Attachment 314517 Details for Bug 459478 – Debug kernel boot log, where the problem is seen

Debug kernel boot log, where the problem is seen

bootlog_debugkernel.txt (text/plain), 41.55 KB, created by IBM Bug Proxy on 2008-08-19 09:03:45 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: IBM Bug Proxy

Created: 2008-08-19 09:03:45 UTC

Size: 41.55 KB

patch

obsolete

>ACPI: XSDT AFFCFF00, 0044 (r1 IBM    SERBLADE     1001 IBM  45444F43)
>ACPI: FACP AFFCFE40, 0084 (r2 IBM    SERBLADE     1001 IBM  45444F43)
>ACPI: DSDT AFFBCDEB, 2840 (r2 IBM    SERBLADE     1000 INTL 20060707)
>ACPI: FACS AFFCBE80, 0040
>ACPI: APIC AFFCFD40, 00C8 (r1 IBM    SERBLADE     1001 IBM  45444F43)
>ACPI: MCFG AFFCFD00, 003C (r1 IBM    SERBLADE     1001 IBM  45444F43)
>ACPI: ERST AFFCBEC0, 0230 (r1 IBM    SERBLADE     1001 IBM  45444F43)
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000450000000
>Bootmem setup node 0 0000000000000000-0000000450000000
>Reserving 256MB of memory at 32MB for crashkernel (System RAM: 17664MB)
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  4521984
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0:        0 ->      157
>    0:      256 ->   720828
>    0:  1048576 ->  4521984
>ACPI: PM-Timer IO Port: 0x588
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
>Processor #4
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>Processor #2
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>Processor #3
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
>Processor #5
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
>Processor #6
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
>Processor #7
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 14, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x0d] address[0xfec80000] gsi_base[24])
>IOAPIC[1]: apic_id 13, address 0xfec80000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009d000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>swsusp: Registered nosave memory region: 00000000affbc000 - 00000000affbd000
>swsusp: Registered nosave memory region: 00000000affbd000 - 00000000affd0000
>swsusp: Registered nosave memory region: 00000000affd0000 - 00000000b0000000
>swsusp: Registered nosave memory region: 00000000b0000000 - 00000000e0000000
>swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000
>swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000
>swsusp: Registered nosave memory region: 00000000fec00000 - 0000000100000000
>Allocating PCI resources starting at b4000000 (gap: b0000000:30000000)
>SMP: Allowing 8 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 438056 bytes of per cpu data
>Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 3943704
>Policy zone: Normal
>Kernel command line: root=/dev/sda3 ro console=ttyS1,19200 crashkernel=256M@32M 
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 3000.104 MHz processor.
>Console: colour VGA+ 80x25
>console [ttyS1] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:      8
>... MAX_LOCK_DEPTH:             30
>... MAX_LOCKDEP_KEYS:         2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     16384
>... MAX_LOCKDEP_CHAINS:      32768
>... CHAINHASH_SIZE:          16384
> memory used by lock dependency info: 2672 kB
> per task-struct memory footprint: 2160 bytes
>Checking aperture...
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing software IO TLB between 0x59591000 - 0x5d591000
>Memory: 15509024k/18087936k available (2744k kernel code, 1267524k reserved, 1573k data, 776k init)
>Calibrating delay using timer specific routine.. 6004.06 BogoMIPS (lpj=3002032)
>Security Framework initialized
>SELinux:  Initializing.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 307 Objects with 42 Devices 81 Methods 9 Regions
> tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>Using local APIC timer interrupts.
>Detected 20.834 MHz APIC timer.
>lockdep: not fixing up alternatives.
>Booting processor 1/8 APIC 0x4
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6000.28 BogoMIPS (lpj=3000141)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>CPU 1/4 -> Node 0
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 0
>CPU1: Thermal monitoring enabled (TM1)
>Intel(R) Xeon(R) CPU           E5450  @ 3.00GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>lockdep: not fixing up alternatives.
>Booting processor 2/8 APIC 0x1
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 6000.28 BogoMIPS (lpj=3000140)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>CPU 2/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU2: Thermal monitoring enabled (TM1)
>Intel(R) Xeon(R) CPU           E5450  @ 3.00GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#2]: passed.
>lockdep: not fixing up alternatives.
>Booting processor 3/8 APIC 0x2
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 6000.23 BogoMIPS (lpj=3000117)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>CPU 3/2 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 2
>CPU3: Thermal monitoring enabled (TM1)
>Intel(R) Xeon(R) CPU           E5450  @ 3.00GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#3]: passed.
>lockdep: not fixing up alternatives.
>Booting processor 4/8 APIC 0x3
>Initializing CPU#4
>Calibrating delay using timer specific routine.. 6000.26 BogoMIPS (lpj=3000133)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>CPU 4/3 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 3
>CPU4: Thermal monitoring enabled (TM1)
>Intel(R) Xeon(R) CPU           E5450  @ 3.00GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#4]: passed.
>lockdep: not fixing up alternatives.
>Booting processor 5/8 APIC 0x5
>Initializing CPU#5
>Calibrating delay using timer specific routine.. 6000.27 BogoMIPS (lpj=3000138)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>CPU 5/5 -> Node 0
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 1
>CPU5: Thermal monitoring enabled (TM1)
>Intel(R) Xeon(R) CPU           E5450  @ 3.00GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#5]: passed.
