Attachment 314371 Details for Bug 451586 – More debug info with kernel -102.el5.bz451586.2

More debug info with kernel -102.el5.bz451586.2

SATA_HDD_ODD_x86_64_bz451586.2_dbg.txt (text/plain), 157.52 KB, created by Shane Huang on 2008-08-15 03:15:58 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Shane Huang

Created: 2008-08-15 03:15:58 UTC

Size: 157.52 KB

patch

obsolete

>Linux version 2.6.18-102dbg.2 (root@pcp028219pcs.amd.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Fri Aug 15 10:37:46 CST 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002fe90000 (usable)
> BIOS-e820: 000000002fe90000 - 000000002fe9e000 (ACPI data)
> BIOS-e820: 000000002fe9e000 - 000000002fee0000 (ACPI NVS)
> BIOS-e820: 000000002fee0000 - 000000002feee000 (reserved)
> BIOS-e820: 000000002fef0000 - 000000002ff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>766MB LOWMEM available.
>found SMP MP-table at 000ff780
>Memory for crash kernel (0x0 to 0x0) notwithin permissible range
>disabling kdump
>Using x86 segment limits to approximate NX protection
>DMI present.
>Using APIC driver default
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x808
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:11 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:11 APIC version 16
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8300 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 2ff00000:b0100000)
>Detected 2100.220 MHz processor.
>Built 1 zonelists.  Total pages: 196240
>Kernel command line: ro root=LABEL=/12 console=ttyS0,115200
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c074c000 soft=c072c000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 770920k/784960k available (2098k kernel code, 13408k reserved, 876k data, 228k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>hpet0: at MMIO 0xfed00000 (virtual 0xf0800000), IRQs 2, 8, 0, 0
>hpet0: 4 32-bit timers, 14318180 Hz
>Using HPET for base-timer
>Calibrating delay using timer specific routine.. 4202.45 BogoMIPS (lpj=2101225)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0(2) -> Core 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c074d000 soft=c072d000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4199.62 BogoMIPS (lpj=2099812)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1(2) -> Core 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01
>Total of 2 processors activated (8402.07 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: 
>CPU#0 had -180 usecs TSC skew, fixed it up.
>CPU#1 had 180 usecs TSC skew, fixed it up.
>Brought up 2 CPUs
>migration_cost=174
>checking if image is initramfs... it is
>Freeing initrd memory: 2342k freed
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>Error attaching device data
>Error attaching device data
>Error attaching device data
>Error attaching device data
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 15 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:09: ioport range 0xe00-0xe0f has been reserved
>pnp: 00:09: ioport range 0xe80-0xe8f has been reserved
>pnp: 00:09: ioport range 0xf40-0xf4f has been reserved
>pnp: 00:09: ioport range 0xa30-0xa3f has been reserved
>PCI: Ignore bogus resource 6 [0:0] of 0000:01:05.0
>PCI: Bridge: 0000:00:01.0
>  IO window: e000-efff
>  MEM window: fe900000-feafffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:0a.0
>  IO window: disabled.
>  MEM window: feb00000-febfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:14.4
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 169
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1218798492.964:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Detected use of extended apic ids on hypertransport bus
>assign_interrupt_mode Found MSI capability
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [P001] (supports 8 throttling states)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ATIIXP: IDE controller at PCI slot 0000:00:14.1
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 193
>ATIIXP: chipset revision 0
>ATIIXP: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:pio, hdd:pio
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PSKE,PNP0f03:PSMS] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ processors (2 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0xd (2100 MHz), vid 0xa
>powernow-k8:    1 : fid 0xc (2000 MHz), vid 0xb
>powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xd
>powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
>Using IPI No-Shortcut mode
>ACPI: (supports<6>Time: hpet clocksource has been installed.
> S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 228k freed
>Write protecting the kernel read-only data: 393k
>Red Hat nash version 5.1.19.6 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Setting up hotplug.
>Creating block device nodes.
