>] blk_rq_bio_prep+0x61/0x7c
> [<c04dc2b8>] sg_io+0x253/0x338
> [<c04dc7e7>] scsi_cmd_ioctl+0x1b9/0x366
> [<f09bffe4>] cdrom_open+0x833/0x876 [cdrom]
> [<c04868cc>] alloc_inode+0xde/0x166
> [<c045b2b6>] __do_page_cache_readahead+0x8b/0x1c6
> [<c060a8d3>] do_page_fault+0x20a/0x4b8
> [<f09beca3>] cdrom_ioctl+0x22/0xb30 [cdrom]
> [<c04854de>] dput+0x22/0xed
> [<c047e919>] __link_path_walk+0xbfa/0xd33
> [<f09a2c8d>] sr_block_ioctl+0x41/0x74 [sr_mod]
> [<c04dab33>] blkdev_driver_ioctl+0x4b/0x5b
> [<c04db15a>] blkdev_ioctl+0x617/0x665
> [<c04e324e>] kobject_get+0xf/0x13
> [<c04db61b>] get_disk+0x35/0x6e
> [<c04e324e>] kobject_get+0xf/0x13
> [<f09a233f>] sr_block_open+0x74/0x81 [sr_mod]
> [<c0478013>] do_open+0x211/0x2cc
> [<c047823a>] blkdev_open+0x0/0x44
> [<c0478256>] blkdev_open+0x1c/0x44
> [<c046fe52>] __dentry_open+0xea/0x1ab
> [<c046ff77>] nameidata_to_filp+0x19/0x28
> [<c046ffb1>] do_filp_open+0x2b/0x31
> [<c0467578>] free_pages_and_swap_cache+0x6b/0x7f
> [<c047788c>] block_ioctl+0x13/0x16
> [<c0477879>] block_ioctl+0x0/0x16
> [<c04808f4>] do_ioctl+0x1c/0x5d
> [<c0480b7f>] vfs_ioctl+0x24a/0x25c
> [<c0480bd9>] sys_ioctl+0x48/0x5f
> [<c0404f17>] syscall_call+0x7/0xb
> =======================
>Code: 24 03 74 27 e8 3b 46 b3 cf 50 68 17 06 90 f0 68 c5 11 00 00 68 b9 13 90 f0 68 d3 13 90 f0 e8 4a 52 b3 cf e8 33 51 b1 cf 83 c4 14 <c7> 07 00 00 00 00 8b 44 24 10 8b 1d 10 eb 7a c0 8b 50 04 03 50 
>EIP: [<f08f1510>] ata_qc_issue+0x1cb/0x4e0 [libata] SS:ESP 0068:ee84db54
> <0>Kernel panic - not syncing: Fatal exception
> BUG: warning at arch/i386/kernel/smp.c:550/smp_call_function() (Not tainted)
> [<c0417ad4>] stop_this_cpu+0x0/0x33
> [<c04178c3>] smp_call_function+0x57/0xc3
> [<c042676a>] printk+0x18/0x8e
> [<c0417942>] smp_send_stop+0x13/0x1c
> [<c0425d3b>] panic+0x4c/0x16d
> [<c04064f5>] die+0x25d/0x291
> [<c060aab3>] do_page_fault+0x3ea/0x4b8
> [<c041efc2>] find_busiest_group+0x177/0x462
> [<c060a6c9>] do_page_fault+0x0/0x4b8
> [<c0405a89>] error_code+0x39/0x40
> [<f08f1510>] ata_qc_issue+0x1cb/0x4e0 [libata]
> [<f087b4f7>] scsi_done+0x0/0x16 [scsi_mod]
> [<f08f58f8>] ata_scsi_translate+0x107/0x12c [libata]
> [<f087b4f7>] scsi_done+0x0/0x16 [scsi_mod]
> [<f08f7f33>] ata_scsi_queuecmd+0x18f/0x1ac [libata]
> [<f08f5d10>] atapi_xlat+0x0/0x11e [libata]
> [<f087ba76>] scsi_dispatch_cmd+0x208/0x281 [scsi_mod]
> [<f0880258>] scsi_request_fn+0x247/0x2f9 [scsi_mod]
> [<c04d691f>] elv_insert+0xc8/0x1ad
> [<c04d8ee5>] blk_execute_rq_nowait+0x6d/0x84
> [<c04d8f72>] blk_execute_rq+0x76/0x97
> [<c04d8623>] blk_end_sync_rq+0x0/0x1d
> [<c04d779d>] blk_rq_bio_prep+0x61/0x7c
> [<c04dc2b8>] sg_io+0x253/0x338
> [<c04dc7e7>] scsi_cmd_ioctl+0x1b9/0x366
> [<f09bffe4>] cdrom_open+0x833/0x876 [cdrom]
> [<c04868cc>] alloc_inode+0xde/0x166
> [<c045b2b6>] __do_page_cache_readahead+0x8b/0x1c6
> [<c060a8d3>] do_page_fault+0x20a/0x4b8
> [<f09beca3>] cdrom_ioctl+0x22/0xb30 [cdrom]
> [<c04854de>] dput+0x22/0xed
> [<c047e919>] __link_path_walk+0xbfa/0xd33
> [<f09a2c8d>] sr_block_ioctl+0x41/0x74 [sr_mod]
> [<c04dab33>] blkdev_driver_ioctl+0x4b/0x5b
> [<c04db15a>] blkdev_ioctl+0x617/0x665
> [<c04e324e>] kobject_get+0xf/0x13
> [<c04db61b>] get_disk+0x35/0x6e
> [<c04e324e>] kobject_get+0xf/0x13
> [<f09a233f>] sr_block_open+0x74/0x81 [sr_mod]
> [<c0478013>] do_open+0x211/0x2cc
> [<c047823a>] blkdev_open+0x0/0x44
> [<c0478256>] blkdev_open+0x1c/0x44
> [<c046fe52>] __dentry_open+0xea/0x1ab
> [<c046ff77>] nameidata_to_filp+0x19/0x28
> [<c046ffb1>] do_filp_open+0x2b/0x31
> [<c0467578>] free_pages_and_swap_cache+0x6b/0x7f
> [<c047788c>] block_ioctl+0x13/0x16
> [<c0477879>] block_ioctl+0x0/0x16
> [<c04808f4>] do_ioctl+0x1c/0x5d
> [<c0480b7f>] vfs_ioctl+0x24a/0x25c
> [<c0480bd9>] sys_ioctl+0x48/0x5f
> [<c0404f17>] syscall_call+0x7/0xb
> =======================

Actions: View

Attachments on bug 451586: 309434 | 314171 | 314172 | 314174 | 314285 | 314369 | 314371