Attachment 314868 Details for Bug 454193 – [Tyan Thunder K8W] dmesg output

[Tyan Thunder K8W] dmesg output

dmesg-output-tyan-thunder.txt (text/plain), 26.85 KB, created by Pieter de Rijk on 2008-08-23 16:58:14 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Pieter de Rijk

Created: 2008-08-23 16:58:14 UTC

Size: 26.85 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.25.14-108.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Mon Aug 4 13:46:35 EDT 2008
>Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000dbff0000 (usable)
> BIOS-e820: 00000000dbff0000 - 00000000dbfff000 (ACPI data)
> BIOS-e820: 00000000dbfff000 - 00000000dc000000 (ACPI NVS)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 901104) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP 000F70B0, 0024 (r2 ACPIAM)
>ACPI: XSDT DBFF0100, 004C (r1 A M I  OEMXSDT   8000713 MSFT       97)
>ACPI: FACP DBFF0281, 00F4 (r1 A M I  OEMFACP   8000713 MSFT       97)
>ACPI: DSDT DBFF0410, 3E43 (r1  0AAAA 0AAAA001        1 INTL  2002026)
>ACPI: FACS DBFFF000, 0040
>ACPI: APIC DBFF0380, 0084 (r1 A M I  OEMAPIC   8000713 MSFT       97)
>ACPI: OEMB DBFFF040, 005E (r1 A M I  OEMBIOS   8000713 MSFT       97)
>ACPI: HPET DBFF4260, 0038 (r1 A M I  OEMHPET   8000713 MSFT       97)
>ACPI: ASF! DBFF42A0, 0086 (r1 AMIASF AMDSTRET        1 INTL  2002026)
>Scanning NUMA topology in Northbridge 24
>Number of nodes 2
>Node 0 using interleaving mode 1/0
>No NUMA configuration found
>Faking a node at 0000000000000000-00000000dbff0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 901104) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-00000000dbff0000
>  NODE_DATA [000000000000d000 - 0000000000014fff]
>  bootmap [0000000000015000 -  00000000000307ff] pages 1c
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-75223b] TEXT DATA BSS
>early res: 3 [37c83000-37fef1b6] RAMDISK
>early res: 4 [9f400-a03ff] EBDA
>early res: 5 [8000-cfff] PGTABLE
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
> [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
> [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
> [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
> [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
> [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
> [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
> [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
> [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0
> [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0
> [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 on node 0
> [ffffe20003000000-ffffe200031fffff] PMD ->ffff810007200000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   901104
>On node 0 totalpages: 901007
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1373 pages reserved
>  DMA zone: 2570 pages, LIFO batch:0
>  DMA32 zone: 12263 pages used for memmap
>  DMA32 zone: 884745 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>Detected use of extended apic ids on hypertransport bus
>Detected use of extended apic ids on hypertransport bus
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x03] address[0xfc9ff000] gsi_base[24])
>IOAPIC[1]: apic_id 3, address 0xfc9ff000, GSI 24-27
>ACPI: IOAPIC (id[0x04] address[0xfc9fe000] gsi_base[28])
>IOAPIC[2]: apic_id 4, address 0xfc9fe000, GSI 28-31
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x102282a0 base: 0xfec01000
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at e0000000 (gap: dc000000:23780000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 42688 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 887315
>Policy zone: DMA32
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>Marking TSC unstable due to TSCs unsynchronized
>time.c: Detected 1594.227 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Node 0: aperture @ f0000000 size 128 MB
>Node 1: aperture @ f0000000 size 128 MB
>Memory: 3543292k/3604416k available (2629k kernel code, 60736k reserved, 1382k data, 352k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 3191.09 BogoMIPS (lpj=1595546)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0/0 -> Node 0
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 12454892
>Detected 12.454 MHz APIC timer.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3188.30 BogoMIPS (lpj=1594152)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1/1 -> Node 0
>AMD Opteron(tm) Processor 242 stepping 0a
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=6224 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000001 00000000,00000002
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000002 00000000,00000001
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>net_namespace: 1016 bytes
>Time:  8:50:49  Date: 08/23/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT]
>ACPI: PCI Root Bridge [PCIB] (0000:04)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.PBP2._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 0 of device 0000:04:00.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>agpgart: Detected AMD 8151 AGP Bridge rev B2
