Attachment 314369 Details for Bug 451586 – More debug info with kernel -102.el5.bz451586.3 x86_64

More debug info with kernel -102.el5.bz451586.3 x86_64

SATA_HDD_ODD_x86_64_bz451586.3.txt (text/plain), 19.70 KB, created by Shane Huang on 2008-08-15 01:40:53 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Shane Huang

Created: 2008-08-15 01:40:53 UTC

Size: 19.70 KB

patch

obsolete

>Linux version 2.6.18-102.el5.bz451586.3 (brewbuilder@hs20-bc1-5.build.redhat.com) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-41)) #1 SMP Thu Aug 14 15:05:08 EDT 2008
>Command line: ro root=LABEL=/123 console=ttyS0,115200
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002fe90000 (usable)
> BIOS-e820: 000000002fe90000 - 000000002fe9e000 (ACPI data)
> BIOS-e820: 000000002fe9e000 - 000000002fee0000 (ACPI NVS)
> BIOS-e820: 000000002fee0000 - 000000002feee000 (reserved)
> BIOS-e820: 000000002fef0000 - 000000002ff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
>DMI present.
>Scanning NUMA topology in Northbridge 24
>Number of nodes 1
>Node 0 MemBase 0000000000000000 Limit 000000002fe90000
>Using node hash shift of 63
>Bootmem setup node 0 0000000000000000-000000002fe90000
>Memory for crash kernel (0x0 to 0x0) notwithin permissible range
>disabling kdump
>ACPI: PM-Timer IO Port: 0x808
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:11 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:11 APIC version 16
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>Setting APIC routing to physical flat
>ACPI: HPET id: 0x8300 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000e4000
>Nosave address range: 00000000000e4000 - 0000000000100000
>Allocating PCI resources starting at 30000000 (gap: 2ff00000:b0100000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>Built 1 zonelists.  Total pages: 192212
>Kernel command line: ro root=LABEL=/123 console=ttyS0,115200
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Checking aperture...
>CPU 0: aperture @ fbc000000 size 32 MB
>Aperture too small (32 MB)
>No AGP bridge found
>Memory: 764404k/784960k available (2460k kernel code, 20168k reserved, 1251k data, 196k init)
>Calibrating delay using timer specific routine.. 4204.08 BogoMIPS (lpj=2102043)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>result 12500595
>Detected 12.500 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4199.90 BogoMIPS (lpj=2099952)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01
>CPU 1: Syncing TSC to CPU 0.
>CPU 1: synchronized TSC with CPU 0 (last diff 2 cycles, maxerr 536 cycles)
>Brought up 2 CPUs
>testing NMI watchdog ... OK.
>time.c: Using 14.317320 MHz WALL HPET GTOD HPET timer.
>time.c: Detected 2100.097 MHz processor.
>migration_cost=644
>checking if image is initramfs... it is
>Freeing initrd memory: 2409k freed
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>Error attaching device data
>Error attaching device data
>Error attaching device data
>Error attaching device data
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 15 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0
>hpet0: 4 32-bit timers, 14318180 Hz
>PCI-DMA: Disabling IOMMU.
>pnp: 00:09: ioport range 0xe00-0xe0f has been reserved
>pnp: 00:09: ioport range 0xe80-0xe8f has been reserved
>pnp: 00:09: ioport range 0xf40-0xf4f has been reserved
>pnp: 00:09: ioport range 0xa30-0xa3f has been reserved
>PCI: Ignore bogus resource 6 [0:0] of 0000:01:05.0
>PCI: Bridge: 0000:00:01.0
>  IO window: e000-efff
>  MEM window: fe900000-feafffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:0a.0