>USB Universal Host Controller Interface driver v3.0
>Loading uhci-hcdACPI: PCI Interrupt 0000:00:12.0[A] -> .ko module
>LoadGSI 16 (level, low) -> IRQ 193
>ing ohci-hcd.ko ohci_hcd 0000:00:12.0: OHCI Host Controller
>module
>ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:12.0: irq 193, io mem 0xfe8fe000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:12.1[A] -> GSI 16 (level, low) -> IRQ 193
>ohci_hcd 0000:00:12.1: OHCI Host Controller
>ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:12.1: irq 193, io mem 0xfe8fd000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 169
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.0: irq 169, io mem 0xfe8fc000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 18 (level, low) -> IRQ 169
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.1: irq 169, io mem 0xfe8f7000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:14.5[C] -> GSI 18 (level, low) -> IRQ 169
>ohci_hcd 0000:00:14.5: OHCI Host Controller
>ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:14.5: irq 169, io mem 0xfe8f5000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>Loading ehci-hcdACPI: PCI Interrupt 0000:00:12.2[B] -> .ko module
>GSI 17 (level, low) -> IRQ 201
>ehci_hcd 0000:00:12.2: EHCI Host Controller
>ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:12.2: debug port 1
>ehci_hcd 0000:00:12.2: irq 201, io mem 0xfe8ff000
>ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 6 ports detected
>usb 4-2: new low speed USB device using ohci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:13.2[B] -> GSI 19 (level, low) -> IRQ 209
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:13.2: debug port 1
>ehci_hcd 0000:00:13.2: irq 209, io mem 0xfe8f6800
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb 4-2: string descriptor 0 read error: -110
>usb 4-2: string descriptor 0 read error: -110
>usb 4-2: configuration #1 chosen from 1 choice
>usb 4-2: can't set config #1, error -110
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>usb 4-2: USB disconnect, address 2
>Loading jbd.ko module
>Loading ext3.ko module
>Loading scsi_mod.ko module
>SCSI subsystem initialized
>Loading sd_mod.ko module
>Loading libata.ko module
>Loading ahci.ko module
>ahci_init_one: ENTER
>ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 22 (level, low) -> IRQ 217
>ata_host_alloc: ENTER
>ata_port_alloc: ENTER
>ata_port_alloc: ENTER
>ata_port_alloc: ENTER
>ata_port_alloc: ENTER
>usb 4-2: new low speed USB device using ohci_hcd and address 3
>usb 4-2: configuration #1 chosen from 1 choice
>input: Microsoft Basic Optical Mouse as /class/input/input0
>input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:13.1-2
>usb 4-3: new low speed USB device using ohci_hcd and address 4
>ahci_port_init: PORT_SCR_ERR 0x80000
>ahci_port_init: PORT_IRQ_STAT 0x0
>ahci_port_init: PORT_SCR_ERR 0x80000
>ahci_port_init: PORT_IRQ_STAT 0x0
>ahci_port_init: PORT_SCR_ERR 0x40d0000
>ahci_port_init: PORT_IRQ_STAT 0x0
>ahci_port_init: PORT_SCR_ERR 0x40d0000
>ahci_port_init: PORT_IRQ_STAT 0x0
>ahci_init_controller: HOST_CTL 0x80000000
>ahci_init_controller: HOST_CTL 0x80000002
>ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
>__ata_port_freeze: ata4294967295 port frozen
>__ata_port_freeze: ata4294967295 port frozen
>__ata_port_freeze: ata4294967295 port frozen
>__ata_port_freeze: ata4294967295 port frozen
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ff900 irq 217
>ata2: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ff980 irq 217
>ata3: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ffa00 irq 217
>ata4: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ffa80 irq 217
>ata_host_register: probe begin
>ata_port_schedule_eh: port EH scheduled
>ata_scsi_error: ENTER
>ata_port_flush_task: ENTER
>ata_eh_link_autopsy: ENTER
>ata_eh_recover: ENTER
>__ata_port_freeze: ata1 port frozen
>ahci_hardreset: ENTER
>sata_link_hardreset: ENTER
>usb 4-3: configuration #1 chosen from 1 choice
>input: Logitech Logitech USB Keyboard as /class/input/input1
>input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:13.1-3
>sata_link_hardreset: EXIT, rc=0
>ahci_hardreset: EXIT, rc=0, class=0
>ata_eh_thaw_port: ata1 port thawed
>ata_std_postreset: ENTER
>ata1: SATA link down (SStatus 0 SControl 300)
>ata_std_postreset: EXIT
>ata_eh_revalidate_and_attach: ENTER
>ata_eh_recover: EXIT, rc=0
>ata_scsi_error: EXIT
>ata_port_schedule_eh: port EH scheduled
>ata_scsi_error: ENTER
>ata_port_flush_task: ENTER
>ata_eh_link_autopsy: ENTER
>ata_eh_recover: ENTER
>__ata_port_freeze: ata2 port frozen
>ahci_hardreset: ENTER
>sata_link_hardreset: ENTER
>sata_link_hardreset: EXIT, rc=0
>ahci_hardreset: EXIT, rc=0, class=0
>ata_eh_thaw_port: ata2 port thawed
>ata_std_postreset: ENTER
>ata2: SATA link down (SStatus 0 SControl 300)
>ata_std_postreset: EXIT
>ata_eh_revalidate_and_attach: ENTER
>ata_eh_recover: EXIT, rc=0
>ata_scsi_error: EXIT
>ata_port_schedule_eh: port EH scheduled
>ata_scsi_error: ENTER
>ata_port_flush_task: ENTER
>ata_eh_link_autopsy: ENTER
>ata_eh_recover: ENTER
>__ata_port_freeze: ata3 port frozen
>ahci_hardreset: ENTER
>sata_link_hardreset: ENTER
>sata_link_hardreset: EXIT, rc=-11
>ata_dev_classify: found ATAPI device by sig
>ahci_hardreset: EXIT, rc=-11, class=3
>ahci_sb600_softreset: ENTER
>ahci_do_softreset: ENTER
>ata3: softreset failed (device not ready)
>ata3: failed due to HW bug, retry pmp=0
>ahci_do_softreset: ENTER
>ata_dev_classify: found ATAPI device by sig
>ahci_do_softreset: EXIT, class=3
>ata_eh_thaw_port: ata3 port thawed
>ata_std_postreset: ENTER
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata_std_postreset: EXIT
>ata_eh_revalidate_and_attach: ENTER
>ata_sg_setup: ENTER, ata3
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 2
>ahci_interrupt: EXIT
>ata_port_flush_task: ENTER
>ata_dump_id: 49==0x0f00  53==0x0006  63==0x0007  64==0x0003  75==0x0000  
>ata_dump_id: 80==0x00fc  81==0x0021  82==0x0218  83==0x4000  84==0x4000  
>ata_dump_id: 88==0x101f  93==0x0000
>ata3.00: ATAPI: PIONEER DVD-RW  DVR-215, 1.13, max UDMA/66
>ata_dev_set_xfermode: set features - xfer mode
>ahci_interrupt: ENTER
>ahci_interrupt: port 2
>ahci_interrupt: EXIT
>ata_port_flush_task: ENTER
>ata_dev_set_xfermode: EXIT, err_mask=0
>ata_sg_setup: ENTER, ata3
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 2
>ahci_interrupt: EXIT
>ata_port_flush_task: ENTER
>ata_dump_id: 49==0x0f00  53==0x0006  63==0x0007  64==0x0003  75==0x0000  
>ata_dump_id: 80==0x00fc  81==0x0021  82==0x0218  83==0x4000  84==0x4000  
>ata_dump_id: 88==0x101f  93==0x0000
>ata_dev_set_mode: xfer_shift=12, xfer_mode=0x44
>ata3.00: configured for UDMA/66
>ata_eh_recover: EXIT, rc=0
>ata_scsi_error: EXIT
>ata_port_schedule_eh: port EH scheduled
>ata_scsi_error: ENTER
>ata_port_flush_task: ENTER
>ata_eh_link_autopsy: ENTER
>ata_eh_recover: ENTER
>__ata_port_freeze: ata4 port frozen
>ahci_hardreset: ENTER
