Attachment 314879 Details for Bug 459906 – my dmesg

my dmesg

dmesg_generalprotection.log (text/plain), 53.59 KB, created by Edouard Bourguignon on 2008-08-24 09:15:49 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Edouard Bourguignon

Created: 2008-08-24 09:15:49 UTC

Size: 53.59 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27-0.272.rc4.fc10.x86_64 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.3.1 20080801 (Red Hat 4.3.1-6) (GCC) ) #1 SMP Fri Aug 22 13:15:28 EDT 2008
>Command line: ro root=UUID=59e11ca6-022c-4f34-be6e-c37786990fc4 
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
> BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bf8b1000 (usable)
> BIOS-e820: 00000000bf8b1000 - 00000000bf8b7000 (reserved)
> BIOS-e820: 00000000bf8b7000 - 00000000bf9bd000 (usable)
> BIOS-e820: 00000000bf9bd000 - 00000000bfa0f000 (reserved)
> BIOS-e820: 00000000bfa0f000 - 00000000bfb08000 (usable)
> BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved)
> BIOS-e820: 00000000bfd0f000 - 00000000bfd18000 (usable)
> BIOS-e820: 00000000bfd18000 - 00000000bfd1f000 (reserved)
> BIOS-e820: 00000000bfd1f000 - 00000000bfd65000 (usable)
> BIOS-e820: 00000000bfd65000 - 00000000bfd9f000 (ACPI NVS)
> BIOS-e820: 00000000bfd9f000 - 00000000bfe00000 (ACPI data)
> BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
> BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
>last_pfn = 0xbfd65 max_arch_pfn = 0x3ffffffff
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>init_memory_mapping
> 0000000000 - 00bfc00000 page 2M
> 00bfc00000 - 00bfd65000 page 4k
>kernel direct mapping tables up to bfd65000 @ 8000-d000
>last_map_addr: bfd65000 end: bfd65000
>RAMDISK: 37d21000 - 37fefad0
>DMI present.
>ACPI: RSDP 000F72E0, 0024 (r2 PTLTD )
>ACPI: XSDT BFDF76DF, 006C (r1 SECCSD LH43STAR  6040000  LTP        0)
>ACPI: FACP BFDE8000, 00F4 (r3 INTEL  CRESTLNE  6040000 ALAN        1)
>ACPI: DSDT BFDE9000, 64AB (r2 Intel  CANTIGA   6040000 INTL 20050624)
>ACPI: FACS BFD9EFC0, 0040
>ACPI: HPET BFDFDD86, 0038 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
>ACPI: MCFG BFDFDDBE, 003C (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
>ACPI: APIC BFDFDDFA, 0068 (r1 PTLTD  	 APIC    6040000  LTP        0)
>ACPI: BOOT BFDFDE62, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
>ACPI: SLIC BFDFDE8A, 0176 (r1 SECCSD LH43STAR  6040000  LTP        0)
>ACPI: SSDT BFDE7000, 05F9 (r1  PmRef    CpuPm     3000 INTL 20050624)
>ACPI: SSDT BFDE6000, 0259 (r1  PmRef  Cpu0Tst     3000 INTL 20050624)
>ACPI: SSDT BFDE5000, 020F (r1  PmRef    ApTst     3000 INTL 20050624)
>ACPI: DMI detected: Samsung
>No NUMA configuration found
>Faking a node at 0000000000000000-00000000bfd65000
>Bootmem setup node 0 0000000000000000-00000000bfd65000
>  NODE_DATA [000000000000b000 - 000000000003efff]
>  bootmap [000000000003f000 -  0000000000056faf] pages 18
>(6 early reservations) ==> bootmem [0000000000 - 00bfd65000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 0001f72708]    TEXT DATA BSS ==> [0000200000 - 0001f72708]
>  #3 [0037d21000 - 0037fefad0]          RAMDISK ==> [0037d21000 - 0037fefad0]
>  #4 [000009e400 - 0000100000]    BIOS reserved ==> [000009e400 - 0000100000]
>  #5 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
>found SMP MP-table at [ffff8800000f7380] 000f7380
> [ffffe20000000000-ffffe200047fffff] PMD -> [ffff880002200000-ffff8800069fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[6] active PFN ranges
>    0: 0x00000000 -> 0x0000009e
>    0: 0x00000100 -> 0x000bf8b1
>    0: 0x000bf8b7 -> 0x000bf9bd
>    0: 0x000bfa0f -> 0x000bfb08
>    0: 0x000bfd0f -> 0x000bfd18
>    0: 0x000bfd1f -> 0x000bfd65
>On node 0 totalpages: 785053
>  DMA zone: 3797 pages, LIFO batch:0
>  DMA32 zone: 762734 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PM: Registered nosave memory: 000000000009e000 - 000000000009f000
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
>PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
>PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>PM: Registered nosave memory: 00000000bf8b1000 - 00000000bf8b7000
>PM: Registered nosave memory: 00000000bf9bd000 - 00000000bfa0f000
>PM: Registered nosave memory: 00000000bfb08000 - 00000000bfd0f000
>PM: Registered nosave memory: 00000000bfd18000 - 00000000bfd1f000
>Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
>PERCPU: Allocating 1654056 bytes of per cpu data
>NR_CPUS: 4096, nr_cpu_ids: 2, nr_node_ids 1
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 766531