>  IO window: disabled.
>  MEM window: feb00000-febfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:14.4
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 169
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>type=2000 audit(1218792928.614:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key C24807117593CE53
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Detected use of extended apic ids on hypertransport bus
>assign_interrupt_mode Found MSI capability
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [P001] (supports 8 throttling states)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ATIIXP: IDE controller at PCI slot 0000:00:14.1
>GSI 17 sharing vector 0xC1 and IRQ 17
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 193
>ATIIXP: chipset revision 0
>ATIIXP: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:pio, hdd:pio
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PSKE,PNP0f03:PSMS] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ processors (2 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0xd (2100 MHz), vid 0xa
>powernow-k8:    1 : fid 0xc (2000 MHz), vid 0xb
>powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xd
>powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 196k freed
>Write protecting the kernel read-only data: 476k
>Red Hat nash version 5.1.19.6 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Setting up hotplug.
>Creating block device nodes.
>Loading uhci-hcd.kUSB Universal Host Controller Interface driver v3.0
>o module
>Loading ohci-hcd.ko module
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 193
>ohci_hcd 0000:00:12.0: OHCI Host Controller
>ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:12.0: irq 193, io mem 0xfe8fe000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:12.1[A] -> GSI 16 (level, low) -> IRQ 193
>ohci_hcd 0000:00:12.1: OHCI Host Controller
>ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:12.1: irq 193, io mem 0xfe8fd000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 169
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.0: irq 169, io mem 0xfe8fc000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 18 (level, low) -> IRQ 169
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.1: irq 169, io mem 0xfe8f7000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:14.5[C] -> GSI 18 (level, low) -> IRQ 169
>ohci_hcd 0000:00:14.5: OHCI Host Controller
>ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:14.5: irq 169, io mem 0xfe8f5000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>Loading ehci-hcd.ko module
>GSI 18 sharing vector 0xC9 and IRQ 18
>ACPI: PCI Interrupt 0000:00:12.2[B] -> GSI 17 (level, low) -> IRQ 201
>ehci_hcd 0000:00:12.2: EHCI Host Controller
>ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:12.2: debug port 1
>ehci_hcd 0000:00:12.2: irq 201, io mem 0xfe8ff000
>ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb 4-2: new low speed USB device using ohci_hcd and address 2
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 6 ports detected
>GSI 19 sharing vector 0xD1 and IRQ 19
>ACPI: PCI Interrupt 0000:00:13.2[B] -> GSI 19 (level, low) -> IRQ 209
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:13.2: debug port 1
>ehci_hcd 0000:00:13.2: irq 209, io mem 0xfe8f6800
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>Loading jbd.ko module
>Loading ext3.ko module
>Loading scsi_mod.ko module
>SCSI subsystem initialized
>Loading sd_mod.ko module
>Loading libata.ko module