>sata_link_hardreset: ENTER
>sata_link_hardreset: EXIT, rc=-11
>ata_dev_classify: found ATA device by sig
>ahci_hardreset: EXIT, rc=-11, class=1
>ahci_sb600_softreset: ENTER
>ahci_do_softreset: ENTER
>ata4: softreset failed (device not ready)
>ata4: failed due to HW bug, retry pmp=0
>ahci_do_softreset: ENTER
>ata_dev_classify: found ATA device by sig
>ahci_do_softreset: EXIT, class=1
>ata_eh_thaw_port: ata4 port thawed
>ata_std_postreset: ENTER
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata_std_postreset: EXIT
>ata_eh_revalidate_and_attach: ENTER
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_port_flush_task: ENTER
>ahci_interrupt: ENTER
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_port_flush_task: ENTER
>ata4.00: HPA detected: current 156299375, native 156301488
>ata_dump_id: 49==0x2f00  53==0x0007  63==0x0007  64==0x0003  75==0x001f  
>ata_dump_id: 80==0x00fe  81==0x0000  82==0x346b  83==0x7d01  84==0x4023  
>ata_dump_id: 88==0x407f  93==0x0000
>ata4.00: ATA-7: ST3802110AS, 3.AAE, max UDMA/133
>ata4.00: 156299375 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata_dev_set_xfermode: set features - xfer mode
>ahci_interrupt: ENTER
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_port_flush_task: ENTER
>ata_dev_set_xfermode: EXIT, err_mask=0
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_port_flush_task: ENTER
>ahci_interrupt: ENTER
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_port_flush_task: ENTER
>ata_dump_id: 49==0x2f00  53==0x0007  63==0x0007  64==0x0003  75==0x001f  
>ata_dump_id: 80==0x00fe  81==0x0000  82==0x346b  83==0x7d01  84==0x4023  
>ata_dump_id: 88==0x407f  93==0x0000
>ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
>ata4.00: configured for UDMA/133
>ata_eh_recover: EXIT, rc=0
>ata_scsi_error: EXIT
>ata_host_register: host probe begin
>ata_scsi_dump_cdb: CDB (3:0,0,0) 12 00 00 00 24 00 ff ff e8
>ata_scsi_translate: ENTER
>ata_sg_setup: ENTER, ata3
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>atapi_qc_complete: ENTER, err_mask 0x0
>ahci_interrupt: port 2
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (3:0,0,0) 12 00 00 00 60 00 ff ff e8
>ata_scsi_translate: ENTER
>ata_sg_setup: ENTER, ata3
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>atapi_qc_complete: ENTER, err_mask 0x0
>ahci_interrupt: port 2
>ahci_interrupt: EXIT
>  Vendor: PIONEER   Model: DVD-RW  DVR-215   Rev: 1.13
>  Type:   CD-ROM                             ANSI SCSI revision: 05
>ata_scsi_dump_cdb: CDB (4:0,0,0) 12 00 00 00 24 00 3a 04 00
>ata_scsiop_inq_std: ENTER
>ata_scsi_dump_cdb: CDB (4:0,0,0) 12 00 00 00 60 00 3a 04 00
>ata_scsiop_inq_std: ENTER
>  Vendor: ATA       Model: ST3802110AS       Rev: 3.AA
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>ata_scsi_dump_cdb: CDB (4:0,0,0) 00 00 00 00 00 00 00 68 89
>ata_scsiop_noop: ENTER
>ata_scsi_dump_cdb: CDB (4:0,0,0) 25 00 00 00 00 00 00 00 00
>ata_scsiop_read_cap: ENTER
>SCSI device sda: 156299375 512-byte hdwr sectors (80025 MB)
>ata_scsi_dump_cdb: CDB (4:0,0,0) 5a 00 3f 00 00 00 00 00 08
>ata_scsiop_mode_sense: ENTER
>sda: Write Protect is off
>ata_scsi_dump_cdb: CDB (4:0,0,0) 5a 00 08 00 00 00 00 00 08
>ata_scsiop_mode_sense: ENTER
>ata_scsi_dump_cdb: CDB (4:0,0,0) 5a 00 08 00 00 00 00 00 24
>ata_scsiop_mode_sense: ENTER
>SCSI device sda: drive cache: write back
>ata_scsi_dump_cdb: CDB (4:0,0,0) 00 00 00 00 00 00 00 00 24
>ata_scsiop_noop: ENTER
>ata_scsi_dump_cdb: CDB (4:0,0,0) 25 00 00 00 00 00 00 00 00
>ata_scsiop_read_cap: ENTER
>SCSI device sda: 156299375 512-byte hdwr sectors (80025 MB)
>ata_scsi_dump_cdb: CDB (4:0,0,0) 5a 00 3f 00 00 00 00 00 08
>ata_scsiop_mode_sense: ENTER
>sda: Write Protect is off
>ata_scsi_dump_cdb: CDB (4:0,0,0) 5a 00 08 00 00 00 00 00 08
>ata_scsiop_mode_sense: ENTER
>ata_scsi_dump_cdb: CDB (4:0,0,0) 5a 00 08 00 00 00 00 00 24
>ata_scsiop_mode_sense: ENTER
>SCSI device sda: drive cache: write back
> sda:<3>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 00 00 00 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
> sda1 sda2 <<3>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 01 77 0d 78 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 01 77 0d 79 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ahci_interrupt: ENTER
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
> sda5<3>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 02 31 1b b0 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
> sda6<3>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 21 56 80 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
> sda7<3>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 3b 13 a8 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 3b 13 a9 00 00 07
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
> sda8<3>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 04 26 67 68 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 04 26 67 69 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ahci_interrupt: ENTER
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
> sda9<3>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 05 16 a2 40 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
> sda10 > sda3 sda4
>sd 3:0:0:0: Attached scsi disk sda
>Waiting for driver initialization.
>Scanning and conata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 06 06 20 01 00 00 08
>ata_scsi_translate: ENTER
>figuring dmraid scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>supported deviceata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>s
>Trying to resata_scsi_translate: EXIT
>ume from /dev/sda7
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 05 16 a2 81 00 00 02
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 05 16 a2 83 00 00 86
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 3 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 3 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 05 16 a1 ad 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 05 16 a1 ae 00 00 07
>ata_scsi_translate: ENTER
>ahci_interrupt: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 04 26 67 ad 00 00 80
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 04 26 68 2d 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ahci_interrupt: ENTER
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 2 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 04 26 66 ed 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 04 26 66 ee 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 3b 13 ed 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 3b 13 ee 00 00 80
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ahci_interrupt: ENTER
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 3b 14 6e 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 3b 12 c4 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 21 56 c4 00 00 02
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 21 56 c6 00 00 86