>Policy zone: DMA32
>Kernel command line: ro root=UUID=59e11ca6-022c-4f34-be6e-c37786990fc4 
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>TSC calibrated against PM_TIMER
>Detected 2260.999 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        8191
>... CLASSHASH_SIZE:           4096
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 4095 kB
> per task-struct memory footprint: 2688 bytes
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 3029548k/3143060k available (3247k kernel code, 110664k reserved, 1880k data, 2848k init)
>CPA: page pool initialized 48 of 48 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.99 BogoMIPS (lpj=2260999)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20080609
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 06
>Using local APIC timer interrupts.
>APIC timer calibration result 16625010
>Detected 16.625 MHz APIC timer.
>lockdep: fixing up alternatives.
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4522.04 BogoMIPS (lpj=2261024)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (9044.04 BogoMIPS).
>sizeof(vma)=176 bytes
>sizeof(page)=96 bytes
>sizeof(inode)=1088 bytes
>sizeof(dentry)=256 bytes
>sizeof(ext3inode)=1488 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=9280 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>khelper used greatest stack depth: 5744 bytes left
>net_namespace: 1680 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 10:32:32  Date: 08/24/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>khelper used greatest stack depth: 4984 bytes left
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG at e0000000 - efffffff
>PCI: Using configuration type 1 for base access
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored via DMI
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
>PCI: bridge 0000:00:01.0 32bit mmio: [cc000000, ceffffff]
>PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff]
>pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>PCI: bridge 0000:00:1c.0 io port: [3000, 3fff]
>PCI: bridge 0000:00:1c.0 32bit mmio: [f3000000, f3ffffff]
>PCI: bridge 0000:00:1c.0 64bit mmio pref: [f0000000, f0ffffff]
>PCI: bridge 0000:00:1c.2 io port: [4000, 4fff]
>PCI: bridge 0000:00:1c.2 32bit mmio: [f4000000, f4ffffff]
>PCI: bridge 0000:00:1c.2 64bit mmio pref: [f1000000, f1ffffff]
>pci 0000:06:00.0: supports D1
>pci 0000:06:00.0: supports D2
>pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:06:00.0: PME# disabled
>PCI: bridge 0000:00:1c.3 io port: [5000, 5fff]
>PCI: bridge 0000:00:1c.3 32bit mmio: [f5000000, f5ffffff]
>PCI: bridge 0000:00:1c.3 64bit mmio pref: [f2000000, f2ffffff]
>pci 0000:00:1e.0: transparent bridge
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
>ACPI: Power Resource [FN00] (off)
>ACPI: Power Resource [FN01] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:05: io resource (0x5000-0x500f) overlaps 0000:00:1c.3 BAR 7 (0x5000-0x5fff), disabling
>pnp 00:05: io resource (0x5000-0x500f) overlaps 0000:06:00.0 BAR 2 (0x5000-0x50ff), disabling
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 64-bit timers, 14318180 Hz
>tracer: 1286 pages allocated for 65536 entries of 80 bytes
>   actual entries 65586
>system 00:03: iomem range 0xfed00000-0xfed003ff could not be reserved
>system 00:05: ioport range 0x680-0x69f has been reserved
>system 00:05: ioport range 0x480-0x48f has been reserved
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>system 00:05: ioport range 0xffff-0xffff has been reserved
>system 00:05: ioport range 0xffff-0xffff has been reserved
>system 00:05: ioport range 0x400-0x47f has been reserved
>system 00:05: ioport range 0x480-0x48f has been reserved
>system 00:05: ioport range 0x1180-0x11ff has been reserved
>system 00:05: ioport range 0x164e-0x164f has been reserved
>system 00:05: ioport range 0xfe00-0xfe00 has been reserved
>system 00:06: ioport range 0x6a0-0x6af has been reserved
>system 00:06: ioport range 0x6b0-0x6ff has been reserved
>system 00:0a: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>system 00:0a: iomem range 0xfed10000-0xfed13fff could not be reserved
>system 00:0a: iomem range 0xfed18000-0xfed18fff could not be reserved
>system 00:0a: iomem range 0xfed19000-0xfed19fff could not be reserved
>system 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:0a: iomem range 0xfed20000-0xfed3ffff could not be reserved
>system 00:0a: iomem range 0xfed40000-0xfed44fff could not be reserved