>lockdep: not fixing up alternatives.
>Booting processor 6/8 APIC 0x6
>Initializing CPU#6
>Calibrating delay using timer specific routine.. 6000.28 BogoMIPS (lpj=3000144)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>CPU 6/6 -> Node 0
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 2
>CPU6: Thermal monitoring enabled (TM1)
>Intel(R) Xeon(R) CPU           E5450  @ 3.00GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#6]: passed.
>lockdep: not fixing up alternatives.
>Booting processor 7/8 APIC 0x7
>Initializing CPU#7
>Calibrating delay using timer specific routine.. 6000.30 BogoMIPS (lpj=3000151)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>CPU 7/7 -> Node 0
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 3
>CPU7: Thermal monitoring enabled (TM1)
>Intel(R) Xeon(R) CPU           E5450  @ 3.00GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#7]: passed.
>Brought up 8 CPUs
>khelper used greatest stack depth: 5776 bytes left
>net_namespace: 184 bytes
>Time:  7:55:39  Date: 08/05/08
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000 - e0ffffff
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 1 Wake, Enabled 0 Runtime GPEs in this block
>Completing Region/Field/Buffer/Package initialization:............................................
>Initialized 6/9 Regions 4/4 Fields 11/11 Buffers 23/24 Packages (316 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:
>Executed 0 _INI methods requiring 0 _STA executions (examined 52 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Link [LP00] (IRQs *5)
>ACPI: PCI Interrupt Link [LP01] (IRQs *5)
>ACPI: PCI Interrupt Link [LP02] (IRQs *11)
>ACPI: PCI Interrupt Link [LP03] (IRQs *5)
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP04] (IRQs) *0, disabled.
>ACPI: PCI Interrupt Link [LP05] (IRQs *5)
>ACPI: PCI Interrupt Link [LP06] (IRQs *11)
>ACPI: PCI Interrupt Link [LP07] (IRQs *5)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>tracer: 1286 pages allocated for 65536<6> entries of 80 bytes
>   actual entries 65586
>ACPI: RTC can wake from S4
>system 00:01: ioport range 0xc00-0xc1f has been reserved
>system 00:01: ioport range 0xc60-0xc67 has been reserved
>system 00:0a: ioport range 0xc28-0xc28 has been reserved
>system 00:0a: ioport range 0xc2c-0xc2c has been reserved
>system 00:0b: ioport range 0x400-0x43f has been reserved
>system 00:0b: ioport range 0x440-0x45f has been reserved
>system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
>system 00:0b: ioport range 0xc60-0xc7f could not be reserved
>system 00:0b: ioport range 0xce0-0xcff could not be reserved
>system 00:0b: ioport range 0x580-0x5ff has been reserved
>system 00:0b: ioport range 0xc30-0xc30 has been reserved
>system 00:0b: ioport range 0xc34-0xc34 has been reserved
>system 00:0b: ioport range 0xc40-0xc5f has been reserved
>system 00:0b: ioport range 0xca8-0xca8 has been reserved
>system 00:0b: ioport range 0xcac-0xcac has been reserved
>system 00:0b: ioport range 0xcb0-0xcb0 has been reserved
>system 00:0b: ioport range 0xcb4-0xcb4 has been reserved
>system 00:0b: ioport range 0xcc0-0xcdf has been reserved
>system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:0b: iomem range 0xfe000000-0xfe01ffff has been reserved
>system 00:0b: iomem range 0xfe020000-0xfe6fffff has been reserved
>system 00:0b: iomem range 0xfe700400-0xfebfffff has been reserved
>system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved
>PCI: Bridge: 0000:09:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:09:01.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:07:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:07:00.3
>  IO window: 5000-5fff
>  MEM window: d5000000-d6ffffff
>  PREFETCH window: b4200000-b42fffff
>PCI: Bridge: 0000:00:02.0
>  IO window: 5000-5fff
>  MEM window: d5000000-d6ffffff
>  PREFETCH window: b4200000-b42fffff
>PCI: Bridge: 0000:00:03.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: b6000000-d4ffffff
>  PREFETCH window: b4300000-b43fffff
>PCI: Bridge: 0000:00:05.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:03:00.0
>  IO window: disabled.
>  MEM window: da000000-dcffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: da000000-dcffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:05:00.0
>  IO window: disabled.
>  MEM window: d7000000-d9ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:07.0
>  IO window: disabled.