>Loading ahci.ko module
>GSI 20 sharing vector 0xD9 and IRQ 20
>ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 22 (level, low) -> IRQ 217
>AHCI_INIT_ONE: hpriv->cap 0xf722ff83 hpriv->port_map 0xf
>AHCI_INIT_ONE: ahci_nr_ports(hpriv->cap) 4
>AHCI_INIT_ONE: fls(hpriv->port_map) 4
>AHCI_INIT_ONE: n_ports 4
>ATA_HOST_ALLOC_PINFO: n_ports 4
>ATA_HOST_ALLOC: host->n_ports 4
>ATA_HOST_ALLOC: i 0 ata_port_alloc
>ATA_PORT_ALLOC
>ATA_LINK_INIT
>ATA_LINK_INIT i 0 dev 0x2f29e528
>ATA_LINK_INIT i 1 dev 0x2f29e9b0
>ATA_HOST_ALLOC: i 1 ata_port_alloc
>ATA_PORT_ALLOC
>ATA_LINK_INIT
>ATA_LINK_INIT i 0 dev 0x2e88a528
>ATA_LINK_INIT i 1 dev 0x2e88a9b0
>ATA_HOST_ALLOC: i 2 ata_port_alloc
>ATA_PORT_ALLOC
>ATA_LINK_INIT
>ATA_LINK_INIT i 0 dev 0x2e886528
>ATA_LINK_INIT i 1 dev 0x2e8869b0
>ATA_HOST_ALLOC: i 3 ata_port_alloc
>ATA_PORT_ALLOC
>ATA_LINK_INIT
>ATA_LINK_INIT i 0 dev 0x2e912528
>ATA_LINK_INIT i 1 dev 0x2e9129b0
>usb 4-2: device not accepting address 2, error -110
>usb 4-2: new low speed USB device using ohci_hcd and address 4
>ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ff900 irq 217
>ata2: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ff980 irq 217
>ata3: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ffa00 irq 217
>ata4: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ffa80 irq 217
>usb 4-2: configuration #1 chosen from 1 choice
>input: Microsoft Basic Optical Mouse as /class/input/input0
>input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:13.1-2
>usb 4-3: new low speed USB device using ohci_hcd and address 5
>ata1: SATA link down (SStatus 0 SControl 300)
>usb 4-3: configuration #1 chosen from 1 choice
>input: Logitech Logitech USB Keyboard as /class/input/input1
>input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:13.1-3
>ata2: SATA link down (SStatus 0 SControl 300)
>ata3: softreset failed (device not ready)
>ata3: failed due to HW bug, retry pmp=0
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATAPI: PIONEER DVD-RW  DVR-215, 1.13, max UDMA/66
>ata3.00: configured for UDMA/66
>ata4: softreset failed (device not ready)
>ata4: failed due to HW bug, retry pmp=0
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: HPA detected: current 156299375, native 156301488
>ata4.00: ATA-7: ST3802110AS, 3.AAE, max UDMA/133
>ata4.00: 156299375 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata4.00: configured for UDMA/133
>  Vendor: PIONEER   Model: DVD-RW  DVR-215   Rev: 1.13
>  Type:   CD-ROM                             ANSI SCSI revision: 05
>  Vendor: ATA       Model: ST3802110AS       Rev: 3.AA
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 156299375 512-byte hdwr sectors (80025 MB)
>sda: Write Protect is off
>SCSI device sda: drive cache: write back
>SCSI device sda: 156299375 512-byte hdwr sectors (80025 MB)
>sda: Write Protect is off
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 > sda3 sda4
>sd 3:0:0:0: Attached scsi disk sda
>Waiting for driver initialization.
>Scanning and configuring dmraid supported devices
>Trying to resume from /dev/sda7
>No suspend signature on swap, not resuming.
>Creating root device.
>Mounting root filesystem.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Setting up other filesystems.
>Setting up new root fs
>no fstab.sys, mounting internal defaults
>Switching to new root and running init.
>unmounting old /dev
>unmounting old /proc
>unmounting old /sys
>SELinux:  Disabled at runtime.
>type=1404 audit(1218792940.383:2): selinux=0 auid=4294967295 ses=4294967295
>
INIT: version 2.86 booting