>system 00:0a: iomem range 0xfed45000-0xfed8ffff could not be reserved
>pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: 0x2000-0x2fff
>pci 0000:00:01.0:   MEM window: 0xcc000000-0xceffffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
>pci 0000:00:1c.0:   MEM window: 0xf3000000-0xf3ffffff
>pci 0000:00:1c.0:   PREFETCH window: 0x000000f0000000-0x000000f0ffffff
>pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
>pci 0000:00:1c.2:   IO window: 0x4000-0x4fff
>pci 0000:00:1c.2:   MEM window: 0xf4000000-0xf4ffffff
>pci 0000:00:1c.2:   PREFETCH window: 0x000000f1000000-0x000000f1ffffff
>pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
>pci 0000:00:1c.3:   IO window: 0x5000-0x5fff
>pci 0000:00:1c.3:   MEM window: 0xf5000000-0xf5ffffff
>pci 0000:00:1c.3:   PREFETCH window: 0x000000f2000000-0x000000f2ffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: disabled
>pci 0000:00:1e.0:   PREFETCH window: disabled
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffffffffffff]
>bus: 01 index 0 io port: [2000, 2fff]
>bus: 01 index 1 mmio: [cc000000, ceffffff]
>bus: 01 index 2 mmio: [d0000000, dfffffff]
>bus: 01 index 3 mmio: [0, 0]
>bus: 02 index 0 io port: [3000, 3fff]
>bus: 02 index 1 mmio: [f3000000, f3ffffff]
>bus: 02 index 2 mmio: [f0000000, f0ffffff]
>bus: 02 index 3 mmio: [0, 0]
>bus: 04 index 0 io port: [4000, 4fff]
>bus: 04 index 1 mmio: [f4000000, f4ffffff]
>bus: 04 index 2 mmio: [f1000000, f1ffffff]
>bus: 04 index 3 mmio: [0, 0]
>bus: 06 index 0 io port: [5000, 5fff]
>bus: 06 index 1 mmio: [f5000000, f5ffffff]
>bus: 06 index 2 mmio: [f2000000, f2ffffff]
>bus: 06 index 3 mmio: [0, 0]
>bus: 08 index 0 mmio: [0, 0]
>bus: 08 index 1 mmio: [0, 0]
>bus: 08 index 2 mmio: [0, 0]
>bus: 08 index 3 io port: [0, ffff]
>bus: 08 index 4 mmio: [0, ffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>debug: unmapping init memory ffff880037d21000..ffff880037ff0000
>Simple Boot Flag at 0x37 set to 0x1
>audit: initializing netlink socket (disabled)
>type=2000 audit(1219573952.903:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 5917
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0030
>pci 0000:00:1a.0: Performing full reset
>pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010
>pci 0000:00:1a.1: Performing full reset
>pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0010
>pci 0000:00:1a.2: Performing full reset
>pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0030
>pci 0000:00:1d.0: Performing full reset
>pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
>pci 0000:00:1d.1: Performing full reset
>pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
>pci 0000:00:1d.2: Performing full reset
>pci 0000:01:00.0: Boot video device
>pcieport-driver 0000:00:01.0: setting latency timer to 64
>pcieport-driver 0000:00:01.0: found MSI capability
>pci_express 0000:00:01.0:pcie00: allocate port service
>pci_express 0000:00:01.0:pcie02: allocate port service
>pci_express 0000:00:01.0:pcie03: allocate port service
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: found MSI capability
>pci_express 0000:00:1c.0:pcie00: allocate port service
>pci_express 0000:00:1c.0:pcie02: allocate port service
>pci_express 0000:00:1c.0:pcie03: allocate port service
>pcieport-driver 0000:00:1c.2: setting latency timer to 64
>pcieport-driver 0000:00:1c.2: found MSI capability
>pci_express 0000:00:1c.2:pcie00: allocate port service
>pci_express 0000:00:1c.2:pcie02: allocate port service
>pci_express 0000:00:1c.2:pcie03: allocate port service
>pcieport-driver 0000:00:1c.3: setting latency timer to 64
>pcieport-driver 0000:00:1c.3: found MSI capability
>pci_express 0000:00:1c.3:pcie00: allocate port service
>pci_express 0000:00:1c.3:pcie02: allocate port service
>pci_express 0000:00:1c.3:pcie03: allocate port service
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [LID0]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: Transitioning device [FAN0] to D3
>fan PNP0C0B:00: registered as cooling_device0
>ACPI: Fan [FAN0] (off)
>ACPI: Transitioning device [FAN1] to D3
>fan PNP0C0B:01: registered as cooling_device1
>ACPI: Fan [FAN1] (off)
>ACPI: SSDT BFD1AC20, 0265 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
>ACPI: SSDT BFD18720, 064C (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI0007:00: registered as cooling_device2
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT BFD19CA0, 01CF (r1  PmRef    ApIst     3000 INTL 20050624)
>ACPI: SSDT BFD19F20, 008D (r1  PmRef    ApCst     3000 INTL 20050624)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI0007:01: registered as cooling_device3