>  MEM window: d7000000-d9ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.0
>  IO window: 4000-4fff
>  MEM window: dd000000-deffffff
>  PREFETCH window: b4000000-b41fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 3000-3fff
>  MEM window: f8000000-f8ffffff
>  PREFETCH window: f0000000-f7ffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 11, 12582912 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3689k freed
>Initializing RT-Tester: OK
>audit: initializing netlink socket (disabled)
>audit(1217922938.514:1): initialized
>krcupreemptd setsched 0
>  prio = 98
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>khelper used greatest stack depth: 5256 bytes left
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Processor [CPU2] (supports 8 throttling states)
>ACPI: Processor [CPU3] (supports 8 throttling states)
>ACPI: Processor [CPU4] (supports 8 throttling states)
>ACPI: Processor [CPU5] (supports 8 throttling states)
>ACPI: Processor [CPU6] (supports 8 throttling states)
>ACPI: Processor [CPU7] (supports 8 throttling states)
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>erial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 4:19:925
>*****************************************************************************
>*                                                                           *
>*  REMINDER, the following debugging options are turned on in your .config: *
>*                                                                           *
>*        CONFIG_DEBUG_RT_MUTEXES                                            *
>*        CONFIG_LOCKDEP                                                     *
>*                                                                           *
>*  they may increase runtime overhead and latencies.                        *
>*                                                                           *
>*****************************************************************************
>Freeing unused kernel memory: 776k freed
>Write protecting the kernel read-only data: 1172k
>
>Red Hat nash version 5.1.19.6 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Setting up hotplug.
>Creating block device nodes.
>Loading ehci-hcd.ko module
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9000000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 5 ports detected
>insmod used greatest stack depth: 4296 bytes left
>Loading ohci-hcd.ko module
>Loading uhci-hcd.ko module
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 18 (level, low) -> IRQ 18
>usb 1-3: new high speed USB device using ehci_hcd and address 2
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 18, io base 0x00002200
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>usb 1-3: configuration #1 chosen from 1 choice
>hub 1-3:1.0: USB hub found
>hub 1-3:1.0: 2 ports detected
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>usb 1-3.1: new high speed USB device using ehci_hcd and address 3
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00002600
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>usb 1-3.1: configuration #1 chosen from 1 choice
>hub 1-3.1:1.0: USB hub found
>hub 1-3.1:1.0: 4 ports detected
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 19, io base 0x00002800
>usb 1-3.1.2: new high speed USB device using ehci_hcd and address 4
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>usb 1-3.1.2: configuration #1 chosen from 1 choice
>hub 1-3.1.2:1.0: USB hub found
>hub 1-3.1.2:1.0: 4 ports detected
>hub 4-0:1.0: 2 ports detected
>usb 1-3.1.2.3: new high speed USB device using ehci_hcd and address 5
>Loading mbcache.ko module
>Loading jbd.ko module
>usb 1-3.1.2.3: configuration #1 chosen from 1 choice
>Loading ext3.ko module
>Loading scsi_mod.ko module
>libusual: modprobe for usb-storage succeeded, but module is not present
>SCSI subsystem initialized
>Loading sd_mod.ko module
>Driver 'sd' needs updating - please use bus_type methods
>Loading libata.ko module
>Loading ata_piixata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>.ko module
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2a00 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2a08 irq 15
>Loading ehci-hcdinput: PC Speaker as /class/input/input1
>.ko module
>insmod: error inserting '/lib/ehci-hcd.ko': -1 File exists
>Loading pcspkr.ko module
>Loading uhci-hcd.ko module
>insmod: error inserting '/lib/uhci-hcd.ko': -1 File exists
>Loading scsi_transport_sas.ko module
>Loading mptbase.Fusion MPT base driver 3.04.06
>Copyright (c) 1999-2007 LSI Corporation
>ko module
>Loading mptscsih.ko module
>LoadFusion MPT SAS Host driver 3.04.06
>ing mptsas.ko moACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>dule
>mptbase: ioc0: Initiating bringup
>ioc0: LSISAS1064E B1: Capabilities={Initiator}
>scsi2 : ioc0: LSISAS1064E B1, FwRev=01160000h, Ports=1, MaxQ=286, IRQ=16
>scsi 2:0:0:0: Direct-Access     IBM-ESXS ST973402SS       B526 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sda] 143374000 512-byte hardware sectors (73407 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
>sd 2:0:0:0: [sda] 143374000 512-byte hardware sectors (73407 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
> sda: sda1 sda2 sda3 sda4
>sd 2:0:0:0: [sda] Attached SCSI disk
>insmod used greatest stack depth: 2120 bytes left
>Loading sg.ko module
>sd 2:0:0:0: Attached scsi generic sg0 type 0
>Loading usb-storInitializing USB Mass Storage driver...
>age.ko module
>scsi3 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>Waiting for driver initialization.
>scsi 3:0:0:0: CD-ROM            MATSHITA UJDA765aDVD/CDRW 1.20 PQ: 0 ANSI: 0
>scsi 3:0:0:0: Attached scsi generic sg1 type 5
>Loading autofs4.ko module
>Loading bluetooth.ko module
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Loading l2cap.koBluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
> module
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>Loading hidp.ko module
>Loading rfcomm.ko module
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Loading sunrpc.ko module
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>Loading nf_conntnf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>rack.ko module
>Loading nf_conntrack_netbios_ns.ko module
>Loading nf_conntrack_Netfilter messages via NETLINK v0.30.