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 21 55 f0 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 21 55 f1 00 00 07
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 02 31 1b f0 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 02 31 1b f1 00 00 80
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 02 31 1c 71 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 02 31 1a b9 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 01 77 0d b9 00 00 88
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 50 e4 0c 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 50 e4 0d 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ahci_interrupt: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 07 9c 50 0c 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 07 9c 50 0d 00 00 80
>ata_scsi_translate: ENTER
>ahci_interrupt: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 07 9c 50 8d 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 07 9c 4f 53 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 07 9c 4f 54 00 00 07
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 06 06 20 d3 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 06 06 20 d4 00 00 80
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 06 06 21 54 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 01 77 0d 7a 00 00 02
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 01 77 0c bf 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 01 77 0c c0 00 00 07
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 00 00 3f 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 00 00 40 00 00 80
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ahci_interrupt: ENTER
>ata_sg_setup: 5 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 5 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 00 00 c0 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 00 5e 0f 00 00 10
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 00 5d df 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 00 5d e0 00 00 0f
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 20 00 5f 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 20 00 60 00 00 17
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 30 62 7f 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 30 62 80 00 00 0f
>ata_scsi_translate: ENTER
>ahci_interrupt: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 00 86 5f 00 00 18
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 16 55 7f 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 16 55 80 00 00 0f
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 1e f3 1f 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 1e f3 20 00 00 17
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 50 ef 80 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 50 ef 81 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 00 00 00 00 00 80
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 9 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 00 00 80 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 9 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 21 56 c4 00 00 02
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 21 56 c6 00 00 1e
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ahci_interrupt: ENTER
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>No suspend signaata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 06 06 20 01 00 00 02
>ata_scsi_translate: ENTER
>ture on swap, noscsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>t resuming.
>Creata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ating root devicata_scsi_translate: EXIT
>e.
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 06 06 20 03 00 00 06
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ahci_interrupt: ENTER
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 05 16 a2 81 00 00 02
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 05 16 a2 83 00 00 86
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ahci_interrupt: ENTER
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 05 16 a1 ad 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 05 16 a1 ae 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 04 26 67 ad 00 00 80
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 14 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 04 26 68 2d 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ahci_interrupt: ENTER
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 14 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 04 26 66 ed 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 04 26 66 ee 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 3b 13 ed 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 3b 13 ee 00 00 80
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 7 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 7 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 3b 14 6e 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 3b 12 c4 00 00 02
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 3b 12 c6 00 00 06
>ata_scsi_translate: ENTER
>ahci_interrupt: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 21 56 c4 00 00 02
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 21 56 c6 00 00 86
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ahci_interrupt: ENTER
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 21 55 f0 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 21 55 f1 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 02 31 1b f0 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 02 31 1b f1 00 00 80
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 8 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 8 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 02 31 1c 71 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 02 31 1a b9 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 01 77 0d b9 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 01 77 0d c1 00 00 80
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ahci_interrupt: ENTER
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 5 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 5 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 50 e4 0c 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 50 e4 0d 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 07 9c 50 0c 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 07 9c 50 0d 00 00 80
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ahci_interrupt: ENTER
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 10 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 10 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 07 9c 50 8d 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>Mounting root fiata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 06 06 20 01 00 00 02
>ata_scsi_translate: ENTER
>lesystem.