>ACPI: Processor [CPU1] (supports 8 throttling states)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [TZ00] (61 C)
>thermal LNXTHERM:02: registered as thermal_zone1
>ACPI: Thermal Zone [TZ01] (61 C)
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input4
>Driver 'sd' needs updating - please use bus_type methods
>ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>drivers/usb/core/inode.c: creating file 'devices'
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
>ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
>ehci_hcd 0000:00:1a.7: reset command 080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: supports USB remote wakeup
>ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf6204800
>ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: default language 0x0409
>usb usb1: uevent
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>usb 1-0:1.0: uevent
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:1a.7: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 3: status 0501 change 0001
>hub 1-0:1.0: state 7 ports 6 chg 0008 evt 0000
>drivers/usb/core/inode.c: creating file '001'
>hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27-0.272.rc4.fc10.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>drivers/usb/core/inode.c: creating file '002'
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
>ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
>ehci_hcd 0000:00:1d.7: reset command 080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: supports USB remote wakeup
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf6204c00
>ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>ehci_hcd 0000:00:1a.7: port 3 high speed
>ehci_hcd 0000:00:1a.7: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
>usb 1-3: new high speed USB device using ehci_hcd and address 2
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: default language 0x0409
>usb usb2: uevent
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>usb 2-0:1.0: uevent
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: individual port over-current protection
>hub 2-0:1.0: power on to power good time: 20ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:1a.7: port 3 high speed
>ehci_hcd 0000:00:1a.7: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
>ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
>hub 2-0:1.0: port 6: status 0501 change 0001
>drivers/usb/core/inode.c: creating file '001'
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27-0.272.rc4.fc10.x86_64 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd: block sizes: ed 80 td 96
>USB Universal Host Controller Interface driver v3.0
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '003'
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: detected 2 ports
>uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1a.0: Performing full reset
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
>usb usb3: default language 0x0409
>usb usb3: uevent
>usb usb3: usb_probe_device
>usb usb3: configuration #1 chosen from 1 choice
>usb usb3: adding 3-0:1.0 (config #1, interface 0)
>usb 3-0:1.0: uevent
>hub 3-0:1.0: usb_probe_interface
>hub 3-0:1.0: usb_probe_interface - got id
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hub 3-0:1.0: standalone hub
>hub 3-0:1.0: no power switching (usb 1.0)
>hub 3-0:1.0: individual port over-current protection
>hub 3-0:1.0: power on to power good time: 2ms
>hub 3-0:1.0: local power source is good
>hub 3-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.27-0.272.rc4.fc10.x86_64 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '004'
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: detected 2 ports
>uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1a.1: Performing full reset
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
>usb usb4: default language 0x0409
>usb usb4: uevent
>usb usb4: usb_probe_device
>usb usb4: configuration #1 chosen from 1 choice
>usb usb4: adding 4-0:1.0 (config #1, interface 0)
>usb 4-0:1.0: uevent
>hub 4-0:1.0: usb_probe_interface
>hub 4-0:1.0: usb_probe_interface - got id
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hub 4-0:1.0: standalone hub
>hub 4-0:1.0: no power switching (usb 1.0)
>hub 4-0:1.0: individual port over-current protection
>hub 4-0:1.0: power on to power good time: 2ms
>hub 4-0:1.0: local power source is good
>hub 4-0:1.0: trying to enable port power on non-switchable hub