>netbios_ns.ko moip_tables: (C) 2000-2006 Netfilter Core Team
>dule
>insmod: error inserting '/lib/nf_conntrackNET: Registered protocol family 10
>_netbios_ns.ko': -1 File exists
>Loading x_tablelo: Disabled Privacy Extensions
>s.ko module
>Loading ipt_REJECT.ko module
>Loading xt_state.ko module
>Loading nip6_tables: (C) 2000-2006 Netfilter Core Team
>f_conntrack_ipv4.ko module
>Loading nf_conntrack_ipv4.ko module
>insmod: error inserting '/lib/nf_conntrack_ipv4.ko': -1 File exists
>Loading nfnetlink.ko moduldevice-mapper: uevent: version 1.0.3
>e
>Loading ip_tables.ko module
>Loading iptable_filter.ko moduledevice-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>
>Loading ipv6.ko module
>Loadindevice-mapper: multipath: version 1.0.5 loaded
>g ip6t_REJECT.ko module
>Loading xt_tcpudp.ko module
>Loading ip6_tables.ko module
>Loading ip6table_filter.ko module
>Loading dm-mod.ko module
>Loading dm-mirror.ko module
>Loading dm-mirror.ko module
>insmod: error inserting '/lib/dm-mirror.ko': -1 File exists
>Loading scsi_dh.ko module
>Loading dm-multipath.ko module
>Loading dm-multipath.ko module
>insmod: error inserting '/libinput: Power Button (FF) as /class/input/input2
>/dm-multipath.ko': -1 File exists
>Loading dm-mod.ko module
>insACPI: Power Button (FF) [PWRF]
>mod: error inserting '/lib/dm-mod.ko': -1 File exists
>Loading output.ko module
>Loading video.ko module
>Loading sbshc.ko module
>Loading sbs.ko module
>Loading i2c-core.ko module
>Loading i2c-core.ko module
>insmod: error inserting '/lib/i2c-core.ko': -1 File exists
>Loading button.ko module
>Loading battery.ko module
>Loading asus_acpi.ko module
>insmod: error inserting '/lib/asus_acpi.ko': -1 No such device
>lp: driver loaded but no devices found
>Loading ac.ko module
>Loading parport.ko module
>Loading parport_pc.ko module
>Loading lp.ko module
>Loading cdrom.ko module
>Loading sr_mod.ko module
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>Loading scsi_tgt.ko module
>Loading scsi_transport_fc.ko modQLogic Fibre Channel HBA Driver
>ule
>Loading qlaACPI: PCI Interrupt 0000:08:01.0[A] -> GSI 25 (level, low) -> IRQ 25
>2xxx.ko module
>qla2xxx 0000:08:01.0: Found an ISP2422, irq 25, iobase 0xffffc20001856000
>qla2xxx 0000:08:01.0: Configuring PCI space...
>qla2xxx 0000:08:01.0: Configure NVRAM parameters...
>qla2xxx 0000:08:01.0: Verifying loaded RISC code...
>qla2xxx 0000:08:01.0: Allocated (64 KB) for EFT...
>qla2xxx 0000:08:01.0: Allocated (901 KB) for firmware dump...
>scsi4 : qla2xxx
>qla2xxx 0000:08:01.0: LOOP UP detected (4 Gbps).
>qla2xxx 0000:08:01.0: 
> QLogic Fibre Channel HBA Driver: 8.02.00-k5
>  QLogic QMI2472 - QLE220
>  ISP2422: PCI-X Mode 1 (133 MHz) @ 0000:08:01.0 hdma+, host#=4, fw=4.00.27 [IP] 
>ACPI: PCI Interrupt 0000:08:01.1[B] -> GSI 26 (level, low) -> IRQ 26
>qla2xxx 0000:08:01.1: Found an ISP2422, irq 26, iobase 0xffffc2000185e000
>qla2xxx 0000:08:01.1: Configuring PCI space...
>qla2xxx 0000:08:01.1: Configure NVRAM parameters...
>qla2xxx 0000:08:01.1: Verifying loaded RISC code...
>qla2xxx 0000:08:01.1: Allocated (64 KB) for EFT...
>qla2xxx 0000:08:01.1: Allocated (901 KB) for firmware dump...
>scsi5 : qla2xxx
>qla2xxx 0000:08:01.1: LOOP UP detected (4 Gbps).
>qla2xxx 0000:08:01.1: 
> QLogic Fibre Channel HBA Driver: 8.02.00-k5
>  QLogic QMI2472 - QLE220
>  ISP2422: PCI-X Mode 1 (133 MHz) @ 0000:08:01.1 hdma+, host#=5, fw=4.00.27 [IP] 
>Loading usb-storage.ko module
>insmod: error inserting '/lib/usb-storage.ko': -1 File exists
>Waiting for driver initialization.
>Loading shpchp.kshpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>o module
>NetXen Network Driver version 3.4.18 
>NetXen function 0, class 28000 will not be enabled.
>Loading netxen_nNetXen Network Driver version 3.4.18 
>ic.ko module
>ACPI: PCI Interrupt 0000:0c:00.2[A] -> GSI 17 (level, low) -> IRQ 17
>NetXen: read 0x0080000f for reset reg.