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 06 06 20 03 00 00 06
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ahci_interrupt: ENTER
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 05 16 a2 81 00 00 02
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 05 16 a2 83 00 00 86
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ahci_interrupt: ENTER
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 10 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 10 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 05 16 a1 ad 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 05 16 a1 ae 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 04 26 67 ad 00 00 80
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 5 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 04 26 68 2d 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ahci_interrupt: ENTER
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 5 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 04 26 66 ed 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 04 26 66 ee 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 3b 13 ed 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 3b 13 ee 00 00 80
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 3 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 3 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 3b 14 6e 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 3b 12 c4 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 21 56 c4 00 00 02
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 21 56 c6 00 00 86
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 5 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 5 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 21 55 f0 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 03 21 55 f1 00 00 07
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 02 31 1b f0 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 02 31 1b f1 00 00 80
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 12 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 12 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 02 31 1c 71 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 02 31 1a b9 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 01 77 0d b9 00 00 88
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 5 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 5 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 50 e4 0c 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 50 e4 0d 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 07 9c 50 0c 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 07 9c 50 0d 00 00 80
>ata_scsi_translate: ENTER
>ahci_interrupt: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 5 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 5 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 07 9c 50 8d 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 07 9c 4f 53 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 07 9c 4f 54 00 00 07
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 06 06 20 d3 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 06 06 20 d4 00 00 80
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 13 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 13 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 06 06 21 54 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 01 77 0d 7a 00 00 02
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 01 77 0c bf 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 01 77 0c c0 00 00 07
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 00 00 3f 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 00 00 40 00 00 80
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 7 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 7 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 00 00 c0 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 00 5e 0f 00 00 10
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 00 5d df 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 00 5d e0 00 00 0f
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 20 00 5f 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 20 00 60 00 00 17
>ata_scsi_translate: ENTER
>ahci_interrupt: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 30 62 7f 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 30 62 80 00 00 0f
>ata_scsi_translate: ENTER
>ahci_interrupt: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 00 86 5f 00 00 18
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 16 55 7f 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 16 55 80 00 00 0f
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 1e f3 1f 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 1e f3 20 00 00 17
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 50 ef 80 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 50 ef 81 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 00 00 00 00 00 80
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 10 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 00 00 00 80 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 10 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 50 e4 0c 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 50 e4 0d 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 07 9c 50 0c 00 00 01
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 07 9c 50 0d 00 00 80
>ata_scsi_translate: ENTER
>ahci_interrupt: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 12 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 12 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 07 9c 50 8d 00 00 07
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 07 9c 50 0e 00 00 02
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 07 9c 50 0c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 07 9c 50 14 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 07 9c 6b 74 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 07 9c 8b 6c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Setting up otherata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 07 9c 8b 3c 00 00 08
>ata_scsi_translate: ENTER
> filesystems.
>Sscsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>etting up new roata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ot fs
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 64 50 1c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 34 50 1c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 d0 0c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 d0 6c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>no fstab.sys, moata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 00 50 1c 00 00 08
>ata_scsi_translate: ENTER
>unting internal scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>defaults
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 07 cc 50 1c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>Switching to newata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 90 50 1c 00 00 08
>ata_scsi_translate: ENTER
> root and runninscsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>g init.
>unmountata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ing old /dev
>unata_scsi_translate: EXIT
>mounting old /proc
>unmounting old /sys
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 93 d0 0c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 94 71 3c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 90 50 34 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 93 f8 f4 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 3 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 3 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f4 50 1c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f7 d0 0c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f4 54 74 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 45 24 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 45 74 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 45 7c 00 00 10
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 45 8c 00 00 98
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 13 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 13 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 45 44 00 00 30
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 6 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 6 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 93 f9 14 00 00 30
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 6 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 6 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 e9 c4 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 34 50 fc 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 d0 4c 00 00 10
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 d0 ec 00 00 08
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 2 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 dc 64 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 e9 b4 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 f8 0c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 38 10 14 00 00 18
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 3 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 39 6c fc 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 39 6d 14 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 3 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f4 54 7c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 6c 34 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 4 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 4 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 6c 94 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 6d 8c 00 00 90
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 14 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 14 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 6e 1c 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 3 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 3 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 6e 4c 00 00 38
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 5 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 5 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 6e 84 00 00 58
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 6 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 6 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 46 24 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 46 84 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 4f 84 00 00 88
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 9 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 5b 0c 00 00 78
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 8 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 9 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 8 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 46 44 00 00 40
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 46 8c 00 00 a8
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 6 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 2 sg elements
>ata_sg_clean: unmapping 6 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 5a f4 00 00 18
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 5d 4c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 4c 14 00 01 00
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 8 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 8 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 49 14 00 01 00
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 8 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 8 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 34 50 7c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 48 6c 00 00 a8
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 4 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 4 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 4d dc 00 01 00
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 5 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 5 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 e8 24 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 4e dc 00 00 a8
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 4 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 4 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 35 90 0c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 47 34 00 00 88
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 3 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 3 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 47 cc 00 00 a0
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 4a 2c 00 01 00
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 3 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 3 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 74 50 1c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 4d 14 00 00 a0
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 3 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 3 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>SELinux:  Disabled at runtime.
