Attachment 314477 Details for Bug 459405 – dmesg output from Dell Precicion 380

dmesg output from Dell Precicion 380

dell-precision-380-dmesg.txt (text/plain), 26.38 KB, created by Daniel Qarras on 2008-08-18 15:44:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Daniel Qarras

Created: 2008-08-18 15:44:42 UTC

Size: 26.38 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.25.9-76.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Fri Jun 27 16:14:35 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fe8ac00 (usable)
> BIOS-e820: 000000007fe8ac00 - 000000007fe8cc00 (ACPI NVS)
> BIOS-e820: 000000007fe8cc00 - 000000007fe8ec00 (ACPI data)
> BIOS-e820: 000000007fe8ec00 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>1150MB HIGHMEM available.
>896MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>found SMP MP-table at [c00fe710] 000fe710
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 523914) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   523914
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   523914
>On node 0 totalpages: 523914
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2301 pages used for memmap
>  HighMem zone: 292237 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FEB00, 0024 (r2 DELL  )
>ACPI: XSDT 000FD25E, 0074 (r1 DELL    WS 380         7 ASL        61)
>ACPI: FACP 000FD356, 00F4 (r3 DELL    WS 380         7 ASL        61)
>ACPI: DSDT FFFCBC59, 3112 (r1   DELL    dt_ex     1000 INTL 20050309)
>ACPI: FACS 7FE8AC00, 0040
>ACPI: SSDT FFFCED6B, 0099 (r1   DELL    st_ex     1000 INTL 20050309)
>ACPI: APIC 000FD44A, 0072 (r1 DELL    WS 380         7 ASL        61)
>ACPI: BOOT 000FD4BC, 0028 (r1 DELL    WS 380         7 ASL        61)
>ACPI: ASF! 000FD4E4, 0067 (r16 DELL    WS 380         7 ASL        61)
>ACPI: MCFG 000FD54B, 003E (r1 DELL    WS 380         7 ASL        61)
>ACPI: HPET 000FD589, 0038 (r1 DELL    WS 380         7 ASL        61)
>ACPI: SSDT 7FE8AC40, 0175 (r1 DpgPmm  Cpu0Ist       11 INTL 20050309)
>ACPI: SSDT 7FE8B049, 0175 (r1 DpgPmm  Cpu1Ist       11 INTL 20050309)
>ACPI: SSDT 7FE8B452, 0140 (r1 DpgPmm    CpuPm       10 INTL 20050309)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519821
>Kernel command line: ro root=UUID=9d6a180e-ea9c-44b1-818e-dbf653db06e4 rhgb quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07b8000 soft=c0798000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 3391.732 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2069932k/2095656k available (2234k kernel code, 24460k reserved, 1119k data, 284k init, 1178152k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc074e000 - 0xc0795000   ( 284 kB)
>      .data : 0xc062e92d - 0xc0746800   (1119 kB)
>      .text : 0xc0400000 - 0xc062e92d   (2234 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=128, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 6788.50 BogoMIPS (lpj=3394250)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU0: Thermal monitoring enabled
>using mwait in idle threads.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 03
>Booting processor 1/1 ip 4000
>CPU 1 irqstacks, hard=c07b9000 soft=c0799000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6783.18 BogoMIPS (lpj=3391592)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 03
>Total of 2 processors activated (13571.68 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=3696 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>  domain 1: span 00000003
>   groups: 00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>  domain 1: span 00000003
>   groups: 00000003
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  6:10:53  Date: 07/14/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: DMI System Vendor: Dell Inc.                
>ACPI: DMI Product Name: Precision WorkStation 380    
>ACPI: DMI Product Version: 
>ACPI: DMI Board Name: 0CJ774
>ACPI: DMI BIOS Vendor: Dell Inc.                
>ACPI: DMI BIOS Date: 01/08/2007
>ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
>ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>system 00:01: ioport range 0x800-0x85f has been reserved
>system 00:01: ioport range 0xc00-0xc7f has been reserved
>system 00:01: ioport range 0x860-0x8ff could not be reserved
>system 00:09: iomem range 0x0-0x9ffff could not be reserved
>system 00:09: iomem range 0x100000-0xffffff could not be reserved
>system 00:09: iomem range 0x1000000-0x7fe8abff could not be reserved
>system 00:09: iomem range 0xf0000-0xfffff could not be reserved
>system 00:09: iomem range 0xc0000-0xd3fff could not be reserved
>system 00:09: iomem range 0xfec00000-0xfecfffff could not be reserved
>system 00:09: iomem range 0xfee00000-0xfeefffff could not be reserved
>system 00:09: iomem range 0xfed20000-0xfed9ffff could not be reserved
>system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
>system 00:09: iomem range 0xffc00000-0xffffffff could not be reserved
>system 00:0a: iomem range 0xf0000000-0xf3ffffff could not be reserved
>system 00:0a: iomem range 0xfeda0000-0xfedacfff has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: 0xf8000000-0xfeafffff
>  PREFETCH window: 0x00000000e8000000-0x00000000efffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: 0xf7f00000-0xf7ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: disabled.
>  MEM window: 0xf7e00000-0xf7efffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: 0xf7d00000-0xf7dfffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2638k freed