>State: 0x55555555
>netxen_nic: XGbE board initialized
>NetXen Network Driver version 3.4.18 
>ACPI: PCI Interrupt 0000:0c:00.3[A] -> GSI 17 (level, low) -> IRQ 17
>netxen_nic: XGbE board initialized
>Loading bnx2.ko Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.6.9 (December 8, 2007)
>module
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>eth2: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem da000000, IRQ 17, node addr 00:1a:64:58:62:4e
>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 19
>eth3: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem d8000000, IRQ 19, node addr 00:1a:64:58:62:50
>Loading ehci-hcd.ko module
>insmod: error inserting '/lib/ehci-hcd.ko': -1 File exists
>Loading ohci-hcd.ko module
>insmod: error inserting '/lib/ohci-hcd.ko': -1 File exists
>Loading uhci-hcd.ko module
>insmod: error inserting '/lib/uhci-hcd.ko': -1 File exists
>Waiting for driver initialization.
>Scanning and configuring dmraid supported devices
>Trying to resume from /dev/sda2
>No suspend signature on swap, not resuming.
>Creating root device.
>Mounting root filesystem.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Setting up other filesystems.
>Setting up new root fs
>no fstab.sys, mounting internal defaults
>Switching to new root and running init.
>unmounting old /dev
>unmounting old /proc
>unmounting old /sys
>SELinux:  Disabled at runtime.
>audit(1217923378.750:2): selinux=0 auid=4294967295
>INIT: version 2.86 booting
>                Welcome to Red Hat Enterprise Linux Server
>                Press 'I' to enter interactive startup.
>^[^BCannot access the Hardware Clock via any known method.
>Use the --debug option to see the details of our search for an access method.
>Setting clock  (localtime): Tue Aug  5 04:04:27 EDT 2008 [  OK  ]
>Starting udev: 
>=======================================================
>[ INFO: possible circular locking dependency detected ]
>[ 2.6.24.7-74ibmrt2.5debug #1
>-------------------------------------------------------
>swapper/0 is trying to acquire lock:
> (console_sem.lock){+...}, at: [<ffffffff812a5765>] rt_mutex_slowunlock+0xf/0x6f
>
>but task is already holding lock:
> (&rq->rq_lock_key#8){+...}, at: [<ffffffff81038541>] scheduler_tick+0x52/0x1ca
>
>which lock already depends on the new lock.
>
>
>the existing dependency chain (in reverse order) is:
>
>-> #4 (&rq->rq_lock_key#8){+...}:
>       [<ffffffff81060e94>] __lock_acquire+0xb1e/0xcdc
>       [<ffffffff8103242b>] double_lock_balance+0x57/0x60
>       [<ffffffff810610e0>] lock_acquire+0x8e/0xb2
>       [<ffffffff8103242b>] double_lock_balance+0x57/0x60
>       [<ffffffff812a779f>] __spin_lock+0x31/0x5e
>       [<ffffffff8103242b>] double_lock_balance+0x57/0x60
>       [<ffffffff812a4724>] __schedule+0x2f5/0x804
>       [<ffffffff8105fe36>] trace_hardirqs_on+0xd/0xf
>       [<ffffffff812a4f8b>] schedule+0xe4/0x109
>       [<ffffffff8104474c>] ksoftirqd+0xb7/0x26c
>       [<ffffffff8105fdfe>] trace_hardirqs_on_caller+0x11c/0x147
>       [<ffffffff81044695>] ksoftirqd+0x0/0x26c
>       [<ffffffff81053732>] kthread+0x49/0x77
>       [<ffffffff8100d328>] child_rip+0xa/0x12
>       [<ffffffff8100ca13>] restore_args+0x0/0x30
>       [<ffffffff810536e9>] kthread+0x0/0x77
>       [<ffffffff8100d31e>] child_rip+0x0/0x12
>       [<ffffffffffffffff>] 0xffffffffffffffff
>
>-> #3 (&rq->rq_lock_key#7){+...}:
>       [<ffffffff81060e94>] __lock_acquire+0xb1e/0xcdc
>       [<ffffffff8103246d>] double_rq_lock+0x39/0x4e
>       [<ffffffff810610e0>] lock_acquire+0x8e/0xb2
>       [<ffffffff8103246d>] double_rq_lock+0x39/0x4e
>       [<ffffffff812a779f>] __spin_lock+0x31/0x5e
>       [<ffffffff8103246d>] double_rq_lock+0x39/0x4e
>       [<ffffffff81034d3a>] __migrate_task+0x72/0x122
>       [<ffffffff81039593>] migration_thread+0x1ac/0x212
>       [<ffffffff810393e7>] migration_thread+0x0/0x212
>       [<ffffffff81053732>] kthread+0x49/0x77
>       [<ffffffff8100d328>] child_rip+0xa/0x12
>       [<ffffffff8100ca13>] restore_args+0x0/0x30
>       [<ffffffff810536e9>] kthread+0x0/0x77
>       [<ffffffff8100d31e>] child_rip+0x0/0x12
>       [<ffffffffffffffff>] 0xffffffffffffffff
>
>-> #2 (&rq->rq_lock_key){+...}:
>       [<ffffffff81060e94>] __lock_acquire+0xb1e/0xcdc
>       [<ffffffff810346f3>] task_rq_lock+0x42/0x74
>       [<ffffffff810610e0>] lock_acquire+0x8e/0xb2
>       [<ffffffff810346f3>] task_rq_lock+0x42/0x74
>       [<ffffffff812a779f>] __spin_lock+0x31/0x5e
>       [<ffffffff810346f3>] task_rq_lock+0x42/0x74
>       [<ffffffff8103af61>] task_setprio+0x34/0x1ba
>       [<ffffffff811537e2>] plist_check_list+0x35/0x42
>       [<ffffffff81065fcf>] __rt_mutex_adjust_prio+0x20/0x25
>       [<ffffffff81067313>] task_blocks_on_rt_mutex+0x1f7/0x261
>       [<ffffffff812a679a>] rt_spin_lock_slowlock+0xe0/0x27f
>       [<ffffffff8105d9d6>] get_lock_stats+0x16/0x49
>       [<ffffffff812a6faf>] __rt_spin_lock+0x55/0x59
>       [<ffffffff812a711d>] rt_spin_lock+0x49/0x56
>       [<ffffffff81053597>] kthreadd+0x126/0x14b
>       [<ffffffff8100d328>] child_rip+0xa/0x12
>       [<ffffffff8100ca13>] restore_args+0x0/0x30
>       [<ffffffff81053471>] kthreadd+0x0/0x14b
>       [<ffffffff8100d31e>] child_rip+0x0/0x12
>       [<ffffffffffffffff>] 0xffffffffffffffff
>
>-> #1 ((raw_spinlock_t *)(&p->pi_lock)){....}:
>       [<ffffffff81060e94>] __lock_acquire+0xb1e/0xcdc
>       [<ffffffff81067153>] task_blocks_on_rt_mutex+0x37/0x261
>       [<ffffffff810610e0>] lock_acquire+0x8e/0xb2
>       [<ffffffff81067153>] task_blocks_on_rt_mutex+0x37/0x261
>       [<ffffffff812a779f>] __spin_lock+0x31/0x5e
>       [<ffffffff81067153>] task_blocks_on_rt_mutex+0x37/0x261
>       [<ffffffff812a656c>] rt_mutex_slowlock+0x1a8/0x2f6
>       [<ffffffff812a57f3>] rt_mutex_lock+0x2e/0x32
>       [<ffffffff81069019>] rt_down+0x16/0x30
>       [<ffffffff8103ec44>] acquire_console_sem+0x42/0x58
>       [<ffffffff8159da16>] fb_console_init+0x12/0x129
>       [<ffffffff815829c7>] kernel_init+0x182/0x3df
>       [<ffffffff8105fe36>] trace_hardirqs_on+0xd/0xf
>       [<ffffffff812a6a5b>] trace_hardirqs_on_thunk+0x3a/0x3f
>       [<ffffffff8105fdfe>] trace_hardirqs_on_caller+0x11c/0x147
>       [<ffffffff8100d328>] child_rip+0xa/0x12
>       [<ffffffff8100ca13>] restore_args+0x0/0x30
>       [<ffffffff81582845>] kernel_init+0x0/0x3df
>       [<ffffffff8100d31e>] child_rip+0x0/0x12
>       [<ffffffffffffffff>] 0xffffffffffffffff
>
>-> #0 (console_sem.lock){+...}:
>       [<ffffffffffffffff>] 0xffffffffffffffff
>
>other info that might help us debug this:
>
>1 lock held by swapper/0:
> #0:  (&rq->rq_lock_key#8){+...}, at: [<ffffffff81038541>] scheduler_tick+0x52/0x1ca
>
>stack backtrace:
>Pid: 0, comm: swapper Not tainted 2.6.24.7-74ibmrt2.5debug #1
>
>Call Trace:
> <IRQ>  [<ffffffff8105eb05>] print_circular_bug_tail+0x70/0x7b
> [<ffffffff8105e1fd>] ? print_circular_bug_entry+0x48/0x4e
> [<ffffffff81060d96>] __lock_acquire+0xa20/0xcdc
> [<ffffffff812a5765>] ? rt_mutex_slowunlock+0xf/0x6f
> [<ffffffff810610e0>] lock_acquire+0x8e/0xb2
> [<ffffffff812a5765>] ? rt_mutex_slowunlock+0xf/0x6f
> [<ffffffff812a7bd2>] __spin_lock_irqsave+0x40/0x73
> [<ffffffff812a5765>] rt_mutex_slowunlock+0xf/0x6f
> [<ffffffff812a569f>] rt_mutex_unlock+0x9/0xb
> [<ffffffff81068d0e>] rt_up+0x2c/0x52
> [<ffffffff8103ebb5>] release_console_sem+0x1a0/0x1cf
> [<ffffffff8103f255>] vprintk+0x325/0x37e
> [<ffffffff81093dde>] ? cpupri_set+0xc5/0xd8
> [<ffffffff8103f315>] printk+0x67/0x69
> [<ffffffff81037f9b>] ? add_preempt_count+0x3b/0x11f
> [<ffffffff811507cd>] ? __delay+0x83/0xa4
> [<ffffffff812a84fe>] _raw_spin_lock+0xf6/0x123
> [<ffffffff812a77bf>] __spin_lock+0x51/0x5e
> [<ffffffff81038541>] scheduler_tick+0x52/0x1ca
> [<ffffffff81048808>] update_process_times+0x30/0x5a
> [<ffffffff8105c477>] tick_sched_timer+0x8b/0xbe
> [<ffffffff810571af>] hrtimer_interrupt+0x158/0x1e9
> [<ffffffff81020492>] smp_local_timer_interrupt+0x58/0x5c
> [<ffffffff81020b66>] smp_apic_timer_interrupt+0x3a/0x54
> [<ffffffff8100af79>] ? mwait_idle+0x0/0x78
> [<ffffffff8100d14b>] apic_timer_interrupt+0x6b/0x70
> <EOI>  [<ffffffff810882c1>] ? __rcu_read_unlock+0x7d/0x95
> [<ffffffff8100afe7>] ? mwait_idle+0x6e/0x78
> [<ffffffff8100abab>] ? enter_idle+0x22/0x24
> [<ffffffff8100aea8>] ? cpu_idle+0xa3/0x102
> [<ffffffff8101ffcc>] ? start_secondary+0x3af/0x3bf
>
>INFO: lockdep is turned off.