>uhci_hcd 0000:00:1a.1: port 1 portsc 0082,00
>usb 1-3: skipped 1 descriptor after configuration
>usb 1-3: skipped 4 descriptors after interface
>usb 1-3: skipped 1 descriptor after endpoint
>usb 1-3: skipped 14 descriptors after interface
>usb 1-3: default language 0x0409
>drivers/usb/core/inode.c: creating file '001'
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.27-0.272.rc4.fc10.x86_64 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '005'
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: detected 2 ports
>uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1a.2: Performing full reset
>uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
>usb usb5: default language 0x0409
>usb usb5: uevent
>usb usb5: usb_probe_device
>usb usb5: configuration #1 chosen from 1 choice
>usb usb5: adding 5-0:1.0 (config #1, interface 0)
>usb 5-0:1.0: uevent
>hub 5-0:1.0: usb_probe_interface
>hub 5-0:1.0: usb_probe_interface - got id
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>hub 5-0:1.0: standalone hub
>hub 5-0:1.0: no power switching (usb 1.0)
>hub 5-0:1.0: individual port over-current protection
>hub 5-0:1.0: power on to power good time: 2ms
>hub 5-0:1.0: local power source is good
>hub 5-0:1.0: trying to enable port power on non-switchable hub
>usb 1-3: uevent
>usb 1-3: usb_probe_device
>usb 1-3: configuration #1 chosen from 1 choice
>usb 1-3: adding 1-3:1.0 (config #1, interface 0)
>usb 1-3:1.0: uevent
>usb 1-3: adding 1-3:1.1 (config #1, interface 1)
>usb 1-3:1.1: uevent
>drivers/usb/core/inode.c: creating file '002'
>usb 1-3: New USB device found, idVendor=174f, idProduct=5931
>usb 1-3: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>usb 1-3: Product: USB2.0 UVC PC Camera
>usb 1-3: Manufacturer: Syntek
>usb 1-3: SerialNumber: 0001
>hub 2-0:1.0: state 7 ports 6 chg 0040 evt 0000
>hub 2-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
>ehci_hcd 0000:00:1d.7: port 6 full speed --> companion
>ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003801 POWER OWNER sig=j CONNECT
>hub 2-0:1.0: port 6 not reset yet, waiting 50ms
>drivers/usb/core/inode.c: creating file '001'
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.27-0.272.rc4.fc10.x86_64 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1a.2
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '006'
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: detected 2 ports
>uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.0: Performing full reset
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
>usb usb6: default language 0x0409
>usb usb6: uevent
>usb usb6: usb_probe_device
>usb usb6: configuration #1 chosen from 1 choice
>usb usb6: adding 6-0:1.0 (config #1, interface 0)
>usb 6-0:1.0: uevent
>hub 6-0:1.0: usb_probe_interface
>hub 6-0:1.0: usb_probe_interface - got id
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>hub 6-0:1.0: standalone hub
>hub 6-0:1.0: no power switching (usb 1.0)
>hub 6-0:1.0: individual port over-current protection
>hub 6-0:1.0: power on to power good time: 2ms
>hub 6-0:1.0: local power source is good
>hub 6-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
>hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0040
>hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
>drivers/usb/core/inode.c: creating file '001'
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.27-0.272.rc4.fc10.x86_64 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.0
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '007'
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: detected 2 ports
>uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.1: Performing full reset
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
>usb usb7: default language 0x0409
>usb usb7: uevent
>usb usb7: usb_probe_device
>usb usb7: configuration #1 chosen from 1 choice
>usb usb7: adding 7-0:1.0 (config #1, interface 0)
>usb 7-0:1.0: uevent
>hub 7-0:1.0: usb_probe_interface
>hub 7-0:1.0: usb_probe_interface - got id
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>hub 7-0:1.0: standalone hub
>hub 7-0:1.0: no power switching (usb 1.0)
>hub 7-0:1.0: individual port over-current protection
>hub 7-0:1.0: power on to power good time: 2ms
>hub 7-0:1.0: local power source is good
>hub 7-0:1.0: trying to enable port power on non-switchable hub
>hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
>drivers/usb/core/inode.c: creating file '001'