>Simple Boot Flag at 0x7a set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1216015853.422:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>Allocate Port Service[0000:00:1c.4:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>Allocate Port Service[0000:00:1c.5:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: ACPI0007:01 is registered as cooling_device1
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one day
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 0:308:165
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 908k
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25.9-76.fc9.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25.9-76.fc9.i686 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hub 1-0:1.0: unable to enumerate USB device on port 6
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25.9-76.fc9.i686 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25.9-76.fc9.i686 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25.9-76.fc9.i686 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>usb 4-2: new low speed USB device using uhci_hcd and address 2
>usb 4-2: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input2
>input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2
>usb 4-2: New USB device found, idVendor=046d, idProduct=c00e
>usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-2: Product: USB-PS/2 Optical Mouse
>usb 4-2: Manufacturer: Logitech
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>ata1.00: ATAPI: HL-DT-ST DVD+/-RW GWA4164B, E111, max UDMA/33
>ata1.00: configured for UDMA/33
>ata2: port disabled. ignoring.
>scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GWA4164B E111 PQ: 0 ANSI: 5
>ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 20
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20
>ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20
>ata3.00: ATA-7: WDC WD1600JS-75NCB1, 10.02E01, max UDMA/133
>ata3.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD1600JS-75N 10.0 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
>sd 2:0:0:0: [sda] Attached SCSI disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>type=1404 audit(1216015861.518:2): selinux=0 auid=4294967295 ses=4294967295
>scsi 0:0:0:0: Attached scsi generic sg0 type 5
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>input: PC Speaker as /devices/platform/pcspkr/input/input3
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>iTCO_vendor_support: vendor-support=0
>tg3.c:v3.91 (April 18, 2008)
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:13:72:17:96:c1
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
>ACPI: Power Button (CM) [VBTN]
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>iTCO_wdt: No card detected
>intel_rng: Firmware space is locked read-only. If you can't or
>intel_rng: don't want to disable this in firmware setup, and if
>intel_rng: you are certain that your system has a functional
>intel_rng: RNG, try using the 'no_fwh_detect' option.
>parport_pc 00:07: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 18
>firewire_ohci: Added fw-ohci device 0000:05:02.0, OHCI version 1.0
>firewire_core: created device fw0: GUID 0000d10081293047, S400
>ppdev: user-space parallel port driver
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401
>ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x1
>ALSA sound/pci/hda/hda_codec.c:2236: hda_codec: model 'dell-d21' is selected for config 1028:1a8 (unknown Dell)
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 08 pin config 400001f0
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 09 pin config 400001f1
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0d pin config 02214030
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0e pin config 01014010
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0f pin config 02a19020
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 10 pin config 01a19021
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 11 pin config 90100140
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 12 pin config 01813122
>ALSA sound/pci/hda/hda_codec.c:2857: autoconfig: line_outs=1 (0xe/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2861:    speaker_outs=1 (0x11/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2865:    hp_outs=1 (0xd/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2866:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:2874:    inputs: mic=0x10, fmic=0xf, line=0x12, fline=0x0, cd=0x0, aux=0x0
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>[drm] Detected an NV40 generation card (0x043e00a4)
>[drm] Initialized nouveau 0.0.10 20060213 on minor 0
>[drm] Allocating FIFO number 0
>[drm] nouveau_fifo_alloc: initialised FIFO 0
>[drm] Allocating FIFO number 1
>[drm] nouveau_fifo_alloc: initialised FIFO 1
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda7, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda8, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2040244k swap on /dev/sda3.  Priority:-1 extents:1 across:2040244k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure.
>fuse init (API version 7.9)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>[drm] nouveau_fifo_free: freeing fifo 1
>[drm] nouveau_fifo_free: freeing fifo 0
>[drm] Allocating FIFO number 0
>[drm] nouveau_fifo_alloc: initialised FIFO 0
>[drm] Allocating FIFO number 1
>[drm] nouveau_fifo_alloc: initialised FIFO 1
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Actions: View

Attachments on bug 459405: 314477 | 314478 | 314479