>type=1404 audit(1218798510.559:2): selinux=0 auid=4294967295 ses=4294967295
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 40 50 1c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 43 d0 0c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 40 50 24 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 43 d4 04 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>
INIT: version 2.86 booting

>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 34 50 8c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 34 90 5c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 4a 14 00 00 18
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 34 50 24 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ahci_interrupt: ENTER
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 40 90 2c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 40 90 44 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ahci_interrupt: ENTER
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 d4 7c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 43 d3 a4 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 34 50 94 00 00 08
>ata_scsi_translate: ENTER
>ahci_interrupt: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 40 50 34 00 00 08
>ahci_interrupt: ENTER
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 ea 9c 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ec 50 1c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ef d0 0c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ec 50 24 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 8d c4 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 8e 24 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 93 94 00 00 90
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 8d e4 00 00 40
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 8e 2c 00 00 a0
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f4 50 2c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 82 0c 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 92 4c 00 01 00
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 3 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 3 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 8e cc 00 00 80
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 8f c4 00 00 48
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 90 cc 00 00 40
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 91 1c 00 00 78
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 93 4c 00 00 48
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 91 94 00 00 b0
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 8f 4c 00 00 78
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 40 50 7c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 43 ee 1c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 d4 5c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f4 50 24 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f7 f2 44 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f7 f2 64 00 00 40
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 34 52 0c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 36 50 34 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 ea bc 00 00 18
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 9a b4 00 00 18
>ata_scsi_translate: ENTER
>ahci_interrupt: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 4b 3c 00 00 d8
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ec 50 2c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 9a cc 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 9a ec 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 d0 14 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 d0 5c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 95 44 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 95 64 00 00 48
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 95 ac 00 00 18
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f4 50 4c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 8f 6c 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 8f 8c 00 00 30
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 68 7c 00 00 18
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f4 52 54 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 8c 14 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 8c 34 00 00 48
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 8c 7c 00 00 50
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 e8 3c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 36 2a 3c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 d4 8c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 ea 24 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 90 50 54 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 94 e7 54 00 00 10
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 d0 fc 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 ea 1c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 39 6d 04 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 94 50 1c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 97 d0 0c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 97 d0 a4 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 9b 4b ac 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 97 d0 c4 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 98 be 74 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 94 55 dc 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 9b fc 3c 00 00 10
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 9e 3e cc 00 00 58
>ata_scsi_translate: ENTER
>ahci_interrupt: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 9e 3f 24 00 00 b0
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 9b fc 4c 00 00 80
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 9b fd 0c 00 01 00
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 3 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 3 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 9c 04 54 00 01 00
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 9b fe 0c 00 00 90
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 9c 03 94 00 00 c0
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 9b 4b a4 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 9b eb 34 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 9d dd a4 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 94 56 24 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 97 77 9c 00 00 38
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 34 50 9c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 ea ec 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 97 d0 1c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 94 50 24 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 97 d2 04 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 97 e6 34 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 94 55 7c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 9a 29 cc 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 97 e6 3c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 94 50 6c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 97 da ac 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 97 da b4 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 97 da 4c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 97 da 54 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 97 d0 14 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 9e 40 f4 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 80 64 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 80 c4 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 82 54 00 00 90
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 3 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 3 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 65 cc 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 66 2c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 66 7c 00 00 f0
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 80 84 00 00 40
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 80 cc 00 00 a0
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 81 6c 00 00 b8
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 82 24 00 00 30
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 47 bc 00 00 10
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 94 71 34 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 90 50 24 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 94 e8 c4 00 00 10
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 9e 40 ec 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 96 6c 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 96 8c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 90 50 44 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 90 50 3c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 94 8b fc 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ef f0 b4 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 9f fc 00 00 10
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 9f 9c 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 9f bc 00 00 28
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f4 50 5c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f8 38 84 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f8 38 8c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f8 3d c4 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f8 3d cc 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f4 50 8c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed a4 2c 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed a4 4c 00 00 48
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed a4 94 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f8 3e 74 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>		Welcome to ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 34 50 3c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 dd c4 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 4b 2c 00 00 10
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>Red Hatata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 83 3c 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 83 5c 00 00 48
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
> Enterprise Linuata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 83 a4 00 00 08
>ata_scsi_translate: ENTER
>x Client
>		Presscsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>s 'I' to enter iata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>nteractive startata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 97 d0 84 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>up.