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.27-0.272.rc4.fc10.x86_64 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.1
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '008'
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: detected 2 ports
>uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.2: Performing full reset
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
>usb usb8: default language 0x0409
>usb usb8: uevent
>usb usb8: usb_probe_device
>usb usb8: configuration #1 chosen from 1 choice
>usb usb8: adding 8-0:1.0 (config #1, interface 0)
>usb 8-0:1.0: uevent
>hub 8-0:1.0: usb_probe_interface
>hub 8-0:1.0: usb_probe_interface - got id
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>hub 8-0:1.0: standalone hub
>hub 8-0:1.0: no power switching (usb 1.0)
>hub 8-0:1.0: individual port over-current protection
>hub 8-0:1.0: power on to power good time: 2ms
>hub 8-0:1.0: local power source is good
>hub 8-0:1.0: trying to enable port power on non-switchable hub
>uhci_hcd 0000:00:1d.2: port 2 portsc 0093,00
>hub 8-0:1.0: port 2: status 0101 change 0001
>hub 8-0:1.0: state 7 ports 2 chg 0004 evt 0000
>drivers/usb/core/inode.c: creating file '001'
>hub 8-0:1.0: port 2, status 0101, change 0000, 12 Mb/s
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: UHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.27-0.272.rc4.fc10.x86_64 uhci_hcd
>usb usb8: SerialNumber: 0000:00:1d.2
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
>usb 8-2: new full speed USB device using uhci_hcd and address 2
>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>Marking TSC unstable due to TSC halts in idle
>usb 8-2: skipped 1 descriptor after interface
>usb 8-2: default language 0x0409
>usb 8-2: uevent
>usb 8-2: usb_probe_device
>usb 8-2: configuration #1 chosen from 1 choice
>usb 8-2: adding 8-2:1.0 (config #1, interface 0)
>usb 8-2:1.0: uevent
>usb 8-2: adding 8-2:1.1 (config #1, interface 1)
>usb 8-2:1.1: uevent
>usb 8-2: adding 8-2:1.2 (config #1, interface 2)
>usb 8-2:1.2: uevent
>usb 8-2: adding 8-2:1.3 (config #1, interface 3)
>usb 8-2:1.3: uevent
>drivers/usb/core/inode.c: creating file '002'
>usb 8-2: New USB device found, idVendor=0a5c, idProduct=2101
>usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 8-2: Product: BCM92045NMD
>usb 8-2: Manufacturer: Broadcom Corp
>usb 8-2: SerialNumber: 001FE2F78302
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 4:353:528
>debug: unmapping init memory ffffffff81f43000..ffffffff8220b000
>Write protecting the kernel read-only data: 1476k
>plymouthd used greatest stack depth: 4736 bytes left
>modprobe used greatest stack depth: 4512 bytes left
>plymouth used greatest stack depth: 4344 bytes left
>usb usb3: suspend_rh (auto-stop)
>Clocksource tsc unstable (delta = -182721954 ns)
>modprobe used greatest stack depth: 2920 bytes left
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xf6204000 port 0xf6204100 irq 19
>ata2: SATA max UDMA/133 abar m2048@0xf6204000 port 0xf6204180 irq 19
>ata3: DUMMY
>ata4: DUMMY
>ata5: SATA max UDMA/133 abar m2048@0xf6204000 port 0xf6204300 irq 19
>ata6: SATA max UDMA/133 abar m2048@0xf6204000 port 0xf6204380 irq 19
>usb usb4: suspend_rh (auto-stop)
>usb usb5: suspend_rh (auto-stop)
>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04711/0xa00000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>usb usb6: suspend_rh (auto-stop)
>usb usb7: suspend_rh (auto-stop)
>ata1.00: ATA-8: SAMSUNG HM320JI, 2SS00_01, max UDMA7
>ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, SC02, max UDMA/100, ATAPI AN
>ata2.00: applying bridge limits
>ata2.00: configured for UDMA/100
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM320JI  2SS0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633A  SC02 PQ: 0 ANSI: 5
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>modprobe used greatest stack depth: 376 bytes left
>hub 3-0:1.0: hub_suspend
>usb usb3: bus auto-suspend
>usb usb3: suspend_rh
>hub 4-0:1.0: hub_suspend
>usb usb4: bus auto-suspend
>usb usb4: suspend_rh
>hub 2-0:1.0: hub_suspend
>usb usb2: bus auto-suspend
>ehci_hcd 0000:00:1d.7: suspend root hub
>hub 5-0:1.0: hub_suspend
>usb usb5: bus auto-suspend
>usb usb5: suspend_rh
>hub 6-0:1.0: hub_suspend
>usb usb6: bus auto-suspend
>usb usb6: suspend_rh
>hub 7-0:1.0: hub_suspend
>usb usb7: bus auto-suspend
>usb usb7: suspend_rh
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>type=1404 audit(1219573959.675:2): selinux=0 auid=4294967295 ses=4294967295
>usb usb3: uevent
>usb 3-0:1.0: uevent
>usb usb4: uevent