>agpgart: AGP aperture is 128M @ 0xf0000000
>hpet0: at MMIO 0xfec01000, IRQs 2, 8, 0
>hpet0: 3 32-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>system 00:09: ioport range 0x680-0x6ff has been reserved
>system 00:09: ioport range 0x295-0x296 has been reserved
>system 00:09: ioport range 0x778-0x77f has been reserved
>system 00:09: ioport range 0xb78-0xb7f has been reserved
>system 00:09: ioport range 0xf78-0xf7f has been reserved
>system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
>system 00:0a: ioport range 0x1000-0x10bf has been reserved
>system 00:0a: ioport range 0x10e0-0x10ff has been reserved
>system 00:0a: ioport range 0x10c0-0x10df has been reserved
>system 00:0a: ioport range 0xde00-0xde7f has been reserved
>system 00:0a: ioport range 0xde80-0xdeff has been reserved
>system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:0c: iomem range 0xfff80000-0xffffffff could not be reserved
>system 00:0c: iomem range 0xff780000-0xff7fffff could not be reserved
>system 00:0d: iomem range 0x0-0x9ffff could not be reserved
>system 00:0d: iomem range 0xc0000-0xdffff has been reserved
>system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0d: iomem range 0x100000-0xdbffffff could not be reserved
>system 00:0d: iomem range 0x0-0x0 could not be reserved
>PCI: Bridge: 0000:00:06.0
>  IO window: b000-bfff
>  MEM window: 0xfc600000-0xfc7fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0a.0
>  IO window: disabled.
>  MEM window: 0xfc800000-0xfc8fffff
>  PREFETCH window: 0x00000000dc300000-0x00000000dc3fffff
>PCI: Bridge: 0000:00:0b.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:04:01.0
>  IO window: disabled.
>  MEM window: 0xfca00000-0xfeafffff
>  PREFETCH window: 0x00000000dc500000-0x00000000ec4fffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3504k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1219481449.549:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:0a.0: MSI quirk detected; subordinate MSI disabled
>pci 0000:00:0a.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
>pci 0000:00:0b.0: MSI quirk detected; subordinate MSI disabled
>pci 0000:00:0b.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
>agpgart-amd64 0000:04:00.0: Chipset erratum: Disabling direct PCI/AGP transfers
>pci 0000:05:00.0: nv_msi_ht_cap_quirk didn't locate host bridge
>pci 0000:05:00.0: Boot video device
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: ACPI0007:01 is registered as cooling_device1
>hpet_resources: 0xfec01000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 4:375:827
>Freeing unused kernel memory: 352k freed
>Write protecting the kernel read-only data: 1112k
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:01:00.0[D] -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:01:00.0: OHCI Host Controller
>ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:01:00.0: irq 19, io mem 0xfc7fd000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: OHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25.14-108.fc9.x86_64 ohci_hcd
>usb usb1: SerialNumber: 0000:01:00.0
>ACPI: PCI Interrupt 0000:01:00.1[D] -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:01:00.1: OHCI Host Controller
>ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:01:00.1: irq 19, io mem 0xfc7fe000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25.14-108.fc9.x86_64 ohci_hcd
>usb usb2: SerialNumber: 0000:01:00.1
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>sata_sil 0000:01:0b.0: version 2.3
>ACPI: PCI Interrupt 0000:01:0b.0[A] -> GSI 17 (level, low) -> IRQ 17
>scsi0 : sata_sil
>scsi1 : sata_sil
>scsi2 : sata_sil
>scsi3 : sata_sil
>ata1: SATA max UDMA/100 mmio m1024@0xfc7ffc00 tf 0xfc7ffc80 irq 17
>ata2: SATA max UDMA/100 mmio m1024@0xfc7ffc00 tf 0xfc7ffcc0 irq 17
>ata3: SATA max UDMA/100 mmio m1024@0xfc7ffc00 tf 0xfc7ffe80 irq 17
>ata4: SATA max UDMA/100 mmio m1024@0xfc7ffc00 tf 0xfc7ffec0 irq 17
>usb 2-1: new full speed USB device using ohci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>usb 2-1: New USB device found, idVendor=0c45, idProduct=6009
>usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 2-1: Product: USB camera
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata1.00: ATA-7: Maxtor 6Y080M0, YAR51KW0, max UDMA/133
>ata1.00: 160086528 sectors, multi 16: LBA 
>ata1.00: configured for UDMA/100
>usb 2-2: new low speed USB device using ohci_hcd and address 3
>usb 2-2: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:06.0/0000:01:00.1/usb2/2-2/2-2:1.0/input/input1
>input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:01:00.1-2
>Fixing up Logitech keyboard report descriptor
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:06.0/0000:01:00.1/usb2/2-2/2-2:1.1/input/input2
>input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:01:00.1-2
>usb 2-2: New USB device found, idVendor=046d, idProduct=c517
>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-2: Product: USB Receiver
>usb 2-2: Manufacturer: Logitech
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata2.00: ATA-7: ST3250410AS, 3.AAA, max UDMA/133
>ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata2.00: configured for UDMA/100
>ata3: SATA link down (SStatus 0 SControl 310)
>ata4: SATA link down (SStatus 0 SControl 310)
>scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080M0   YAR5 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      ST3250410AS      3.AA PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 1:0:0:0: [sdb] Attached SCSI disk
>shpchp: HPC vendor_id 1022 device_id 7460 ss_vid 0 ss_did 0
>shpchp: shpc_init: cannot reserve MMIO region
>shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
>shpchp: shpc_init: cannot reserve MMIO region
>shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
>shpchp: shpc_init: cannot reserve MMIO region
>shpchp: HPC vendor_id 1022 device_id 7455 ss_vid 0 ss_did 0
>shpchp: shpc_init: cannot reserve MMIO region
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1219481455.562:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux:8192 avtab hash slots allocated. Num of rules:171095
>SELinux:8192 avtab hash slots allocated. Num of rules:171095
>security:  8 users, 12 roles, 2350 types, 116 bools, 1 sens, 1024 cats
>security:  72 classes, 171095 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1219481456.426:3): policy loaded auid=4294967295 ses=4294967295
>AMD768 RNG detected
>pata_amd 0000:00:07.1: version 0.3.10
>scsi4 : pata_amd
>scsi5 : pata_amd
>ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>ACPI: Power Button (CM) [PWRB]
>ata5.00: ATAPI: LITE-ON DVD SOHD-167T, 9S15, max UDMA/33
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>Linux video capture interface: v2.00
>input: PC Speaker as /devices/platform/pcspkr/input/input5
>ata5.00: configured for UDMA/33
>sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47pre49
>usb 2-1: SN9C10[12] PC Camera Controller detected (vid:pid 0x0C45:0x6009)
>usb 2-1: PAS106B image sensor detected
>ata6.00: ATAPI: _NEC DVD_RW ND-3540A, 1.01, max UDMA/33
>parport_pc 00:08: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>ata6.00: configured for UDMA/33
>scsi 4:0:0:0: CD-ROM            LITE-ON  DVD SOHD-167T    9S15 PQ: 0 ANSI: 5
>scsi 4:0:0:0: Attached scsi generic sg2 type 5
>scsi 5:0:0:0: CD-ROM            _NEC     DVD_RW ND-3540A  1.01 PQ: 0 ANSI: 5
>scsi 5:0:0:0: Attached scsi generic sg3 type 5
>ACPI: PCI Interrupt 0000:01:0c.0[A] -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:01:0c.0, OHCI version 1.10
>tg3.c:v3.91 (April 18, 2008)
>ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 24 (level, low) -> IRQ 24
>eth0: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000Base-T Ethernet 00:e0:81:2c:18:35
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[769c4000] dma_mask[64-bit]
>gameport: EMU10K1 is pci0000:01:0a.1/gameport0, io 0xbc00, speed 691kHz
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  173.14.05  Mon May 19 00:03:22 PDT 2008
>firewire_core: created device fw0: GUID 00e0810000302f82, S400
>usb 2-1: Initialization succeeded
>usb 2-1: V4L2 device registered as /dev/video0
>usb 2-1: Optional device control through 'sysfs' interface disabled
>usbcore: registered new interface driver sn9c102
>ppdev: user-space parallel port driver
>ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 16 (level, low) -> IRQ 16
>ALSA sound/pci/emu10k1/emu10k1_main.c:1747: vendor=0x1102, device=0x2, subsystem_vendor_id=0x201102, subsystem_id=0x20
>ALSA sound/pci/emu10k1/emu10k1_main.c:1772: Sound card name=SBLive! Value [CT4670]
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>sr 5:0:0:0: Attached scsi CD-ROM sr1
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>agpgart: Found an AGP 3.0 compliant device at 0000:04:00.0.
>agpgart: Putting AGP V3 device at 0000:04:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:05:00.0 into 8x mode
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb1, type ext3), uses xattr
>Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>powernow-k8: Power state transitions not supported
>powernow-k8: Power state transitions not supported
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure.
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: BNEP (Ethernet Emulation) ver 1.2
>Bluetooth: BNEP filters: protocol multicast
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bridge firewalling registered
>pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>agpgart: Found an AGP 3.0 compliant device at 0000:04:00.0.
>agpgart: Putting AGP V3 device at 0000:04:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:05:00.0 into 8x mode
>eth0: no IPv6 routers present
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
>NVRM: Xid (0005:00): 13, 0003 beef4201 00003062 00000308 ffffffff 00000002
>agpgart: Found an AGP 3.0 compliant device at 0000:04:00.0.
>agpgart: Putting AGP V3 device at 0000:04:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:05:00.0 into 8x mode
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts

Actions: View

Attachments on bug 454193: 311093 | 311094 | 311096 | 314868 | 314869 | 314870 | 323078