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 9e 3f d4 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 94 52 8c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 b3 73 04 00 00 18
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 5e b4 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 5f 14 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 63 1c 00 00 90
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 5e d4 00 00 40
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 5f 1c 00 00 a0
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 94 56 5c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 9e 41 54 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 94 5d 0c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 97 0d b4 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 97 0d d4 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 5e 5c 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 5e 7c 00 00 38
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 5d 5c 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 5d 7c 00 00 48
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 5d c4 00 00 98
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 60 f4 00 01 00
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 5f cc 00 01 00
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 34 51 2c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 fa e4 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 37 fa ec 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 35 90 1c 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 93 f8 9c 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 93 f8 bc 00 00 28
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 8a dc 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 8a fc 00 00 48
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 f6 8b 44 00 00 38
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 09 35 90 14 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ec 50 34 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 94 94 00 00 20
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 94 b4 00 00 48
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 2 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 2 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 94 fc 00 00 08
>ata_scsi_translate: ENTER
>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>Setting clock  (ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed 84 8c 00 00 20
>ata_scsi_translate: ENTER
>localtime): Fri scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>Aug 15 11:08:37 ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>CST 2008 ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>[  OK  ]ata_scsi_dump_cdb: CDB (4:0,0,0) 28 00 08 ed a5 1c 00 00 10
>ata_scsi_translate: ENTER
>

>scsi_10_lba_len: ten-byte command
>ata_sg_setup: ENTER, ata4
>ata_sg_setup: 1 sg elements mapped
>ahci_fill_sg: ENTER
>ata_scsi_translate: EXIT
>ahci_interrupt: ENTER
>ata_sg_clean: unmapping 1 sg elements
>ahci_interrupt: port 3
>ahci_interrupt: EXIT
>Starting udev: BUG: unable to handle kernel NULL pointer dereference<3>ahci_interrupt: ENTER
> printing eip:
>*pde = 00000000
>Oops: 0002 [#1]
>SMP 
>last sysfs file: /class/sound/seq/dev
>Modules linked in: snd_seq_midi_event(U) snd_seq(U) snd_seq_device(U) snd_pcm_oss(U) sr_mod(U) snd_mixer_oss(U) snd_pcm(U) cdrom(U) snd_timer(U) snd_page_alloc(U) snd_hwdep(U) snd(U) sg(U) k8_edac(U) i2c_piix4(U) soundcore(U) edac_mc(U) k8temp(U) i2c_core(U) hwmon(U) serio_raw(U) pcspkr(U) tg3(U) ahci(U) libata(U) sd_mod(U) scsi_mod(U) ext3(U) jbd(U) ehci_hcd(U) ohci_hcd(U) uhci_hcd(U)
>CPU:    0
>EIP:    0060:[<f08f4651>]    Tainted: G      VLI
>EFLAGS: 00010046   (2.6.18-102dbg.2 #1) 
>EIP is at ata_qc_issue+0x215/0x5d8 [libata]
>eax: ef5758ac   ebx: ef574000   ecx: ef4d5940   edx: 00000000
>esi: 00000000   edi: 00000000   ebp: ef57407c   esp: ee2bab4c
>ds: 007b   es: 007b   ss: 0068
>Process scsi_id (pid: 1389, ti=ee2ba000 task=ee2daaa0 task.ti=ee2ba000)
>Stack: ef574000 ef575788 ef4d5940 ef5740f8 ef4d5940 ef574000 00000001 00000000 
>       efbee1c0 ef57407c 00000000 ef5758ac f087b4f7 f08f8d37 ef574000 ef49b412 
>       efbee1c0 ef5758ac f087b4f7 f08fb5d3 f08f91c4 ef574000 efbef400 efbee1c0 