>---------------------------
>| preempt count: 00010004 ]
>| 4-level deep critical section nesting:
>----------------------------------------
>.. [<ffffffff8100aefc>] .... cpu_idle+0xf7/0x102
>.....[<ffffffff8101ffcc>] ..   ( <= start_secondary+0x3af/0x3bf)
>.. [<ffffffff812a7782>] .... __spin_lock+0x14/0x5e
>.....[<ffffffff81038541>] ..   ( <= scheduler_tick+0x52/0x1ca)
>.. [<ffffffff81068cf8>] .... rt_up+0x16/0x52
>.....[<ffffffff8103ebb5>] ..   ( <= release_console_sem+0x1a0/0x1cf)
>.. [<ffffffff812a7bb5>] .... __spin_lock_irqsave+0x23/0x73
>.....[<ffffffff812a5765>] ..   ( <= rt_mutex_slowunlock+0xf/0x6f)
>
>Pid: 0, comm: swapper Not tainted 2.6.24.7-74ibmrt2.5debug #1
>
>Call Trace:
> <IRQ>  [<ffffffff812a8503>] _raw_spin_lock+0xfb/0x123
> [<ffffffff812a77bf>] __spin_lock+0x51/0x5e
> [<ffffffff81038541>] scheduler_tick+0x52/0x1ca
> [<ffffffff81048808>] update_process_times+0x30/0x5a
> [<ffffffff8105c477>] tick_sched_timer+0x8b/0xbe
> [<ffffffff810571af>] hrtimer_interrupt+0x158/0x1e9
> [<ffffffff81020492>] smp_local_timer_interrupt+0x58/0x5c
> [<ffffffff81020b66>] smp_apic_timer_interrupt+0x3a/0x54
> [<ffffffff8100af79>] ? mwait_idle+0x0/0x78
> [<ffffffff8100d14b>] apic_timer_interrupt+0x6b/0x70
> <EOI>  [<ffffffff810882c1>] ? __rcu_read_unlock+0x7d/0x95
> [<ffffffff8100afe7>] ? mwait_idle+0x6e/0x78
> [<ffffffff8100abab>] ? enter_idle+0x22/0x24
> [<ffffffff8100aea8>] ? cpu_idle+0xa3/0x102
> [<ffffffff8101ffcc>] ? start_secondary+0x3af/0x3bf
>
>INFO: lockdep is turned off.
>---------------------------
>| preempt count: 00010002 ]
>| 2-level deep critical section nesting:
>----------------------------------------
>.. [<ffffffff8100aefc>] .... cpu_idle+0xf7/0x102
>.....[<ffffffff8101ffcc>] ..   ( <= start_secondary+0x3af/0x3bf)
>.. [<ffffffff812a7782>] .... __spin_lock+0x14/0x5e
>.....[<ffffffff81038541>] ..   ( <= scheduler_tick+0x52/0x1ca)
>
>Clocksource tsc unstable (delta = 299887679581 ns)
>iTCO_vendor_support: vendor-support=0
>EDAC MC: Ver: 2.1.0 Jul 31 2008
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x05e0)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>i5000_edac: Unknown symbol edac_mc_del_mc
>i5000_edac: Unknown symbol edac_mc_add_mc
>i5000_edac: Unknown symbol edac_pci_create_generic_ctl
>i5000_edac: Unknown symbol edac_mc_alloc
>i5000_edac: Unknown symbol edac_mc_handle_fbd_ce
>i5000_edac: Unknown symbol edac_mc_free
>i5000_edac: Unknown symbol edac_pci_release_generic_ctl
>i5000_edac: Unknown symbol edac_mc_handle_fbd_ue
>i5000_edac: Unknown symbol edac_mc_del_mc
>i5000_edac: Unknown symbol edac_mc_add_mc
>i5000_edac: Unknown symbol edac_pci_create_generic_ctl
>i5000_edac: Unknown symbol edac_mc_alloc
>i5000_edac: Unknown symbol edac_mc_handle_fbd_ce
>i5000_edac: Unknown symbol edac_mc_free
>i5000_edac: Unknown symbol edac_pci_release_generic_ctl
>i5000_edac: Unknown symbol edac_mc_handle_fbd_ue
>intel_rng: FWH not detected
>Floppy drive(s): fd0 is 1.44M
>EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0
>EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
>floppy0: no floppy controllers found
>[  OK  ]
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>Loading default keymap (us): [  OK  ]
>Setting hostname elm3c19:  [  OK  ]
>md: Autodetecting RAID arrays.