>usb 4-0:1.0: uevent
>usb usb5: uevent
>usb 5-0:1.0: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>usb 1-3: uevent
>usb 1-3:1.0: uevent
>usb 1-3:1.1: uevent
>usb usb6: uevent
>usb 6-0:1.0: uevent
>usb usb7: uevent
>usb 7-0:1.0: uevent
>usb usb8: uevent
>usb 8-0:1.0: uevent
>usb 8-2: uevent
>usb 8-2:1.0: uevent
>usb 8-2:1.1: uevent
>usb 8-2:1.2: uevent
>usb 8-2:1.3: uevent
>usb usb2: uevent
>usb 2-0:1.0: uevent
>ACPI: AC Adapter [ADP1] (off-line)
>ACPI: Battery Slot [BAT1] (battery present)
>Linux video capture interface: v2.00
>acpi device:04: registered as cooling_device4
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input7
>ACPI: Video Device [NVID] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/input/input8
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>sky2 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>sky2 0000:06:00.0: setting latency timer to 64
>sky2 0000:06:00.0: v1.22 addr 0xf5000000 irq 19 Yukon-2 EC Ultra rev 3
>sky2 eth0: addr 00:13:77:6e:a6:60
>uvcvideo 1-3:1.0: usb_probe_interface
>uvcvideo 1-3:1.0: usb_probe_interface - got id
>uvcvideo: Found UVC 1.00 device USB2.0 UVC PC Camera (174f:5931)
>uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
>Bluetooth: Core ver 2.12
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
>ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f]
>ACPI: Device needs an ACPI driver
>input: PC Speaker as /devices/platform/pcspkr/input/input9
>Bluetooth: Generic Bluetooth USB driver ver 0.3
>btusb 8-2:1.0: usb_probe_interface
>btusb 8-2:1.0: usb_probe_interface - got id
>btusb 8-2:1.2: usb_probe_interface
>btusb 8-2:1.2: usb_probe_interface - got id
>btusb 8-2:1.3: usb_probe_interface
>btusb 8-2:1.3: usb_probe_interface - got id
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>usbcore: registered new interface driver btusb
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds
>iwlagn: Copyright(c) 2003-2008 Intel Corporation
>iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>iwlagn 0000:02:00.0: setting latency timer to 64
>iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
>iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
>iwlagn 0000:02:00.0: PCI INT A disabled
>phy0: Selected rate control algorithm 'iwl-agn-rs'
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>ALSA sound/pci/hda/hda_intel.c:2074: chipset global capabilities = 0x4401
>ALSA sound/pci/hda/hda_intel.c:755: codec_mask = 0x5
>hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3025:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3029:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3030:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:3038:    inputs: mic=0x18, fmic=0x19, line=0x0, fline=0x0, cd=0x0, aux=0x0
>ALSA sound/pci/hda/hda_generic.c:678: hda_generic: no proper input path found
>ALSA sound/pci/hda/hda_generic.c:426: hda_generic: no proper output path found
>ALSA sound/pci/hda/hda_generic.c:1021: hda_generic: no PCM found
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Surround Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Center Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave LFE Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Side Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Headphone Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Speaker Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Mono Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Line-Out Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Surround Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Center Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave LFE Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Side Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Speaker Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Mono Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave IEC958 Playback Switch, skipped
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda8, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda9, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2996080k swap on /dev/sda6.  Priority:-1 extents:1 across:2996080k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>firmware: requesting intel-ucode/06-17-06
>firmware: requesting intel-ucode/06-17-06
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>sky2 eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>iwlagn 0000:02:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
>firmware: requesting iwlwifi-5000-1.ucode