>Call Trace:
> [<f087b4f7>] scsi_done+0x0/0x16 [scsi_mod]
> [<f08f8d37>] ata_scsi_translate+0xe5/0x17f [libata]
> [<f087b4f7>] scsi_done+0x0/0x16 [scsi_mod]
> [<f08fb5d3>] ata_scsi_queuecmd+0x20f/0x231 [libata]
> [<f08f91c4>] atapi_xlat+0x0/0x12f [libata]
> [<f087ba80>] scsi_dispatch_cmd+0x208/0x281 [scsi_mod]
> [<f0880274>] scsi_request_fn+0x247/0x2f9 [scsi_mod]
> [<c04d6e67>] elv_insert+0xc8/0x1ad
> [<c04d942d>] blk_execute_rq_nowait+0x6d/0x84
> [<c04d94c2>] blk_execute_rq+0x7e/0x9f
> [<c04d8b6b>] blk_end_sync_rq+0x0/0x1d
> [<c04dc818>] sg_io+0x253/0x338
> [<c04700fe>] get_unused_fd+0x7/0xb5
> [<c04dcd47>] scsi_cmd_ioctl+0x1b9/0x366
> [<f0954fe4>] cdrom_open+0x833/0x876 [cdrom]
> [<c0486d38>] alloc_inode+0xde/0x166
> [<c045b68a>] __do_page_cache_readahead+0x8b/0x1c6
> [<c060b063>] do_page_fault+0x20a/0x4b8
> [<f0953ca3>] cdrom_ioctl+0x22/0xb30 [cdrom]
> [<f0974c8d>] sr_block_ioctl+0x41/0x74 [sr_mod]
> [<c04db08f>] blkdev_driver_ioctl+0x4b/0x5b
> [<c04db6ba>] blkdev_ioctl+0x61b/0x669
> [<c0478737>] init_once+0x0/0x64
> [<c04e37c6>] kobject_get+0xf/0x13
> [<c04dbb7b>] get_disk+0x35/0x6e
> [<c04e37c6>] kobject_get+0xf/0x13
> [<f097433f>] sr_block_open+0x74/0x81 [sr_mod]
> [<c0478467>] do_open+0x211/0x2cc
> [<c047868e>] blkdev_open+0x0/0x44
> [<c04786aa>] blkdev_open+0x1c/0x44
> [<c0470296>] __dentry_open+0xea/0x1ab
> [<c04703bb>] nameidata_to_filp+0x19/0x28
> [<c04703f5>] do_filp_open+0x2b/0x31
> [<c0467978>] free_pages_and_swap_cache+0x6b/0x7f
> [<c0477ce0>] block_ioctl+0x13/0x16
> [<c0477ccd>] block_ioctl+0x0/0x16
> [<c0480d54>] do_ioctl+0x1c/0x5d
> [<c0480fdf>] vfs_ioctl+0x24a/0x25c
> [<c0481039>] sys_ioctl+0x48/0x5f
> [<c0404f17>] syscall_call+0x7/0xb
> =======================
>Code: 24 03 74 27 e8 02 18 b3 cf 50 68 d8 42 90 f0 68 c5 11 00 00 68 be 53 90 f0 68 d8 53 90 f0 e8 21 24 b3 cf e8 f7 1f b1 cf 83 c4 14 <c7> 07 00 00 00 00 8b 4c 24 10 8b 1d 10 fb 7a c0 8b 51 04 8b 01 
>EIP: [<f08f4651>] ata_qc_issue+0x215/0x5d8 [libata] SS:ESP 0068:ee2bab4c
> <0>Kernel panic - not syncing: Fatal exception
> BUG: warning at arch/i386/kernel/smp.c:550/smp_call_function() (Tainted: G     )
> [<c0417ae4>] stop_this_cpu+0x0/0x33
> [<c04178d3>] smp_call_function+0x57/0xc3
> [<c0426a82>] printk+0x18/0x8e
> [<c0417952>] smp_send_stop+0x13/0x1c
> [<c0426043>] panic+0x4c/0x171
> [<c04064fa>] die+0x262/0x296
> [<c060b243>] do_page_fault+0x3ea/0x4b8
> [<c060ae59>] do_page_fault+0x0/0x4b8
> [<c0405a89>] error_code+0x39/0x40
> [<f08f4651>] ata_qc_issue+0x215/0x5d8 [libata]
> [<f087b4f7>] scsi_done+0x0/0x16 [scsi_mod]
> [<f08f8d37>] ata_scsi_translate+0xe5/0x17f [libata]
> [<f087b4f7>] scsi_done+0x0/0x16 [scsi_mod]
> [<f08fb5d3>] ata_scsi_queuecmd+0x20f/0x231 [libata]
> [<f08f91c4>] atapi_xlat+0x0/0x12f [libata]
> [<f087ba80>] scsi_dispatch_cmd+0x208/0x281 [scsi_mod]
> [<f0880274>] scsi_request_fn+0x247/0x2f9 [scsi_mod]
> [<c04d6e67>] elv_insert+0xc8/0x1ad
> [<c04d942d>] blk_execute_rq_nowait+0x6d/0x84
> [<c04d94c2>] blk_execute_rq+0x7e/0x9f
> [<c04d8b6b>] blk_end_sync_rq+0x0/0x1d
> [<c04dc818>] sg_io+0x253/0x338
> [<c04700fe>] get_unused_fd+0x7/0xb5
> [<c04dcd47>] scsi_cmd_ioctl+0x1b9/0x366
> [<f0954fe4>] cdrom_open+0x833/0x876 [cdrom]
> [<c0486d38>] alloc_inode+0xde/0x166
> [<c045b68a>] __do_page_cache_readahead+0x8b/0x1c6
> [<c060b063>] do_page_fault+0x20a/0x4b8
> [<f0953ca3>] cdrom_ioctl+0x22/0xb30 [cdrom]
> [<f0974c8d>] sr_block_ioctl+0x41/0x74 [sr_mod]
> [<c04db08f>] blkdev_driver_ioctl+0x4b/0x5b
> [<c04db6ba>] blkdev_ioctl+0x61b/0x669
> [<c0478737>] init_once+0x0/0x64
> [<c04e37c6>] kobject_get+0xf/0x13
> [<c04dbb7b>] get_disk+0x35/0x6e
> [<c04e37c6>] kobject_get+0xf/0x13
> [<f097433f>] sr_block_open+0x74/0x81 [sr_mod]
> [<c0478467>] do_open+0x211/0x2cc
> [<c047868e>] blkdev_open+0x0/0x44
> [<c04786aa>] blkdev_open+0x1c/0x44
> [<c0470296>] __dentry_open+0xea/0x1ab
> [<c04703bb>] nameidata_to_filp+0x19/0x28
> [<c04703f5>] do_filp_open+0x2b/0x31
> [<c0467978>] free_pages_and_swap_cache+0x6b/0x7f
> [<c0477ce0>] block_ioctl+0x13/0x16
> [<c0477ccd>] block_ioctl+0x0/0x16
> [<c0480d54>] do_ioctl+0x1c/0x5d
> [<c0480fdf>] vfs_ioctl+0x24a/0x25c
> [<c0481039>] sys_ioctl+0x48/0x5f
> [<c0404f17>] syscall_call+0x7/0xb
> =======================

Actions: View

Attachments on bug 451586: 309434 | 314171 | 314172 | 314174 | 314285 | 314369 | 314371