>md: Scanned 0 and added 0 devices.
>md: autorun ...
>md: ... autorun DONE.
>No devices found
>Setting up Logical Volume Management:   No volume groups found
>[  OK  ]
>Checking filesystems
>Checking all file systems.
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda3 
>/dev/sda3: clean, 162530/3057824 files, 1570589/6104700 blocks
>[/sbin/fsck.ext3 (1) -- /test] fsck.ext3 -a /dev/sda4 
>/dev/sda4: clean, 614273/4496800 files, 8229788/8988367 blocks (check in 4 mountEXT3 FS on sda3, internal journal
>s)
>[  OK  ]
>Remounting root filesystem in read-write mode:  [  OK  ]
>Mounting local filesyskjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>tems:  [  OK  ]
>Enabling local filesystem quotas:  [  OK  ]
>Enabling /etc/fstab swaps:  Adding 2096472k swap on /dev/sda2.  Priority:-1 extents:1 across:2096472k
>[  OK  ]
>INIT: Entering runlevel: 3
>Entering non-interactive startup
>Starting background readahead: [  OK  ]
>Flushing firewall rules: [  OK  ]
>Setting chains to policy ACCEPT: filter [  OK  ]
>Unloading ip6tables modules: [  OK  ]
>Flushing firewall rules: [  OK  ]
>Setting chains to policy ACCEPT: filter [  OK  ]
>Unloading iptables modules: [  OK  ]
>Bringing up loopback interface:  [  OK  ]
>Bringing up interface eth0:  
>Determining IP information for eth0...bnx2: eth0: using MSI
>bnx2: eth0 NIC SerDes Link is Up, 1000 Mbps full duplex
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> done.
>[  OK  ]
>Bringing up interface eth2:  NetXen XGb IMEZ Board S/N MZ71MK0156  Chip id 0x1
>NetXen GBE Board #-1, Chip id 0x1
>NetXen Firmware version 3.4.216
>netxen_nic: FW capabilities:0x1
>ctx_desc_phys_addr: 0xaf80c000
>cmd_desc_phys_addr: 0xaf840000
>netxen_nic: eth2 NIC Link is up
>ADDRCONF(NETDEV_UP): eth2: link is not ready
>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
>eth0: no IPv6 routers present
>[  OK  ]
>Bringing up interface eth3:  NetXen XGb IMEZ Board S/N MZ71MK0156  Chip id 0x1
>NetXen GBE Board #-1, Chip id 0x1
>NetXen Firmware version 3.4.216
>netxen_nic: FW capabilities:0x1
>ctx_desc_phys_addr: 0xaf83e000
>cmd_desc_phys_addr: 0xaf870000
>netxen_nic: eth3 NIC Link is up
>ADDRCONF(NETDEV_UP): eth3: link is not ready
>ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
>[  OK  ]
>Starting auditd: audit(1217924035.577:3): audit_pid=3615 old=0 by auid=4294967295
>[  OK  ]
>Starting system logger: [  OK  ]
>Starting kernel logger: [  OK  ]
>Starting RPC idmapd: Error: RPC MTAB does not exist.
>No kdump initial ramdisk found.[WARNING]
>Rebuilding /boot/initrd-2.6.24.7-74ibmrt2.5debugkdump.img
>Starting kdump:[  OK  ]
>Starting system message bus: [  OK  ]
>[  OK  ] Bluetooth services:[  OK  ]
>Mounting other filesystems:  [  OK  ]
>Starting PC/SC smart card daemon (pcscd): [  OK  ]
>Starting hidd: [  OK  ]
>Starting autofs:  Starting automount: [  OK  ]
>[  OK  ]
>Starting acpi daemon: [  OK  ]
>Starting sshd: [  OK  ]
>Starting cups: [  OK  ]
>Starting xinetd: [  OK  ]
>Starting ntpd: [  OK  ]
>IBM Real-Time HW Daemon: BIOS Real-Time module loaded.
>Starting ibm-prtmd: sys:1: DeprecationWarning: Non-ASCII character '\xc2' in file /usr/local/bin/ibm-prtmd on line 3, but no encoding declared; see http://www.python.org/peps/pep-0263.html for details
>IBM Real-Time HW Daemon: System Management Interrupts have been disable to
>IBM Real-Time HW Daemon: allow this system to run in Real-Time Mode.
>Stopping irq balancer
>Binding interrupts to cpu_mask: ffffffff,ffffffff... done.
>Starting console mouse services: [  OK  ]
>Starting crond: [  OK  ]
>Starting xfs: [  OK  ]
>Starting anacron: [  OK  ]
>Starting atd: [  OK  ]
>Starting yum-updatesd: [  OK  ]
>Starting Avahi daemon... [  OK  ]
>Starting HAL daemon: [  OK  ]
>Starting set_kthread_prio:  Setting kernel thread priorities: done
>[  OK  ]
>Starting smartd: [  OK  ]
>
>Red Hat Enterprise Linux Server release 5.2 (Tikanga)
>Kernel 2.6.24.7-74ibmrt2.5debug on an x86_64
>
>elm3c19 login:

Actions: View

Attachments on bug 459478: 314516 | 314517