>		Welcome to Red Hat Enterprise Linux Client
>		Press 'I' to enter interactive startup.
>Setting clock  (localtime): Fri Aug 15 09:35:43 CST 2008 [  OK  ]

>Starting udev: Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: 
> [<ffffffff880b6869>] :libata:ata_qc_issue+0x225/0x5e7
>PGD 2b6c5067 PUD 2c41d067 PMD 0 
>Oops: 0002 [1] SMP 
>last sysfs file: /class/usb_device/usbdev6.1/dev
>CPU 0 
>Modules linked in: snd_hda_intel shpchp snd_seq_dummy snd_seq_oss snd_seq_midi_event sr_mod snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss cdrom snd_pcm snd_timer snd_page_alloc snd_hwdep k8_edac snd edac_mc i2c_piix4 soundcore sg tg3 i2c_core k8temp pcspkr serio_raw hwmon ahci libata sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd
>Pid: 1408, comm: scsi_id Not tainted 2.6.18-102.el5.bz451586.3 #1
>RIP: 0010:[<ffffffff880b6869>]  [<ffffffff880b6869>] :libata:ata_qc_issue+0x225/0x5e7
>RSP: 0018:ffff81002d1d18e8  EFLAGS: 00010046
>RAX: ffff81002e886528 RBX: ffff81002f8faac0 RCX: ffff81002e884000
>RDX: ffff81002f8faac0 RSI: ffff81002ed972a2 RDI: ffff81002e8840e0
>RBP: ffff81002e8840e0 R08: ffff81002ed82840 R09: ffff81002e886528
>R10: ffff81002fc5e660 R11: 0000000000000010 R12: 0000000000000000
>R13: ffff81002e884190 R14: ffff81002e884000 R15: ffff81002e8863f0
>FS:  000000001d732850(0063) GS:ffffffff803a0000(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>CR2: 0000000000000000 CR3: 000000002cdc1000 CR4: 00000000000006e0
>Process scsi_id (pid: 1408, threadinfo ffff81002d1d0000, task ffff81002c13d820)
>Stack:  ffffffff8009ded6 ffff81002f8faac0 ffff81002e884000 ffffffff880bbb05
> 0000000000000220 ffff81002e8840e0 0000000000000000 ffff81002e886528
> ffffffff880755cb ffffffff880bba7c ffff81002e884000 ffffffff880bb0d3
>Call Trace:
> [<ffffffff8009ded6>] keventd_create_kthread+0x0/0xc4
> [<ffffffff880bbb05>] :libata:atapi_xlat+0x89/0xfa
> [<ffffffff880755cb>] :scsi_mod:scsi_done+0x0/0x18
> [<ffffffff880bba7c>] :libata:atapi_xlat+0x0/0xfa
> [<ffffffff880bb0d3>] :libata:ata_scsi_translate+0x140/0x16d
> [<ffffffff880755cb>] :scsi_mod:scsi_done+0x0/0x18
> [<ffffffff880bdb40>] :libata:ata_scsi_queuecmd+0x1b4/0x1d4
> [<ffffffff88075c74>] :scsi_mod:scsi_dispatch_cmd+0x26e/0x2ff
> [<ffffffff8807b0c4>] :scsi_mod:scsi_request_fn+0x2c1/0x390
> [<ffffffff801382a5>] elv_insert+0xd6/0x1f7
> [<ffffffff80139b65>] blk_execute_rq_nowait+0x7e/0x9a
> [<ffffffff80139c11>] blk_execute_rq+0x90/0xc0
> [<ffffffff8013ce47>] sg_io+0x235/0x333
> [<ffffffff882582b1>] :sr_mod:sr_media_change+0x1cc/0x1f6
> [<ffffffff8013d3cc>] scsi_cmd_ioctl+0x1d2/0x3b5
> [<ffffffff800dc998>] check_disk_change+0x2b/0x76
> [<ffffffff8820533b>] :cdrom:cdrom_open+0x8ef/0x93c
> [<ffffffff8000cbe1>] do_lookup+0x65/0x1d4
> [<ffffffff88203d71>] :cdrom:cdrom_ioctl+0x31/0xc18
> [<ffffffff8000e894>] link_path_walk+0xd3/0xe5
> [<ffffffff88258e36>] :sr_mod:sr_block_ioctl+0x46/0x78
> [<ffffffff8013b3d0>] blkdev_driver_ioctl+0x5d/0x72
> [<ffffffff8013ba24>] blkdev_ioctl+0x63f/0x69a
> [<ffffffff800dd173>] do_open+0x250/0x30f
> [<ffffffff800dcf1b>] bdget+0x103/0x10b
> [<ffffffff800dd486>] blkdev_open+0x0/0x4f
> [<ffffffff800dd4a9>] blkdev_open+0x23/0x4f
> [<ffffffff8001e46b>] __dentry_open+0x101/0x1dc
> [<ffffffff800dc8fd>] block_ioctl+0x1b/0x1f
> [<ffffffff80041b48>] do_ioctl+0x21/0x6b
> [<ffffffff8003001d>] vfs_ioctl+0x248/0x261
> [<ffffffff8004bfa7>] sys_ioctl+0x59/0x78
> [<ffffffff8005d116>] system_call+0x7e/0x83
>
>
>Code: 41 c7 04 24 00 00 00 00 48 8b 13 31 ff 8b 73 08 03 73 0c 2b 
>RIP  [<ffffffff880b6869>] :libata:ata_qc_issue+0x225/0x5e7
> RSP <ffff81002d1d18e8>
>CR2: 0000000000000000
> <0>Kernel panic - not syncing: Fatal exception
>

Actions: View

Attachments on bug 451586: 309434 | 314171 | 314172 | 314174 | 314285 | 314369 | 314371