>iwlagn: iwlwifi-5000-1.ucode firmware file req failed: Reason -2
>iwlagn: Could not read microcode: -2
>iwlagn 0000:02:00.0: PCI INT A disabled
>iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>iwlagn 0000:02:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
>firmware: requesting iwlwifi-5000-1.ucode
>iwlagn: iwlwifi-5000-1.ucode firmware file req failed: Reason -2
>iwlagn: Could not read microcode: -2
>iwlagn 0000:02:00.0: PCI INT A disabled
>atkbd.c: Unknown key pressed (translated set 2, code 0x89 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e009 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0x89 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e009 <keycode>' to make it known.
>mtrr: base(0xd0000000) is not aligned on a size(0xff00000) boundary
>sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html
>eth0: no IPv6 routers present
>atkbd.c: Unknown key pressed (translated set 2, code 0x89 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e009 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0x89 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e009 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0x89 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e009 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0x89 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e009 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0x89 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e009 <keycode>' to make it known.
>fuse init (API version 7.9)
>at-spi-registry[2992]: segfault at 0 ip 0000003b17c7c4b3 sp 00007fff44c26380 error 4 in libc-2.8.90.so[3b17c00000+16c000]
>ALSA sound/pci/hda/hda_intel.c:1395: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1395: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1395: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x7, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1395: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x7, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x7
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x7
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
>atkbd.c: Unknown key pressed (translated set 2, code 0x89 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e009 <keycode>' to make it known.
>Bluetooth: L2CAP ver 2.10
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.10
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
>gnome-power-man[3166]: segfault at 50073010e ip 00000000004105c1 sp 00007fffe5ea3170 error 4 in gnome-power-manager[400000+4b000]
>mtrr: no MTRR for d0000000,ff00000 found
>mtrr: base(0xd0000000) is not aligned on a size(0xff00000) boundary
>evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html
>at-spi-registry[4492]: segfault at 0 ip 0000003b17c7c4b3 sp 00007fffbc0752c0 error 4 in libc-2.8.90.so[3b17c00000+16c000]
>ALSA sound/pci/hda/hda_intel.c:1395: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1395: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1395: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x7, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1395: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x7, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x7
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x7
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
>gnome-power-man[4645] general protection ip:4105c1 sp:7fffc39ea180 error:0 in gnome-power-manager[400000+4b000]
>mtrr: no MTRR for d0000000,ff00000 found
>mtrr: base(0xd0000000) is not aligned on a size(0xff00000) boundary
>evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html
>at-spi-registry[6314]: segfault at 0 ip 0000003b17c7c4b3 sp 00007fffd30fbab0 error 4 in libc-2.8.90.so[3b17c00000+16c000]
>ALSA sound/pci/hda/hda_intel.c:1395: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1395: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1395: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x7, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1395: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x7, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x7
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x7
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
>gnome-power-man[6470] general protection ip:4105c1 sp:7fff3726ec20 error:0 in gnome-power-manager[400000+4b000]
>gpk-update-icon[6439] general protection ip:3b21c104a8 sp:7fffd1850e18 error:0 in libpackagekit.so.4.0.0[3b21c00000+24000]

Actions: View

Attachments on bug 459906: 314879